From: Jose Abreu <Jose.Abreu@synopsys.com>
To: netdev@vger.kernel.org
Cc: Joao Pinto <Joao.Pinto@synopsys.com>,
Jose Abreu <Jose.Abreu@synopsys.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
"David S. Miller" <davem@davemloft.net>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next 2/6] net: stmmac: Add VLAN HASH filtering support in GMAC4+
Date: Tue, 10 Sep 2019 16:41:23 +0200 [thread overview]
Message-ID: <b340435fe92674fd3ef33f3a7c43933cb451838a.1568126224.git.joabreu@synopsys.com> (raw)
In-Reply-To: <cover.1568126224.git.joabreu@synopsys.com>
In-Reply-To: <cover.1568126224.git.joabreu@synopsys.com>
Adds the support for VLAN HASH Filtering in GMAC4/5 cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 11 ++++++++
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 31 +++++++++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 +-
3 files changed, 43 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index 03301ffc0391..4dfa69850040 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -16,6 +16,8 @@
#define GMAC_CONFIG 0x00000000
#define GMAC_PACKET_FILTER 0x00000008
#define GMAC_HASH_TAB(x) (0x10 + (x) * 4)
+#define GMAC_VLAN_TAG 0x00000050
+#define GMAC_VLAN_HASH_TABLE 0x00000058
#define GMAC_RX_FLOW_CTRL 0x00000090
#define GMAC_QX_TX_FLOW_CTRL(x) (0x70 + x * 4)
#define GMAC_TXQ_PRTY_MAP0 0x98
@@ -62,9 +64,18 @@
#define GMAC_PACKET_FILTER_PM BIT(4)
#define GMAC_PACKET_FILTER_PCF BIT(7)
#define GMAC_PACKET_FILTER_HPF BIT(10)
+#define GMAC_PACKET_FILTER_VTFE BIT(16)
#define GMAC_MAX_PERFECT_ADDRESSES 128
+/* MAC VLAN */
+#define GMAC_VLAN_EDVLP BIT(26)
+#define GMAC_VLAN_VTHM BIT(25)
+#define GMAC_VLAN_DOVLTC BIT(20)
+#define GMAC_VLAN_ESVL BIT(18)
+#define GMAC_VLAN_ETV BIT(16)
+#define GMAC_VLAN_VID GENMASK(15, 0)
+
/* MAC RX Queue Enable */
#define GMAC_RX_QUEUE_CLEAR(queue) ~(GENMASK(1, 0) << ((queue) * 2))
#define GMAC_RX_AV_QUEUE_ENABLE(queue) BIT((queue) * 2)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 596311a80d1c..5b43a8df1536 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -731,6 +731,34 @@ static void dwmac4_set_mac_loopback(void __iomem *ioaddr, bool enable)
writel(value, ioaddr + GMAC_CONFIG);
}
+static void dwmac4_update_vlan_hash(struct mac_device_info *hw, u32 hash,
+ bool is_double)
+{
+ void __iomem *ioaddr = hw->pcsr;
+
+ writel(hash, ioaddr + GMAC_VLAN_HASH_TABLE);
+
+ if (hash) {
+ u32 value = GMAC_VLAN_VTHM | GMAC_VLAN_ETV;
+ if (is_double) {
+ value |= GMAC_VLAN_EDVLP;
+ value |= GMAC_VLAN_ESVL;
+ value |= GMAC_VLAN_DOVLTC;
+ }
+
+ writel(value, ioaddr + GMAC_VLAN_TAG);
+ } else {
+ u32 value = readl(ioaddr + GMAC_VLAN_TAG);
+
+ value &= ~(GMAC_VLAN_VTHM | GMAC_VLAN_ETV);
+ value &= ~(GMAC_VLAN_EDVLP | GMAC_VLAN_ESVL);
+ value &= ~GMAC_VLAN_DOVLTC;
+ value &= ~GMAC_VLAN_VID;
+
+ writel(value, ioaddr + GMAC_VLAN_TAG);
+ }
+}
+
const struct stmmac_ops dwmac4_ops = {
.core_init = dwmac4_core_init,
.set_mac = stmmac_set_mac,
@@ -761,6 +789,7 @@ const struct stmmac_ops dwmac4_ops = {
.debug = dwmac4_debug,
.set_filter = dwmac4_set_filter,
.set_mac_loopback = dwmac4_set_mac_loopback,
+ .update_vlan_hash = dwmac4_update_vlan_hash,
};
const struct stmmac_ops dwmac410_ops = {
@@ -793,6 +822,7 @@ const struct stmmac_ops dwmac410_ops = {
.debug = dwmac4_debug,
.set_filter = dwmac4_set_filter,
.set_mac_loopback = dwmac4_set_mac_loopback,
+ .update_vlan_hash = dwmac4_update_vlan_hash,
};
const struct stmmac_ops dwmac510_ops = {
@@ -830,6 +860,7 @@ const struct stmmac_ops dwmac510_ops = {
.rxp_config = dwmac5_rxp_config,
.flex_pps_config = dwmac5_flex_pps_config,
.set_mac_loopback = dwmac4_set_mac_loopback,
+ .update_vlan_hash = dwmac4_update_vlan_hash,
};
int dwmac4_setup(struct stmmac_priv *priv)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 3ed5508586ef..2456f421aac9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -333,7 +333,7 @@ static void dwmac4_get_hw_feature(void __iomem *ioaddr,
dma_cap->mbps_10_100 = (hw_cap & GMAC_HW_FEAT_MIISEL);
dma_cap->mbps_1000 = (hw_cap & GMAC_HW_FEAT_GMIISEL) >> 1;
dma_cap->half_duplex = (hw_cap & GMAC_HW_FEAT_HDSEL) >> 2;
- dma_cap->hash_filter = (hw_cap & GMAC_HW_FEAT_VLHASH) >> 4;
+ dma_cap->vlhash = (hw_cap & GMAC_HW_FEAT_VLHASH) >> 4;
dma_cap->multi_addr = (hw_cap & GMAC_HW_FEAT_ADDMAC) >> 18;
dma_cap->pcs = (hw_cap & GMAC_HW_FEAT_PCSSEL) >> 3;
dma_cap->sma_mdio = (hw_cap & GMAC_HW_FEAT_SMASEL) >> 5;
--
2.7.4
next prev parent reply other threads:[~2019-09-10 14:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-10 14:41 [PATCH net-next 0/6] net: stmmac: Improvements for -next Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 1/6] net: stmmac: Prevent divide-by-zero Jose Abreu
2019-09-10 14:41 ` Jose Abreu [this message]
2019-09-10 14:41 ` [PATCH net-next 3/6] net: stmmac: xgmac: Reinitialize correctly a variable Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 4/6] net: stmmac: Add support for SA Insertion/Replacement in GMAC4+ Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 5/6] net: stmmac: Add support for VLAN Insertion Offload " Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 6/6] net: stmmac: ARP Offload for GMAC4+ Cores Jose Abreu
2019-09-10 16:50 ` [PATCH net-next 0/6] net: stmmac: Improvements for -next Jose Abreu
2019-09-10 20:36 ` Jesse Brandeburg
2019-09-11 8:21 ` David Miller
2019-09-11 8:59 ` Jose Abreu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b340435fe92674fd3ef33f3a7c43933cb451838a.1568126224.git.joabreu@synopsys.com \
--to=jose.abreu@synopsys.com \
--cc=Joao.Pinto@synopsys.com \
--cc=alexandre.torgue@st.com \
--cc=davem@davemloft.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).