netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 net-next 3/5] net: fec: Remove PHY reset in fec_main.c
@ 2021-01-18 16:59 Badel, Laurent
  0 siblings, 0 replies; only message in thread
From: Badel, Laurent @ 2021-01-18 16:59 UTC (permalink / raw)
  To: davem, m.felsch, fugang.duan, kuba, andrew, linux, p.zabel,
	lgirdwood, broonie, robh+dt, richard.leitner, netdev, devicetree,
	f.fainelli, marex

PHY reset from the FEC driver is not needed if the PHY is kept in reset
after PHY driver probe, so remove phy_reset_after_clk_enable() and related
code from fec_main.c.

Signed-off-by: Laurent Badel <laurentbadel@eaton.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 40 -----------------------
 1 file changed, 40 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 04f24c66cf36..c9401c758364 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1911,27 +1911,6 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 	return ret;
 }
 
-static void fec_enet_phy_reset_after_clk_enable(struct net_device *ndev)
-{
-	struct fec_enet_private *fep = netdev_priv(ndev);
-	struct phy_device *phy_dev = ndev->phydev;
-
-	if (phy_dev) {
-		phy_reset_after_clk_enable(phy_dev);
-	} else if (fep->phy_node) {
-		/*
-		 * If the PHY still is not bound to the MAC, but there is
-		 * OF PHY node and a matching PHY device instance already,
-		 * use the OF PHY node to obtain the PHY device instance,
-		 * and then use that PHY device instance when triggering
-		 * the PHY reset.
-		 */
-		phy_dev = of_phy_find_device(fep->phy_node);
-		phy_reset_after_clk_enable(phy_dev);
-		put_device(&phy_dev->mdio.dev);
-	}
-}
-
 static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
@@ -1958,7 +1937,6 @@ static int fec_enet_clk_enable(struct net_device *ndev, bool enable)
 		if (ret)
 			goto failed_clk_ref;
 
-		fec_enet_phy_reset_after_clk_enable(ndev);
 	} else {
 		clk_disable_unprepare(fep->clk_enet_out);
 		if (fep->clk_ptp) {
@@ -2972,7 +2950,6 @@ fec_enet_open(struct net_device *ndev)
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
 	int ret;
-	bool reset_again;
 
 	ret = pm_runtime_resume_and_get(&fep->pdev->dev);
 	if (ret < 0)
@@ -2983,17 +2960,6 @@ fec_enet_open(struct net_device *ndev)
 	if (ret)
 		goto clk_enable;
 
-	/* During the first fec_enet_open call the PHY isn't probed at this
-	 * point. Therefore the phy_reset_after_clk_enable() call within
-	 * fec_enet_clk_enable() fails. As we need this reset in order to be
-	 * sure the PHY is working correctly we check if we need to reset again
-	 * later when the PHY is probed
-	 */
-	if (ndev->phydev && ndev->phydev->drv)
-		reset_again = false;
-	else
-		reset_again = true;
-
 	/* I should reset the ring buffers here, but I don't yet know
 	 * a simple way to do that.
 	 */
@@ -3005,12 +2971,6 @@ fec_enet_open(struct net_device *ndev)
 	/* Init MAC prior to mii bus probe */
 	fec_restart(ndev);
 
-	/* Call phy_reset_after_clk_enable() again if it failed during
-	 * phy_reset_after_clk_enable() before because the PHY wasn't probed.
-	 */
-	if (reset_again)
-		fec_enet_phy_reset_after_clk_enable(ndev);
-
 	/* Probe and connect to PHY when open the interface */
 	ret = fec_enet_mii_probe(ndev);
 	if (ret)
-- 
2.17.1



-----------------------------
Eaton Industries Manufacturing GmbH ~ Registered place of business: Route de la Longeraie 7, 1110, Morges, Switzerland 

-----------------------------


^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2021-01-18 17:01 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-18 16:59 [PATCH v4 net-next 3/5] net: fec: Remove PHY reset in fec_main.c Badel, Laurent

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).