netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, wcn36xx@lists.infradead.org,
	linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH 2/5] wcn36xx: Allow firmware name to be overridden by DT
Date: Mon, 15 Mar 2021 11:58:29 +0000	[thread overview]
Message-ID: <a462bb9f-657d-6543-1f93-95c7f360a2e6@linaro.org> (raw)
In-Reply-To: <20210312003318.3273536-3-bjorn.andersson@linaro.org>

On 12/03/2021 00:33, Bjorn Andersson wrote:
> The WLAN NV firmware blob differs between platforms, and possibly
> devices, so add support in the wcn36xx driver for reading the path of
> this file from DT in order to allow these files to live in a generic
> file system (or linux-firmware).
> 
> For some reason the parent (wcnss_ctrl) also needs to upload this blob,
> so rather than specifying the same information in both nodes wcn36xx
> reads the string from the parent's of_node.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> This patch can be applied independently of the others, but relates to the
> acceptance of the addition to the DT binding (in patch 1/5). So my suggestion
> is that this one goes through the ath tree and the others through the Qualcomm
> SoC tree.
> 
>   drivers/net/wireless/ath/wcn36xx/main.c    | 7 +++++++
>   drivers/net/wireless/ath/wcn36xx/smd.c     | 4 ++--
>   drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
>   3 files changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
> index afb4877eaad8..87b5c0ff16c0 100644
> --- a/drivers/net/wireless/ath/wcn36xx/main.c
> +++ b/drivers/net/wireless/ath/wcn36xx/main.c
> @@ -1407,6 +1407,13 @@ static int wcn36xx_probe(struct platform_device *pdev)
>   		goto out_wq;
>   	}
>   
> +	wcn->nv_file = WLAN_NV_FILE;
> +	ret = of_property_read_string(wcn->dev->parent->of_node, "firmware-name", &wcn->nv_file);
> +	if (ret < 0 && ret != -EINVAL) {
> +		wcn36xx_err("failed to read \"firmware-name\" property\n");
> +		goto out_wq;
> +	}
> +
>   	wcn->smd_channel = qcom_wcnss_open_channel(wcnss, "WLAN_CTRL", wcn36xx_smd_rsp_process, hw);
>   	if (IS_ERR(wcn->smd_channel)) {
>   		wcn36xx_err("failed to open WLAN_CTRL channel\n");
> diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
> index d0c3a1557e8d..7b928f988068 100644
> --- a/drivers/net/wireless/ath/wcn36xx/smd.c
> +++ b/drivers/net/wireless/ath/wcn36xx/smd.c
> @@ -514,10 +514,10 @@ int wcn36xx_smd_load_nv(struct wcn36xx *wcn)
>   	u16 fm_offset = 0;
>   
>   	if (!wcn->nv) {
> -		ret = request_firmware(&wcn->nv, WLAN_NV_FILE, wcn->dev);
> +		ret = request_firmware(&wcn->nv, wcn->nv_file, wcn->dev);
>   		if (ret) {
>   			wcn36xx_err("Failed to load nv file %s: %d\n",
> -				      WLAN_NV_FILE, ret);
> +				    wcn->nv_file, ret);
>   			goto out;
>   		}
>   	}
> diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> index 71fa9992b118..5977af2116e3 100644
> --- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> +++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
> @@ -185,6 +185,7 @@ struct wcn36xx {
>   	struct device		*dev;
>   	struct list_head	vif_list;
>   
> +	const char		*nv_file;
>   	const struct firmware	*nv;
>   
>   	u8			fw_revision;
> 

Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

  reply	other threads:[~2021-03-15 11:57 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-12  0:33 [PATCH 0/5] qcom: wcnss: Allow overriding firmware form DT Bjorn Andersson
2021-03-12  0:33 ` [PATCH 1/5] dt-bindings: soc: qcom: wcnss: Add firmware-name property Bjorn Andersson
2021-03-24 15:21   ` Rob Herring
2021-03-12  0:33 ` [PATCH 2/5] wcn36xx: Allow firmware name to be overridden by DT Bjorn Andersson
2021-03-15 11:58   ` Bryan O'Donoghue [this message]
2021-03-12  0:33 ` [PATCH 3/5] soc: qcom: wcnss_ctrl: Introduce local variable "dev" Bjorn Andersson
2021-03-12  0:33 ` [PATCH 4/5] soc: qcom: wcnss_ctrl: Allow reading firmware-name from DT Bjorn Andersson
2021-03-15 11:57   ` Bryan O'Donoghue
2021-03-12  0:33 ` [PATCH 5/5] arm64: dts: qcom: msm8916: Enable modem and WiFi Bjorn Andersson
2021-03-15 11:57   ` Bryan O'Donoghue
2021-03-15 12:01   ` Bryan O'Donoghue
2021-03-18 14:50     ` Bjorn Andersson
2021-03-19 14:41       ` Bryan O'Donoghue
2021-03-19 15:19   ` Stephan Gerhold
2021-05-31 16:33     ` Bjorn Andersson
2021-03-18 16:48 ` [PATCH 0/5] qcom: wcnss: Allow overriding firmware form DT Vinod Koul
2021-03-18 16:56 ` Jeffrey Hugo
2021-03-18 17:06   ` Bjorn Andersson
2021-03-18 18:12     ` Jeffrey Hugo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a462bb9f-657d-6543-1f93-95c7f360a2e6@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wcn36xx@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).