netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pravin Shelar <pshelar@ovn.org>
To: "Yang, Yi" <yi.y.yang@intel.com>
Cc: Linux Kernel Network Developers <netdev@vger.kernel.org>,
	ovs dev <dev@openvswitch.org>, Jiri Benc <jbenc@redhat.com>,
	Eric Garver <e@erig.me>, "David S. Miller" <davem@davemloft.net>
Subject: Re: [PATCH net-next v15] openvswitch: enable NSH support
Date: Sat, 4 Nov 2017 05:30:04 -0700	[thread overview]
Message-ID: <CAOrHB_AZMFtysihFzH1wPEq9Mnph39vMZ4yaL5NBrdcoR1wyqA@mail.gmail.com> (raw)
In-Reply-To: <20171103014027.GA45072@localhost.localdomain>

On Thu, Nov 2, 2017 at 6:40 PM, Yang, Yi <yi.y.yang@intel.com> wrote:
> On Thu, Nov 02, 2017 at 05:06:47AM -0700, Pravin Shelar wrote:
>> On Wed, Nov 1, 2017 at 7:50 PM, Yang, Yi <yi.y.yang@intel.com> wrote:
>> > On Thu, Nov 02, 2017 at 08:52:40AM +0800, Pravin Shelar wrote:
>> >> On Tue, Oct 31, 2017 at 9:03 PM, Yi Yang <yi.y.yang@intel.com> wrote:
>> >> >
>> >> > OVS master and 2.8 branch has merged NSH userspace
>> >> > patch series, this patch is to enable NSH support
>> >> > in kernel data path in order that OVS can support
>> >> > NSH in compat mode by porting this.
>> >> >
>> >> > Signed-off-by: Yi Yang <yi.y.yang@intel.com>
>> >> > ---
>> >> I have comment related to checksum, otherwise patch looks good to me.
>> >
>> > Pravin, thank you for your comments, the below part is incremental patch
>> > for checksum, please help check it, I'll send out v16 with this after
>> > you confirm.
>> >
>> This change looks good to me.
>> I noticed couple of more issues.
>> 1. Can you move the ovs_key_nsh to the union of ipv4 an ipv6?
>> ipv4/ipv6/nsh key data is mutually exclusive so there is no need for
>> separate space for nsh key in the ovs key.
>> 2. We need to fix match_validate() with nsh check. Datapath can not
>> allow any l3 or l4 match if the flow key contains nsh match and
>> vice-versa. such flow key should be rejected.
>
> Pravin, the below incremental patch should fix the issues you pionted
> out, please help confirm/ack, then I'll send out v16 with all acks
> from you all for merge. BTW, it has been verified in my sfc test
> environment.
>
Following patch looks good to me. But I think we needs similar
eth_type check for nsh set action in validate_set() and in
__ovs_nla_copy_actions() for NSH_POP action.

Can you send patch with all changes?

Thanks.

> diff --git a/net/openvswitch/flow.h b/net/openvswitch/flow.h
> index 8eeae749..c670dd2 100644
> --- a/net/openvswitch/flow.h
> +++ b/net/openvswitch/flow.h
> @@ -149,8 +149,8 @@ struct sw_flow_key {
>                                 } nd;
>                         };
>                 } ipv6;
> +               struct ovs_key_nsh nsh;         /* network service header */
>         };
> -       struct ovs_key_nsh nsh;         /* network service header */
>         struct {
>                 /* Connection tracking fields not packed above. */
>                 struct {
> diff --git a/net/openvswitch/flow_netlink.c b/net/openvswitch/flow_netlink.c
> index 0d7d4ae..090103c 100644
> --- a/net/openvswitch/flow_netlink.c
> +++ b/net/openvswitch/flow_netlink.c
> @@ -178,7 +178,8 @@ static bool match_validate(const struct sw_flow_match *match,
>                         | (1 << OVS_KEY_ATTR_ICMPV6)
>                         | (1 << OVS_KEY_ATTR_ARP)
>                         | (1 << OVS_KEY_ATTR_ND)
> -                       | (1 << OVS_KEY_ATTR_MPLS));
> +                       | (1 << OVS_KEY_ATTR_MPLS)
> +                       | (1 << OVS_KEY_ATTR_NSH));
>
>         /* Always allowed mask fields. */
>         mask_allowed |= ((1 << OVS_KEY_ATTR_TUNNEL)
> @@ -287,6 +288,14 @@ static bool match_validate(const struct sw_flow_match *match,
>                 }
>         }
>
> +       if (match->key->eth.type == htons(ETH_P_NSH)) {
> +               key_expected |= 1 << OVS_KEY_ATTR_NSH;
> +               if (match->mask &&
> +                   match->mask->key.eth.type == htons(0xffff)) {
> +                       mask_allowed |= 1 << OVS_KEY_ATTR_NSH;
> +               }
> +       }
> +
>         if ((key_attrs & key_expected) != key_expected) {
>                 /* Key attributes check failed. */
>                 OVS_NLERR(log, "Missing key (keys=%llx, expected=%llx)",

  reply	other threads:[~2017-11-04 12:30 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-01  4:03 [PATCH net-next v15] openvswitch: enable NSH support Yi Yang
2017-11-01  8:46 ` Jiri Benc
2017-11-01 15:21 ` Eric Garver
2017-11-02  0:52 ` Pravin Shelar
2017-11-02  2:50   ` Yang, Yi
2017-11-02 12:06     ` Pravin Shelar
     [not found]       ` <CAOrHB_BaUS7WfisvX6G+450tEQ2skmsE0v-b27s-_21s25bigw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-11-02 12:09         ` Yang, Yi
2017-11-03  1:40         ` Yang, Yi
2017-11-04 12:30           ` Pravin Shelar [this message]
     [not found] ` <1509508981-66202-1-git-send-email-yi.y.yang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2017-11-04 14:29   ` Pravin Shelar
2017-11-06  4:19     ` Yang, Yi
2017-11-06 12:09       ` Pravin Shelar
     [not found]     ` <CAOrHB_COGWb78kN70QFKgA3w5v3zasAW=TJbzoE5zZYKao_GvA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-11-06 12:22       ` Jiri Benc
     [not found]         ` <20171106132248.6fa4c5a0-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2017-11-07 10:57           ` Pravin Shelar
2017-11-07 11:28             ` Yang, Yi
     [not found]               ` <20171107112833.GA56179-re2EX8HDrk21gSHoDXDV2kEOCMrvLtNR@public.gmane.org>
2017-11-07 11:58                 ` Pravin Shelar
     [not found]                   ` <CAOrHB_D2khYGGJxNA8hpE4Qnhm7ONKrH=kcNteV=iYWLRnaGHQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-11-07 11:55                     ` Yang, Yi
2017-11-07 13:01                       ` Pravin Shelar
2017-11-07 13:09                         ` Yang, Yi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAOrHB_AZMFtysihFzH1wPEq9Mnph39vMZ4yaL5NBrdcoR1wyqA@mail.gmail.com \
    --to=pshelar@ovn.org \
    --cc=davem@davemloft.net \
    --cc=dev@openvswitch.org \
    --cc=e@erig.me \
    --cc=jbenc@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=yi.y.yang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).