From: Heiner Kallweit <hkallweit1@gmail.com>
To: Ioana Ciornei <ciorneiioana@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Russell King <linux@armlinux.org.uk>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>,
Alexandru Ardelean <alexandru.ardelean@analog.com>,
Andre Edich <andre.edich@microchip.com>,
Antoine Tenart <atenart@kernel.org>,
Baruch Siach <baruch@tkos.co.il>,
Christophe Leroy <christophe.leroy@c-s.fr>,
Dan Murphy <dmurphy@ti.com>,
Divya Koppera <Divya.Koppera@microchip.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Hauke Mehrtens <hauke@hauke-m.de>,
Jerome Brunet <jbrunet@baylibre.com>,
Kavya Sree Kotagiri <kavyasree.kotagiri@microchip.com>,
Linus Walleij <linus.walleij@linaro.org>,
Marco Felsch <m.felsch@pengutronix.de>,
Marek Vasut <marex@denx.de>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Mathias Kresin <dev@kresin.me>,
Maxim Kochetkov <fido_max@inbox.ru>,
Michael Walle <michael@walle.cc>,
Neil Armstrong <narmstrong@baylibre.com>,
Nisar Sayed <Nisar.Sayed@microchip.com>,
Oleksij Rempel <o.rempel@pengutronix.de>,
Philippe Schenker <philippe.schenker@toradex.com>,
Willy Liu <willy.liu@realtek.com>,
Yuiko Oshino <yuiko.oshino@microchip.com>
Subject: Re: [PATCH net-next 00/19] net: phy: add support for shared interrupts (part 1)
Date: Fri, 30 Oct 2020 23:42:36 +0100 [thread overview]
Message-ID: <d05587fc-0cec-59fb-4e84-65386d0b3d6b@gmail.com> (raw)
In-Reply-To: <20201029100741.462818-1-ciorneiioana@gmail.com>
On 29.10.2020 11:07, Ioana Ciornei wrote:
> From: Ioana Ciornei <ioana.ciornei@nxp.com>
>
> This patch set aims to actually add support for shared interrupts in
> phylib and not only for multi-PHY devices. While we are at it,
> streamline the interrupt handling in phylib.
>
> For a bit of context, at the moment, there are multiple phy_driver ops
> that deal with this subject:
>
> - .config_intr() - Enable/disable the interrupt line.
>
> - .ack_interrupt() - Should quiesce any interrupts that may have been
> fired. It's also used by phylib in conjunction with .config_intr() to
> clear any pending interrupts after the line was disabled, and before
> it is going to be enabled.
>
> - .did_interrupt() - Intended for multi-PHY devices with a shared IRQ
> line and used by phylib to discern which PHY from the package was the
> one that actually fired the interrupt.
>
> - .handle_interrupt() - Completely overrides the default interrupt
> handling logic from phylib. The PHY driver is responsible for checking
> if any interrupt was fired by the respective PHY and choose
> accordingly if it's the one that should trigger the link state machine.
>
>>From my point of view, the interrupt handling in phylib has become
> somewhat confusing with all these callbacks that actually read the same
> PHY register - the interrupt status. A more streamlined approach would
> be to just move the responsibility to write an interrupt handler to the
> driver (as any other device driver does) and make .handle_interrupt()
> the only way to deal with interrupts.
>
> Another advantage with this approach would be that phylib would gain
> support for shared IRQs between different PHY (not just multi-PHY
> devices), something which at the moment would require extending every
> PHY driver anyway in order to implement their .did_interrupt() callback
> and duplicate the same logic as in .ack_interrupt(). The disadvantage
> of making .did_interrupt() mandatory would be that we are slightly
> changing the semantics of the phylib API and that would increase
> confusion instead of reducing it.
>
> What I am proposing is the following:
>
> - As a first step, make the .ack_interrupt() callback optional so that
> we do not break any PHY driver amid the transition.
>
> - Every PHY driver gains a .handle_interrupt() implementation that, for
> the most part, would look like below:
>
> irq_status = phy_read(phydev, INTR_STATUS);
> if (irq_status < 0) {
> phy_error(phydev);
> return IRQ_NONE;
> }
>
> if (irq_status == 0)
Here I have a concern, bits may be set even if the respective interrupt
source isn't enabled. Therefore we may falsely blame a device to have
triggered the interrupt. irq_status should be masked with the actually
enabled irq source bits.
> return IRQ_NONE;
>
> phy_trigger_machine(phydev);
>
> return IRQ_HANDLED;
>
> - Remove each PHY driver's implementation of the .ack_interrupt() by
> actually taking care of quiescing any pending interrupts before
> enabling/after disabling the interrupt line.
>
> - Finally, after all drivers have been ported, remove the
> .ack_interrupt() and .did_interrupt() callbacks from phy_driver.
>
> This patch set is part 1 and it addresses the changes needed in phylib
> and 7 PHY drivers. The rest can be found on my Github branch here:
> https://github.com/IoanaCiornei/linux/commits/phylib-shared-irq
>
> I do not have access to most of these PHY's, therefore I Cc-ed the
> latest contributors to the individual PHY drivers in order to have
> access, hopefully, to more regression testing.
>
> Ioana Ciornei (19):
> net: phy: export phy_error and phy_trigger_machine
> net: phy: add a shutdown procedure
> net: phy: make .ack_interrupt() optional
> net: phy: at803x: implement generic .handle_interrupt() callback
> net: phy: at803x: remove the use of .ack_interrupt()
> net: phy: mscc: use phy_trigger_machine() to notify link change
> net: phy: mscc: implement generic .handle_interrupt() callback
> net: phy: mscc: remove the use of .ack_interrupt()
> net: phy: aquantia: implement generic .handle_interrupt() callback
> net: phy: aquantia: remove the use of .ack_interrupt()
> net: phy: broadcom: implement generic .handle_interrupt() callback
> net: phy: broadcom: remove use of ack_interrupt()
> net: phy: cicada: implement the generic .handle_interrupt() callback
> net: phy: cicada: remove the use of .ack_interrupt()
> net: phy: davicom: implement generic .handle_interrupt() calback
> net: phy: davicom: remove the use of .ack_interrupt()
> net: phy: add genphy_handle_interrupt_no_ack()
> net: phy: realtek: implement generic .handle_interrupt() callback
> net: phy: realtek: remove the use of .ack_interrupt()
>
> drivers/net/phy/aquantia_main.c | 57 ++++++++++----
> drivers/net/phy/at803x.c | 42 ++++++++--
> drivers/net/phy/bcm-cygnus.c | 2 +-
> drivers/net/phy/bcm-phy-lib.c | 37 ++++++++-
> drivers/net/phy/bcm-phy-lib.h | 1 +
> drivers/net/phy/bcm54140.c | 39 +++++++---
> drivers/net/phy/bcm63xx.c | 20 +++--
> drivers/net/phy/bcm87xx.c | 50 ++++++------
> drivers/net/phy/broadcom.c | 70 ++++++++++++-----
> drivers/net/phy/cicada.c | 35 ++++++++-
> drivers/net/phy/davicom.c | 59 ++++++++++----
> drivers/net/phy/mscc/mscc_main.c | 70 +++++++++--------
> drivers/net/phy/phy.c | 6 +-
> drivers/net/phy/phy_device.c | 23 +++++-
> drivers/net/phy/realtek.c | 128 +++++++++++++++++++++++++++----
> include/linux/phy.h | 3 +
> 16 files changed, 484 insertions(+), 158 deletions(-)
>
> Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>
> Cc: Andre Edich <andre.edich@microchip.com>
> Cc: Antoine Tenart <atenart@kernel.org>
> Cc: Baruch Siach <baruch@tkos.co.il>
> Cc: Christophe Leroy <christophe.leroy@c-s.fr>
> Cc: Dan Murphy <dmurphy@ti.com>
> Cc: Divya Koppera <Divya.Koppera@microchip.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Hauke Mehrtens <hauke@hauke-m.de>
> Cc: Heiner Kallweit <hkallweit1@gmail.com>
> Cc: Jerome Brunet <jbrunet@baylibre.com>
> Cc: Kavya Sree Kotagiri <kavyasree.kotagiri@microchip.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Marco Felsch <m.felsch@pengutronix.de>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Cc: Mathias Kresin <dev@kresin.me>
> Cc: Maxim Kochetkov <fido_max@inbox.ru>
> Cc: Michael Walle <michael@walle.cc>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Nisar Sayed <Nisar.Sayed@microchip.com>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: Philippe Schenker <philippe.schenker@toradex.com>
> Cc: Willy Liu <willy.liu@realtek.com>
> Cc: Yuiko Oshino <yuiko.oshino@microchip.com>
>
next prev parent reply other threads:[~2020-10-30 22:42 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-29 10:07 [PATCH net-next 00/19] net: phy: add support for shared interrupts (part 1) Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 01/19] net: phy: export phy_error and phy_trigger_machine Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 02/19] net: phy: add a shutdown procedure Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 03/19] net: phy: make .ack_interrupt() optional Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 04/19] net: phy: at803x: implement generic .handle_interrupt() callback Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 05/19] net: phy: at803x: remove the use of .ack_interrupt() Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 06/19] net: phy: mscc: use phy_trigger_machine() to notify link change Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 07/19] net: phy: mscc: implement generic .handle_interrupt() callback Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 08/19] net: phy: mscc: remove the use of .ack_interrupt() Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 09/19] net: phy: aquantia: implement generic .handle_interrupt() callback Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 10/19] net: phy: aquantia: remove the use of .ack_interrupt() Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 11/19] net: phy: broadcom: implement generic .handle_interrupt() callback Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 12/19] net: phy: broadcom: remove use of ack_interrupt() Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 13/19] net: phy: cicada: implement the generic .handle_interrupt() callback Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 14/19] net: phy: cicada: remove the use of .ack_interrupt() Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 15/19] net: phy: davicom: implement generic .handle_interrupt() calback Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 16/19] net: phy: davicom: remove the use of .ack_interrupt() Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 17/19] net: phy: add genphy_handle_interrupt_no_ack() Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 18/19] net: phy: realtek: implement generic .handle_interrupt() callback Ioana Ciornei
2020-10-29 10:07 ` [PATCH net-next 19/19] net: phy: realtek: remove the use of .ack_interrupt() Ioana Ciornei
2020-10-30 21:56 ` [PATCH net-next 00/19] net: phy: add support for shared interrupts (part 1) Heiner Kallweit
2020-10-30 22:06 ` Vladimir Oltean
2020-10-30 22:33 ` Heiner Kallweit
2020-10-30 22:46 ` Vladimir Oltean
2020-10-31 5:27 ` Ioana Ciornei
2020-10-30 22:42 ` Heiner Kallweit [this message]
2020-10-30 23:36 ` Andrew Lunn
2020-10-31 5:22 ` Ioana Ciornei
2020-10-31 10:18 ` Heiner Kallweit
2020-10-31 10:57 ` Ioana Ciornei
2020-10-31 14:32 ` Andrew Lunn
2020-10-31 14:51 ` Ioana Ciornei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d05587fc-0cec-59fb-4e84-65386d0b3d6b@gmail.com \
--to=hkallweit1@gmail.com \
--cc=Divya.Koppera@microchip.com \
--cc=Nisar.Sayed@microchip.com \
--cc=alexandru.ardelean@analog.com \
--cc=andre.edich@microchip.com \
--cc=andrew@lunn.ch \
--cc=atenart@kernel.org \
--cc=baruch@tkos.co.il \
--cc=christophe.leroy@c-s.fr \
--cc=ciorneiioana@gmail.com \
--cc=dev@kresin.me \
--cc=dmurphy@ti.com \
--cc=f.fainelli@gmail.com \
--cc=fido_max@inbox.ru \
--cc=hauke@hauke-m.de \
--cc=ioana.ciornei@nxp.com \
--cc=jbrunet@baylibre.com \
--cc=kavyasree.kotagiri@microchip.com \
--cc=kuba@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=m.felsch@pengutronix.de \
--cc=marex@denx.de \
--cc=martin.blumenstingl@googlemail.com \
--cc=michael@walle.cc \
--cc=narmstrong@baylibre.com \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=philippe.schenker@toradex.com \
--cc=willy.liu@realtek.com \
--cc=yuiko.oshino@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).