netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Russell King <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>, netdev@vger.kernel.org
Subject: [RFC net-next 2/5] net: phylink: add separate pcs operations structure
Date: Tue, 17 Mar 2020 14:52:51 +0000	[thread overview]
Message-ID: <E1jEDaN-0008JH-MY@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <20200317144944.GP25745@shell.armlinux.org.uk>

*NOT FOR MERGING*

Add a separate set of PCS operations, which MAC drivers can use to
couple phylink with their associated MAC PCS layer.  The PCS
operations include:

- pcs_get_state() - reads the link up/down, resolved speed, duplex
   and pause from the PCS.
- pcs_config() - configures the PCS for the specified mode, PHY
   interface type, and setting the advertisement.
- pcs_an_restart() - restarts 802.3 in-band negotiation with the
   link partner
- pcs_link_up() - informs the PCS that link has come up, and the
   parameters of the link. Link parameters are used to program the
   PCS for fixed speed and non-inband modes.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 76 +++++++++++++++++++++++++++------------
 include/linux/phylink.h   | 11 ++++++
 2 files changed, 65 insertions(+), 22 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index a34a3be92dba..abe2cc168f93 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -41,6 +41,7 @@ struct phylink {
 	/* private: */
 	struct net_device *netdev;
 	const struct phylink_mac_ops *mac_ops;
+	const struct phylink_pcs_ops *pcs_ops;
 	struct phylink_config *config;
 	struct device *dev;
 	unsigned int old_link_state:1;
@@ -425,11 +426,31 @@ static void phylink_mac_config_up(struct phylink *pl,
 		phylink_mac_config(pl, state);
 }
 
-static void phylink_mac_an_restart(struct phylink *pl)
+static void phylink_mac_pcs_an_restart(struct phylink *pl)
 {
 	if (pl->link_config.an_enabled &&
-	    phy_interface_mode_is_8023z(pl->link_config.interface))
-		pl->mac_ops->mac_an_restart(pl->config);
+	    phy_interface_mode_is_8023z(pl->link_config.interface)) {
+		if (pl->pcs_ops)
+			pl->pcs_ops->pcs_an_restart(pl->config);
+		else
+			pl->mac_ops->mac_an_restart(pl->config);
+	}
+}
+
+static void phylink_pcs_config(struct phylink *pl, bool force_restart,
+			       const struct phylink_link_state *state)
+{
+	bool restart = force_restart;
+
+	if (pl->pcs_ops && pl->pcs_ops->pcs_config(pl->config,
+						   pl->cur_link_an_mode,
+						   state))
+		restart = true;
+
+	phylink_mac_config(pl, state);
+
+	if (restart)
+		phylink_mac_pcs_an_restart(pl);
 }
 
 static void phylink_mac_pcs_get_state(struct phylink *pl,
@@ -445,7 +466,10 @@ static void phylink_mac_pcs_get_state(struct phylink *pl,
 	state->an_complete = 0;
 	state->link = 1;
 
-	pl->mac_ops->mac_pcs_get_state(pl->config, state);
+	if (pl->pcs_ops)
+		pl->pcs_ops->pcs_get_state(pl->config, state);
+	else
+		pl->mac_ops->mac_pcs_get_state(pl->config, state);
 }
 
 /* The fixed state is... fixed except for the link state,
@@ -463,7 +487,7 @@ static void phylink_get_fixed_state(struct phylink *pl,
 	phylink_resolve_flow(state);
 }
 
-static void phylink_mac_initial_config(struct phylink *pl)
+static void phylink_mac_initial_config(struct phylink *pl, bool force_restart)
 {
 	struct phylink_link_state link_state;
 
@@ -489,7 +513,7 @@ static void phylink_mac_initial_config(struct phylink *pl)
 	link_state.link = false;
 
 	phylink_apply_manual_flow(pl, &link_state);
-	phylink_mac_config(pl, &link_state);
+	phylink_pcs_config(pl, force_restart, &link_state);
 }
 
 static const char *phylink_pause_to_str(int pause)
@@ -506,12 +530,18 @@ static const char *phylink_pause_to_str(int pause)
 	}
 }
 
-static void phylink_mac_link_up(struct phylink *pl,
-				struct phylink_link_state link_state)
+static void phylink_link_up(struct phylink *pl,
+			    struct phylink_link_state link_state)
 {
 	struct net_device *ndev = pl->netdev;
 
 	pl->cur_interface = link_state.interface;
+
+	if (pl->pcs_ops && pl->pcs_ops->pcs_link_up)
+		pl->pcs_ops->pcs_link_up(pl->config, pl->cur_link_an_mode,
+					 pl->cur_interface,
+					 link_state.speed, link_state.duplex);
+
 	pl->mac_ops->mac_link_up(pl->config, pl->phydev,
 				 pl->cur_link_an_mode, pl->cur_interface,
 				 link_state.speed, link_state.duplex,
@@ -528,7 +558,7 @@ static void phylink_mac_link_up(struct phylink *pl,
 		     phylink_pause_to_str(link_state.pause));
 }
 
-static void phylink_mac_link_down(struct phylink *pl)
+static void phylink_link_down(struct phylink *pl)
 {
 	struct net_device *ndev = pl->netdev;
 
@@ -597,9 +627,9 @@ static void phylink_resolve(struct work_struct *w)
 	if (link_changed) {
 		pl->old_link_state = link_state.link;
 		if (!link_state.link)
-			phylink_mac_link_down(pl);
+			phylink_link_down(pl);
 		else
-			phylink_mac_link_up(pl, link_state);
+			phylink_link_up(pl, link_state);
 	}
 	if (!link_state.link && pl->mac_link_dropped) {
 		pl->mac_link_dropped = false;
@@ -746,6 +776,12 @@ struct phylink *phylink_create(struct phylink_config *config,
 }
 EXPORT_SYMBOL_GPL(phylink_create);
 
+void phylink_add_pcs(struct phylink *pl, const struct phylink_pcs_ops *ops)
+{
+	pl->pcs_ops = ops;
+}
+EXPORT_SYMBOL_GPL(phylink_add_pcs);
+
 /**
  * phylink_destroy() - cleanup and destroy the phylink instance
  * @pl: a pointer to a &struct phylink returned from phylink_create()
@@ -1082,14 +1118,12 @@ void phylink_start(struct phylink *pl)
 	/* Apply the link configuration to the MAC when starting. This allows
 	 * a fixed-link to start with the correct parameters, and also
 	 * ensures that we set the appropriate advertisement for Serdes links.
-	 */
-	phylink_mac_initial_config(pl);
-
-	/* Restart autonegotiation if using 802.3z to ensure that the link
+	 *
+	 * Restart autonegotiation if using 802.3z to ensure that the link
 	 * parameters are properly negotiated.  This is necessary for DSA
 	 * switches using 802.3z negotiation to ensure they see our modes.
 	 */
-	phylink_mac_an_restart(pl);
+	phylink_mac_initial_config(pl, true);
 
 	clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
 	phylink_run_resolve(pl);
@@ -1386,8 +1420,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 			 * advertisement; the only thing we have is the pause
 			 * modes which can only come from a PHY.
 			 */
-			phylink_mac_config(pl, &pl->link_config);
-			phylink_mac_an_restart(pl);
+			phylink_pcs_config(pl, true, &pl->link_config);
 		}
 		mutex_unlock(&pl->state_mutex);
 	}
@@ -1415,7 +1448,7 @@ int phylink_ethtool_nway_reset(struct phylink *pl)
 
 	if (pl->phydev)
 		ret = phy_restart_aneg(pl->phydev);
-	phylink_mac_an_restart(pl);
+	phylink_mac_pcs_an_restart(pl);
 
 	return ret;
 }
@@ -1494,8 +1527,7 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
 				   pause->tx_pause);
 	} else if (!test_bit(PHYLINK_DISABLE_STOPPED,
 			     &pl->phylink_disable_state)) {
-		phylink_mac_config(pl, &pl->link_config);
-		phylink_mac_an_restart(pl);
+		phylink_pcs_config(pl, true, &pl->link_config);
 	}
 	mutex_unlock(&pl->state_mutex);
 
@@ -1901,7 +1933,7 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode,
 
 	if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
 				 &pl->phylink_disable_state))
-		phylink_mac_initial_config(pl);
+		phylink_mac_initial_config(pl, false);
 
 	return ret;
 }
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 8fa6df3b881b..dc27dd341ebd 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -97,6 +97,16 @@ struct phylink_mac_ops {
 			    bool tx_pause, bool rx_pause);
 };
 
+struct phylink_pcs_ops {
+	void (*pcs_get_state)(struct phylink_config *config,
+			      struct phylink_link_state *state);
+	int (*pcs_config)(struct phylink_config *config, unsigned int mode,
+			  const struct phylink_link_state *state);
+	void (*pcs_an_restart)(struct phylink_config *config);
+	void (*pcs_link_up)(struct phylink_config *config, unsigned int mode,
+			    phy_interface_t interface, int speed, int duplex);
+};
+
 #if 0 /* For kernel-doc purposes only. */
 /**
  * validate - Validate and update the link configuration
@@ -273,6 +283,7 @@ void mac_link_up(struct phylink_config *config, struct phy_device *phy,
 struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
 			       phy_interface_t iface,
 			       const struct phylink_mac_ops *ops);
+void phylink_add_pcs(struct phylink *, const struct phylink_pcs_ops *ops);
 void phylink_destroy(struct phylink *);
 
 int phylink_connect_phy(struct phylink *, struct phy_device *);
-- 
2.20.1


  parent reply	other threads:[~2020-03-17 14:53 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-17 14:49 [RFC net-next 0/2] split phylink PCS operations and add PCS support for dpaa2 Russell King - ARM Linux admin
2020-03-17 14:52 ` [RFC net-next 1/5] net: phylink: rename 'ops' to 'mac_ops' Russell King
2020-03-17 16:20   ` Andrew Lunn
2020-03-17 14:52 ` Russell King [this message]
2020-03-17 15:48   ` [RFC net-next 2/5] net: phylink: add separate pcs operations structure Jose Abreu
2020-03-17 15:56     ` Russell King - ARM Linux admin
2020-03-17 16:04       ` Jose Abreu
2020-03-17 16:52         ` Russell King - ARM Linux admin
2020-03-18  7:45           ` Jose Abreu
2020-03-19 11:14             ` Russell King - ARM Linux admin
2020-03-20  9:55               ` Jose Abreu
2020-03-17 16:38   ` Andrew Lunn
2020-03-17 16:54     ` Russell King - ARM Linux admin
2020-03-19 12:14       ` Russell King - ARM Linux admin
2020-03-19 15:06         ` Andrew Lunn
2020-03-19 17:20           ` Russell King - ARM Linux admin
2020-03-19 20:59           ` Russell King - ARM Linux admin
2020-03-24 19:46           ` Russell King - ARM Linux admin
2020-03-17 14:52 ` [RFC net-next 3/5] arm64: dts: lx2160a: add PCS MDIO nodes Russell King
2020-03-26 21:14   ` Ioana Ciornei
2020-03-26 21:21     ` Russell King - ARM Linux admin
2020-03-26 21:26       ` Ioana Ciornei
2020-03-17 14:53 ` [RFC net-next 4/5] dpaa2-mac: add 1000BASE-X/SGMII PCS support Russell King
2020-03-26 22:09   ` Ioana Ciornei
2020-03-17 14:53 ` [RFC net-next 5/5] dpaa2-mac: add 10GBASE-R " Russell King
2020-03-26 14:57 ` [RFC net-next 0/2] split phylink PCS operations and add PCS support for dpaa2 Russell King - ARM Linux admin
2020-03-26 15:04   ` Andrew Lunn
2020-03-26 15:14 ` [PATCH " Russell King - ARM Linux admin
2020-03-30  4:57   ` David Miller
2020-03-30  8:44     ` Russell King - ARM Linux admin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1jEDaN-0008JH-MY@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).