netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Palmer Dabbelt <palmer@sifive.com>
To: Nicolas.Ferre@microchip.com
Cc: davem@davemloft.net, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] net: macb: Fix compilation on systems without COMMON_CLK
Date: Mon, 24 Jun 2019 02:57:19 -0700 (PDT)	[thread overview]
Message-ID: <mhng-ac6d3a1f-07a8-40b5-a4ad-93e529ecc206@palmer-si-x1e> (raw)
In-Reply-To: <c440e194-dc93-5a3e-7608-710afade9774@microchip.com>

On Mon, 24 Jun 2019 02:40:21 PDT (-0700), Nicolas.Ferre@microchip.com wrote:
> On 24/06/2019 at 08:16, Palmer Dabbelt wrote:
>> External E-Mail
>> 
>> 
>> The patch to add support for the FU540-C000 added a dependency on
>> COMMON_CLK, but didn't express that via Kconfig.  This fixes the build
>> failure by adding CONFIG_MACB_FU540, which depends on COMMON_CLK and
>> conditionally enables the FU540-C000 support.
> 
> Let's try to limit the use of  #ifdef's throughout the code. We are 
> using them in this driver but only for the hot paths and things that 
> have an impact on performance. I don't think it's the case here: so 
> please find another option => NACK.

OK.  Would you accept adding a Kconfig dependency of the generic MACB driver on
COMMON_CLK, as suggested in the cover letter?

> 
>> I've built this with a powerpc allyesconfig (which pointed out the bug)
>> and on RISC-V, manually checking to ensure the code was built.  I
>> haven't even booted the resulting kernels.
>> 
>> Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000")
>> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
>> ---
>>   drivers/net/ethernet/cadence/Kconfig     | 11 +++++++++++
>>   drivers/net/ethernet/cadence/macb_main.c | 12 ++++++++++++
>>   2 files changed, 23 insertions(+)
>> 
>> diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
>> index 1766697c9c5a..74ee2bfd2369 100644
>> --- a/drivers/net/ethernet/cadence/Kconfig
>> +++ b/drivers/net/ethernet/cadence/Kconfig
>> @@ -40,6 +40,17 @@ config MACB_USE_HWSTAMP
>>   	---help---
>>   	  Enable IEEE 1588 Precision Time Protocol (PTP) support for MACB.
>>   
>> +config MACB_FU540
>> +	bool "Enable support for the SiFive FU540 clock controller"
>> +	depends on MACB && COMMON_CLK
>> +	default y
>> +	---help---
>> +	  Enable support for the MACB/GEM clock controller on the SiFive
>> +	  FU540-C000.  This device is necessary for switching between 10/100
>> +	  and gigabit modes on the FU540-C000 SoC, without which it is only
>> +	  possible to bring up the Ethernet link in whatever mode the
>> +	  bootloader probed.
>> +
>>   config MACB_PCI
>>   	tristate "Cadence PCI MACB/GEM support"
>>   	depends on MACB && PCI && COMMON_CLK
>> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
>> index c545c5b435d8..a903dfdd4183 100644
>> --- a/drivers/net/ethernet/cadence/macb_main.c
>> +++ b/drivers/net/ethernet/cadence/macb_main.c
>> @@ -41,6 +41,7 @@
>>   #include <linux/pm_runtime.h>
>>   #include "macb.h"
>>   
>> +#ifdef CONFIG_MACB_FU540
>>   /* This structure is only used for MACB on SiFive FU540 devices */
>>   struct sifive_fu540_macb_mgmt {
>>   	void __iomem *reg;
>> @@ -49,6 +50,7 @@ struct sifive_fu540_macb_mgmt {
>>   };
>>   
>>   static struct sifive_fu540_macb_mgmt *mgmt;
>> +#endif
>>   
>>   #define MACB_RX_BUFFER_SIZE	128
>>   #define RX_BUFFER_MULTIPLE	64  /* bytes */
>> @@ -3956,6 +3958,7 @@ static int at91ether_init(struct platform_device *pdev)
>>   	return 0;
>>   }
>>   
>> +#ifdef CONFIG_MACB_FU540
>>   static unsigned long fu540_macb_tx_recalc_rate(struct clk_hw *hw,
>>   					       unsigned long parent_rate)
>>   {
>> @@ -4056,7 +4059,9 @@ static int fu540_c000_init(struct platform_device *pdev)
>>   
>>   	return macb_init(pdev);
>>   }
>> +#endif
>>   
>> +#ifdef CONFIG_MACB_FU540
>>   static const struct macb_config fu540_c000_config = {
>>   	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO |
>>   		MACB_CAPS_GEM_HAS_PTP,
>> @@ -4065,6 +4070,7 @@ static const struct macb_config fu540_c000_config = {
>>   	.init = fu540_c000_init,
>>   	.jumbo_max_len = 10240,
>>   };
>> +#endif
>>   
>>   static const struct macb_config at91sam9260_config = {
>>   	.caps = MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII,
>> @@ -4155,7 +4161,9 @@ static const struct of_device_id macb_dt_ids[] = {
>>   	{ .compatible = "cdns,emac", .data = &emac_config },
>>   	{ .compatible = "cdns,zynqmp-gem", .data = &zynqmp_config},
>>   	{ .compatible = "cdns,zynq-gem", .data = &zynq_config },
>> +#ifdef CONFIG_MACB_FU540
>>   	{ .compatible = "sifive,fu540-macb", .data = &fu540_c000_config },
>> +#endif
>>   	{ /* sentinel */ }
>>   };
>>   MODULE_DEVICE_TABLE(of, macb_dt_ids);
>> @@ -4363,7 +4371,9 @@ static int macb_probe(struct platform_device *pdev)
>>   
>>   err_disable_clocks:
>>   	clk_disable_unprepare(tx_clk);
>> +#ifdef CONFIG_MACB_FU540
>>   	clk_unregister(tx_clk);
>> +#endif
>>   	clk_disable_unprepare(hclk);
>>   	clk_disable_unprepare(pclk);
>>   	clk_disable_unprepare(rx_clk);
>> @@ -4398,7 +4408,9 @@ static int macb_remove(struct platform_device *pdev)
>>   		pm_runtime_dont_use_autosuspend(&pdev->dev);
>>   		if (!pm_runtime_suspended(&pdev->dev)) {
>>   			clk_disable_unprepare(bp->tx_clk);
>> +#ifdef CONFIG_MACB_FU540
>>   			clk_unregister(bp->tx_clk);
>> +#endif
>>   			clk_disable_unprepare(bp->hclk);
>>   			clk_disable_unprepare(bp->pclk);
>>   			clk_disable_unprepare(bp->rx_clk);
>> 
> 
> 
> -- 
> Nicolas Ferre

  reply	other threads:[~2019-06-24  9:57 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-24  6:16 net: macb: Fix compilation on systems without COMMON_CLK Palmer Dabbelt
2019-06-24  6:16 ` [PATCH 1/2] " Palmer Dabbelt
2019-06-24  9:40   ` Nicolas.Ferre
2019-06-24  9:57     ` Palmer Dabbelt [this message]
2019-06-24 15:22       ` Nicolas.Ferre
2019-06-25  5:16         ` Harini Katakam
2019-06-24  6:16 ` [PATCH 2/2] net: macb: Kconfig: Rename Atmel to Cadence Palmer Dabbelt
2019-06-24  9:49   ` Nicolas.Ferre
2019-06-24  9:57     ` Palmer Dabbelt
2019-06-24 15:42       ` Nicolas.Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=mhng-ac6d3a1f-07a8-40b5-a4ad-93e529ecc206@palmer-si-x1e \
    --to=palmer@sifive.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).