netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Golle <daniel@makrotopia.org>
To: arinc9.unal@gmail.com
Cc: "Sean Wang" <sean.wang@mediatek.com>,
	"Landen Chao" <Landen.Chao@mediatek.com>,
	"DENG Qingfang" <dqfext@gmail.com>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Vladimir Oltean" <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Matthias Brugger" <matthias.bgg@gmail.com>,
	"AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>,
	"Russell King" <linux@armlinux.org.uk>,
	"Arınç ÜNAL" <arinc.unal@arinc9.com>,
	"Richard van Schagen" <richard@routerhints.com>,
	"Richard van Schagen" <vschagen@cs.com>,
	"Frank Wunderlich" <frank-w@public-files.de>,
	erkin.bozoglu@xeront.com, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: Re: [RFC PATCH net-next 21/22] net: dsa: mt7530: get rid of useless error returns on phylink code path
Date: Fri, 21 Apr 2023 19:58:48 +0100	[thread overview]
Message-ID: <ZELc6MjOicjsPGGb@makrotopia.org> (raw)
In-Reply-To: <20230421143648.87889-22-arinc.unal@arinc9.com>

On Fri, Apr 21, 2023 at 05:36:47PM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> Remove error returns on the cases where they are already handled with the
> function the mac_port_get_caps member points to.
> 
> mt7531_mac_config() is also called from mt7531_cpu_port_config() outside of
> phylink but the port and interface modes are already handled there.
> 
> Change the functions and the mac_port_config function pointer to void now
> that there're no error returns anymore.
> 
> Remove mt753x_is_mac_port() that used to help the said error returns.
> 
> On mt7531_mac_config(), switch to if statements to simplify the code.
> 
> Remove internal phy cases from mt753x_phylink_mac_config() as there is no
> configuration to be done for them. There's also no need to check the
> interface mode as that's already handled with the function the
> mac_port_get_caps member points to.
> 
> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
(on BPi-R3 MT7986A+MT7531AE, BPi-R64 MT7622+MT7531BE and MT7988A rfb)

> ---
>  drivers/net/dsa/mt7530.c | 81 ++++++++--------------------------------
>  drivers/net/dsa/mt7530.h |  2 +-
>  2 files changed, 17 insertions(+), 66 deletions(-)
> 
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 8ece3d0d820c..3d19e06061cb 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -2556,7 +2556,7 @@ static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
>  	}
>  }
>  
> -static int
> +static void
>  mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
>  		  phy_interface_t interface)
>  {
> @@ -2567,22 +2567,14 @@ mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
>  	} else if (port == 6) {
>  		mt7530_setup_port6(priv->ds, interface);
>  	}
> -
> -	return 0;
>  }
>  
> -static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
> -			      phy_interface_t interface,
> -			      struct phy_device *phydev)
> +static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
> +			       phy_interface_t interface,
> +			       struct phy_device *phydev)
>  {
>  	u32 val;
>  
> -	if (priv->p5_sgmii) {
> -		dev_err(priv->dev, "RGMII mode is not available for port %d\n",
> -			port);
> -		return -EINVAL;
> -	}
> -
>  	val = mt7530_read(priv, MT7531_CLKGEN_CTRL);
>  	val |= GP_CLK_EN;
>  	val &= ~GP_MODE_MASK;
> @@ -2610,20 +2602,14 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
>  		case PHY_INTERFACE_MODE_RGMII_ID:
>  			break;
>  		default:
> -			return -EINVAL;
> +			break;
>  		}
>  	}
> -	mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
>  
> -	return 0;
> -}
> -
> -static bool mt753x_is_mac_port(u32 port)
> -{
> -	return (port == 5 || port == 6);
> +	mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
>  }
>  
> -static int
> +static void
>  mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
>  		  phy_interface_t interface)
>  {
> @@ -2631,42 +2617,21 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
>  	struct phy_device *phydev;
>  	struct dsa_port *dp;
>  
> -	if (!mt753x_is_mac_port(port)) {
> -		dev_err(priv->dev, "port %d is not a MAC port\n", port);
> -		return -EINVAL;
> -	}
> -
> -	switch (interface) {
> -	case PHY_INTERFACE_MODE_RGMII:
> -	case PHY_INTERFACE_MODE_RGMII_ID:
> -	case PHY_INTERFACE_MODE_RGMII_RXID:
> -	case PHY_INTERFACE_MODE_RGMII_TXID:
> +	if (phy_interface_mode_is_rgmii(interface)) {
>  		dp = dsa_to_port(ds, port);
>  		phydev = dp->slave->phydev;
> -		return mt7531_rgmii_setup(priv, port, interface, phydev);
> -	case PHY_INTERFACE_MODE_SGMII:
> -	case PHY_INTERFACE_MODE_NA:
> -	case PHY_INTERFACE_MODE_1000BASEX:
> -	case PHY_INTERFACE_MODE_2500BASEX:
> -		/* handled in SGMII PCS driver */
> -		return 0;
> -	default:
> -		return -EINVAL;
> +		mt7531_rgmii_setup(priv, port, interface, phydev);
>  	}
> -
> -	return -EINVAL;
>  }
>  
> -static int
> +static void
>  mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
>  		  const struct phylink_link_state *state)
>  {
>  	struct mt7530_priv *priv = ds->priv;
>  
> -	if (!priv->info->mac_port_config)
> -		return 0;
> -
> -	return priv->info->mac_port_config(ds, port, mode, state->interface);
> +	if (priv->info->mac_port_config)
> +		priv->info->mac_port_config(ds, port, mode, state->interface);
>  }
>  
>  static struct phylink_pcs *
> @@ -2695,30 +2660,18 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
>  	u32 mcr_cur, mcr_new;
>  
>  	switch (port) {
> -	case 0 ... 4: /* Internal phy */
> -		if (state->interface != PHY_INTERFACE_MODE_GMII &&
> -		    state->interface != PHY_INTERFACE_MODE_INTERNAL)
> -			goto unsupported;
> -		break;
>  	case 5: /* Port 5, can be used as a CPU port. */
>  		if (priv->p5_configured)
>  			break;
>  
> -		if (mt753x_mac_config(ds, port, mode, state) < 0)
> -			goto unsupported;
> +		mt753x_mac_config(ds, port, mode, state);
>  		break;
>  	case 6: /* Port 6, can be used as a CPU port. */
>  		if (priv->p6_configured)
>  			break;
>  
> -		if (mt753x_mac_config(ds, port, mode, state) < 0)
> -			goto unsupported;
> +		mt753x_mac_config(ds, port, mode, state);
>  		break;
> -	default:
> -unsupported:
> -		dev_err(ds->dev, "%s: unsupported %s port: %i\n",
> -			__func__, phy_modes(state->interface), port);
> -		return;
>  	}
>  
>  	mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
> @@ -2811,7 +2764,6 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
>  	struct mt7530_priv *priv = ds->priv;
>  	phy_interface_t interface;
>  	int speed;
> -	int ret;
>  
>  	switch (port) {
>  	case 5:
> @@ -2836,9 +2788,8 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
>  	else
>  		speed = SPEED_1000;
>  
> -	ret = mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
> -	if (ret)
> -		return ret;
> +	mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
> +
>  	mt7530_write(priv, MT7530_PMCR_P(port),
>  		     PMCR_CPU_PORT_SETTING(priv->id));
>  	mt753x_phylink_pcs_link_up(&priv->pcs[port].pcs, MLO_AN_FIXED,
> diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
> index cad9115de22b..ee2b3d2d6258 100644
> --- a/drivers/net/dsa/mt7530.h
> +++ b/drivers/net/dsa/mt7530.h
> @@ -722,7 +722,7 @@ struct mt753x_info {
>  	void (*mac_port_validate)(struct dsa_switch *ds, int port,
>  				  phy_interface_t interface,
>  				  unsigned long *supported);
> -	int (*mac_port_config)(struct dsa_switch *ds, int port,
> +	void (*mac_port_config)(struct dsa_switch *ds, int port,
>  			       unsigned int mode,
>  			       phy_interface_t interface);
>  };
> -- 
> 2.37.2
> 

  reply	other threads:[~2023-04-21 18:59 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-21 14:36 [RFC PATCH net-next 00/22] net: dsa: MT7530, MT7531, and MT7988 improvements arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 01/22] net: dsa: mt7530: add missing @p5_interface to mt7530_priv description arinc9.unal
2023-04-21 16:21   ` Daniel Golle
2023-04-21 14:36 ` [RFC PATCH net-next 02/22] net: dsa: mt7530: use p5_interface_select as data type for p5_intf_sel arinc9.unal
2023-04-21 16:23   ` Daniel Golle
2023-04-21 18:27     ` Arınç ÜNAL
2023-04-21 14:36 ` [RFC PATCH net-next 03/22] net: dsa: mt7530: properly support MT7531AE and MT7531BE arinc9.unal
2023-04-21 15:22   ` Daniel Golle
2023-04-21 18:29     ` Arınç ÜNAL
2023-04-21 14:36 ` [RFC PATCH net-next 04/22] net: dsa: mt7530: improve comments regarding port 5 and 6 arinc9.unal
2023-04-21 16:24   ` Daniel Golle
2023-04-21 14:36 ` [RFC PATCH net-next 05/22] net: dsa: mt7530: read XTAL value from correct register arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 06/22] net: dsa: mt7530: improve code path for setting up port 5 arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 07/22] net: dsa: mt7530: do not run mt7530_setup_port5() if port 5 is disabled arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 08/22] net: dsa: mt7530: change p{5,6}_interface to p{5,6}_configured arinc9.unal
2023-04-21 17:28   ` Daniel Golle
2023-04-21 18:17     ` Arınç ÜNAL
2023-04-21 18:20       ` Arınç ÜNAL
2023-04-21 18:25         ` Arınç ÜNAL
2023-04-21 19:03           ` Daniel Golle
2023-04-21 14:36 ` [RFC PATCH net-next 09/22] net: dsa: mt7530: empty default case on mt7530_setup_port5() arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 10/22] net: dsa: mt7530: call port 6 setup from mt7530_mac_config() arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 11/22] net: dsa: mt7530: remove pad_setup function pointer arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 12/22] net: dsa: mt7530: move XTAL check to mt7530_setup() arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 13/22] net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6() arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 14/22] net: dsa: mt7530: switch to if/else statements on mt7530_setup_port6() arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 15/22] net: dsa: mt7530: set TRGMII RD TAP if trgmii is being used arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 16/22] net: dsa: mt7530: move lowering port 5 RGMII driving to mt7530_setup() arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 17/22] net: dsa: mt7530: fix port capabilities for MT7988 arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 18/22] net: dsa: mt7530: remove .mac_port_config for MT7988 and make it optional arinc9.unal
2023-04-21 14:36 ` [RFC PATCH net-next 19/22] net: dsa: mt7530: set interrupt register only for MT7530 arinc9.unal
2023-04-21 18:32   ` Daniel Golle
2023-04-21 14:36 ` [RFC PATCH net-next 20/22] net: dsa: mt7530: force link-down on MACs before reset on MT7530 arinc9.unal
2023-04-21 18:42   ` Daniel Golle
2023-04-21 18:47     ` Arınç ÜNAL
2023-04-21 19:06       ` Daniel Golle
2023-04-29 15:37     ` Arınç ÜNAL
2023-04-21 14:36 ` [RFC PATCH net-next 21/22] net: dsa: mt7530: get rid of useless error returns on phylink code path arinc9.unal
2023-04-21 18:58   ` Daniel Golle [this message]
2023-04-21 14:36 ` [RFC PATCH net-next 22/22] net: dsa: mt7530: rename p5_intf_sel and use only for MT7530 switch arinc9.unal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZELc6MjOicjsPGGb@makrotopia.org \
    --to=daniel@makrotopia.org \
    --cc=Landen.Chao@mediatek.com \
    --cc=andrew@lunn.ch \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=arinc.unal@arinc9.com \
    --cc=arinc9.unal@gmail.com \
    --cc=davem@davemloft.net \
    --cc=dqfext@gmail.com \
    --cc=edumazet@google.com \
    --cc=erkin.bozoglu@xeront.com \
    --cc=f.fainelli@gmail.com \
    --cc=frank-w@public-files.de \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=richard@routerhints.com \
    --cc=sean.wang@mediatek.com \
    --cc=vschagen@cs.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).