Netdev Archive on lore.kernel.org
 help / color / Atom feed
From: Radhey Shyam Pandey <radheys@xilinx.com>
To: Andre Przywara <andre.przywara@arm.com>
Cc: "David S . Miller" <davem@davemloft.net>,
	Michal Simek <michals@xilinx.com>,
	Robert Hancock <hancock@sedsystems.ca>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH 12/14] net: axienet: Autodetect 64-bit DMA capability
Date: Wed, 15 Jan 2020 06:02:03 +0000
Message-ID: <MN2PR02MB7007DF6B24EABA513274B489C7370@MN2PR02MB7007.namprd02.prod.outlook.com> (raw)
In-Reply-To: <20200114174144.6e8c6387@donnerap.cambridge.arm.com>

> -----Original Message-----
> From: Andre Przywara <andre.przywara@arm.com>
> Sent: Tuesday, January 14, 2020 11:12 PM
> To: Radhey Shyam Pandey <radheys@xilinx.com>
> Cc: David S . Miller <davem@davemloft.net>; Michal Simek
> <michals@xilinx.com>; Robert Hancock <hancock@sedsystems.ca>;
> netdev@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org
> Subject: Re: [PATCH 12/14] net: axienet: Autodetect 64-bit DMA capability
> 
> On Tue, 14 Jan 2020 17:03:41 +0000
> Radhey Shyam Pandey <radheys@xilinx.com> wrote:
> 
> Hi,
> 
> > > -----Original Message-----
> > > From: Andre Przywara <andre.przywara@arm.com>
> > > Sent: Friday, January 10, 2020 5:24 PM
> > > To: David S . Miller <davem@davemloft.net>; Radhey Shyam Pandey
> > > <radheys@xilinx.com>
> > > Cc: Michal Simek <michals@xilinx.com>; Robert Hancock
> > > <hancock@sedsystems.ca>; netdev@vger.kernel.org; linux-arm-
> > > kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> > > Subject: [PATCH 12/14] net: axienet: Autodetect 64-bit DMA
> > > capability
> > >
> > > When newer revisions of the Axienet IP are configured for a 64-bit
> > > bus,
> > I assume in design axidma address width is set to 64-bits.
> 
> So I wrote "64-bit bus" here, but really meant: "address bus wider than 32 bits".
> In our case it's set to 40 bits, because that's how wide the other busses in the
> system are.
> And we have memory from 2GB to 4GB, and from 34GB till 40GB, but not in-
> between (VExpress/Juno memory layout).
> 
> > If not, please provide an overview of the design connections.
> 
> The exact parameter name from PG021 is: "Address Width (32-64) /
> c_addr_width".
Thanks. It's right.

> 
> > > we *need* to write to the MSB part of the an address registers,
> > > otherwise the IP won't recognise this as a DMA start condition.
> > > This is even true when the actual DMA address comes from the lower 4 GB.
> > >
> > > To autodetect this configuration, at probe time we write all 1's to
> > > such
> > Is reading address width axidma IP user parameter(c_addr_width) from
> > the design not sufficient to detect configured bus width?
> 
> What do you mean by that? Reading from where? Is there a way to access those
> parameters from a running system?
Hardware design data i.e IP parameter can be accessed using hsi in-built commands.
Please refer to ug1138-generating-basic-software-platforms.pdf, chapter-4.
The same flow is used in DT,  xilinx device tree generator parses HDF and read IP 
parameters and populate DT binding.

> 
> Cheers,
> Andre.
> 
> > > an MSB register, and see if any bits stick. If this is configured
> > > for a 32-bit bus, those MSB registers are RES0, so reading back 0
> > > indicates that no MSB writes are necessary.
> > > On the other hands reading anything other than 0 indicated the need
> > > to write the MSB registers, so we set the respective flag.
> > >
> > > For now this leaves the actual DMA mask at 32-bit, as we can't
> > > reliably detect the actually wired number of address lines beyond 32.
> > >
> > > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> > > ---
> > >  drivers/net/ethernet/xilinx/xilinx_axienet.h  |  1 +
> > > .../net/ethernet/xilinx/xilinx_axienet_main.c | 27
> > > +++++++++++++++++++
> > >  2 files changed, 28 insertions(+)
> > >
> > > diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h
> > > b/drivers/net/ethernet/xilinx/xilinx_axienet.h
> > > index 4aea4c23d3bb..4feaaa02819c 100644
> > > --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
> > > +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
> > > @@ -161,6 +161,7 @@
> > >  #define XAE_FCC_OFFSET		0x0000040C /* Flow Control
> > > Configuration */
> > >  #define XAE_EMMC_OFFSET		0x00000410 /* EMAC mode
> > > configuration */
> > >  #define XAE_PHYC_OFFSET		0x00000414 /* RGMII/SGMII
> > > configuration */
> > > +#define XAE_ID_OFFSET		0x000004F8 /* Identification register
> > > */
> > >  #define XAE_MDIO_MC_OFFSET	0x00000500 /* MII Management
> > > Config */
> > >  #define XAE_MDIO_MCR_OFFSET	0x00000504 /* MII Management
> > > Control */
> > >  #define XAE_MDIO_MWD_OFFSET	0x00000508 /* MII Management Write
> > > Data */
> > > diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> > > b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> > > index 133f088d797e..f7f593df0c11 100644
> > > --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> > > +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> > > @@ -151,6 +151,9 @@ static void axienet_dma_out_addr(struct
> > > axienet_local *lp, off_t reg,
> > >  				 dma_addr_t addr)
> > >  {
> > >  	axienet_dma_out32(lp, reg, lower_32_bits(addr));
> > > +
> > > +	if (lp->features & XAE_FEATURE_DMA_64BIT)
> > > +		axienet_dma_out32(lp, reg + 4, upper_32_bits(addr));
> > >  }
> > >
> > >  static void desc_set_phys_addr(struct axienet_local *lp, dma_addr_t
> > > addr, @@ -1934,6 +1937,30 @@ static int axienet_probe(struct
> > > platform_device
> > > *pdev)
> > >  		goto free_netdev;
> > >  	}
> > >
> > > +	/*
> > > +	 * Autodetect the need for 64-bit DMA pointers.
> > > +	 * When the IP is configured for a bus width bigger than 32 bits,
> > > +	 * writing the MSB registers is mandatory, even if they are all 0.
> > > +	 * We can detect this case by writing all 1's to one such register
> > > +	 * and see if that sticks: when the IP is configured for 32 bits
> > > +	 * only, those registers are RES0.
> > > +	 * Those MSB registers were introduced in IP v7.1, which we check first.
> > > +	 */
> > > +	if ((axienet_ior(lp, XAE_ID_OFFSET) >> 24) >= 0x9) {
> > > +		void __iomem *desc = lp->dma_regs +
> > > XAXIDMA_TX_CDESC_OFFSET + 4;
> > > +
> > > +		iowrite32(0x0, desc);
> > > +		if (ioread32(desc) == 0) {	/* sanity check */
> > > +			iowrite32(0xffffffff, desc);
> > > +			if (ioread32(desc) > 0) {
> > > +				lp->features |= XAE_FEATURE_DMA_64BIT;
> > > +				dev_info(&pdev->dev,
> > > +					 "autodetected 64-bit DMA range\n");
> > > +			}
> > > +			iowrite32(0x0, desc);
> > > +		}
> > > +	}
> > > +
> > >  	/* Check for Ethernet core IRQ (optional) */
> > >  	if (lp->eth_irq <= 0)
> > >  		dev_info(&pdev->dev, "Ethernet core IRQ not defined\n");
> > > --
> > > 2.17.1
> >


  reply index

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-10 11:54 [PATCH 00/14] net: axienet: Error handling, SGMII and 64-bit DMA fixes Andre Przywara
2020-01-10 11:54 ` [PATCH 01/14] net: xilinx: temac: Relax Kconfig dependencies Andre Przywara
2020-01-10 14:19   ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 02/14] net: axienet: Propagate failure of DMA descriptor setup Andre Przywara
2020-01-10 14:54   ` Radhey Shyam Pandey
2020-01-10 17:53     ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 03/14] net: axienet: Fix DMA descriptor cleanup path Andre Przywara
2020-01-10 15:14   ` Radhey Shyam Pandey
2020-01-10 15:43     ` Andre Przywara
2020-01-10 17:05       ` Radhey Shyam Pandey
2020-01-16 18:03         ` Andre Przywara
2020-01-20 18:32           ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 04/14] net: axienet: Improve DMA error handling Andre Przywara
2020-01-10 15:26   ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 05/14] net: axienet: Factor out TX descriptor chain cleanup Andre Przywara
2020-01-10 18:04   ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 06/14] net: axienet: Check for DMA mapping errors Andre Przywara
2020-01-13  5:54   ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 07/14] net: axienet: Fix SGMII support Andre Przywara
2020-01-10 14:04   ` Andrew Lunn
2020-01-10 14:20     ` Andre Przywara
2020-01-10 14:26       ` Andrew Lunn
2020-01-10 15:04       ` Russell King - ARM Linux admin
2020-01-10 15:22         ` Russell King - ARM Linux admin
2020-01-10 17:04           ` Russell King - ARM Linux admin
2020-01-18 11:22             ` Russell King - ARM Linux admin
2020-01-20 14:50               ` Andre Przywara
2020-01-20 15:45                 ` Russell King - ARM Linux admin
2020-01-27 17:04                   ` Andre Przywara
2020-01-27 17:20                     ` Radhey Shyam Pandey
2020-01-27 18:53                     ` Russell King - ARM Linux admin
2020-04-22  1:45                       ` Xilinx axienet 1000BaseX support (was: Re: [PATCH 07/14] net: axienet: Fix SGMII support) Robert Hancock
2020-04-22  7:51                         ` Russell King - ARM Linux admin
2020-04-22 16:31                           ` Xilinx axienet 1000BaseX support Robert Hancock
2020-04-28 21:59                           ` Robert Hancock
2020-04-28 23:01                             ` Russell King - ARM Linux admin
2020-04-28 23:51                               ` Robert Hancock
2020-04-29  8:21                                 ` Russell King - ARM Linux admin
2020-01-10 14:58   ` [PATCH 07/14] net: axienet: Fix SGMII support Russell King - ARM Linux admin
2020-01-10 17:32     ` Andre Przywara
2020-01-10 18:05       ` Russell King - ARM Linux admin
2020-01-10 19:33         ` Andrew Lunn
2020-01-10 11:54 ` [PATCH 08/14] net: axienet: Drop MDIO interrupt registers from ethtools dump Andre Przywara
2020-01-13  6:02   ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 09/14] net: axienet: Add mii-tool support Andre Przywara
2020-01-13  6:12   ` Radhey Shyam Pandey
2020-03-12 11:41     ` Andre Przywara
2020-01-10 11:54 ` [PATCH 10/14] net: axienet: Wrap DMA pointer writes to prepare for 64 bit Andre Przywara
2020-01-10 11:54 ` [PATCH 11/14] net: axienet: Upgrade descriptors to hold 64-bit addresses Andre Przywara
2020-01-14 16:35   ` Radhey Shyam Pandey
2020-01-14 17:29     ` Andre Przywara
2020-01-10 11:54 ` [PATCH 12/14] net: axienet: Autodetect 64-bit DMA capability Andre Przywara
2020-01-10 14:08   ` Andrew Lunn
2020-01-10 14:13     ` Andre Przywara
2020-01-10 14:22       ` Andrew Lunn
2020-01-10 15:08         ` Andre Przywara
2020-01-10 15:22           ` Andrew Lunn
2020-01-14 17:03   ` Radhey Shyam Pandey
2020-01-14 17:41     ` Andre Przywara
2020-01-15  6:02       ` Radhey Shyam Pandey [this message]
2020-01-10 11:54 ` [PATCH 13/14] net: axienet: Allow DMA to beyond 4GB Andre Przywara
2020-01-10 11:54 ` [PATCH 14/14] net: axienet: Update devicetree binding documentation Andre Przywara
2020-01-21 21:51   ` Rob Herring
2020-01-24 16:29     ` Andre Przywara
2020-01-27  9:28       ` Radhey Shyam Pandey

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MN2PR02MB7007DF6B24EABA513274B489C7370@MN2PR02MB7007.namprd02.prod.outlook.com \
    --to=radheys@xilinx.com \
    --cc=andre.przywara@arm.com \
    --cc=davem@davemloft.net \
    --cc=hancock@sedsystems.ca \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michals@xilinx.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Netdev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netdev/0 netdev/git/0.git
	git clone --mirror https://lore.kernel.org/netdev/1 netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ https://lore.kernel.org/netdev \
		netdev@vger.kernel.org
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netdev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git