netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tom Herbert <tom@herbertland.com>
To: Justin Iurman <justin.iurman@uliege.be>
Cc: Linux Kernel Network Developers <netdev@vger.kernel.org>,
	"David S. Miller" <davem@davemloft.net>
Subject: Re: [PATCH net-next 2/5] ipv6: IOAM tunnel decapsulation
Date: Wed, 24 Jun 2020 19:32:11 -0700	[thread overview]
Message-ID: <CALx6S374PQ7GGA_ey6wCwc55hUzOx+2kWT=96TzyF0=g=8T=WA@mail.gmail.com> (raw)
In-Reply-To: <20200624192310.16923-3-justin.iurman@uliege.be>

On Wed, Jun 24, 2020 at 12:33 PM Justin Iurman <justin.iurman@uliege.be> wrote:
>
> Implement the IOAM egress behavior.
>
> According to RFC 8200:
> "Extension headers (except for the Hop-by-Hop Options header) are not
>  processed, inserted, or deleted by any node along a packet's delivery
>  path, until the packet reaches the node (or each of the set of nodes,
>  in the case of multicast) identified in the Destination Address field
>  of the IPv6 header."
>
> Therefore, an ingress node (an IOAM domain border) must encapsulate an
> incoming IPv6 packet with another similar IPv6 header that will contain
> IOAM data while it traverses the domain. When leaving, the egress node,
> another IOAM domain border which is also the tunnel destination, must
> decapsulate the packet.

This is just IP in IP encapsulation that happens to be terminated at
an egress node of the IOAM domain. The fact that it's IOAM isn't
germaine, this IP in IP is done in a variety of ways. We should be
using the normal protocol handler for NEXTHDR_IPV6  instead of special
case code.

>
> Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
> ---
>  include/linux/ipv6.h |  1 +
>  net/ipv6/ip6_input.c | 22 ++++++++++++++++++++++
>  2 files changed, 23 insertions(+)
>
> diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
> index 2cb445a8fc9e..5312a718bc7a 100644
> --- a/include/linux/ipv6.h
> +++ b/include/linux/ipv6.h
> @@ -138,6 +138,7 @@ struct inet6_skb_parm {
>  #define IP6SKB_HOPBYHOP        32
>  #define IP6SKB_L3SLAVE         64
>  #define IP6SKB_JUMBOGRAM      128
> +#define IP6SKB_IOAM           256
>  };
>
>  #if defined(CONFIG_NET_L3_MASTER_DEV)
> diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
> index e96304d8a4a7..8cf75cc5e806 100644
> --- a/net/ipv6/ip6_input.c
> +++ b/net/ipv6/ip6_input.c
> @@ -361,9 +361,11 @@ INDIRECT_CALLABLE_DECLARE(int tcp_v6_rcv(struct sk_buff *));
>  void ip6_protocol_deliver_rcu(struct net *net, struct sk_buff *skb, int nexthdr,
>                               bool have_final)
>  {
> +       struct inet6_skb_parm *opt = IP6CB(skb);
>         const struct inet6_protocol *ipprot;
>         struct inet6_dev *idev;
>         unsigned int nhoff;
> +       u8 hop_limit;
>         bool raw;
>
>         /*
> @@ -450,6 +452,25 @@ void ip6_protocol_deliver_rcu(struct net *net, struct sk_buff *skb, int nexthdr,
>         } else {
>                 if (!raw) {
>                         if (xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
> +                               /* IOAM Tunnel Decapsulation
> +                                * Packet is going to re-enter the stack
> +                                */
> +                               if (nexthdr == NEXTHDR_IPV6 &&
> +                                   (opt->flags & IP6SKB_IOAM)) {
> +                                       hop_limit = ipv6_hdr(skb)->hop_limit;
> +
> +                                       skb_reset_network_header(skb);
> +                                       skb_reset_transport_header(skb);
> +                                       skb->encapsulation = 0;
> +
> +                                       ipv6_hdr(skb)->hop_limit = hop_limit;
> +                                       __skb_tunnel_rx(skb, skb->dev,
> +                                                       dev_net(skb->dev));
> +
> +                                       netif_rx(skb);
> +                                       goto out;
> +                               }
> +
>                                 __IP6_INC_STATS(net, idev,
>                                                 IPSTATS_MIB_INUNKNOWNPROTOS);
>                                 icmpv6_send(skb, ICMPV6_PARAMPROB,
> @@ -461,6 +482,7 @@ void ip6_protocol_deliver_rcu(struct net *net, struct sk_buff *skb, int nexthdr,
>                         consume_skb(skb);
>                 }
>         }
> +out:
>         return;
>
>  discard:
> --
> 2.17.1
>

  reply	other threads:[~2020-06-25  2:32 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-24 19:23 [PATCH net-next 0/5] Data plane support for IOAM Pre-allocated Trace with IPv6 Justin Iurman
2020-06-24 19:23 ` [PATCH net-next 1/5] ipv6: eh: Introduce removable TLVs Justin Iurman
2020-06-24 20:32   ` Tom Herbert
2020-06-25 17:47     ` Justin Iurman
2020-06-25 20:53       ` Tom Herbert
2020-06-26  8:22         ` Justin Iurman
2020-06-26 15:39           ` Tom Herbert
2020-06-26 17:14             ` Justin Iurman
2020-06-26 18:35               ` Tom Herbert
2020-06-24 19:23 ` [PATCH net-next 2/5] ipv6: IOAM tunnel decapsulation Justin Iurman
2020-06-25  2:32   ` Tom Herbert [this message]
2020-06-25 17:56     ` Justin Iurman
2020-06-26  0:48       ` Tom Herbert
2020-06-26  8:31         ` Justin Iurman
2020-06-26 15:52           ` Tom Herbert
2020-06-24 19:23 ` [PATCH net-next 3/5] ipv6: ioam: Data plane support for Pre-allocated Trace Justin Iurman
2020-06-24 21:37   ` kernel test robot
2020-06-24 23:11   ` kernel test robot
2020-06-24 23:11   ` [RFC PATCH] ipv6: ioam: ioam6_fill_trace_data_node() can be static kernel test robot
2020-06-25  2:42   ` [PATCH net-next 3/5] ipv6: ioam: Data plane support for Pre-allocated Trace Tom Herbert
2020-06-25 14:29   ` Tom Herbert
2020-06-25 18:23     ` Justin Iurman
2020-06-25 20:32       ` Tom Herbert
2020-06-26  8:13         ` Justin Iurman
2020-06-26 14:53           ` Tom Herbert
2020-06-24 19:23 ` [PATCH net-next 4/5] ipv6: ioam: Generic Netlink to configure IOAM Justin Iurman
2020-06-25 10:52   ` Dan Carpenter
2020-06-26  8:54     ` [PATCH net-next] Fix unchecked dereference Justin Iurman
2020-06-26 16:01       ` Jakub Kicinski
2020-06-26 17:23         ` Justin Iurman
2020-06-27  4:04           ` Jakub Kicinski
2020-06-24 19:23 ` [PATCH net-next 5/5] ipv6: ioam: Documentation for new IOAM sysctls Justin Iurman
2020-06-25  2:53   ` Tom Herbert
2020-06-25 18:00     ` Justin Iurman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CALx6S374PQ7GGA_ey6wCwc55hUzOx+2kWT=96TzyF0=g=8T=WA@mail.gmail.com' \
    --to=tom@herbertland.com \
    --cc=davem@davemloft.net \
    --cc=justin.iurman@uliege.be \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).