Netfilter-Devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 0/3] selftests: netfilter: introduce test cases for ipvs
@ 2019-10-05 14:37 Haishuang Yan
  2019-10-05 14:37 ` [PATCH v4 1/3] selftests: netfilter: add ipvs test script Haishuang Yan
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Haishuang Yan @ 2019-10-05 14:37 UTC (permalink / raw)
  To: Shuah Khan, Pablo Neira Ayuso, David S. Miller, Simon Horman
  Cc: Julian Anastasov, linux-kernel, linux-kselftest, lvs-devel,
	netfilter-devel, Haishuang Yan

This series patch include test cases for ipvs.

The test topology is who as below:
+--------------------------------------------------------------+
|                      |                                       |
|         ns0          |         ns1                           |
|      -----------     |     -----------    -----------        |
|      | veth01  | --------- | veth10  |    | veth12  |        |
|      -----------    peer   -----------    -----------        |
|           |          |                        |              |
|      -----------     |                        |              |
|      |  br0    |     |-----------------  peer |--------------|
|      -----------     |                        |              |
|           |          |                        |              |
|      ----------     peer   ----------      -----------       |
|      |  veth02 | --------- |  veth20 |     | veth12  |       |
|      ----------      |     ----------      -----------       |
|                      |         ns2                           |
|                      |                                       |
+--------------------------------------------------------------+

Test results:
# selftests: netfilter: ipvs.sh
# Testing DR mode...
# Testing NAT mode...
# Testing Tunnel mode...
# ipvs.sh: PASS
ok 6 selftests: netfilter: ipvs.sh

Haishuang Yan (3):
  selftests: netfilter: add ipvs test script
  selftests: netfilter: add ipvs nat test case
  selftests: netfilter: add ipvs tunnel test case

 tools/testing/selftests/netfilter/Makefile |   2 +-
 tools/testing/selftests/netfilter/ipvs.sh  | 234 +++++++++++++++++++++++++++++
 2 files changed, 235 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/netfilter/ipvs.sh

-- 
1.8.3.1




^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v4 1/3] selftests: netfilter: add ipvs test script
  2019-10-05 14:37 [PATCH v4 0/3] selftests: netfilter: introduce test cases for ipvs Haishuang Yan
@ 2019-10-05 14:37 ` Haishuang Yan
  2019-10-08  9:42   ` Simon Horman
  2019-10-05 14:37 ` [PATCH v4 2/3] selftests: netfilter: add ipvs nat test case Haishuang Yan
  2019-10-05 14:37 ` [PATCH v4 3/3] selftests: netfilter: add ipvs tunnel " Haishuang Yan
  2 siblings, 1 reply; 5+ messages in thread
From: Haishuang Yan @ 2019-10-05 14:37 UTC (permalink / raw)
  To: Shuah Khan, Pablo Neira Ayuso, David S. Miller, Simon Horman
  Cc: Julian Anastasov, linux-kernel, linux-kselftest, lvs-devel,
	netfilter-devel, Haishuang Yan

Test virutal server via directing routing for IPv4.

Tested:

# selftests: netfilter: ipvs.sh
# Testing DR mode...
# ipvs.sh: PASS
ok 6 selftests: netfilter: ipvs.sh

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
---
v4: use #!/bin/bash -p suggested by Duncan Roe
v3: use bash style
v2: optimize test script
---
 tools/testing/selftests/netfilter/Makefile |   2 +-
 tools/testing/selftests/netfilter/ipvs.sh  | 184 +++++++++++++++++++++++++++++
 2 files changed, 185 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/netfilter/ipvs.sh

diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index 4144984..de1032b 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -2,6 +2,6 @@
 # Makefile for netfilter selftests
 
 TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
-	conntrack_icmp_related.sh nft_flowtable.sh
+	conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
new file mode 100755
index 0000000..f6da1bd
--- /dev/null
+++ b/tools/testing/selftests/netfilter/ipvs.sh
@@ -0,0 +1,184 @@
+#!/bin/bash -p
+# SPDX-License-Identifier: GPL-2.0
+#
+# End-to-end ipvs test suite
+# Topology:
+#--------------------------------------------------------------+
+#                      |                                       |
+#         ns0          |         ns1                           |
+#      -----------     |     -----------    -----------        |
+#      | veth01  | --------- | veth10  |    | veth12  |        |
+#      -----------    peer   -----------    -----------        |
+#           |          |                        |              |
+#      -----------     |                        |              |
+#      |  br0    |     |-----------------  peer |--------------|
+#      -----------     |                        |              |
+#           |          |                        |              |
+#      ----------     peer   ----------      -----------       |
+#      |  veth02 | --------- |  veth20 |     | veth21  |       |
+#      ----------      |     ----------      -----------       |
+#                      |         ns2                           |
+#                      |                                       |
+#--------------------------------------------------------------+
+#
+# We assume that all network driver are loaded
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+GREEN='\033[0;92m'
+RED='\033[0;31m'
+NC='\033[0m' # No Color
+
+readonly port=8080
+
+readonly vip_v4=207.175.44.110
+readonly cip_v4=10.0.0.2
+readonly gip_v4=10.0.0.1
+readonly dip_v4=172.16.0.1
+readonly rip_v4=172.16.0.2
+readonly sip_v4=10.0.0.3
+
+readonly infile="$(mktemp)"
+readonly outfile="$(mktemp)"
+
+sysipvsnet=/proc/sys/net/ipv4/vs/
+if [ ! -d /proc/sys/net/ipv4/vs/ ]; then
+    modprobe -q ip_vs
+    if [ $? -ne 0 ]; then
+        echo "SKIP: Could not run test without ipvs module"
+    	exit $ksft_skip
+    fi
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ipvsadm -v > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not run test without ipvsadm"
+	exit $ksft_skip
+fi
+
+nc --version > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not run test without ncat"
+	exit $ksft_skip
+fi
+
+setup() {
+    ip netns add ns0
+    ip netns add ns1
+    ip netns add ns2
+
+    ip link add veth01 netns ns0 type veth peer name veth10 netns ns1
+    ip link add veth02 netns ns0 type veth peer name veth20 netns ns2
+    ip link add veth12 netns ns1 type veth peer name veth21 netns ns2
+
+    ip netns exec ns0 ip link set veth01 up
+    ip netns exec ns0 ip link set veth02 up
+    ip netns exec ns0 ip link add br0 type bridge
+    ip netns exec ns0 ip link set veth01 master br0
+    ip netns exec ns0 ip link set veth02 master br0
+    ip netns exec ns0 ip link set br0 up
+    ip netns exec ns0 ip addr add ${cip_v4}/24 dev br0
+
+    ip netns exec ns1 ip link set lo up
+    ip netns exec ns1 ip link set veth10 up
+    ip netns exec ns1 ip addr add ${gip_v4}/24 dev veth10
+    ip netns exec ns1 ip link set veth12 up
+    ip netns exec ns1 ip addr add ${dip_v4}/24 dev veth12
+
+    ip netns exec ns2 ip link set lo up
+    ip netns exec ns2 ip link set veth21 up
+    ip netns exec ns2 ip addr add ${rip_v4}/24 dev veth21
+    ip netns exec ns2 ip link set veth20 up
+    ip netns exec ns2 ip addr add ${sip_v4}/24 dev veth20
+}
+
+cleanup() {
+    for i in 0 1 2
+    do
+	ip netns del ns$i > /dev/null 2>&1
+    done
+    pkill nc
+}
+
+server_listen() {
+	ip netns exec ns2 nc -l -p 8080 > "${outfile}" &
+	server_pid=$!
+	sleep 0.2
+}
+
+client_connect() {
+	ip netns exec ns0 timeout 2 nc -w 1 ${vip_v4} ${port} < "${infile}"
+}
+
+verify_data() {
+	wait "${server_pid}"
+	# sha1sum returns two fields [sha1] [filepath]
+	# convert to bash array and access first elem
+	insum=($(sha1sum ${infile}))
+	outsum=($(sha1sum ${outfile}))
+	if [[ "${insum[0]}" != "${outsum[0]}" ]]; then
+		echo "data mismatch"
+		exit 1
+	fi
+}
+
+test_service() {
+    server_listen
+    client_connect
+    ret=$?
+    if [ $ret -ne 0 ]; then
+	return $ret
+    fi
+    verify_data
+}
+
+
+test_dr() {
+    ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
+
+    ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
+    ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
+    ip netns exec ns1 ipvsadm -a -t ${vip_v4}:${port} -r ${rip_v4}:${port}
+    ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
+
+    # avoid incorrect arp response
+    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
+    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
+    # avoid reverse route lookup
+    ip netns exec ns2 sysctl -qw  net.ipv4.conf.all.rp_filter=0
+    ip netns exec ns2 sysctl -qw  net.ipv4.conf.veth21.rp_filter=0
+    ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
+
+    test_service
+}
+
+run_tests() {
+	local errors=
+
+	echo "Testing DR mode..."
+	setup
+	test_dr
+	errors=$(( $errors + $? ))
+
+	return $errors
+}
+
+trap cleanup EXIT
+
+cleanup
+run_tests
+
+if [ $? -ne 0 ]; then
+	echo -e "$(basename $0): ${RED}FAIL${NC}"
+	exit 1
+fi
+echo -e "$(basename $0): ${GREEN}PASS${NC}"
+exit 0
-- 
1.8.3.1




^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v4 2/3] selftests: netfilter: add ipvs nat test case
  2019-10-05 14:37 [PATCH v4 0/3] selftests: netfilter: introduce test cases for ipvs Haishuang Yan
  2019-10-05 14:37 ` [PATCH v4 1/3] selftests: netfilter: add ipvs test script Haishuang Yan
@ 2019-10-05 14:37 ` Haishuang Yan
  2019-10-05 14:37 ` [PATCH v4 3/3] selftests: netfilter: add ipvs tunnel " Haishuang Yan
  2 siblings, 0 replies; 5+ messages in thread
From: Haishuang Yan @ 2019-10-05 14:37 UTC (permalink / raw)
  To: Shuah Khan, Pablo Neira Ayuso, David S. Miller, Simon Horman
  Cc: Julian Anastasov, linux-kernel, linux-kselftest, lvs-devel,
	netfilter-devel, Haishuang Yan

Test virtual server via NAT.

Tested:
# selftests: netfilter: ipvs.sh
# Testing DR mode...
# Testing NAT mode...
# ipvs.sh: PASS

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
---
 tools/testing/selftests/netfilter/ipvs.sh | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
index f6da1bd..2601a7c 100755
--- a/tools/testing/selftests/netfilter/ipvs.sh
+++ b/tools/testing/selftests/netfilter/ipvs.sh
@@ -160,20 +160,40 @@ test_dr() {
     test_service
 }
 
+test_nat() {
+    ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
+
+    ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
+    ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
+    ip netns exec ns1 ipvsadm -a -m -t ${vip_v4}:${port} -r ${rip_v4}:${port}
+    ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
+
+    ip netns exec ns2 ip link del veth20
+    ip netns exec ns2 ip route add default via ${dip_v4} dev veth21
+
+    test_service
+}
+
 run_tests() {
 	local errors=
 
 	echo "Testing DR mode..."
+	cleanup
 	setup
 	test_dr
 	errors=$(( $errors + $? ))
 
+	echo "Testing NAT mode..."
+	cleanup
+	setup
+	test_nat
+	errors=$(( $errors + $? ))
+
 	return $errors
 }
 
 trap cleanup EXIT
 
-cleanup
 run_tests
 
 if [ $? -ne 0 ]; then
-- 
1.8.3.1




^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v4 3/3] selftests: netfilter: add ipvs tunnel test case
  2019-10-05 14:37 [PATCH v4 0/3] selftests: netfilter: introduce test cases for ipvs Haishuang Yan
  2019-10-05 14:37 ` [PATCH v4 1/3] selftests: netfilter: add ipvs test script Haishuang Yan
  2019-10-05 14:37 ` [PATCH v4 2/3] selftests: netfilter: add ipvs nat test case Haishuang Yan
@ 2019-10-05 14:37 ` " Haishuang Yan
  2 siblings, 0 replies; 5+ messages in thread
From: Haishuang Yan @ 2019-10-05 14:37 UTC (permalink / raw)
  To: Shuah Khan, Pablo Neira Ayuso, David S. Miller, Simon Horman
  Cc: Julian Anastasov, linux-kernel, linux-kselftest, lvs-devel,
	netfilter-devel, Haishuang Yan

Test virtual server via ipip tunnel.

Tested:
# selftests: netfilter: ipvs.sh
# Testing DR mode...
# Testing NAT mode...
# Testing Tunnel mode...
# ipvs.sh: PASS
ok 6 selftests: netfilter: ipvs.sh

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
---
v2: optimize test script
---
 tools/testing/selftests/netfilter/ipvs.sh | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
index 2601a7c..48647ae 100755
--- a/tools/testing/selftests/netfilter/ipvs.sh
+++ b/tools/testing/selftests/netfilter/ipvs.sh
@@ -174,6 +174,30 @@ test_nat() {
     test_service
 }
 
+test_tun() {
+    ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
+
+    ip netns exec ns1 modprobe ipip
+    ip netns exec ns1 ip link set tunl0 up
+    ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=0
+    ip netns exec ns1 sysctl -qw net.ipv4.conf.all.send_redirects=0
+    ip netns exec ns1 sysctl -qw net.ipv4.conf.default.send_redirects=0
+    ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
+    ip netns exec ns1 ipvsadm -a -i -t ${vip_v4}:${port} -r ${rip_v4}:${port}
+    ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
+
+    ip netns exec ns2 modprobe ipip
+    ip netns exec ns2 ip link set tunl0 up
+    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
+    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
+    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=0
+    ip netns exec ns2 sysctl -qw net.ipv4.conf.tunl0.rp_filter=0
+    ip netns exec ns2 sysctl -qw net.ipv4.conf.veth21.rp_filter=0
+    ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
+
+    test_service
+}
+
 run_tests() {
 	local errors=
 
@@ -189,6 +213,12 @@ run_tests() {
 	test_nat
 	errors=$(( $errors + $? ))
 
+	echo "Testing Tunnel mode..."
+	cleanup
+	setup
+	test_tun
+	errors=$(( $errors + $? ))
+
 	return $errors
 }
 
-- 
1.8.3.1




^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v4 1/3] selftests: netfilter: add ipvs test script
  2019-10-05 14:37 ` [PATCH v4 1/3] selftests: netfilter: add ipvs test script Haishuang Yan
@ 2019-10-08  9:42   ` Simon Horman
  0 siblings, 0 replies; 5+ messages in thread
From: Simon Horman @ 2019-10-08  9:42 UTC (permalink / raw)
  To: Haishuang Yan
  Cc: Shuah Khan, Pablo Neira Ayuso, David S. Miller, Julian Anastasov,
	linux-kernel, linux-kselftest, lvs-devel, netfilter-devel

On Sat, Oct 05, 2019 at 10:37:43PM +0800, Haishuang Yan wrote:
> Test virutal server via directing routing for IPv4.
> 
> Tested:
> 
> # selftests: netfilter: ipvs.sh
> # Testing DR mode...
> # ipvs.sh: PASS
> ok 6 selftests: netfilter: ipvs.sh
> 
> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
> ---
> v4: use #!/bin/bash -p suggested by Duncan Roe
> v3: use bash style
> v2: optimize test script
> ---
>  tools/testing/selftests/netfilter/Makefile |   2 +-
>  tools/testing/selftests/netfilter/ipvs.sh  | 184 +++++++++++++++++++++++++++++
>  2 files changed, 185 insertions(+), 1 deletion(-)
>  create mode 100755 tools/testing/selftests/netfilter/ipvs.sh
> 
> diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
> index 4144984..de1032b 100644
> --- a/tools/testing/selftests/netfilter/Makefile
> +++ b/tools/testing/selftests/netfilter/Makefile
> @@ -2,6 +2,6 @@
>  # Makefile for netfilter selftests
>  
>  TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
> -	conntrack_icmp_related.sh nft_flowtable.sh
> +	conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh
>  
>  include ../lib.mk
> diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
> new file mode 100755
> index 0000000..f6da1bd
> --- /dev/null
> +++ b/tools/testing/selftests/netfilter/ipvs.sh
> @@ -0,0 +1,184 @@
> +#!/bin/bash -p
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# End-to-end ipvs test suite
> +# Topology:
> +#--------------------------------------------------------------+
> +#                      |                                       |
> +#         ns0          |         ns1                           |
> +#      -----------     |     -----------    -----------        |
> +#      | veth01  | --------- | veth10  |    | veth12  |        |
> +#      -----------    peer   -----------    -----------        |
> +#           |          |                        |              |
> +#      -----------     |                        |              |
> +#      |  br0    |     |-----------------  peer |--------------|
> +#      -----------     |                        |              |
> +#           |          |                        |              |
> +#      ----------     peer   ----------      -----------       |
> +#      |  veth02 | --------- |  veth20 |     | veth21  |       |
> +#      ----------      |     ----------      -----------       |
> +#                      |         ns2                           |
> +#                      |                                       |
> +#--------------------------------------------------------------+
> +#
> +# We assume that all network driver are loaded
> +#
> +
> +# Kselftest framework requirement - SKIP code is 4.
> +ksft_skip=4
> +ret=0
> +GREEN='\033[0;92m'
> +RED='\033[0;31m'
> +NC='\033[0m' # No Color
> +
> +readonly port=8080
> +
> +readonly vip_v4=207.175.44.110
> +readonly cip_v4=10.0.0.2
> +readonly gip_v4=10.0.0.1
> +readonly dip_v4=172.16.0.1
> +readonly rip_v4=172.16.0.2
> +readonly sip_v4=10.0.0.3
> +
> +readonly infile="$(mktemp)"
> +readonly outfile="$(mktemp)"
> +
> +sysipvsnet=/proc/sys/net/ipv4/vs/
> +if [ ! -d /proc/sys/net/ipv4/vs/ ]; then
> +    modprobe -q ip_vs
> +    if [ $? -ne 0 ]; then
> +        echo "SKIP: Could not run test without ipvs module"
> +    	exit $ksft_skip

There are some leading spaces before the tab on the line above.


> +    fi
> +fi
> +
> +ip -Version > /dev/null 2>&1
> +if [ $? -ne 0 ]; then
> +	echo "SKIP: Could not run test without ip tool"
> +	exit $ksft_skip
> +fi
> +
> +ipvsadm -v > /dev/null 2>&1
> +if [ $? -ne 0 ]; then
> +	echo "SKIP: Could not run test without ipvsadm"
> +	exit $ksft_skip
> +fi
> +
> +nc --version > /dev/null 2>&1
> +if [ $? -ne 0 ]; then
> +	echo "SKIP: Could not run test without ncat"
> +	exit $ksft_skip
> +fi
> +
> +setup() {
> +    ip netns add ns0
> +    ip netns add ns1
> +    ip netns add ns2
> +
> +    ip link add veth01 netns ns0 type veth peer name veth10 netns ns1
> +    ip link add veth02 netns ns0 type veth peer name veth20 netns ns2
> +    ip link add veth12 netns ns1 type veth peer name veth21 netns ns2
> +
> +    ip netns exec ns0 ip link set veth01 up
> +    ip netns exec ns0 ip link set veth02 up
> +    ip netns exec ns0 ip link add br0 type bridge
> +    ip netns exec ns0 ip link set veth01 master br0
> +    ip netns exec ns0 ip link set veth02 master br0
> +    ip netns exec ns0 ip link set br0 up
> +    ip netns exec ns0 ip addr add ${cip_v4}/24 dev br0
> +
> +    ip netns exec ns1 ip link set lo up
> +    ip netns exec ns1 ip link set veth10 up
> +    ip netns exec ns1 ip addr add ${gip_v4}/24 dev veth10
> +    ip netns exec ns1 ip link set veth12 up
> +    ip netns exec ns1 ip addr add ${dip_v4}/24 dev veth12
> +
> +    ip netns exec ns2 ip link set lo up
> +    ip netns exec ns2 ip link set veth21 up
> +    ip netns exec ns2 ip addr add ${rip_v4}/24 dev veth21
> +    ip netns exec ns2 ip link set veth20 up
> +    ip netns exec ns2 ip addr add ${sip_v4}/24 dev veth20
> +}
> +
> +cleanup() {
> +    for i in 0 1 2
> +    do
> +	ip netns del ns$i > /dev/null 2>&1
> +    done
> +    pkill nc
> +}
> +
> +server_listen() {
> +	ip netns exec ns2 nc -l -p 8080 > "${outfile}" &
> +	server_pid=$!
> +	sleep 0.2
> +}
> +
> +client_connect() {
> +	ip netns exec ns0 timeout 2 nc -w 1 ${vip_v4} ${port} < "${infile}"
> +}
> +
> +verify_data() {
> +	wait "${server_pid}"
> +	# sha1sum returns two fields [sha1] [filepath]
> +	# convert to bash array and access first elem
> +	insum=($(sha1sum ${infile}))
> +	outsum=($(sha1sum ${outfile}))
> +	if [[ "${insum[0]}" != "${outsum[0]}" ]]; then
> +		echo "data mismatch"
> +		exit 1
> +	fi

I believe that the above code contains the only bashisms.
I'm wondering if we could consider changing it and using #!/bin/sh.

The following appears to work when /bin/sh is dash.

	wait "${server_pid}"
	if ! cmp "$infile" "$outfile"; then
		echo "data mismatch"
		exit 1
	fi

> +}
> +
> +test_service() {
> +    server_listen
> +    client_connect
> +    ret=$?
> +    if [ $ret -ne 0 ]; then
> +	return $ret
> +    fi
> +    verify_data
> +}
> +
> +
> +test_dr() {
> +    ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
> +
> +    ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
> +    ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
> +    ip netns exec ns1 ipvsadm -a -t ${vip_v4}:${port} -r ${rip_v4}:${port}
> +    ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
> +
> +    # avoid incorrect arp response
> +    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
> +    ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
> +    # avoid reverse route lookup
> +    ip netns exec ns2 sysctl -qw  net.ipv4.conf.all.rp_filter=0
> +    ip netns exec ns2 sysctl -qw  net.ipv4.conf.veth21.rp_filter=0
> +    ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
> +
> +    test_service
> +}
> +
> +run_tests() {
> +	local errors=
> +
> +	echo "Testing DR mode..."
> +	setup
> +	test_dr
> +	errors=$(( $errors + $? ))
> +
> +	return $errors
> +}
> +
> +trap cleanup EXIT
> +
> +cleanup
> +run_tests
> +
> +if [ $? -ne 0 ]; then
> +	echo -e "$(basename $0): ${RED}FAIL${NC}"
> +	exit 1
> +fi
> +echo -e "$(basename $0): ${GREEN}PASS${NC}"
> +exit 0
> -- 
> 1.8.3.1
> 
> 
> 

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-05 14:37 [PATCH v4 0/3] selftests: netfilter: introduce test cases for ipvs Haishuang Yan
2019-10-05 14:37 ` [PATCH v4 1/3] selftests: netfilter: add ipvs test script Haishuang Yan
2019-10-08  9:42   ` Simon Horman
2019-10-05 14:37 ` [PATCH v4 2/3] selftests: netfilter: add ipvs nat test case Haishuang Yan
2019-10-05 14:37 ` [PATCH v4 3/3] selftests: netfilter: add ipvs tunnel " Haishuang Yan

Netfilter-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netfilter-devel/0 netfilter-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netfilter-devel netfilter-devel/ https://lore.kernel.org/netfilter-devel \
		netfilter-devel@vger.kernel.org netfilter-devel@archiver.kernel.org
	public-inbox-index netfilter-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netfilter-devel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox