netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: netdev@vger.kernel.org
Cc: lorenzo.bianconi@redhat.com, davem@davemloft.net,
	thomas.petazzoni@bootlin.com, brouer@redhat.com,
	ilias.apalodimas@linaro.org, matteo.croce@redhat.com,
	mw@semihalf.com
Subject: [PATCH v2 net-next 2/8] net: mvneta: introduce page pool API for sw buffer manager
Date: Thu, 10 Oct 2019 01:18:32 +0200	[thread overview]
Message-ID: <bfef90c0ca5bf6fa172a63830533d9a783f5ceea.1570662004.git.lorenzo@kernel.org> (raw)
In-Reply-To: <cover.1570662004.git.lorenzo@kernel.org>

Use the page_pool api for allocations and DMA handling instead of
__dev_alloc_page()/dma_map_page() and free_page()/dma_unmap_page().
Pages are unmapped using page_pool_release_page before packets
go into the network stack.

The page_pool API offers buffer recycling capabilities for XDP but
allocates one page per packet, unless the driver splits and manages
the allocated page.
This is a preliminary patch to add XDP support to mvneta driver

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/net/ethernet/marvell/Kconfig  |  1 +
 drivers/net/ethernet/marvell/mvneta.c | 77 ++++++++++++++++++++-------
 2 files changed, 59 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index fb942167ee54..3d5caea096fb 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -61,6 +61,7 @@ config MVNETA
 	depends on ARCH_MVEBU || COMPILE_TEST
 	select MVMDIO
 	select PHYLINK
+	select PAGE_POOL
 	---help---
 	  This driver supports the network interface units in the
 	  Marvell ARMADA XP, ARMADA 370, ARMADA 38x and
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 128b9fded959..31cecc1ed848 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -37,6 +37,7 @@
 #include <net/ip.h>
 #include <net/ipv6.h>
 #include <net/tso.h>
+#include <net/page_pool.h>
 
 /* Registers */
 #define MVNETA_RXQ_CONFIG_REG(q)                (0x1400 + ((q) << 2))
@@ -603,6 +604,10 @@ struct mvneta_rx_queue {
 	u32 pkts_coal;
 	u32 time_coal;
 
+	/* page_pool */
+	struct page_pool *page_pool;
+	struct xdp_rxq_info xdp_rxq;
+
 	/* Virtual address of the RX buffer */
 	void  **buf_virt_addr;
 
@@ -1815,20 +1820,14 @@ static int mvneta_rx_refill(struct mvneta_port *pp,
 	dma_addr_t phys_addr;
 	struct page *page;
 
-	page = __dev_alloc_page(gfp_mask);
+	page = page_pool_alloc_pages(rxq->page_pool,
+				     gfp_mask | __GFP_NOWARN);
 	if (!page)
 		return -ENOMEM;
 
-	/* map page for use */
-	phys_addr = dma_map_page(pp->dev->dev.parent, page, 0, PAGE_SIZE,
-				 DMA_FROM_DEVICE);
-	if (unlikely(dma_mapping_error(pp->dev->dev.parent, phys_addr))) {
-		__free_page(page);
-		return -ENOMEM;
-	}
-
-	phys_addr += pp->rx_offset_correction;
+	phys_addr = page_pool_get_dma_addr(page) + pp->rx_offset_correction;
 	mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq);
+
 	return 0;
 }
 
@@ -1894,10 +1893,11 @@ static void mvneta_rxq_drop_pkts(struct mvneta_port *pp,
 		if (!data || !(rx_desc->buf_phys_addr))
 			continue;
 
-		dma_unmap_page(pp->dev->dev.parent, rx_desc->buf_phys_addr,
-			       PAGE_SIZE, DMA_FROM_DEVICE);
-		__free_page(data);
+		page_pool_put_page(rxq->page_pool, data, false);
 	}
+	if (xdp_rxq_info_is_reg(&rxq->xdp_rxq))
+		xdp_rxq_info_unreg(&rxq->xdp_rxq);
+	page_pool_destroy(rxq->page_pool);
 }
 
 static void
@@ -2029,8 +2029,7 @@ static int mvneta_rx_swbm(struct napi_struct *napi,
 				skb_add_rx_frag(rxq->skb, frag_num, page,
 						frag_offset, frag_size,
 						PAGE_SIZE);
-				dma_unmap_page(dev->dev.parent, phys_addr,
-					       PAGE_SIZE, DMA_FROM_DEVICE);
+				page_pool_release_page(rxq->page_pool, page);
 				rxq->left_size -= frag_size;
 			}
 		} else {
@@ -2060,9 +2059,7 @@ static int mvneta_rx_swbm(struct napi_struct *napi,
 						frag_offset, frag_size,
 						PAGE_SIZE);
 
-				dma_unmap_page(dev->dev.parent, phys_addr,
-					       PAGE_SIZE, DMA_FROM_DEVICE);
-
+				page_pool_release_page(rxq->page_pool, page);
 				rxq->left_size -= frag_size;
 			}
 		} /* Middle or Last descriptor */
@@ -2829,11 +2826,53 @@ static int mvneta_poll(struct napi_struct *napi, int budget)
 	return rx_done;
 }
 
+static int mvneta_create_page_pool(struct mvneta_port *pp,
+				   struct mvneta_rx_queue *rxq, int size)
+{
+	struct page_pool_params pp_params = {
+		.order = 0,
+		.flags = PP_FLAG_DMA_MAP,
+		.pool_size = size,
+		.nid = cpu_to_node(0),
+		.dev = pp->dev->dev.parent,
+		.dma_dir = DMA_FROM_DEVICE,
+	};
+	int err;
+
+	rxq->page_pool = page_pool_create(&pp_params);
+	if (IS_ERR(rxq->page_pool)) {
+		err = PTR_ERR(rxq->page_pool);
+		rxq->page_pool = NULL;
+		return err;
+	}
+
+	err = xdp_rxq_info_reg(&rxq->xdp_rxq, pp->dev, 0);
+	if (err < 0)
+		goto err_free_pp;
+
+	err = xdp_rxq_info_reg_mem_model(&rxq->xdp_rxq, MEM_TYPE_PAGE_POOL,
+					 rxq->page_pool);
+	if (err)
+		goto err_unregister_rxq;
+
+	return 0;
+
+err_unregister_rxq:
+	xdp_rxq_info_unreg(&rxq->xdp_rxq);
+err_free_pp:
+	page_pool_destroy(rxq->page_pool);
+	return err;
+}
+
 /* Handle rxq fill: allocates rxq skbs; called when initializing a port */
 static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
 			   int num)
 {
-	int i;
+	int i, err;
+
+	err = mvneta_create_page_pool(pp, rxq, num);
+	if (err < 0)
+		return err;
 
 	for (i = 0; i < num; i++) {
 		memset(rxq->descs + i, 0, sizeof(struct mvneta_rx_desc));
-- 
2.21.0


  parent reply	other threads:[~2019-10-09 23:19 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09 23:18 [PATCH v2 net-next 0/8] add XDP support to mvneta driver Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 1/8] net: mvneta: introduce mvneta_update_stats routine Lorenzo Bianconi
2019-10-09 23:18 ` Lorenzo Bianconi [this message]
2019-10-09 23:18 ` [PATCH v2 net-next 3/8] net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine Lorenzo Bianconi
2019-10-10  7:16   ` Ilias Apalodimas
2019-10-10  9:58     ` Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 4/8] net: mvneta: sync dma buffers before refilling hw queues Lorenzo Bianconi
2019-10-10  7:08   ` Jesper Dangaard Brouer
2019-10-10  7:21     ` Ilias Apalodimas
2019-10-10  9:18       ` Lorenzo Bianconi
2019-10-10  9:20     ` Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 5/8] net: mvneta: add basic XDP support Lorenzo Bianconi
2019-10-10  8:50   ` Jesper Dangaard Brouer
2019-10-10  9:57     ` Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 6/8] net: mvneta: move header prefetch in mvneta_swbm_rx_frame Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 7/8] net: mvneta: make tx buffer array agnostic Lorenzo Bianconi
2019-10-09 23:18 ` [PATCH v2 net-next 8/8] net: mvneta: add XDP_TX support Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bfef90c0ca5bf6fa172a63830533d9a783f5ceea.1570662004.git.lorenzo@kernel.org \
    --to=lorenzo@kernel.org \
    --cc=brouer@redhat.com \
    --cc=davem@davemloft.net \
    --cc=ilias.apalodimas@linaro.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=matteo.croce@redhat.com \
    --cc=mw@semihalf.com \
    --cc=netdev@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).