Netdev Archive on lore.kernel.org
 help / color / Atom feed
From: Ben Greear <greearb@candelatech.com>
To: Rakesh Pillai <pillair@codeaurora.org>, ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	kvalo@codeaurora.org, davem@davemloft.net, kuba@kernel.org,
	netdev@vger.kernel.org
Subject: Re: [PATCH v2 1/3] ath10k: Add history for tracking certain events
Date: Fri, 31 Jul 2020 11:38:15 -0700
Message-ID: <bedc5fe0-1904-d045-4a84-0869ee1b0b2e@candelatech.com> (raw)
In-Reply-To: <1596220042-2778-2-git-send-email-pillair@codeaurora.org>

On 7/31/20 11:27 AM, Rakesh Pillai wrote:
> Add history for tracking the below events
> - register read
> - register write
> - IRQ trigger
> - NAPI poll
> - CE service
> - WMI cmd
> - WMI event
> - WMI tx completion
> 
> This will help in debugging any crash or any
> improper behaviour.
> 
> Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
>   drivers/net/wireless/ath/ath10k/ce.c      |   1 +
>   drivers/net/wireless/ath/ath10k/core.h    |  74 +++++++++++++++++
>   drivers/net/wireless/ath/ath10k/debug.c   | 133 ++++++++++++++++++++++++++++++
>   drivers/net/wireless/ath/ath10k/debug.h   |  74 +++++++++++++++++
>   drivers/net/wireless/ath/ath10k/snoc.c    |  15 +++-
>   drivers/net/wireless/ath/ath10k/wmi-tlv.c |   1 +
>   drivers/net/wireless/ath/ath10k/wmi.c     |  10 +++
>   7 files changed, 307 insertions(+), 1 deletion(-)
> 

> +void ath10k_record_wmi_event(struct ath10k *ar, enum ath10k_wmi_type type,
> +			     u32 id, unsigned char *data)
> +{
> +	struct ath10k_wmi_event_entry *entry;
> +	u32 idx;
> +
> +	if (type == ATH10K_WMI_EVENT) {
> +		if (!ar->wmi_event_history.record)
> +			return;

This check above is duplicated below, add it once at top of the method
instead.

> +
> +		spin_lock_bh(&ar->wmi_event_history.hist_lock);
> +		idx = ath10k_core_get_next_idx(&ar->reg_access_history.index,
> +					       ar->wmi_event_history.max_entries);
> +		spin_unlock_bh(&ar->wmi_event_history.hist_lock);
> +		entry = &ar->wmi_event_history.record[idx];
> +	} else {
> +		if (!ar->wmi_cmd_history.record)
> +			return;
> +
> +		spin_lock_bh(&ar->wmi_cmd_history.hist_lock);
> +		idx = ath10k_core_get_next_idx(&ar->reg_access_history.index,
> +					       ar->wmi_cmd_history.max_entries);
> +		spin_unlock_bh(&ar->wmi_cmd_history.hist_lock);
> +		entry = &ar->wmi_cmd_history.record[idx];
> +	}
> +
> +	entry->timestamp = ath10k_core_get_timestamp();
> +	entry->cpu_id = smp_processor_id();
> +	entry->type = type;
> +	entry->id = id;
> +	memcpy(&entry->data, data + 4, ATH10K_WMI_DATA_LEN);
> +}
> +EXPORT_SYMBOL(ath10k_record_wmi_event);

> @@ -1660,6 +1668,11 @@ static int ath10k_snoc_probe(struct platform_device *pdev)
>   	ar->ce_priv = &ar_snoc->ce;
>   	msa_size = drv_data->msa_size;
>   
> +	ath10k_core_reg_access_history_init(ar, ATH10K_REG_ACCESS_HISTORY_MAX);
> +	ath10k_core_wmi_event_history_init(ar, ATH10K_WMI_EVENT_HISTORY_MAX);
> +	ath10k_core_wmi_cmd_history_init(ar, ATH10K_WMI_CMD_HISTORY_MAX);
> +	ath10k_core_ce_event_history_init(ar, ATH10K_CE_EVENT_HISTORY_MAX);

Maybe only enable this once user turns it on?  It sucks up a bit of memory?

> +
>   	ath10k_snoc_quirks_init(ar);
>   
>   	ret = ath10k_snoc_resource_init(ar);
> diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
> index 932266d..9df5748 100644
> --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
> +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
> @@ -627,6 +627,7 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
>   	if (skb_pull(skb, sizeof(struct wmi_cmd_hdr)) == NULL)
>   		goto out;
>   
> +	ath10k_record_wmi_event(ar, ATH10K_WMI_EVENT, id, skb->data);
>   	trace_ath10k_wmi_event(ar, id, skb->data, skb->len);
>   
>   	consumed = ath10k_tm_event_wmi(ar, id, skb);
> diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
> index a81a1ab..8ebd05c 100644
> --- a/drivers/net/wireless/ath/ath10k/wmi.c
> +++ b/drivers/net/wireless/ath/ath10k/wmi.c
> @@ -1802,6 +1802,15 @@ struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len)
>   
>   static void ath10k_wmi_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb)
>   {
> +	struct wmi_cmd_hdr *cmd_hdr;
> +	enum wmi_tlv_event_id id;
> +
> +	cmd_hdr = (struct wmi_cmd_hdr *)skb->data;
> +	id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
> +
> +	ath10k_record_wmi_event(ar, ATH10K_WMI_TX_COMPL, id,
> +				skb->data + sizeof(struct wmi_cmd_hdr));
> +
>   	dev_kfree_skb(skb);
>   }

I think guard the above new code with if (unlikely(ar->ce_event_history.record)) { ... }

All in all, I think I'd want to compile this out (while leaving other debug compiled
in) since it seems this stuff would be rarely used and it adds method calls to hot
paths.

That is a decision for Kalle though, so see what he says...

Thanks,
Ben


-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com

  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-31 18:27 [PATCH v2 0/3] Rakesh Pillai
2020-07-31 18:27 ` [PATCH v2 1/3] ath10k: Add history for tracking certain events Rakesh Pillai
2020-07-31 18:38   ` Ben Greear [this message]
2020-08-01  5:13     ` Rakesh Pillai
2020-07-31 18:27 ` [PATCH v2 2/3] ath10k: Add module param to enable history Rakesh Pillai
2020-07-31 18:27 ` [PATCH v2 3/3] ath10k: Add debugfs support to enable event history Rakesh Pillai
2020-07-31 18:46 ` [PATCH v2 0/3] Florian Fainelli
2020-08-01  5:10   ` Rakesh Pillai
2020-08-01  5:24     ` Florian Fainelli
2020-07-31 20:31 ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bedc5fe0-1904-d045-4a84-0869ee1b0b2e@candelatech.com \
    --to=greearb@candelatech.com \
    --cc=ath10k@lists.infradead.org \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pillair@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Netdev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netdev/0 netdev/git/0.git
	git clone --mirror https://lore.kernel.org/netdev/1 netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ https://lore.kernel.org/netdev \
		netdev@vger.kernel.org
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netdev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git