Feb 20 19:21:10 vinco kernel: [ 0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26 Feb 20 19:21:10 vinco kernel: [ 0.000000] Linux version 5.4.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20200203 (Debian 9.2.1-28)) #1 SMP Debian 5.4.19-1 (2020-02-13) Feb 20 19:21:10 vinco kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-4-amd64 root=UUID=795ee075-978f-4245-9dad-ecccd37080d8 ro quiet apparmor=1 security=apparmor Feb 20 19:21:10 vinco kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' Feb 20 19:21:10 vinco kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' Feb 20 19:21:10 vinco kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' Feb 20 19:21:10 vinco kernel: [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 Feb 20 19:21:10 vinco kernel: [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-provided physical RAM map: Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9754fff] usable Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000b9755000-0x00000000b975bfff] ACPI NVS Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000b975c000-0x00000000b9fd4fff] usable Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000b9fd5000-0x00000000ba275fff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ba276000-0x00000000c98c5fff] usable Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000c98c6000-0x00000000c9acefff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000c9acf000-0x00000000c9e00fff] usable Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000c9e01000-0x00000000cab05fff] ACPI NVS Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000cab06000-0x00000000caf59fff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000caf5a000-0x00000000caffefff] type 20 Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved Feb 20 19:21:10 vinco kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f1fffff] usable Feb 20 19:21:10 vinco kernel: [ 0.000000] NX (Execute Disable) protection: active Feb 20 19:21:10 vinco kernel: [ 0.000000] efi: EFI v2.31 by American Megatrends Feb 20 19:21:10 vinco kernel: [ 0.000000] efi: ACPI 2.0=0xc9e89000 ACPI=0xc9e89000 SMBIOS=0xf04c0 MPS=0xfd5a0 Feb 20 19:21:10 vinco kernel: [ 0.000000] secureboot: Secure boot could not be determined (mode 0) Feb 20 19:21:10 vinco kernel: [ 0.000000] SMBIOS 2.7 present. Feb 20 19:21:10 vinco kernel: [ 0.000000] DMI: ASUSTeK COMPUTER INC. N551JM/N551JM, BIOS N551JM.205 02/13/2015 Feb 20 19:21:10 vinco kernel: [ 0.000000] tsc: Fast TSC calibration using PIT Feb 20 19:21:10 vinco kernel: [ 0.000000] tsc: Detected 2494.266 MHz processor Feb 20 19:21:10 vinco kernel: [ 0.001377] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved Feb 20 19:21:10 vinco kernel: [ 0.001378] e820: remove [mem 0x000a0000-0x000fffff] usable Feb 20 19:21:10 vinco kernel: [ 0.001384] last_pfn = 0x42f200 max_arch_pfn = 0x400000000 Feb 20 19:21:10 vinco kernel: [ 0.001387] MTRR default type: uncachable Feb 20 19:21:10 vinco kernel: [ 0.001387] MTRR fixed ranges enabled: Feb 20 19:21:10 vinco kernel: [ 0.001388] 00000-9FFFF write-back Feb 20 19:21:10 vinco kernel: [ 0.001389] A0000-BFFFF uncachable Feb 20 19:21:10 vinco kernel: [ 0.001389] C0000-CFFFF write-protect Feb 20 19:21:10 vinco kernel: [ 0.001390] D0000-DFFFF uncachable Feb 20 19:21:10 vinco kernel: [ 0.001390] E0000-FFFFF write-protect Feb 20 19:21:10 vinco kernel: [ 0.001391] MTRR variable ranges enabled: Feb 20 19:21:10 vinco kernel: [ 0.001392] 0 base 0000000000 mask 7C00000000 write-back Feb 20 19:21:10 vinco kernel: [ 0.001392] 1 base 0400000000 mask 7FE0000000 write-back Feb 20 19:21:10 vinco kernel: [ 0.001393] 2 base 0420000000 mask 7FF0000000 write-back Feb 20 19:21:10 vinco kernel: [ 0.001394] 3 base 00E0000000 mask 7FE0000000 uncachable Feb 20 19:21:10 vinco kernel: [ 0.001394] 4 base 00D0000000 mask 7FF0000000 uncachable Feb 20 19:21:10 vinco kernel: [ 0.001395] 5 base 00CC000000 mask 7FFC000000 uncachable Feb 20 19:21:10 vinco kernel: [ 0.001395] 6 base 00CBC00000 mask 7FFFC00000 uncachable Feb 20 19:21:10 vinco kernel: [ 0.001396] 7 base 042F800000 mask 7FFF800000 uncachable Feb 20 19:21:10 vinco kernel: [ 0.001396] 8 base 042F400000 mask 7FFFC00000 uncachable Feb 20 19:21:10 vinco kernel: [ 0.001397] 9 base 042F200000 mask 7FFFE00000 uncachable Feb 20 19:21:10 vinco kernel: [ 0.001661] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Feb 20 19:21:10 vinco kernel: [ 0.001766] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved Feb 20 19:21:10 vinco kernel: [ 0.001769] last_pfn = 0xcb000 max_arch_pfn = 0x400000000 Feb 20 19:21:10 vinco kernel: [ 0.007737] found SMP MP-table at [mem 0x000fd8a0-0x000fd8af] Feb 20 19:21:10 vinco kernel: [ 0.007751] Using GB pages for direct mapping Feb 20 19:21:10 vinco kernel: [ 0.007753] BRK [0x186601000, 0x186601fff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.007754] BRK [0x186602000, 0x186602fff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.007754] BRK [0x186603000, 0x186603fff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.007774] BRK [0x186604000, 0x186604fff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.007775] BRK [0x186605000, 0x186605fff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.007861] BRK [0x186606000, 0x186606fff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.007876] BRK [0x186607000, 0x186607fff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.007906] BRK [0x186608000, 0x186608fff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.007920] BRK [0x186609000, 0x186609fff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.007932] BRK [0x18660a000, 0x18660afff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.007962] BRK [0x18660b000, 0x18660bfff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.008011] BRK [0x18660c000, 0x18660cfff] PGTABLE Feb 20 19:21:10 vinco kernel: [ 0.008166] RAMDISK: [mem 0x30e85000-0x34739fff] Feb 20 19:21:10 vinco kernel: [ 0.008171] ACPI: Early table checksum verification disabled Feb 20 19:21:10 vinco kernel: [ 0.008173] ACPI: RSDP 0x00000000C9E89000 000024 (v02 _ASUS_) Feb 20 19:21:10 vinco kernel: [ 0.008176] ACPI: XSDT 0x00000000C9E89088 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013) Feb 20 19:21:10 vinco kernel: [ 0.008180] ACPI: FACP 0x00000000C9E9CF38 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013) Feb 20 19:21:10 vinco kernel: [ 0.008184] ACPI: DSDT 0x00000000C9E89240 013CF2 (v02 _ASUS_ Notebook 00000012 INTL 20120711) Feb 20 19:21:10 vinco kernel: [ 0.008186] ACPI: FACS 0x00000000CAB03F80 000040 Feb 20 19:21:10 vinco kernel: [ 0.008188] ACPI: APIC 0x00000000C9E9D048 000092 (v03 _ASUS_ Notebook 01072009 AMI 00010013) Feb 20 19:21:10 vinco kernel: [ 0.008189] ACPI: FPDT 0x00000000C9E9D0E0 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) Feb 20 19:21:10 vinco kernel: [ 0.008191] ACPI: ECDT 0x00000000C9E9D128 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) Feb 20 19:21:10 vinco kernel: [ 0.008193] ACPI: SSDT 0x00000000C9E9D1F0 00019D (v01 Intel zpodd 00001000 INTL 20120711) Feb 20 19:21:10 vinco kernel: [ 0.008195] ACPI: SSDT 0x00000000C9E9D390 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) Feb 20 19:21:10 vinco kernel: [ 0.008197] ACPI: SSDT 0x00000000C9E9D8D0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) Feb 20 19:21:10 vinco kernel: [ 0.008198] ACPI: MCFG 0x00000000C9E9E3A8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097) Feb 20 19:21:10 vinco kernel: [ 0.008200] ACPI: HPET 0x00000000C9E9E3E8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) Feb 20 19:21:10 vinco kernel: [ 0.008202] ACPI: SSDT 0x00000000C9E9E420 000298 (v01 SataRe SataTabl 00001000 INTL 20120711) Feb 20 19:21:10 vinco kernel: [ 0.008204] ACPI: SSDT 0x00000000C9E9E6B8 004541 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) Feb 20 19:21:10 vinco kernel: [ 0.008205] ACPI: SSDT 0x00000000C9EA2C00 001983 (v01 SgRef SgPeg 00001000 INTL 20120711) Feb 20 19:21:10 vinco kernel: [ 0.008207] ACPI: DMAR 0x00000000C9EA4588 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) Feb 20 19:21:10 vinco kernel: [ 0.008209] ACPI: SSDT 0x00000000C9EA4640 0019CA (v01 OptRef OptTabl 00001000 INTL 20120711) Feb 20 19:21:10 vinco kernel: [ 0.008211] ACPI: MSDM 0x00000000C9ACDE18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001) Feb 20 19:21:10 vinco kernel: [ 0.008217] ACPI: Local APIC address 0xfee00000 Feb 20 19:21:10 vinco kernel: [ 0.008281] No NUMA configuration found Feb 20 19:21:10 vinco kernel: [ 0.008281] Faking a node at [mem 0x0000000000000000-0x000000042f1fffff] Feb 20 19:21:10 vinco kernel: [ 0.008284] NODE_DATA(0) allocated [mem 0x42f1f9000-0x42f1fdfff] Feb 20 19:21:10 vinco kernel: [ 0.008308] Zone ranges: Feb 20 19:21:10 vinco kernel: [ 0.008309] DMA [mem 0x0000000000001000-0x0000000000ffffff] Feb 20 19:21:10 vinco kernel: [ 0.008310] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Feb 20 19:21:10 vinco kernel: [ 0.008310] Normal [mem 0x0000000100000000-0x000000042f1fffff] Feb 20 19:21:10 vinco kernel: [ 0.008311] Device empty Feb 20 19:21:10 vinco kernel: [ 0.008311] Movable zone start for each node Feb 20 19:21:10 vinco kernel: [ 0.008312] Early memory node ranges Feb 20 19:21:10 vinco kernel: [ 0.008313] node 0: [mem 0x0000000000001000-0x0000000000057fff] Feb 20 19:21:10 vinco kernel: [ 0.008313] node 0: [mem 0x0000000000059000-0x000000000009efff] Feb 20 19:21:10 vinco kernel: [ 0.008314] node 0: [mem 0x0000000000100000-0x00000000b9754fff] Feb 20 19:21:10 vinco kernel: [ 0.008314] node 0: [mem 0x00000000b975c000-0x00000000b9fd4fff] Feb 20 19:21:10 vinco kernel: [ 0.008315] node 0: [mem 0x00000000ba276000-0x00000000c98c5fff] Feb 20 19:21:10 vinco kernel: [ 0.008315] node 0: [mem 0x00000000c9acf000-0x00000000c9e00fff] Feb 20 19:21:10 vinco kernel: [ 0.008315] node 0: [mem 0x00000000cafff000-0x00000000caffffff] Feb 20 19:21:10 vinco kernel: [ 0.008316] node 0: [mem 0x0000000100000000-0x000000042f1fffff] Feb 20 19:21:10 vinco kernel: [ 0.008536] Zeroed struct page in unavailable ranges: 29970 pages Feb 20 19:21:10 vinco kernel: [ 0.008537] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f1fffff] Feb 20 19:21:10 vinco kernel: [ 0.008538] On node 0 totalpages: 4164334 Feb 20 19:21:10 vinco kernel: [ 0.008539] DMA zone: 64 pages used for memmap Feb 20 19:21:10 vinco kernel: [ 0.008539] DMA zone: 26 pages reserved Feb 20 19:21:10 vinco kernel: [ 0.008540] DMA zone: 3997 pages, LIFO batch:0 Feb 20 19:21:10 vinco kernel: [ 0.008577] DMA32 zone: 12838 pages used for memmap Feb 20 19:21:10 vinco kernel: [ 0.008577] DMA32 zone: 821585 pages, LIFO batch:63 Feb 20 19:21:10 vinco kernel: [ 0.016419] Normal zone: 52168 pages used for memmap Feb 20 19:21:10 vinco kernel: [ 0.016420] Normal zone: 3338752 pages, LIFO batch:63 Feb 20 19:21:10 vinco kernel: [ 0.044926] Reserving Intel graphics memory at [mem 0xcbe00000-0xcfdfffff] Feb 20 19:21:10 vinco kernel: [ 0.045094] ACPI: PM-Timer IO Port: 0x1808 Feb 20 19:21:10 vinco kernel: [ 0.045096] ACPI: Local APIC address 0xfee00000 Feb 20 19:21:10 vinco kernel: [ 0.045100] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Feb 20 19:21:10 vinco kernel: [ 0.045111] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 Feb 20 19:21:10 vinco kernel: [ 0.045112] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Feb 20 19:21:10 vinco kernel: [ 0.045113] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Feb 20 19:21:10 vinco kernel: [ 0.045114] ACPI: IRQ0 used by override. Feb 20 19:21:10 vinco kernel: [ 0.045115] ACPI: IRQ9 used by override. Feb 20 19:21:10 vinco kernel: [ 0.045116] Using ACPI (MADT) for SMP configuration information Feb 20 19:21:10 vinco kernel: [ 0.045117] ACPI: HPET id: 0x8086a701 base: 0xfed00000 Feb 20 19:21:10 vinco kernel: [ 0.045120] smpboot: Allowing 8 CPUs, 0 hotplug CPUs Feb 20 19:21:10 vinco kernel: [ 0.045137] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] Feb 20 19:21:10 vinco kernel: [ 0.045138] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] Feb 20 19:21:10 vinco kernel: [ 0.045139] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] Feb 20 19:21:10 vinco kernel: [ 0.045140] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] Feb 20 19:21:10 vinco kernel: [ 0.045141] PM: Registered nosave memory: [mem 0xb9755000-0xb975bfff] Feb 20 19:21:10 vinco kernel: [ 0.045142] PM: Registered nosave memory: [mem 0xb9fd5000-0xba275fff] Feb 20 19:21:10 vinco kernel: [ 0.045143] PM: Registered nosave memory: [mem 0xc98c6000-0xc9acefff] Feb 20 19:21:10 vinco kernel: [ 0.045144] PM: Registered nosave memory: [mem 0xc9e01000-0xcab05fff] Feb 20 19:21:10 vinco kernel: [ 0.045145] PM: Registered nosave memory: [mem 0xcab06000-0xcaf59fff] Feb 20 19:21:10 vinco kernel: [ 0.045145] PM: Registered nosave memory: [mem 0xcaf5a000-0xcaffefff] Feb 20 19:21:10 vinco kernel: [ 0.045146] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff] Feb 20 19:21:10 vinco kernel: [ 0.045147] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff] Feb 20 19:21:10 vinco kernel: [ 0.045147] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff] Feb 20 19:21:10 vinco kernel: [ 0.045148] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] Feb 20 19:21:10 vinco kernel: [ 0.045148] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] Feb 20 19:21:10 vinco kernel: [ 0.045148] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] Feb 20 19:21:10 vinco kernel: [ 0.045149] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] Feb 20 19:21:10 vinco kernel: [ 0.045149] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] Feb 20 19:21:10 vinco kernel: [ 0.045150] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] Feb 20 19:21:10 vinco kernel: [ 0.045150] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] Feb 20 19:21:10 vinco kernel: [ 0.045150] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] Feb 20 19:21:10 vinco kernel: [ 0.045151] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] Feb 20 19:21:10 vinco kernel: [ 0.045151] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] Feb 20 19:21:10 vinco kernel: [ 0.045152] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] Feb 20 19:21:10 vinco kernel: [ 0.045153] [mem 0xcfe00000-0xf7ffffff] available for PCI devices Feb 20 19:21:10 vinco kernel: [ 0.045154] Booting paravirtualized kernel on bare hardware Feb 20 19:21:10 vinco kernel: [ 0.045157] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns Feb 20 19:21:10 vinco kernel: [ 0.112576] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 Feb 20 19:21:10 vinco kernel: [ 0.112741] percpu: Embedded 53 pages/cpu s178584 r8192 d30312 u262144 Feb 20 19:21:10 vinco kernel: [ 0.112746] pcpu-alloc: s178584 r8192 d30312 u262144 alloc=1*2097152 Feb 20 19:21:10 vinco kernel: [ 0.112747] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Feb 20 19:21:10 vinco kernel: [ 0.112766] Built 1 zonelists, mobility grouping on. Total pages: 4099238 Feb 20 19:21:10 vinco kernel: [ 0.112766] Policy zone: Normal Feb 20 19:21:10 vinco kernel: [ 0.112767] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-4-amd64 root=UUID=795ee075-978f-4245-9dad-ecccd37080d8 ro quiet apparmor=1 security=apparmor Feb 20 19:21:10 vinco kernel: [ 0.113510] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) Feb 20 19:21:10 vinco kernel: [ 0.113853] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) Feb 20 19:21:10 vinco kernel: [ 0.113909] mem auto-init: stack:off, heap alloc:off, heap free:off Feb 20 19:21:10 vinco kernel: [ 0.116680] Calgary: detecting Calgary via BIOS EBDA area Feb 20 19:21:10 vinco kernel: [ 0.116681] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Feb 20 19:21:10 vinco kernel: [ 0.152090] Memory: 16022816K/16657336K available (10243K kernel code, 1197K rwdata, 3736K rodata, 1672K init, 2048K bss, 634520K reserved, 0K cma-reserved) Feb 20 19:21:10 vinco kernel: [ 0.152190] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Feb 20 19:21:10 vinco kernel: [ 0.152199] Kernel/User page tables isolation: enabled Feb 20 19:21:10 vinco kernel: [ 0.152209] ftrace: allocating 33946 entries in 133 pages Feb 20 19:21:10 vinco kernel: [ 0.161759] rcu: Hierarchical RCU implementation. Feb 20 19:21:10 vinco kernel: [ 0.161760] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. Feb 20 19:21:10 vinco kernel: [ 0.161761] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Feb 20 19:21:10 vinco kernel: [ 0.161761] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 Feb 20 19:21:10 vinco kernel: [ 0.163854] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16 Feb 20 19:21:10 vinco kernel: [ 0.164030] random: crng done (trusting CPU's manufacturer) Feb 20 19:21:10 vinco kernel: [ 0.164046] Console: colour dummy device 80x25 Feb 20 19:21:10 vinco kernel: [ 0.164050] printk: console [tty0] enabled Feb 20 19:21:10 vinco kernel: [ 0.164061] ACPI: Core revision 20190816 Feb 20 19:21:10 vinco kernel: [ 0.164183] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns Feb 20 19:21:10 vinco kernel: [ 0.164194] APIC: Switch to symmetric I/O mode setup Feb 20 19:21:10 vinco kernel: [ 0.164195] DMAR: Host address width 39 Feb 20 19:21:10 vinco kernel: [ 0.164196] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 Feb 20 19:21:10 vinco kernel: [ 0.164199] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a Feb 20 19:21:10 vinco kernel: [ 0.164200] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 Feb 20 19:21:10 vinco kernel: [ 0.164202] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da Feb 20 19:21:10 vinco kernel: [ 0.164202] DMAR: RMRR base: 0x000000c9a56000 end: 0x000000c9a62fff Feb 20 19:21:10 vinco kernel: [ 0.164203] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff Feb 20 19:21:10 vinco kernel: [ 0.164204] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 Feb 20 19:21:10 vinco kernel: [ 0.164205] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 Feb 20 19:21:10 vinco kernel: [ 0.164205] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. Feb 20 19:21:10 vinco kernel: [ 0.164575] DMAR-IR: Enabled IRQ remapping in x2apic mode Feb 20 19:21:10 vinco kernel: [ 0.164576] x2apic enabled Feb 20 19:21:10 vinco kernel: [ 0.164581] Switched APIC routing to cluster x2apic. Feb 20 19:21:10 vinco kernel: [ 0.164953] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 20 19:21:10 vinco kernel: [ 0.184195] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f41115f43, max_idle_ns: 440795273768 ns Feb 20 19:21:10 vinco kernel: [ 0.184198] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.53 BogoMIPS (lpj=9977064) Feb 20 19:21:10 vinco kernel: [ 0.184200] pid_max: default: 32768 minimum: 301 Feb 20 19:21:10 vinco kernel: [ 0.188820] LSM: Security Framework initializing Feb 20 19:21:10 vinco kernel: [ 0.188825] Yama: disabled by default; enable with sysctl kernel.yama.* Feb 20 19:21:10 vinco kernel: [ 0.188843] AppArmor: AppArmor initialized Feb 20 19:21:10 vinco kernel: [ 0.188878] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) Feb 20 19:21:10 vinco kernel: [ 0.188906] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) Feb 20 19:21:10 vinco kernel: [ 0.189089] mce: CPU0: Thermal monitoring enabled (TM1) Feb 20 19:21:10 vinco kernel: [ 0.189101] process: using mwait in idle threads Feb 20 19:21:10 vinco kernel: [ 0.189103] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 Feb 20 19:21:10 vinco kernel: [ 0.189104] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 Feb 20 19:21:10 vinco kernel: [ 0.189106] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization Feb 20 19:21:10 vinco kernel: [ 0.189107] Spectre V2 : Mitigation: Full generic retpoline Feb 20 19:21:10 vinco kernel: [ 0.189107] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch Feb 20 19:21:10 vinco kernel: [ 0.189107] Spectre V2 : Enabling Restricted Speculation for firmware calls Feb 20 19:21:10 vinco kernel: [ 0.189108] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier Feb 20 19:21:10 vinco kernel: [ 0.189109] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl Feb 20 19:21:10 vinco kernel: [ 0.189110] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp Feb 20 19:21:10 vinco kernel: [ 0.189112] MDS: Mitigation: Clear CPU buffers Feb 20 19:21:10 vinco kernel: [ 0.189242] Freeing SMP alternatives memory: 24K Feb 20 19:21:10 vinco kernel: [ 0.191378] TSC deadline timer enabled Feb 20 19:21:10 vinco kernel: [ 0.191380] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) Feb 20 19:21:10 vinco kernel: [ 0.191453] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. Feb 20 19:21:10 vinco kernel: [ 0.191466] ... version: 3 Feb 20 19:21:10 vinco kernel: [ 0.191467] ... bit width: 48 Feb 20 19:21:10 vinco kernel: [ 0.191467] ... generic registers: 4 Feb 20 19:21:10 vinco kernel: [ 0.191467] ... value mask: 0000ffffffffffff Feb 20 19:21:10 vinco kernel: [ 0.191468] ... max period: 00007fffffffffff Feb 20 19:21:10 vinco kernel: [ 0.191468] ... fixed-purpose events: 3 Feb 20 19:21:10 vinco kernel: [ 0.191468] ... event mask: 000000070000000f Feb 20 19:21:10 vinco kernel: [ 0.191493] rcu: Hierarchical SRCU implementation. Feb 20 19:21:10 vinco kernel: [ 0.192090] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. Feb 20 19:21:10 vinco kernel: [ 0.192139] smp: Bringing up secondary CPUs ... Feb 20 19:21:10 vinco kernel: [ 0.192189] x86: Booting SMP configuration: Feb 20 19:21:10 vinco kernel: [ 0.192190] .... node #0, CPUs: #1 #2 #3 #4 Feb 20 19:21:10 vinco kernel: [ 0.193660] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. Feb 20 19:21:10 vinco kernel: [ 0.193660] #5 #6 #7 Feb 20 19:21:10 vinco kernel: [ 0.193660] smp: Brought up 1 node, 8 CPUs Feb 20 19:21:10 vinco kernel: [ 0.193660] smpboot: Max logical packages: 1 Feb 20 19:21:10 vinco kernel: [ 0.193660] smpboot: Total of 8 processors activated (39908.25 BogoMIPS) Feb 20 19:21:10 vinco kernel: [ 0.196510] devtmpfs: initialized Feb 20 19:21:10 vinco kernel: [ 0.196510] x86/mm: Memory block size: 128MB Feb 20 19:21:10 vinco kernel: [ 0.197362] PM: Registering ACPI NVS region [mem 0xb9755000-0xb975bfff] (28672 bytes) Feb 20 19:21:10 vinco kernel: [ 0.197362] PM: Registering ACPI NVS region [mem 0xc9e01000-0xcab05fff] (13651968 bytes) Feb 20 19:21:10 vinco kernel: [ 0.197362] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Feb 20 19:21:10 vinco kernel: [ 0.197362] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) Feb 20 19:21:10 vinco kernel: [ 0.197362] pinctrl core: initialized pinctrl subsystem Feb 20 19:21:10 vinco kernel: [ 0.197362] NET: Registered protocol family 16 Feb 20 19:21:10 vinco kernel: [ 0.197362] audit: initializing netlink subsys (disabled) Feb 20 19:21:10 vinco kernel: [ 0.197362] audit: type=2000 audit(1582219265.032:1): state=initialized audit_enabled=0 res=1 Feb 20 19:21:10 vinco kernel: [ 0.197362] cpuidle: using governor ladder Feb 20 19:21:10 vinco kernel: [ 0.197362] cpuidle: using governor menu Feb 20 19:21:10 vinco kernel: [ 0.197362] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it Feb 20 19:21:10 vinco kernel: [ 0.197362] ACPI: bus type PCI registered Feb 20 19:21:10 vinco kernel: [ 0.197362] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Feb 20 19:21:10 vinco kernel: [ 0.197362] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) Feb 20 19:21:10 vinco kernel: [ 0.197362] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 Feb 20 19:21:10 vinco kernel: [ 0.197362] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. Feb 20 19:21:10 vinco kernel: [ 0.197362] PCI: Using configuration type 1 for base access Feb 20 19:21:10 vinco kernel: [ 0.197362] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on Feb 20 19:21:10 vinco kernel: [ 0.197362] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' Feb 20 19:21:10 vinco kernel: [ 0.197362] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages Feb 20 19:21:10 vinco kernel: [ 0.197362] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages Feb 20 19:21:10 vinco kernel: [ 0.316351] ACPI: Added _OSI(Module Device) Feb 20 19:21:10 vinco kernel: [ 0.316351] ACPI: Added _OSI(Processor Device) Feb 20 19:21:10 vinco kernel: [ 0.316351] ACPI: Added _OSI(3.0 _SCP Extensions) Feb 20 19:21:10 vinco kernel: [ 0.316351] ACPI: Added _OSI(Processor Aggregator Device) Feb 20 19:21:10 vinco kernel: [ 0.316351] ACPI: Added _OSI(Linux-Dell-Video) Feb 20 19:21:10 vinco kernel: [ 0.316351] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) Feb 20 19:21:10 vinco kernel: [ 0.316351] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) Feb 20 19:21:10 vinco kernel: [ 0.328639] ACPI: 8 ACPI AML tables successfully acquired and loaded Feb 20 19:21:10 vinco kernel: [ 0.329146] ACPI: EC: EC started Feb 20 19:21:10 vinco kernel: [ 0.329147] ACPI: EC: interrupt blocked Feb 20 19:21:10 vinco kernel: [ 0.329946] ACPI: \: Used as first EC Feb 20 19:21:10 vinco kernel: [ 0.329947] ACPI: \: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62 Feb 20 19:21:10 vinco kernel: [ 0.329947] ACPI: EC: Boot ECDT EC used to handle transactions Feb 20 19:21:10 vinco kernel: [ 0.330576] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored Feb 20 19:21:10 vinco kernel: [ 0.333296] ACPI: Dynamic OEM Table Load: Feb 20 19:21:10 vinco kernel: [ 0.333300] ACPI: SSDT 0xFFFF9F661C7F2400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) Feb 20 19:21:10 vinco kernel: [ 0.334020] ACPI: Dynamic OEM Table Load: Feb 20 19:21:10 vinco kernel: [ 0.334023] ACPI: SSDT 0xFFFF9F661C08A800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) Feb 20 19:21:10 vinco kernel: [ 0.334767] ACPI: Dynamic OEM Table Load: Feb 20 19:21:10 vinco kernel: [ 0.334769] ACPI: SSDT 0xFFFF9F661C7E9200 000119 (v01 PmRef ApCst 00003000 INTL 20120711) Feb 20 19:21:10 vinco kernel: [ 0.336322] ACPI: Interpreter enabled Feb 20 19:21:10 vinco kernel: [ 0.336347] ACPI: (supports S0 S3 S4 S5) Feb 20 19:21:10 vinco kernel: [ 0.336348] ACPI: Using IOAPIC for interrupt routing Feb 20 19:21:10 vinco kernel: [ 0.336370] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Feb 20 19:21:10 vinco kernel: [ 0.336573] ACPI: Enabled 7 GPEs in block 00 to 3F Feb 20 19:21:10 vinco kernel: [ 0.340282] ACPI: Power Resource [PG00] (on) Feb 20 19:21:10 vinco kernel: [ 0.343983] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) Feb 20 19:21:10 vinco kernel: [ 0.343986] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] Feb 20 19:21:10 vinco kernel: [ 0.344455] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] Feb 20 19:21:10 vinco kernel: [ 0.344456] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration Feb 20 19:21:10 vinco kernel: [ 0.344737] PCI host bridge to bus 0000:00 Feb 20 19:21:10 vinco kernel: [ 0.344739] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] Feb 20 19:21:10 vinco kernel: [ 0.344740] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] Feb 20 19:21:10 vinco kernel: [ 0.344741] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] Feb 20 19:21:10 vinco kernel: [ 0.344741] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] Feb 20 19:21:10 vinco kernel: [ 0.344742] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] Feb 20 19:21:10 vinco kernel: [ 0.344743] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] Feb 20 19:21:10 vinco kernel: [ 0.344743] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] Feb 20 19:21:10 vinco kernel: [ 0.344744] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window] Feb 20 19:21:10 vinco kernel: [ 0.344745] pci_bus 0000:00: root bus resource [bus 00-3e] Feb 20 19:21:10 vinco kernel: [ 0.344751] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000 Feb 20 19:21:10 vinco kernel: [ 0.344814] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 Feb 20 19:21:10 vinco kernel: [ 0.344846] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.344939] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000 Feb 20 19:21:10 vinco kernel: [ 0.344947] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] Feb 20 19:21:10 vinco kernel: [ 0.344951] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] Feb 20 19:21:10 vinco kernel: [ 0.344954] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] Feb 20 19:21:10 vinco kernel: [ 0.344963] pci 0000:00:02.0: BAR 2: assigned to efifb Feb 20 19:21:10 vinco kernel: [ 0.345017] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 Feb 20 19:21:10 vinco kernel: [ 0.345024] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit] Feb 20 19:21:10 vinco kernel: [ 0.345104] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 Feb 20 19:21:10 vinco kernel: [ 0.345123] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit] Feb 20 19:21:10 vinco kernel: [ 0.345174] pci 0000:00:14.0: PME# supported from D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.345232] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 Feb 20 19:21:10 vinco kernel: [ 0.345251] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit] Feb 20 19:21:10 vinco kernel: [ 0.345305] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.345362] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 Feb 20 19:21:10 vinco kernel: [ 0.345381] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff] Feb 20 19:21:10 vinco kernel: [ 0.345454] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.345516] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 Feb 20 19:21:10 vinco kernel: [ 0.345533] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit] Feb 20 19:21:10 vinco kernel: [ 0.345593] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.345651] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 Feb 20 19:21:10 vinco kernel: [ 0.345720] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.345736] pci 0000:00:1c.0: Enabling MPC IRBNCE Feb 20 19:21:10 vinco kernel: [ 0.345738] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled Feb 20 19:21:10 vinco kernel: [ 0.345822] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 Feb 20 19:21:10 vinco kernel: [ 0.345910] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.345925] pci 0000:00:1c.1: Enabling MPC IRBNCE Feb 20 19:21:10 vinco kernel: [ 0.345927] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled Feb 20 19:21:10 vinco kernel: [ 0.346006] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 Feb 20 19:21:10 vinco kernel: [ 0.346076] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.346090] pci 0000:00:1c.2: Enabling MPC IRBNCE Feb 20 19:21:10 vinco kernel: [ 0.346092] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled Feb 20 19:21:10 vinco kernel: [ 0.346175] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 Feb 20 19:21:10 vinco kernel: [ 0.346244] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.346259] pci 0000:00:1c.3: Enabling MPC IRBNCE Feb 20 19:21:10 vinco kernel: [ 0.346261] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled Feb 20 19:21:10 vinco kernel: [ 0.346347] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 Feb 20 19:21:10 vinco kernel: [ 0.346367] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff] Feb 20 19:21:10 vinco kernel: [ 0.346441] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.346504] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100 Feb 20 19:21:10 vinco kernel: [ 0.346651] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601 Feb 20 19:21:10 vinco kernel: [ 0.346665] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] Feb 20 19:21:10 vinco kernel: [ 0.346671] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] Feb 20 19:21:10 vinco kernel: [ 0.346677] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] Feb 20 19:21:10 vinco kernel: [ 0.346683] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] Feb 20 19:21:10 vinco kernel: [ 0.346689] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] Feb 20 19:21:10 vinco kernel: [ 0.346695] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff] Feb 20 19:21:10 vinco kernel: [ 0.346725] pci 0000:00:1f.2: PME# supported from D3hot Feb 20 19:21:10 vinco kernel: [ 0.346778] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 Feb 20 19:21:10 vinco kernel: [ 0.346794] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit] Feb 20 19:21:10 vinco kernel: [ 0.346811] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] Feb 20 19:21:10 vinco kernel: [ 0.346915] pci 0000:01:00.0: [10de:1392] type 00 class 0x030200 Feb 20 19:21:10 vinco kernel: [ 0.346939] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] Feb 20 19:21:10 vinco kernel: [ 0.346954] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] Feb 20 19:21:10 vinco kernel: [ 0.346969] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] Feb 20 19:21:10 vinco kernel: [ 0.346980] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] Feb 20 19:21:10 vinco kernel: [ 0.346990] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] Feb 20 19:21:10 vinco kernel: [ 0.347007] pci 0000:01:00.0: Enabling HDA controller Feb 20 19:21:10 vinco kernel: [ 0.347158] pci 0000:00:01.0: PCI bridge to [bus 01] Feb 20 19:21:10 vinco kernel: [ 0.347159] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Feb 20 19:21:10 vinco kernel: [ 0.347161] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] Feb 20 19:21:10 vinco kernel: [ 0.347163] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] Feb 20 19:21:10 vinco kernel: [ 0.347206] acpiphp: Slot [1] registered Feb 20 19:21:10 vinco kernel: [ 0.347210] pci 0000:00:1c.0: PCI bridge to [bus 02] Feb 20 19:21:10 vinco kernel: [ 0.347265] pci 0000:00:1c.1: PCI bridge to [bus 03] Feb 20 19:21:10 vinco kernel: [ 0.347361] pci 0000:04:00.0: [8086:08b1] type 00 class 0x028000 Feb 20 19:21:10 vinco kernel: [ 0.347437] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf7901fff 64bit] Feb 20 19:21:10 vinco kernel: [ 0.347702] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.347901] pci 0000:00:1c.2: PCI bridge to [bus 04] Feb 20 19:21:10 vinco kernel: [ 0.347905] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff] Feb 20 19:21:10 vinco kernel: [ 0.347969] pci 0000:05:00.0: [10ec:5287] type 00 class 0xff0000 Feb 20 19:21:10 vinco kernel: [ 0.347999] pci 0000:05:00.0: reg 0x10: [mem 0xf7815000-0xf7815fff] Feb 20 19:21:10 vinco kernel: [ 0.348059] pci 0000:05:00.0: reg 0x30: [mem 0xf7800000-0xf780ffff pref] Feb 20 19:21:10 vinco kernel: [ 0.348150] pci 0000:05:00.0: supports D1 D2 Feb 20 19:21:10 vinco kernel: [ 0.348151] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.348258] pci 0000:05:00.1: [10ec:8168] type 00 class 0x020000 Feb 20 19:21:10 vinco kernel: [ 0.348287] pci 0000:05:00.1: reg 0x10: [io 0xd000-0xd0ff] Feb 20 19:21:10 vinco kernel: [ 0.348314] pci 0000:05:00.1: reg 0x18: [mem 0xf7814000-0xf7814fff 64bit] Feb 20 19:21:10 vinco kernel: [ 0.348330] pci 0000:05:00.1: reg 0x20: [mem 0xf7810000-0xf7813fff 64bit] Feb 20 19:21:10 vinco kernel: [ 0.348429] pci 0000:05:00.1: supports D1 D2 Feb 20 19:21:10 vinco kernel: [ 0.348430] pci 0000:05:00.1: PME# supported from D0 D1 D2 D3hot D3cold Feb 20 19:21:10 vinco kernel: [ 0.348559] pci 0000:00:1c.3: PCI bridge to [bus 05] Feb 20 19:21:10 vinco kernel: [ 0.348562] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Feb 20 19:21:10 vinco kernel: [ 0.348564] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff] Feb 20 19:21:10 vinco kernel: [ 0.349132] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) Feb 20 19:21:10 vinco kernel: [ 0.349166] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12) Feb 20 19:21:10 vinco kernel: [ 0.349198] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 12) Feb 20 19:21:10 vinco kernel: [ 0.349229] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12) Feb 20 19:21:10 vinco kernel: [ 0.349260] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled. Feb 20 19:21:10 vinco kernel: [ 0.349291] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled. Feb 20 19:21:10 vinco kernel: [ 0.349322] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12) Feb 20 19:21:10 vinco kernel: [ 0.349352] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12) Feb 20 19:21:10 vinco kernel: [ 0.349617] ACPI: EC: interrupt unblocked Feb 20 19:21:10 vinco kernel: [ 0.349624] ACPI: EC: event unblocked Feb 20 19:21:10 vinco kernel: [ 0.349641] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62 Feb 20 19:21:10 vinco kernel: [ 0.349642] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events Feb 20 19:21:10 vinco kernel: [ 0.349686] iommu: Default domain type: Translated Feb 20 19:21:10 vinco kernel: [ 0.349694] pci 0000:00:02.0: vgaarb: setting as boot VGA device Feb 20 19:21:10 vinco kernel: [ 0.349694] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none Feb 20 19:21:10 vinco kernel: [ 0.349694] pci 0000:00:02.0: vgaarb: bridge control possible Feb 20 19:21:10 vinco kernel: [ 0.349694] vgaarb: loaded Feb 20 19:21:10 vinco kernel: [ 0.349694] EDAC MC: Ver: 3.0.0 Feb 20 19:21:10 vinco kernel: [ 0.349694] Registered efivars operations Feb 20 19:21:10 vinco kernel: [ 0.349694] PCI: Using ACPI for IRQ routing Feb 20 19:21:10 vinco kernel: [ 0.349694] PCI: pci_cache_line_size set to 64 bytes Feb 20 19:21:10 vinco kernel: [ 0.349694] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] Feb 20 19:21:10 vinco kernel: [ 0.349694] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] Feb 20 19:21:10 vinco kernel: [ 0.349694] e820: reserve RAM buffer [mem 0xb9755000-0xbbffffff] Feb 20 19:21:10 vinco kernel: [ 0.349694] e820: reserve RAM buffer [mem 0xb9fd5000-0xbbffffff] Feb 20 19:21:10 vinco kernel: [ 0.349694] e820: reserve RAM buffer [mem 0xc98c6000-0xcbffffff] Feb 20 19:21:10 vinco kernel: [ 0.349694] e820: reserve RAM buffer [mem 0xc9e01000-0xcbffffff] Feb 20 19:21:10 vinco kernel: [ 0.349694] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff] Feb 20 19:21:10 vinco kernel: [ 0.349694] e820: reserve RAM buffer [mem 0x42f200000-0x42fffffff] Feb 20 19:21:10 vinco kernel: [ 0.349902] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 Feb 20 19:21:10 vinco kernel: [ 0.349905] hpet0: 8 comparators, 64-bit 14.318180 MHz counter Feb 20 19:21:10 vinco kernel: [ 0.353219] clocksource: Switched to clocksource tsc-early Feb 20 19:21:10 vinco kernel: [ 0.359179] VFS: Disk quotas dquot_6.6.0 Feb 20 19:21:10 vinco kernel: [ 0.359179] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Feb 20 19:21:10 vinco kernel: [ 0.359179] AppArmor: AppArmor Filesystem Enabled Feb 20 19:21:10 vinco kernel: [ 0.359179] pnp: PnP ACPI init Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:01: [io 0x0680-0x069f] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:01: [io 0xffff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:01: [io 0xffff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:01: [io 0xffff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:01: [io 0x1c00-0x1cfe] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:01: [io 0x1d00-0x1dfe] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:01: [io 0x1e00-0x1efe] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:01: [io 0x1f00-0x1ffe] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:01: [io 0x1800-0x18fe] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:01: [io 0x164e-0x164f] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) Feb 20 19:21:10 vinco kernel: [ 0.359179] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:03: [io 0x1854-0x1857] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:04: [io 0x04d0-0x04d1] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:05: [io 0x0240-0x0259] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.359179] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) Feb 20 19:21:10 vinco kernel: [ 0.359179] pnp 00:06: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) Feb 20 19:21:10 vinco kernel: [ 0.359179] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active) Feb 20 19:21:10 vinco kernel: [ 0.360254] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.360255] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.360256] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.360256] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.360257] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.360258] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.360259] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved Feb 20 19:21:10 vinco kernel: [ 0.360260] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.360261] system 00:08: [mem 0xff000000-0xffffffff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.360262] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved Feb 20 19:21:10 vinco kernel: [ 0.360263] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.360264] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved Feb 20 19:21:10 vinco kernel: [ 0.360266] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) Feb 20 19:21:10 vinco kernel: [ 0.360323] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) Feb 20 19:21:10 vinco kernel: [ 0.360538] pnp: PnP ACPI: found 10 devices Feb 20 19:21:10 vinco kernel: [ 0.361314] thermal_sys: Registered thermal governor 'fair_share' Feb 20 19:21:10 vinco kernel: [ 0.361314] thermal_sys: Registered thermal governor 'bang_bang' Feb 20 19:21:10 vinco kernel: [ 0.361315] thermal_sys: Registered thermal governor 'step_wise' Feb 20 19:21:10 vinco kernel: [ 0.361315] thermal_sys: Registered thermal governor 'user_space' Feb 20 19:21:10 vinco kernel: [ 0.365806] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns Feb 20 19:21:10 vinco kernel: [ 0.365828] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 Feb 20 19:21:10 vinco kernel: [ 0.365830] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 Feb 20 19:21:10 vinco kernel: [ 0.365831] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 Feb 20 19:21:10 vinco kernel: [ 0.365836] pci 0000:00:1c.1: BAR 14: assigned [mem 0xcfe00000-0xcfffffff] Feb 20 19:21:10 vinco kernel: [ 0.365839] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf2000000-0xf21fffff 64bit pref] Feb 20 19:21:10 vinco kernel: [ 0.365841] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] Feb 20 19:21:10 vinco kernel: [ 0.365843] pci 0000:00:01.0: PCI bridge to [bus 01] Feb 20 19:21:10 vinco kernel: [ 0.365844] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] Feb 20 19:21:10 vinco kernel: [ 0.365846] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] Feb 20 19:21:10 vinco kernel: [ 0.365847] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] Feb 20 19:21:10 vinco kernel: [ 0.365850] pci 0000:00:1c.0: PCI bridge to [bus 02] Feb 20 19:21:10 vinco kernel: [ 0.365858] pci 0000:00:1c.1: PCI bridge to [bus 03] Feb 20 19:21:10 vinco kernel: [ 0.365860] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] Feb 20 19:21:10 vinco kernel: [ 0.365864] pci 0000:00:1c.1: bridge window [mem 0xcfe00000-0xcfffffff] Feb 20 19:21:10 vinco kernel: [ 0.365866] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf21fffff 64bit pref] Feb 20 19:21:10 vinco kernel: [ 0.365871] pci 0000:00:1c.2: PCI bridge to [bus 04] Feb 20 19:21:10 vinco kernel: [ 0.365875] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff] Feb 20 19:21:10 vinco kernel: [ 0.365881] pci 0000:00:1c.3: PCI bridge to [bus 05] Feb 20 19:21:10 vinco kernel: [ 0.365883] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] Feb 20 19:21:10 vinco kernel: [ 0.365886] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff] Feb 20 19:21:10 vinco kernel: [ 0.365893] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] Feb 20 19:21:10 vinco kernel: [ 0.365894] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] Feb 20 19:21:10 vinco kernel: [ 0.365894] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] Feb 20 19:21:10 vinco kernel: [ 0.365895] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] Feb 20 19:21:10 vinco kernel: [ 0.365896] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] Feb 20 19:21:10 vinco kernel: [ 0.365896] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] Feb 20 19:21:10 vinco kernel: [ 0.365897] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] Feb 20 19:21:10 vinco kernel: [ 0.365898] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff window] Feb 20 19:21:10 vinco kernel: [ 0.365899] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] Feb 20 19:21:10 vinco kernel: [ 0.365899] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] Feb 20 19:21:10 vinco kernel: [ 0.365900] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] Feb 20 19:21:10 vinco kernel: [ 0.365901] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] Feb 20 19:21:10 vinco kernel: [ 0.365902] pci_bus 0000:03: resource 1 [mem 0xcfe00000-0xcfffffff] Feb 20 19:21:10 vinco kernel: [ 0.365902] pci_bus 0000:03: resource 2 [mem 0xf2000000-0xf21fffff 64bit pref] Feb 20 19:21:10 vinco kernel: [ 0.365903] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff] Feb 20 19:21:10 vinco kernel: [ 0.365904] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] Feb 20 19:21:10 vinco kernel: [ 0.365904] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff] Feb 20 19:21:10 vinco kernel: [ 0.365985] NET: Registered protocol family 2 Feb 20 19:21:10 vinco kernel: [ 0.366070] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) Feb 20 19:21:10 vinco kernel: [ 0.366087] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) Feb 20 19:21:10 vinco kernel: [ 0.366188] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) Feb 20 19:21:10 vinco kernel: [ 0.366284] TCP: Hash tables configured (established 131072 bind 65536) Feb 20 19:21:10 vinco kernel: [ 0.366303] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) Feb 20 19:21:10 vinco kernel: [ 0.366329] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) Feb 20 19:21:10 vinco kernel: [ 0.366381] NET: Registered protocol family 1 Feb 20 19:21:10 vinco kernel: [ 0.366384] NET: Registered protocol family 44 Feb 20 19:21:10 vinco kernel: [ 0.366391] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] Feb 20 19:21:10 vinco kernel: [ 0.366766] PCI: CLS 64 bytes, default 64 Feb 20 19:21:10 vinco kernel: [ 0.366790] Trying to unpack rootfs image as initramfs... Feb 20 19:21:10 vinco kernel: [ 0.979201] Freeing initrd memory: 58068K Feb 20 19:21:10 vinco kernel: [ 0.979239] DMAR: No ATSR found Feb 20 19:21:10 vinco kernel: [ 0.979294] DMAR: dmar0: Using Queued invalidation Feb 20 19:21:10 vinco kernel: [ 0.979298] DMAR: dmar1: Using Queued invalidation Feb 20 19:21:10 vinco kernel: [ 1.052071] pci 0000:00:00.0: Adding to iommu group 0 Feb 20 19:21:10 vinco kernel: [ 1.052119] pci 0000:00:01.0: Adding to iommu group 1 Feb 20 19:21:10 vinco kernel: [ 1.056706] pci 0000:00:02.0: Adding to iommu group 2 Feb 20 19:21:10 vinco kernel: [ 1.056753] pci 0000:00:02.0: Using iommu direct mapping Feb 20 19:21:10 vinco kernel: [ 1.056784] pci 0000:00:03.0: Adding to iommu group 3 Feb 20 19:21:10 vinco kernel: [ 1.056840] pci 0000:00:14.0: Adding to iommu group 4 Feb 20 19:21:10 vinco kernel: [ 1.056885] pci 0000:00:16.0: Adding to iommu group 5 Feb 20 19:21:10 vinco kernel: [ 1.056940] pci 0000:00:1a.0: Adding to iommu group 6 Feb 20 19:21:10 vinco kernel: [ 1.056984] pci 0000:00:1b.0: Adding to iommu group 7 Feb 20 19:21:10 vinco kernel: [ 1.057024] pci 0000:00:1c.0: Adding to iommu group 8 Feb 20 19:21:10 vinco kernel: [ 1.057068] pci 0000:00:1c.1: Adding to iommu group 9 Feb 20 19:21:10 vinco kernel: [ 1.057112] pci 0000:00:1c.2: Adding to iommu group 10 Feb 20 19:21:10 vinco kernel: [ 1.057150] pci 0000:00:1c.3: Adding to iommu group 11 Feb 20 19:21:10 vinco kernel: [ 1.057208] pci 0000:00:1d.0: Adding to iommu group 12 Feb 20 19:21:10 vinco kernel: [ 1.058361] pci 0000:00:1f.0: Adding to iommu group 13 Feb 20 19:21:10 vinco kernel: [ 1.058370] pci 0000:00:1f.2: Adding to iommu group 13 Feb 20 19:21:10 vinco kernel: [ 1.058378] pci 0000:00:1f.3: Adding to iommu group 13 Feb 20 19:21:10 vinco kernel: [ 1.058386] pci 0000:01:00.0: Adding to iommu group 1 Feb 20 19:21:10 vinco kernel: [ 1.058431] pci 0000:04:00.0: Adding to iommu group 14 Feb 20 19:21:10 vinco kernel: [ 1.058491] pci 0000:05:00.0: Adding to iommu group 15 Feb 20 19:21:10 vinco kernel: [ 1.058511] pci 0000:05:00.1: Adding to iommu group 15 Feb 20 19:21:10 vinco kernel: [ 1.058548] DMAR: Intel(R) Virtualization Technology for Directed I/O Feb 20 19:21:10 vinco kernel: [ 1.060054] Initialise system trusted keyrings Feb 20 19:21:10 vinco kernel: [ 1.060061] Key type blacklist registered Feb 20 19:21:10 vinco kernel: [ 1.060080] workingset: timestamp_bits=40 max_order=22 bucket_order=0 Feb 20 19:21:10 vinco kernel: [ 1.060917] zbud: loaded Feb 20 19:21:10 vinco kernel: [ 1.061086] Platform Keyring initialized Feb 20 19:21:10 vinco kernel: [ 1.061087] Key type asymmetric registered Feb 20 19:21:10 vinco kernel: [ 1.061088] Asymmetric key parser 'x509' registered Feb 20 19:21:10 vinco kernel: [ 1.061092] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) Feb 20 19:21:10 vinco kernel: [ 1.061117] io scheduler mq-deadline registered Feb 20 19:21:10 vinco kernel: [ 1.061340] pcieport 0000:00:01.0: PME: Signaling with IRQ 26 Feb 20 19:21:10 vinco kernel: [ 1.061460] pcieport 0000:00:1c.0: PME: Signaling with IRQ 27 Feb 20 19:21:10 vinco kernel: [ 1.061597] pcieport 0000:00:1c.1: PME: Signaling with IRQ 28 Feb 20 19:21:10 vinco kernel: [ 1.061614] pcieport 0000:00:1c.1: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ Feb 20 19:21:10 vinco kernel: [ 1.061770] pcieport 0000:00:1c.2: PME: Signaling with IRQ 29 Feb 20 19:21:10 vinco kernel: [ 1.061896] pcieport 0000:00:1c.3: PME: Signaling with IRQ 30 Feb 20 19:21:10 vinco kernel: [ 1.061946] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Feb 20 19:21:10 vinco kernel: [ 1.061956] efifb: probing for efifb Feb 20 19:21:10 vinco kernel: [ 1.061970] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k Feb 20 19:21:10 vinco kernel: [ 1.061971] efifb: mode is 1024x768x32, linelength=4096, pages=1 Feb 20 19:21:10 vinco kernel: [ 1.061971] efifb: scrolling: redraw Feb 20 19:21:10 vinco kernel: [ 1.061972] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Feb 20 19:21:10 vinco kernel: [ 1.062030] Console: switching to colour frame buffer device 128x48 Feb 20 19:21:10 vinco kernel: [ 1.063307] fb0: EFI VGA frame buffer device Feb 20 19:21:10 vinco kernel: [ 1.063313] intel_idle: MWAIT substates: 0x42120 Feb 20 19:21:10 vinco kernel: [ 1.063313] intel_idle: v0.4.1 model 0x3C Feb 20 19:21:10 vinco kernel: [ 1.063529] intel_idle: lapic_timer_reliable_states 0xffffffff Feb 20 19:21:10 vinco kernel: [ 1.064261] thermal LNXTHERM:00: registered as thermal_zone0 Feb 20 19:21:10 vinco kernel: [ 1.064261] ACPI: Thermal Zone [THRM] (56 C) Feb 20 19:21:10 vinco kernel: [ 1.064336] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Feb 20 19:21:10 vinco kernel: [ 1.064651] Linux agpgart interface v0.103 Feb 20 19:21:10 vinco kernel: [ 1.064684] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel Feb 20 19:21:10 vinco kernel: [ 1.064684] AMD-Vi: AMD IOMMUv2 functionality not available on this system Feb 20 19:21:10 vinco kernel: [ 1.065133] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 Feb 20 19:21:10 vinco kernel: [ 1.067834] i8042: Detected active multiplexing controller, rev 1.1 Feb 20 19:21:10 vinco kernel: [ 1.070393] serio: i8042 KBD port at 0x60,0x64 irq 1 Feb 20 19:21:10 vinco kernel: [ 1.070395] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Feb 20 19:21:10 vinco kernel: [ 1.070410] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Feb 20 19:21:10 vinco kernel: [ 1.070421] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Feb 20 19:21:10 vinco kernel: [ 1.070431] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Feb 20 19:21:10 vinco kernel: [ 1.070485] mousedev: PS/2 mouse device common for all mice Feb 20 19:21:10 vinco kernel: [ 1.070514] rtc_cmos 00:02: RTC can wake from S4 Feb 20 19:21:10 vinco kernel: [ 1.070650] rtc_cmos 00:02: registered as rtc0 Feb 20 19:21:10 vinco kernel: [ 1.070660] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Feb 20 19:21:10 vinco kernel: [ 1.070667] intel_pstate: Intel P-state driver initializing Feb 20 19:21:10 vinco kernel: [ 1.071326] ledtrig-cpu: registered to indicate activity on CPUs Feb 20 19:21:10 vinco kernel: [ 1.071638] drop_monitor: Initializing network drop monitor service Feb 20 19:21:10 vinco kernel: [ 1.072046] NET: Registered protocol family 10 Feb 20 19:21:10 vinco kernel: [ 1.091568] Segment Routing with IPv6 Feb 20 19:21:10 vinco kernel: [ 1.091590] mip6: Mobile IPv6 Feb 20 19:21:10 vinco kernel: [ 1.091592] NET: Registered protocol family 17 Feb 20 19:21:10 vinco kernel: [ 1.091741] mpls_gso: MPLS GSO support Feb 20 19:21:10 vinco kernel: [ 1.092258] microcode: sig=0x306c3, pf=0x20, revision=0x27 Feb 20 19:21:10 vinco kernel: [ 1.092352] microcode: Microcode Update Driver: v2.2. Feb 20 19:21:10 vinco kernel: [ 1.092356] IPI shorthand broadcast: enabled Feb 20 19:21:10 vinco kernel: [ 1.092363] sched_clock: Marking stable (1092004421, 195325)->(1098656859, -6457113) Feb 20 19:21:10 vinco kernel: [ 1.092471] registered taskstats version 1 Feb 20 19:21:10 vinco kernel: [ 1.092471] Loading compiled-in X.509 certificates Feb 20 19:21:10 vinco kernel: [ 1.110685] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Feb 20 19:21:10 vinco kernel: [ 1.125584] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' Feb 20 19:21:10 vinco kernel: [ 1.125596] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' Feb 20 19:21:10 vinco kernel: [ 1.125611] zswap: loaded using pool lzo/zbud Feb 20 19:21:10 vinco kernel: [ 1.125777] Key type ._fscrypt registered Feb 20 19:21:10 vinco kernel: [ 1.125778] Key type .fscrypt registered Feb 20 19:21:10 vinco kernel: [ 1.125787] AppArmor: AppArmor sha1 policy hashing enabled Feb 20 19:21:10 vinco kernel: [ 1.125986] integrity: Loading X.509 certificate: UEFI:db Feb 20 19:21:10 vinco kernel: [ 1.126181] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' Feb 20 19:21:10 vinco kernel: [ 1.126181] integrity: Loading X.509 certificate: UEFI:db Feb 20 19:21:10 vinco kernel: [ 1.126372] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' Feb 20 19:21:10 vinco kernel: [ 1.126372] integrity: Loading X.509 certificate: UEFI:db Feb 20 19:21:10 vinco kernel: [ 1.126389] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' Feb 20 19:21:10 vinco kernel: [ 1.126390] integrity: Loading X.509 certificate: UEFI:db Feb 20 19:21:10 vinco kernel: [ 1.126404] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' Feb 20 19:21:10 vinco kernel: [ 1.126404] integrity: Loading X.509 certificate: UEFI:db Feb 20 19:21:10 vinco kernel: [ 1.126595] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' Feb 20 19:21:10 vinco kernel: [ 1.127213] rtc_cmos 00:02: setting system clock to 2020-02-20T17:21:06 UTC (1582219266) Feb 20 19:21:10 vinco kernel: [ 1.127872] Freeing unused kernel image memory: 1672K Feb 20 19:21:10 vinco kernel: [ 1.164311] Write protecting the kernel read-only data: 16384k Feb 20 19:21:10 vinco kernel: [ 1.165125] Freeing unused kernel image memory: 2036K Feb 20 19:21:10 vinco kernel: [ 1.165290] Freeing unused kernel image memory: 360K Feb 20 19:21:10 vinco kernel: [ 1.180057] x86/mm: Checked W+X mappings: passed, no W+X pages found. Feb 20 19:21:10 vinco kernel: [ 1.180058] x86/mm: Checking user space page tables Feb 20 19:21:10 vinco kernel: [ 1.186177] x86/mm: Checked W+X mappings: passed, no W+X pages found. Feb 20 19:21:10 vinco kernel: [ 1.186178] Run /init as init process Feb 20 19:21:10 vinco kernel: [ 1.238391] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4 Feb 20 19:21:10 vinco kernel: [ 1.238416] ACPI: Lid Switch [LID] Feb 20 19:21:10 vinco kernel: [ 1.238470] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 Feb 20 19:21:10 vinco kernel: [ 1.238508] ACPI: Sleep Button [SLPB] Feb 20 19:21:10 vinco kernel: [ 1.238551] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 Feb 20 19:21:10 vinco kernel: [ 1.238584] ACPI: Power Button [PWRF] Feb 20 19:21:10 vinco kernel: [ 1.246740] r8168: loading out-of-tree module taints kernel. Feb 20 19:21:10 vinco kernel: [ 1.246848] r8168: module verification failed: signature and/or required key missing - tainting kernel Feb 20 19:21:10 vinco kernel: [ 1.248057] r8168 Gigabit Ethernet driver 8.048.00-NAPI loaded Feb 20 19:21:10 vinco kernel: [ 1.248922] i801_smbus 0000:00:1f.3: SPD Write Disable is set Feb 20 19:21:10 vinco kernel: [ 1.248961] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt Feb 20 19:21:10 vinco kernel: [ 1.251446] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000184F (\GPIS) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251450] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251454] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Feb 20 19:21:10 vinco kernel: [ 1.251457] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251460] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251463] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251466] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Feb 20 19:21:10 vinco kernel: [ 1.251467] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251469] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251472] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251475] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251478] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Feb 20 19:21:10 vinco kernel: [ 1.251478] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251481] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\GPIO) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251484] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C63 (\GP01) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251486] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-204) Feb 20 19:21:10 vinco kernel: [ 1.251489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Feb 20 19:21:10 vinco kernel: [ 1.251490] lpc_ich: Resource conflict(s) found affecting gpio_ich Feb 20 19:21:10 vinco kernel: [ 1.259793] ACPI: bus type USB registered Feb 20 19:21:10 vinco kernel: [ 1.259810] usbcore: registered new interface driver usbfs Feb 20 19:21:10 vinco kernel: [ 1.259817] usbcore: registered new interface driver hub Feb 20 19:21:10 vinco kernel: [ 1.259849] usbcore: registered new device driver usb Feb 20 19:21:10 vinco kernel: [ 1.261897] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. Feb 20 19:21:10 vinco kernel: [ 1.262929] SCSI subsystem initialized Feb 20 19:21:10 vinco kernel: [ 1.263911] r8168 Copyright (C) 2019 Realtek NIC software team Feb 20 19:21:10 vinco kernel: [ 1.263911] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . Feb 20 19:21:10 vinco kernel: [ 1.263911] This is free software, and you are welcome to redistribute it under certain conditions; see . Feb 20 19:21:10 vinco kernel: [ 1.264350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Feb 20 19:21:10 vinco kernel: [ 1.265216] ehci-pci: EHCI PCI platform driver Feb 20 19:21:10 vinco kernel: [ 1.266411] ehci-pci 0000:00:1a.0: EHCI Host Controller Feb 20 19:21:10 vinco kernel: [ 1.266416] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 Feb 20 19:21:10 vinco kernel: [ 1.266428] ehci-pci 0000:00:1a.0: debug port 2 Feb 20 19:21:10 vinco kernel: [ 1.270348] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported Feb 20 19:21:10 vinco kernel: [ 1.270381] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000 Feb 20 19:21:10 vinco kernel: [ 1.276745] libata version 3.00 loaded. Feb 20 19:21:10 vinco kernel: [ 1.280523] r8168 0000:05:00.1 enp5s0f1: renamed from eth0 Feb 20 19:21:10 vinco kernel: [ 1.282086] ahci 0000:00:1f.2: version 3.0 Feb 20 19:21:10 vinco kernel: [ 1.282252] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode Feb 20 19:21:10 vinco kernel: [ 1.282255] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst Feb 20 19:21:10 vinco kernel: [ 1.284210] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 Feb 20 19:21:10 vinco kernel: [ 1.284264] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 Feb 20 19:21:10 vinco kernel: [ 1.284265] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 20 19:21:10 vinco kernel: [ 1.284266] usb usb1: Product: EHCI Host Controller Feb 20 19:21:10 vinco kernel: [ 1.284267] usb usb1: Manufacturer: Linux 5.4.0-4-amd64 ehci_hcd Feb 20 19:21:10 vinco kernel: [ 1.284267] usb usb1: SerialNumber: 0000:00:1a.0 Feb 20 19:21:10 vinco kernel: [ 1.284356] hub 1-0:1.0: USB hub found Feb 20 19:21:10 vinco kernel: [ 1.284364] hub 1-0:1.0: 2 ports detected Feb 20 19:21:10 vinco kernel: [ 1.284464] xhci_hcd 0000:00:14.0: xHCI Host Controller Feb 20 19:21:10 vinco kernel: [ 1.284468] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 Feb 20 19:21:10 vinco kernel: [ 1.285544] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 Feb 20 19:21:10 vinco kernel: [ 1.285550] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported Feb 20 19:21:10 vinco kernel: [ 1.285699] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 Feb 20 19:21:10 vinco kernel: [ 1.285700] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 20 19:21:10 vinco kernel: [ 1.285700] usb usb2: Product: xHCI Host Controller Feb 20 19:21:10 vinco kernel: [ 1.285701] usb usb2: Manufacturer: Linux 5.4.0-4-amd64 xhci-hcd Feb 20 19:21:10 vinco kernel: [ 1.285702] usb usb2: SerialNumber: 0000:00:14.0 Feb 20 19:21:10 vinco kernel: [ 1.285800] hub 2-0:1.0: USB hub found Feb 20 19:21:10 vinco kernel: [ 1.285816] hub 2-0:1.0: 14 ports detected Feb 20 19:21:10 vinco kernel: [ 1.288300] ehci-pci 0000:00:1d.0: EHCI Host Controller Feb 20 19:21:10 vinco kernel: [ 1.288305] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 Feb 20 19:21:10 vinco kernel: [ 1.288316] ehci-pci 0000:00:1d.0: debug port 2 Feb 20 19:21:10 vinco kernel: [ 1.288317] xhci_hcd 0000:00:14.0: xHCI Host Controller Feb 20 19:21:10 vinco kernel: [ 1.288320] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 Feb 20 19:21:10 vinco kernel: [ 1.288322] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed Feb 20 19:21:10 vinco kernel: [ 1.288350] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 Feb 20 19:21:10 vinco kernel: [ 1.288350] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 20 19:21:10 vinco kernel: [ 1.288351] usb usb4: Product: xHCI Host Controller Feb 20 19:21:10 vinco kernel: [ 1.288352] usb usb4: Manufacturer: Linux 5.4.0-4-amd64 xhci-hcd Feb 20 19:21:10 vinco kernel: [ 1.288352] usb usb4: SerialNumber: 0000:00:14.0 Feb 20 19:21:10 vinco kernel: [ 1.288424] hub 4-0:1.0: USB hub found Feb 20 19:21:10 vinco kernel: [ 1.288436] hub 4-0:1.0: 4 ports detected Feb 20 19:21:10 vinco kernel: [ 1.292233] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported Feb 20 19:21:10 vinco kernel: [ 1.292245] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000 Feb 20 19:21:10 vinco kernel: [ 1.292663] scsi host0: ahci Feb 20 19:21:10 vinco kernel: [ 1.292802] scsi host1: ahci Feb 20 19:21:10 vinco kernel: [ 1.292892] scsi host2: ahci Feb 20 19:21:10 vinco kernel: [ 1.292965] scsi host3: ahci Feb 20 19:21:10 vinco kernel: [ 1.293019] scsi host4: ahci Feb 20 19:21:10 vinco kernel: [ 1.293044] ata1: DUMMY Feb 20 19:21:10 vinco kernel: [ 1.293045] ata2: DUMMY Feb 20 19:21:10 vinco kernel: [ 1.293047] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 33 Feb 20 19:21:10 vinco kernel: [ 1.293047] ata4: DUMMY Feb 20 19:21:10 vinco kernel: [ 1.293049] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 33 Feb 20 19:21:10 vinco kernel: [ 1.308231] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 Feb 20 19:21:10 vinco kernel: [ 1.308494] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 Feb 20 19:21:10 vinco kernel: [ 1.308496] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Feb 20 19:21:10 vinco kernel: [ 1.308496] usb usb3: Product: EHCI Host Controller Feb 20 19:21:10 vinco kernel: [ 1.308497] usb usb3: Manufacturer: Linux 5.4.0-4-amd64 ehci_hcd Feb 20 19:21:10 vinco kernel: [ 1.308498] usb usb3: SerialNumber: 0000:00:1d.0 Feb 20 19:21:10 vinco kernel: [ 1.308668] hub 3-0:1.0: USB hub found Feb 20 19:21:10 vinco kernel: [ 1.308692] hub 3-0:1.0: 2 ports detected Feb 20 19:21:10 vinco kernel: [ 1.342843] i915 0000:00:02.0: VT-d active for gfx access Feb 20 19:21:10 vinco kernel: [ 1.342845] checking generic (d0000000 300000) vs hw (d0000000 10000000) Feb 20 19:21:10 vinco kernel: [ 1.342846] fb0: switching to inteldrmfb from EFI VGA Feb 20 19:21:10 vinco kernel: [ 1.342895] Console: switching to colour dummy device 80x25 Feb 20 19:21:10 vinco kernel: [ 1.342920] i915 0000:00:02.0: vgaarb: deactivate vga console Feb 20 19:21:10 vinco kernel: [ 1.343131] i915 0000:00:02.0: DMAR active, disabling use of stolen memory Feb 20 19:21:10 vinco kernel: [ 1.343529] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). Feb 20 19:21:10 vinco kernel: [ 1.343530] [drm] Driver supports precise vblank timestamp query. Feb 20 19:21:10 vinco kernel: [ 1.343724] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem Feb 20 19:21:10 vinco kernel: [ 1.357918] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 Feb 20 19:21:10 vinco kernel: [ 1.358658] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS Feb 20 19:21:10 vinco kernel: [ 1.360077] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) Feb 20 19:21:10 vinco kernel: [ 1.362768] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4f/LNXVIDEO:00/input/input9 Feb 20 19:21:10 vinco kernel: [ 1.364078] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Feb 20 19:21:10 vinco kernel: [ 1.366659] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10 Feb 20 19:21:10 vinco kernel: [ 1.376113] fbcon: i915drmfb (fb0) is primary device Feb 20 19:21:10 vinco kernel: [ 1.457552] battery: ACPI: Battery Slot [BAT0] (battery present) Feb 20 19:21:10 vinco kernel: [ 1.607393] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 20 19:21:10 vinco kernel: [ 1.607416] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Feb 20 19:21:10 vinco kernel: [ 1.608258] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded Feb 20 19:21:10 vinco kernel: [ 1.608261] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out Feb 20 19:21:10 vinco kernel: [ 1.608263] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out Feb 20 19:21:10 vinco kernel: [ 1.608640] ata5.00: supports DRM functions and may not be fully accessible Feb 20 19:21:10 vinco kernel: [ 1.609722] ata5.00: disabling queued TRIM support Feb 20 19:21:10 vinco kernel: [ 1.609725] ata5.00: ATA-9: Samsung SSD 850 EVO 1TB, EMT02B6Q, max UDMA/133 Feb 20 19:21:10 vinco kernel: [ 1.609727] ata5.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA Feb 20 19:21:10 vinco kernel: [ 1.610867] ata3.00: ATAPI: TSSTcorp CDDVDW SU-228FB, AS00, max UDMA/100 Feb 20 19:21:10 vinco kernel: [ 1.612519] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded Feb 20 19:21:10 vinco kernel: [ 1.612522] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out Feb 20 19:21:10 vinco kernel: [ 1.612524] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out Feb 20 19:21:10 vinco kernel: [ 1.612893] ata5.00: supports DRM functions and may not be fully accessible Feb 20 19:21:10 vinco kernel: [ 1.613736] ata5.00: disabling queued TRIM support Feb 20 19:21:10 vinco kernel: [ 1.615562] ata5.00: configured for UDMA/133 Feb 20 19:21:10 vinco kernel: [ 1.616037] ata3.00: configured for UDMA/100 Feb 20 19:21:10 vinco kernel: [ 1.620284] usb 1-1: new high-speed USB device number 2 using ehci-pci Feb 20 19:21:10 vinco kernel: [ 1.624287] usb 2-3: new full-speed USB device number 2 using xhci_hcd Feb 20 19:21:10 vinco kernel: [ 1.625260] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SU-228FB AS00 PQ: 0 ANSI: 5 Feb 20 19:21:10 vinco kernel: [ 1.648286] usb 3-1: new high-speed USB device number 2 using ehci-pci Feb 20 19:21:10 vinco kernel: [ 1.649297] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 Feb 20 19:21:10 vinco kernel: [ 1.649299] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Feb 20 19:21:10 vinco kernel: [ 1.649762] hub 1-1:1.0: USB hub found Feb 20 19:21:10 vinco kernel: [ 1.649960] hub 1-1:1.0: 6 ports detected Feb 20 19:21:10 vinco kernel: [ 1.662212] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 Feb 20 19:21:10 vinco kernel: [ 1.677089] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 Feb 20 19:21:10 vinco kernel: [ 1.677092] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Feb 20 19:21:10 vinco kernel: [ 1.677469] hub 3-1:1.0: USB hub found Feb 20 19:21:10 vinco kernel: [ 1.677539] hub 3-1:1.0: 8 ports detected Feb 20 19:21:10 vinco kernel: [ 1.775587] usb 2-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03 Feb 20 19:21:10 vinco kernel: [ 1.775589] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Feb 20 19:21:10 vinco kernel: [ 1.775591] usb 2-3: Product: USB Receiver Feb 20 19:21:10 vinco kernel: [ 1.775592] usb 2-3: Manufacturer: Logitech Feb 20 19:21:10 vinco kernel: [ 1.787487] hidraw: raw HID events driver (C) Jiri Kosina Feb 20 19:21:10 vinco kernel: [ 1.793376] usbcore: registered new interface driver usbhid Feb 20 19:21:10 vinco kernel: [ 1.793377] usbhid: USB HID core driver Feb 20 19:21:10 vinco kernel: [ 1.795277] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C52B.0001/input/input14 Feb 20 19:21:10 vinco kernel: [ 1.852505] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0 Feb 20 19:21:10 vinco kernel: [ 1.852912] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52B.0002/input/input15 Feb 20 19:21:10 vinco kernel: [ 1.853072] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52B.0002/input/input16 Feb 20 19:21:10 vinco kernel: [ 1.904287] usb 2-5: new full-speed USB device number 3 using xhci_hcd Feb 20 19:21:10 vinco kernel: [ 1.912351] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:046D:C52B.0002/input/input17 Feb 20 19:21:10 vinco kernel: [ 1.912537] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1 Feb 20 19:21:10 vinco kernel: [ 1.912920] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2 Feb 20 19:21:10 vinco kernel: [ 2.033731] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x381fa2) Feb 20 19:21:10 vinco kernel: [ 2.045309] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2 Feb 20 19:21:10 vinco kernel: [ 2.051268] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e. Feb 20 19:21:10 vinco kernel: [ 2.053513] usb 2-5: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 Feb 20 19:21:10 vinco kernel: [ 2.053516] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Feb 20 19:21:10 vinco kernel: [ 2.070469] psmouse serio4: elantech: Elan sample query result 05, 1b, 64 Feb 20 19:21:10 vinco kernel: [ 2.080303] tsc: Refined TSC clocksource calibration: 2494.228 MHz Feb 20 19:21:10 vinco kernel: [ 2.080316] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ed6cc7b, max_idle_ns: 440795302954 ns Feb 20 19:21:10 vinco kernel: [ 2.080357] clocksource: Switched to clocksource tsc Feb 20 19:21:10 vinco kernel: [ 2.155270] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13 Feb 20 19:21:10 vinco kernel: [ 2.167416] input: Logitech Unifying Device. Wireless PID:101b Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input19 Feb 20 19:21:10 vinco kernel: [ 2.168253] hid-generic 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-3/input2:1 Feb 20 19:21:10 vinco kernel: [ 2.180251] usb 2-7: new high-speed USB device number 4 using xhci_hcd Feb 20 19:21:10 vinco kernel: [ 2.226413] input: Logitech M705 as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input23 Feb 20 19:21:10 vinco kernel: [ 2.226634] logitech-hidpp-device 0003:046D:101B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-3/input2:1 Feb 20 19:21:10 vinco kernel: [ 2.301552] usb 2-7: New USB device found, idVendor=13d3, idProduct=5188, bcdDevice= 8.14 Feb 20 19:21:10 vinco kernel: [ 2.301555] usb 2-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2 Feb 20 19:21:10 vinco kernel: [ 2.301557] usb 2-7: Product: USB2.0 UVC HD Webcam Feb 20 19:21:10 vinco kernel: [ 2.301559] usb 2-7: Manufacturer: Azurewave Feb 20 19:21:10 vinco kernel: [ 2.301561] usb 2-7: SerialNumber: NULL Feb 20 19:21:10 vinco kernel: [ 2.651337] Console: switching to colour frame buffer device 240x67 Feb 20 19:21:10 vinco kernel: [ 2.678780] i915 0000:00:02.0: fb0: i915drmfb frame buffer device Feb 20 19:21:10 vinco kernel: [ 2.701421] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) Feb 20 19:21:10 vinco kernel: [ 2.701440] sd 4:0:0:0: [sda] Write Protect is off Feb 20 19:21:10 vinco kernel: [ 2.701443] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 20 19:21:10 vinco kernel: [ 2.701470] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 20 19:21:10 vinco kernel: [ 2.719105] sda: sda1 sda2 sda3 sda4 sda6 Feb 20 19:21:10 vinco kernel: [ 2.720366] sd 4:0:0:0: [sda] supports TCG Opal Feb 20 19:21:10 vinco kernel: [ 2.720369] sd 4:0:0:0: [sda] Attached SCSI disk Feb 20 19:21:10 vinco kernel: [ 2.754913] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Feb 20 19:21:10 vinco kernel: [ 2.754916] cdrom: Uniform CD-ROM driver Revision: 3.20 Feb 20 19:21:10 vinco kernel: [ 2.788759] sr 2:0:0:0: Attached scsi CD-ROM sr0 Feb 20 19:21:10 vinco kernel: [ 3.156221] raid6: avx2x4 gen() 31323 MB/s Feb 20 19:21:10 vinco kernel: [ 3.224220] raid6: avx2x4 xor() 20496 MB/s Feb 20 19:21:10 vinco kernel: [ 3.292220] raid6: avx2x2 gen() 28575 MB/s Feb 20 19:21:10 vinco kernel: [ 3.360220] raid6: avx2x2 xor() 17658 MB/s Feb 20 19:21:10 vinco kernel: [ 3.428220] raid6: avx2x1 gen() 24388 MB/s Feb 20 19:21:10 vinco kernel: [ 3.496220] raid6: avx2x1 xor() 16209 MB/s Feb 20 19:21:10 vinco kernel: [ 3.564221] raid6: sse2x4 gen() 17600 MB/s Feb 20 19:21:10 vinco kernel: [ 3.632220] raid6: sse2x4 xor() 10875 MB/s Feb 20 19:21:10 vinco kernel: [ 3.700221] raid6: sse2x2 gen() 14764 MB/s Feb 20 19:21:10 vinco kernel: [ 3.768219] raid6: sse2x2 xor() 9633 MB/s Feb 20 19:21:10 vinco kernel: [ 3.836222] raid6: sse2x1 gen() 12411 MB/s Feb 20 19:21:10 vinco kernel: [ 3.904224] raid6: sse2x1 xor() 8422 MB/s Feb 20 19:21:10 vinco kernel: [ 3.904225] raid6: using algorithm avx2x4 gen() 31323 MB/s Feb 20 19:21:10 vinco kernel: [ 3.904225] raid6: .... xor() 20496 MB/s, rmw enabled Feb 20 19:21:10 vinco kernel: [ 3.904226] raid6: using avx2x2 recovery algorithm Feb 20 19:21:10 vinco kernel: [ 3.909997] xor: automatically using best checksumming function avx Feb 20 19:21:10 vinco kernel: [ 3.951697] Btrfs loaded, crc32c=crc32c-intel Feb 20 19:21:10 vinco kernel: [ 4.116179] PM: Image not found (code -22) Feb 20 19:21:10 vinco kernel: [ 4.199940] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) Feb 20 19:21:10 vinco kernel: [ 4.564921] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro Feb 20 19:21:10 vinco kernel: [ 4.573903] lp: driver loaded but no devices found Feb 20 19:21:10 vinco kernel: [ 4.578084] ppdev: user-space parallel port driver Feb 20 19:21:10 vinco kernel: [ 4.710685] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input24 Feb 20 19:21:10 vinco kernel: [ 4.712168] ACPI: AC Adapter [AC0] (on-line) Feb 20 19:21:10 vinco kernel: [ 4.804457] EDAC ie31200: No ECC support Feb 20 19:21:10 vinco kernel: [ 4.806118] EFI Variables Facility v0.08 2004-May-17 Feb 20 19:21:10 vinco kernel: [ 4.806595] sr 2:0:0:0: Attached scsi generic sg0 type 5 Feb 20 19:21:10 vinco kernel: [ 4.806687] sd 4:0:0:0: Attached scsi generic sg1 type 0 Feb 20 19:21:10 vinco kernel: [ 4.807197] input: PC Speaker as /devices/platform/pcspkr/input/input25 Feb 20 19:21:10 vinco kernel: [ 4.807861] iTCO_vendor_support: vendor-support=0 Feb 20 19:21:10 vinco kernel: [ 4.810605] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 Feb 20 19:21:10 vinco kernel: [ 4.810643] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) Feb 20 19:21:10 vinco kernel: [ 4.812158] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Feb 20 19:21:10 vinco kernel: [ 4.814992] asus_wmi: ASUS WMI generic driver loaded Feb 20 19:21:10 vinco kernel: [ 4.816361] asus_wmi: Initialization: 0x1 Feb 20 19:21:10 vinco kernel: [ 4.816396] asus_wmi: BIOS WMI version: 7.9 Feb 20 19:21:10 vinco kernel: [ 4.816442] asus_wmi: SFUN value: 0x6a0877 Feb 20 19:21:10 vinco kernel: [ 4.816444] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS Feb 20 19:21:10 vinco kernel: [ 4.816446] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue Feb 20 19:21:10 vinco kernel: [ 4.817884] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input26 Feb 20 19:21:10 vinco kernel: [ 4.828773] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer Feb 20 19:21:10 vinco kernel: [ 4.828774] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules Feb 20 19:21:10 vinco kernel: [ 4.828775] RAPL PMU: hw unit of domain package 2^-14 Joules Feb 20 19:21:10 vinco kernel: [ 4.828775] RAPL PMU: hw unit of domain dram 2^-14 Joules Feb 20 19:21:10 vinco kernel: [ 4.828776] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules Feb 20 19:21:10 vinco kernel: [ 4.834469] pstore: Using crash dump compression: deflate Feb 20 19:21:10 vinco kernel: [ 4.839856] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.839938] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.840014] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.840090] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.840166] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.840243] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.840468] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.840677] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.840757] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.840829] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.840904] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.840981] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.841052] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.841125] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.841197] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.841275] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.841633] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.841781] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.842016] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.845879] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.848046] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.848172] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.848395] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.848515] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.848592] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.848670] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.848747] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.848824] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.848896] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.848969] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.849049] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.849128] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.849633] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.849704] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.850886] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.850971] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.851039] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.851608] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.851673] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.851735] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.851799] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.851865] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.851926] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.852750] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.854821] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.854898] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.856146] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.856234] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.857483] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.857564] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.858219] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.858870] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.858948] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.859583] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.859668] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.859742] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.859800] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.859853] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.859906] pstore: crypto_comp_decompress failed, ret = -22! Feb 20 19:21:10 vinco kernel: [ 4.859938] pstore: Registered efi as persistent store backend Feb 20 19:21:10 vinco kernel: [ 4.865564] mc: Linux media interface: v0.10 Feb 20 19:21:10 vinco kernel: [ 4.913726] videodev: Linux video capture interface: v2.00 Feb 20 19:21:10 vinco kernel: [ 4.925068] cryptd: max_cpu_qlen set to 1000 Feb 20 19:21:10 vinco kernel: [ 4.932438] Intel(R) Wireless WiFi driver for Linux Feb 20 19:21:10 vinco kernel: [ 4.932439] Copyright(c) 2003- 2015 Intel Corporation Feb 20 19:21:10 vinco kernel: [ 4.936380] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) Feb 20 19:21:10 vinco kernel: [ 4.937436] AVX2 version of gcm_enc/dec engaged. Feb 20 19:21:10 vinco kernel: [ 4.937437] AES CTR mode by8 optimization enabled Feb 20 19:21:10 vinco kernel: [ 4.940813] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (13d3:5188) Feb 20 19:21:10 vinco kernel: [ 4.944040] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) Feb 20 19:21:10 vinco kernel: [ 4.944508] iwlwifi 0000:04:00.0: firmware: direct-loading firmware iwlwifi-7260-17.ucode Feb 20 19:21:10 vinco kernel: [ 4.944718] iwlwifi 0000:04:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm Feb 20 19:21:10 vinco kernel: [ 4.952173] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not initialized! Feb 20 19:21:10 vinco kernel: [ 4.952175] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not initialized! Feb 20 19:21:10 vinco kernel: [ 4.952176] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized! Feb 20 19:21:10 vinco kernel: [ 4.952268] input: USB2.0 UVC HD Webcam: USB2.0 UV as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input27 Feb 20 19:21:10 vinco kernel: [ 4.952336] usbcore: registered new interface driver uvcvideo Feb 20 19:21:10 vinco kernel: [ 4.952337] USB Video Class driver (1.1.1) Feb 20 19:21:10 vinco kernel: [ 4.985700] Adding 15625212k swap on /dev/sda3. Priority:-2 extents:1 across:15625212k SSFS Feb 20 19:21:10 vinco kernel: [ 4.997813] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem Feb 20 19:21:10 vinco kernel: [ 5.000344] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) Feb 20 19:21:10 vinco kernel: [ 5.025470] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) Feb 20 19:21:10 vinco kernel: [ 5.032670] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input28 Feb 20 19:21:10 vinco kernel: [ 5.032709] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input29 Feb 20 19:21:10 vinco kernel: [ 5.032741] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input30 Feb 20 19:21:10 vinco kernel: [ 5.032774] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input31 Feb 20 19:21:10 vinco kernel: [ 5.032806] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input32 Feb 20 19:21:10 vinco kernel: [ 5.118744] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC668: line_outs=2 (0x14/0x1a/0x0/0x0/0x0) type:speaker Feb 20 19:21:10 vinco kernel: [ 5.118747] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) Feb 20 19:21:10 vinco kernel: [ 5.118759] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) Feb 20 19:21:10 vinco kernel: [ 5.118760] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 Feb 20 19:21:10 vinco kernel: [ 5.118761] snd_hda_codec_realtek hdaudioC1D0: inputs: Feb 20 19:21:10 vinco kernel: [ 5.118762] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x19 Feb 20 19:21:10 vinco kernel: [ 5.118764] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1b Feb 20 19:21:10 vinco kernel: [ 5.118766] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 Feb 20 19:21:10 vinco kernel: [ 5.143037] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input33 Feb 20 19:21:10 vinco kernel: [ 5.145236] Bluetooth: Core ver 2.22 Feb 20 19:21:10 vinco kernel: [ 5.145246] NET: Registered protocol family 31 Feb 20 19:21:10 vinco kernel: [ 5.145246] Bluetooth: HCI device and connection manager initialized Feb 20 19:21:10 vinco kernel: [ 5.145249] Bluetooth: HCI socket layer initialized Feb 20 19:21:10 vinco kernel: [ 5.145250] Bluetooth: L2CAP socket layer initialized Feb 20 19:21:10 vinco kernel: [ 5.145253] Bluetooth: SCO socket layer initialized Feb 20 19:21:10 vinco kernel: [ 5.153748] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144 Feb 20 19:21:10 vinco kernel: [ 5.172059] iwlwifi 0000:04:00.0: base HW address: 48:51:b7:6b:7d:3a Feb 20 19:21:10 vinco kernel: [ 5.185075] audit: type=1400 audit(1582219270.553:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="aatest-nvidia_modprobe" pid=687 comm="apparmor_parser" Feb 20 19:21:10 vinco kernel: [ 5.185261] audit: type=1400 audit(1582219270.553:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=690 comm="apparmor_parser" Feb 20 19:21:10 vinco kernel: [ 5.185264] audit: type=1400 audit(1582219270.553:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=690 comm="apparmor_parser" Feb 20 19:21:10 vinco kernel: [ 5.185425] audit: type=1400 audit(1582219270.553:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="openbazaard2" pid=686 comm="apparmor_parser" Feb 20 19:21:10 vinco kernel: [ 5.185427] audit: type=1400 audit(1582219270.553:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="openbazaard2//ip" pid=686 comm="apparmor_parser" Feb 20 19:21:10 vinco kernel: [ 5.190214] audit: type=1400 audit(1582219270.557:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mdnsd" pid=688 comm="apparmor_parser" Feb 20 19:21:10 vinco kernel: [ 5.272643] usbcore: registered new interface driver btusb Feb 20 19:21:10 vinco kernel: [ 5.297804] Bluetooth: hci0: read Intel version: 3707100180012d0d00 Feb 20 19:21:10 vinco kernel: [ 5.298765] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq Feb 20 19:21:10 vinco kernel: [ 5.298768] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq Feb 20 19:21:10 vinco kernel: [ 5.378534] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Feb 20 19:21:10 vinco kernel: [ 5.381318] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 Feb 20 19:21:10 vinco kernel: [ 5.471226] Bluetooth: hci0: unexpected event for opcode 0xfc2f Feb 20 19:21:10 vinco kernel: [ 5.486213] Bluetooth: hci0: Intel firmware patch completed and activated Feb 20 19:21:10 vinco kernel: [ 5.564715] bbswitch: version 0.8 Feb 20 19:21:10 vinco kernel: [ 5.564721] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 Feb 20 19:21:10 vinco kernel: [ 5.564727] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP Feb 20 19:21:10 vinco kernel: [ 5.564739] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59) Feb 20 19:21:10 vinco kernel: [ 5.564833] bbswitch: detected an Optimus _DSM function Feb 20 19:21:10 vinco kernel: [ 5.564912] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on Feb 20 19:21:10 vinco kernel: [ 5.565565] bbswitch: disabling discrete graphics Feb 20 19:21:10 vinco kernel: [ 5.570239] intel_rapl_common: Found RAPL domain package Feb 20 19:21:10 vinco kernel: [ 5.570241] intel_rapl_common: Found RAPL domain core Feb 20 19:21:10 vinco kernel: [ 5.570241] intel_rapl_common: Found RAPL domain uncore Feb 20 19:21:10 vinco kernel: [ 5.570242] intel_rapl_common: Found RAPL domain dram Feb 20 19:21:10 vinco kernel: [ 5.570245] intel_rapl_common: RAPL package-0 domain package locked by BIOS Feb 20 19:21:10 vinco kernel: [ 5.570249] intel_rapl_common: RAPL package-0 domain dram locked by BIOS Feb 20 19:21:10 vinco kernel: [ 5.577983] IPMI message handler: version 39.2 Feb 20 19:21:10 vinco kernel: [ 5.580068] ipmi device interface Feb 20 19:21:11 vinco kernel: [ 5.629143] nvidia: module license 'NVIDIA' taints kernel. Feb 20 19:21:11 vinco kernel: [ 5.629144] Disabling lock debugging due to kernel taint Feb 20 19:21:11 vinco kernel: [ 5.640210] nvidia-nvlink: Nvlink Core is being initialized, major device number 244 Feb 20 19:21:11 vinco kernel: [ 5.640508] nvidia 0000:01:00.0: Refused to change power state, currently in D3 Feb 20 19:21:11 vinco kernel: [ 5.640608] NVRM: This is a 64-bit BAR mapped above 4GB by the system Feb 20 19:21:11 vinco kernel: [ 5.640608] NVRM: BIOS or the Linux kernel, but the PCI bridge Feb 20 19:21:11 vinco kernel: [ 5.640608] NVRM: immediately upstream of this GPU does not define Feb 20 19:21:11 vinco kernel: [ 5.640608] NVRM: a matching prefetchable memory window. Feb 20 19:21:11 vinco kernel: [ 5.640608] NVRM: This may be due to a known Linux kernel bug. Please Feb 20 19:21:11 vinco kernel: [ 5.640608] NVRM: see the README section on 64-bit BARs for additional Feb 20 19:21:11 vinco kernel: [ 5.640608] NVRM: information. Feb 20 19:21:11 vinco kernel: [ 5.640614] nvidia: probe of 0000:01:00.0 failed with error -1 Feb 20 19:21:11 vinco kernel: [ 5.640634] NVRM: The NVIDIA probe routine failed for 1 device(s). Feb 20 19:21:11 vinco kernel: [ 5.640634] NVRM: None of the NVIDIA graphics adapters were initialized! Feb 20 19:21:11 vinco kernel: [ 5.649176] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Feb 20 19:21:11 vinco kernel: [ 5.649177] Bluetooth: BNEP filters: protocol multicast Feb 20 19:21:11 vinco kernel: [ 5.649180] Bluetooth: BNEP socket layer initialized Feb 20 19:21:11 vinco kernel: [ 5.712407] nvidia-nvlink: Unregistered the Nvlink Core, major device number 244 Feb 20 19:21:11 vinco kernel: [ 5.960180] enp5s0f1: 0xffffc0e740051000, 08:62:66:b3:2e:1c, IRQ 31 Feb 20 19:21:12 vinco kernel: [ 7.087864] broken atomic modeset userspace detected, disabling atomic Feb 20 19:21:14 vinco kernel: [ 9.392232] r8168: enp5s0f1: link up Feb 20 19:21:14 vinco kernel: [ 9.392273] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0f1: link becomes ready Feb 20 19:21:14 vinco kernel: [ 9.427484] PPP generic driver version 2.4.2 Feb 20 19:21:14 vinco kernel: [ 9.428159] NET: Registered protocol family 24 Feb 20 19:21:14 vinco kernel: [ 9.433710] l2tp_core: L2TP core driver, V2.0 Feb 20 19:21:14 vinco kernel: [ 9.435235] l2tp_netlink: L2TP netlink interface Feb 20 19:21:14 vinco kernel: [ 9.436835] l2tp_ppp: PPPoL2TP kernel driver, V2.0 Feb 20 19:21:14 vinco kernel: [ 9.450166] vboxdrv: Found 8 processor cores Feb 20 19:21:14 vinco kernel: [ 9.452361] Initializing XFRM netlink socket Feb 20 19:21:14 vinco kernel: [ 9.468456] vboxdrv: TSC mode is Invariant, tentative frequency 2494226002 Hz Feb 20 19:21:14 vinco kernel: [ 9.468458] vboxdrv: Successfully loaded version 6.1.2_Debian (interface 0x002d0001) Feb 20 19:21:14 vinco kernel: [ 9.478056] VBoxNetFlt: Successfully started. Feb 20 19:21:14 vinco kernel: [ 9.485477] VBoxNetAdp: Successfully started. Feb 20 19:21:20 vinco kernel: [ 15.520313] r8168: enp5s0f1: link down Feb 20 19:21:22 vinco kernel: [ 17.312543] Bluetooth: RFCOMM TTY layer initialized Feb 20 19:21:22 vinco kernel: [ 17.312551] Bluetooth: RFCOMM socket layer initialized Feb 20 19:21:22 vinco kernel: [ 17.312555] Bluetooth: RFCOMM ver 1.11 Feb 20 19:21:24 vinco kernel: [ 18.644190] r8168: enp5s0f1: link up Feb 20 19:21:55 vinco kernel: [ 50.021879] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. Feb 20 19:22:49 vinco kernel: [ 103.860161] logitech-hidpp-device 0003:046D:101B.0004: HID++ 1.0 device connected. Feb 20 19:22:49 vinco kernel: [ 103.970188] logitech-hidpp-device 0003:046D:101B.0004: multiplier = 8 Feb 20 19:23:02 vinco kernel: [ 116.512801] SUPR0GipMap: fGetGipCpu=0x1b Feb 20 19:23:02 vinco kernel: [ 117.269532] vboxdrv: 00000000b709ba0f VMMR0.r0 Feb 20 19:23:02 vinco kernel: [ 117.381615] vboxdrv: 00000000a10569cf VBoxDDR0.r0 Feb 20 19:23:02 vinco kernel: [ 117.426700] vboxdrv: 00000000b6b7684b VBoxEhciR0.r0 Feb 20 19:23:02 vinco kernel: [ 117.429249] VMMR0InitVM: eflags=246 fKernelFeatures=0x4 (SUPKERNELFEATURES_SMAP=0) Feb 20 19:24:54 vinco kernel: [ 228.808802] ------------[ cut here ]------------ Feb 20 19:24:54 vinco kernel: [ 228.808832] NETDEV WATCHDOG: enp5s0f1 (r8168): transmit queue 0 timed out Feb 20 19:24:54 vinco kernel: [ 228.808865] WARNING: CPU: 7 PID: 0 at net/sched/sch_generic.c:447 dev_watchdog+0x248/0x250 Feb 20 19:24:54 vinco kernel: [ 228.808871] Modules linked in: xt_recent ipt_REJECT nf_reject_ipv4 xt_multiport xt_conntrack xt_hashlimit xt_addrtype xt_iface(OE) xt_mark nft_chain_nat xt_comment xt_CT xt_owner xt_tcpudp nft_compat nft_counter xt_NFLOG nf_log_ipv4 nf_log_common xt_LOG nf_nat_tftp nf_nat_snmp_basic nf_conntrack_snmp nf_nat_sip nf_nat_pptp nf_nat_irc nf_nat_h323 nf_nat_ftp nf_nat_amanda ts_kmp nf_conntrack_amanda nf_nat nf_conntrack_sane nf_conntrack_tftp nf_conntrack_sip nf_conntrack_pptp nf_conntrack_netlink nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables rfcomm vboxnetadp(OE) vboxnetflt(OE) xfrm_user xfrm_algo vboxdrv(OE) l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pppox ppp_generic slhc bnep nfnetlink_log nfnetlink ipmi_devintf ipmi_msghandler intel_rapl_msr intel_rapl_common bbswitch(OE) x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass btusb btrtl iwlmvm btbcm Feb 20 19:24:54 vinco kernel: [ 228.808935] binfmt_misc btintel bluetooth crct10dif_pclmul nls_ascii ghash_clmulni_intel mac80211 nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic vfat drbg ledtrig_audio libarc4 snd_hda_codec_hdmi fat uvcvideo aesni_intel iwlwifi videobuf2_vmalloc ansi_cprng crypto_simd videobuf2_memops videobuf2_v4l2 snd_hda_intel cryptd glue_helper snd_intel_nhlt videobuf2_common snd_hda_codec videodev snd_hda_core intel_cstate ecdh_generic ecc cfg80211 mc intel_uncore efi_pstore snd_hwdep snd_pcm snd_timer asus_nb_wmi joydev asus_wmi snd sparse_keymap iTCO_wdt rtsx_pci_ms iTCO_vendor_support pcspkr intel_rapl_perf serio_raw sg efivars soundcore memstick watchdog rfkill ie31200_edac evdev ac asus_wireless parport_pc ppdev lp parport efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs xor zstd_decompress zstd_compress raid6_pq libcrc32c crc32c_generic sr_mod cdrom sd_mod hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid i915 rtsx_pci_sdmmc mmc_core i2c_algo_bit ahci Feb 20 19:24:54 vinco kernel: [ 228.809003] drm_kms_helper libahci xhci_pci crc32_pclmul mxm_wmi libata xhci_hcd drm crc32c_intel ehci_pci ehci_hcd psmouse scsi_mod usbcore rtsx_pci lpc_ich i2c_i801 mfd_core r8168(OE) usb_common video wmi battery button Feb 20 19:24:54 vinco kernel: [ 228.809025] CPU: 7 PID: 0 Comm: swapper/7 Tainted: P OE 5.4.0-4-amd64 #1 Debian 5.4.19-1 Feb 20 19:24:54 vinco kernel: [ 228.809027] Hardware name: ASUSTeK COMPUTER INC. N551JM/N551JM, BIOS N551JM.205 02/13/2015 Feb 20 19:24:54 vinco kernel: [ 228.809034] RIP: 0010:dev_watchdog+0x248/0x250 Feb 20 19:24:54 vinco kernel: [ 228.809038] Code: 85 c0 75 e5 eb 9f 4c 89 ef c6 05 58 1d a8 00 01 e8 0d e4 fa ff 44 89 e1 4c 89 ee 48 c7 c7 f0 cc d2 9a 48 89 c2 e8 76 40 a0 ff <0f> 0b eb 80 0f 1f 40 00 0f 1f 44 00 00 41 57 41 56 49 89 d6 41 55 Feb 20 19:24:54 vinco kernel: [ 228.809040] RSP: 0018:ffffc0e74020ce68 EFLAGS: 00010286 Feb 20 19:24:54 vinco kernel: [ 228.809043] RAX: 0000000000000000 RBX: ffff9f660df8e200 RCX: 000000000000083f Feb 20 19:24:54 vinco kernel: [ 228.809044] RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f Feb 20 19:24:54 vinco kernel: [ 228.809046] RBP: ffff9f660d30045c R08: ffff9f661edd7688 R09: 0000000000000004 Feb 20 19:24:54 vinco kernel: [ 228.809048] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 Feb 20 19:24:54 vinco kernel: [ 228.809049] R13: ffff9f660d300000 R14: ffff9f660d300480 R15: 0000000000000001 Feb 20 19:24:54 vinco kernel: [ 228.809052] FS: 0000000000000000(0000) GS:ffff9f661edc0000(0000) knlGS:0000000000000000 Feb 20 19:24:54 vinco kernel: [ 228.809054] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Feb 20 19:24:54 vinco kernel: [ 228.809055] CR2: 00005f1110bf6da4 CR3: 0000000185e0a001 CR4: 00000000001626e0 Feb 20 19:24:54 vinco kernel: [ 228.809057] Call Trace: Feb 20 19:24:54 vinco kernel: [ 228.809060] Feb 20 19:24:54 vinco kernel: [ 228.809068] ? pfifo_fast_enqueue+0x150/0x150 Feb 20 19:24:54 vinco kernel: [ 228.809073] call_timer_fn+0x2d/0x130 Feb 20 19:24:54 vinco kernel: [ 228.809077] __run_timers.part.0+0x16f/0x260 Feb 20 19:24:54 vinco kernel: [ 228.809084] ? tick_sched_handle+0x22/0x60 Feb 20 19:24:54 vinco kernel: [ 228.809089] ? tick_sched_timer+0x38/0x80 Feb 20 19:24:54 vinco kernel: [ 228.809093] ? tick_sched_do_timer+0x60/0x60 Feb 20 19:24:54 vinco kernel: [ 228.809096] run_timer_softirq+0x26/0x50 Feb 20 19:24:54 vinco kernel: [ 228.809102] __do_softirq+0xe6/0x2e9 Feb 20 19:24:54 vinco kernel: [ 228.809111] irq_exit+0xa6/0xb0 Feb 20 19:24:54 vinco kernel: [ 228.809115] smp_apic_timer_interrupt+0x76/0x130 Feb 20 19:24:54 vinco kernel: [ 228.809118] apic_timer_interrupt+0xf/0x20 Feb 20 19:24:54 vinco kernel: [ 228.809120] Feb 20 19:24:54 vinco kernel: [ 228.809126] RIP: 0010:cpuidle_enter_state+0xc4/0x450 Feb 20 19:24:54 vinco kernel: [ 228.809129] Code: e8 b1 54 ad ff 80 7c 24 0f 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 61 03 00 00 31 ff e8 a3 74 b3 ff fb 66 0f 1f 44 00 00 <45> 85 e4 0f 88 8c 02 00 00 49 63 cc 4c 2b 6c 24 10 48 8d 04 49 48 Feb 20 19:24:54 vinco kernel: [ 228.809131] RSP: 0018:ffffc0e7400cfe68 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 Feb 20 19:24:54 vinco kernel: [ 228.809133] RAX: ffff9f661edea6c0 RBX: ffffffff9aeb92e0 RCX: 000000000000001f Feb 20 19:24:54 vinco kernel: [ 228.809135] RDX: 0000000000000000 RSI: 000000003351882d RDI: 0000000000000000 Feb 20 19:24:54 vinco kernel: [ 228.809137] RBP: ffff9f661edf4a00 R08: 000000354610e2fa R09: 0000000000029fa0 Feb 20 19:24:54 vinco kernel: [ 228.809138] R10: ffff9f661ede95a0 R11: ffff9f661ede9580 R12: 0000000000000005 Feb 20 19:24:54 vinco kernel: [ 228.809140] R13: 000000354610e2fa R14: 0000000000000005 R15: ffff9f661caa8f00 Feb 20 19:24:54 vinco kernel: [ 228.809145] ? cpuidle_enter_state+0x9f/0x450 Feb 20 19:24:54 vinco kernel: [ 228.809149] cpuidle_enter+0x29/0x40 Feb 20 19:24:54 vinco kernel: [ 228.809155] do_idle+0x1dc/0x270 Feb 20 19:24:54 vinco kernel: [ 228.809162] cpu_startup_entry+0x19/0x20 Feb 20 19:24:54 vinco kernel: [ 228.809168] start_secondary+0x15f/0x1b0 Feb 20 19:24:54 vinco kernel: [ 228.809174] secondary_startup_64+0xa4/0xb0 Feb 20 19:24:54 vinco kernel: [ 228.809179] ---[ end trace f2c0113df7c88e86 ]--- Feb 20 19:24:57 vinco kernel: [ 231.448423] r8168: enp5s0f1: link up