netfilter-devel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pablo Neira Ayuso <pablo@netfilter.org>
To: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" 
	<linux-kselftest@vger.kernel.org>,
	netfilter-devel@vger.kernel.org, Netdev <netdev@vger.kernel.org>,
	lkft-triage@lists.linaro.org, Florian Westphal <fw@strlen.de>,
	fabf@skynet.be, Shuah Khan <shuah@kernel.org>,
	Kees Cook <keescook@chromium.org>,
	Anders Roxell <anders.roxell@linaro.org>
Subject: Re: selftests: netfilter: nft_nat.sh: /dev/stdin:2:9-15: Error: syntax error, unexpected counter
Date: Wed, 14 Oct 2020 21:30:34 +0200	[thread overview]
Message-ID: <20201014193034.GA14337@salvia> (raw)
In-Reply-To: <CA+G9fYv=zPRGCKyhi9DeUsvyb6ZLVVXdV3hW+15XnQN2R3ircQ@mail.gmail.com>

On Wed, Oct 14, 2020 at 05:19:33PM +0530, Naresh Kamboju wrote:
> While running kselftest netfilter test on x86_64 devices linux next
> tag 20201013 kernel
> these errors are noticed. This not specific to kernel version we have
> noticed these errors
> earlier also.
> 
> Am I missing configs ?

What nftables version are you using?

> Please refer to the config file we are using.
> We are using the minimal busybox shell.
> BusyBox v1.27.2 (2020-07-17 18:42:50 UTC) multi-call binary.
> 
> metadata:
>   git branch: master
>   git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
>   git commit: f2fb1afc57304f9dd68c20a08270e287470af2eb
>   git describe: next-20201013
>   make_kernelversion: 5.9.0
>   kernel-config:
> http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/intel-corei7-64/lkft/linux-next/879/config
> 
> Test output log:
> --------------------
> selftests: netfilter: nft_nat.sh
> [ 1207.251385] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1207.342479] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
> # /dev/stdin:2:9-15: Error: syntax error, unexpected counter
> # counter ns0in {}
> #         ^^^^^^^
> # /dev/stdin:3:9-15: Error: syntax error, unexpected counter
> # counter ns1in {}
> #         ^^^^^^^
> # /dev/stdin:4:9-15: Error: syntax error, unexpected counter
> # counter ns2in {}
> #         ^^^^^^^
> # /dev/stdin:6:9-15: Error: syntax error, unexpected counter
> # counter ns0out {}
> #         ^^^^^^^
> 
> <trim>
> 
> # /dev/stdin:12:9-15: Error: syntax error, unexpected counter
> # counter ns2in6 {}
> #         ^^^^^^^
> # /dev/stdin:14:9-15: Error: syntax error, unexpected counter
> # counter ns0out6 {}
> #         ^^^^^^^
> [ 1208.229989] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns0in
> #      ^^^^^^^
> # ERROR: ns0in counter in ns1-loU9Vlmj has unexpected value (expected
> packets 1 bytes 84) at check_counters 1
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns0in
> #      ^^^^^^^
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns0out
> #      ^^^^^^^
> # ERROR: ns0out counter in ns1-loU9Vlmj has unexpected value (expected
> packets 1 bytes 84) at check_counters 2
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns0out
> #      ^^^^^^^
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns0in6
> 
> # ERROR: ns1 counter in ns0-loU9Vlmj has unexpected value (expected
> packets 1 bytes 104) at check_ns0_counters 5
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter ns1
> #      ^^^^^^^
> 
> <trim>
> 
> # <cmdline>:1:16-19: Error: syntax error, unexpected inet
> # reset counters inet
> #                ^^^^
> # <cmdline>:1:16-19: Error: syntax error, unexpected inet
> # reset counters inet
> #                ^^^^
> # FAIL: nftables v0.7 (Scrooge McDuck)
> not ok 2 selftests: netfilter: nft_nat.sh # exit=1
> # selftests: netfilter: bridge_brouter.sh
> # SKIP: Could not run test without ebtables
> ok 3 selftests: netfilter: bridge_brouter.sh # SKIP
> # selftests: netfilter: conntrack_icmp_related.sh
> [ 1215.679815] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1215.698932] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1215.711612] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1216.678043] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter unknown
> #      ^^^^^^^
> # ERROR: counter unknown in nsclient1 has unexpected value (expected
> packets 0 bytes 0)
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter unknown
> #      ^^^^^^^
> 
> <trim>
> 
> # ERROR: counter related in nsclient1 has unexpected value (expected
> packets 2 bytes 1856)
> # <cmdline>:1:6-12: Error: syntax error, unexpected counter
> # list counter inet filter related
> #      ^^^^^^^
> # ERROR: icmp error RELATED state test has failed
> not ok 4 selftests: netfilter: conntrack_icmp_related.sh # exit=1
> # selftests: netfilter: nft_flowtable.sh
> # Cannot create namespace file \"/var/run/netns/ns1\": File exists
> [ 1230.570705] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1230.757525] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1230.843221] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # PASS: netns routing/connectivity: ns1 can reach ns2
> # BusyBox v1.27.2 (2020-07-17 18:42:50 UTC) multi-call binary.
> #
> # Usage: nc [IPADDR PORT]
> # BusyBox v1.27.2 (2020-07-17 18:42:50 UTC) multi-call binary.
> #
> # Usage: nc [IPADDR PORT]
> # FAIL: file mismatch for ns1 -> ns2
> # -rw------- 1 root root 1079296 Oct 13 09:54 /tmp/tmp.EyNCJDBncG
> # -rw------- 1 root root 0 Oct 13 09:54 /tmp/tmp.CR5cdEqIHB
> # FAIL: file mismatch for ns1 <- ns2
> # -rw------- 1 root root 4677632 Oct 13 09:54 /tmp/tmp.NkSMo4ZijB
> # -rw------- 1 root root 0 Oct 13 09:54 /tmp/tmp.irBE9wPUAV
> # FAIL: flow offload for ns1/ns2:
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # BusyBox v1.27.2 (2020-07-17 18:42:50 UTC) multi-call binary.
> #
> # Usage: nc [IPADDR PORT]
> # BusyBox v1.27.2 (2020-07-17 18:42:50 UTC) multi-call binary.
> #
> # Usage: nc [IPADDR PORT]
> # FAIL: file mismatch for ns1 -> ns2
> # -rw------- 1 root root 1079296 Oct 13 09:54 /tmp/tmp.EyNCJDBncG
> # -rw------- 1 root root 0 Oct 13 09:54 /tmp/tmp.CR5cdEqIHB
> # FAIL: file mismatch for ns1 <- ns2
> # -rw------- 1 root root 4677632 Oct 13 09:54 /tmp/tmp.NkSMo4ZijB
> # -rw------- 1 root root 0 Oct 13 09:54 /tmp/tmp.irBE9wPUAV
> # FAIL: flow offload for ns1/ns2 with NAT
> # <cmdline>:1:1-23: Error: Could not process rule: Table 'filter' does not exist
> # list table inet filter
> # ^^^^^^^^^^^^^^^^^^^^^^^
> # <cmdline>:1:32-32: Error: syntax error, unexpected newline, expecting handle
> # delete rule inet filter forward
> #                                ^
> # FAIL: Could not delete large-packet accept rule
> not ok 5 selftests: netfilter: nft_flowtable.sh # exit=1
> # selftests: netfilter: ipvs.sh
> # skip: could not run test without ipvs module
> ok 6 selftests: netfilter: ipvs.sh # SKIP
> # selftests: netfilter: nft_concat_range.sh
> # TEST: reported issues
> #   Add two elements, flush, re-add                               [
> 1240.096121] kauditd_printk_skb: 40 callbacks suppressed
> [ 1240.096124] audit: type=1325 audit(1602582894.032:87830):
> table=t:72;?:0 family=2 entries=1 op=nft_register_table pid=9084
> subj=kernel comm=\"nft\"
> [ 1240.114551] audit: type=1325 audit(1602582894.032:87830):
> table=t:72;s:1 family=2 entries=0 op=nft_register_set pid=9084
> subj=kernel comm=\"nft\"
> [ 1240.127450] audit: type=1325 audit(1602582894.032:87830):
> table=?:0;?:0 family=0 entries=2 op=nft_register_gen pid=9084
> subj=kernel comm=\"nft\"
> [FAIL]
> [ 1240.169015] audit: type=1325 audit(1602582894.105:87831):
> table=t:72;s:1 family=2 entries=0 op=nft_unregister_set pid=9087
> subj=kernel comm=\"nft\"
> [ 1240.182153] audit: type=1325 audit(1602582894.105:87831):
> table=t:72;?:0 family=2 entries=0 op=nft_unregister_table pid=9087
> subj=kernel comm=\"nft\"
> [ 1240.195412] audit: type=1325 audit(1602582894.105:87831):
> table=?:0;?:0 family=0 entries=3 op=nft_register_gen pid=9087
> subj=kernel comm=\"nft\"
> not ok 7 selftests: netfilter: nft_concat_range.sh # exit=1
> # selftests: netfilter: nft_conntrack_helper.sh
> # SKIP: Could not run test without conntrack tool
> ok 8 selftests: netfilter: nft_conntrack_helper.sh # SKIP
> # selftests: netfilter: nft_queue.sh
> [ 1242.587245] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 1242.605473] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> [ 1243.557996] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> # PASS: ns1-4ngWFkmc can reach ns2-4ngWFkmc
> # internal:0:0-0: Error: Could not open file \"-\": No such file or directory
> #
> #
> # FAIL: ip expected failure, got 0
> not ok 9 selftests: netfilter: nft_queue.sh # exit=1
> # selftests: netfilter: nft_meta.sh
> # /dev/stdin:2:9-15: Error: syntax error, unexpected counter
> # counter iifcount {}
> #         ^^^^^^^
> # /dev/stdin:3:9-15: Error: syntax error, [ 1245.942205] kselftest:
> Running tests in nsfs
> unexpected counter
> # counter iifnamecount {}
> #         ^^^^^^^
> # /dev/stdin:4:9-15: Error: syntax error, unexpected counter
> # counter iifgroupcount {}
> #         ^^^^^^^
> 
> <trim>
> 
> # /dev/stdin:11:9-15: Error: syntax error, unexpected counter
> # counter icurrentyearc[ 1246.027275] kselftest: Running tests in pidfd
> ounter {}
> #         ^^^^^^^
> # SKIP: Could not add test ruleset
> 
> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
> 
> Full test log link,
> https://lkft.validation.linaro.org/scheduler/job/1839013#L12339
> 
> -- 
> Linaro LKFT
> https://lkft.linaro.org

  reply	other threads:[~2020-10-14 19:30 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-14 11:49 selftests: netfilter: nft_nat.sh: /dev/stdin:2:9-15: Error: syntax error, unexpected counter Naresh Kamboju
2020-10-14 19:30 ` Pablo Neira Ayuso [this message]
2020-10-15  3:01   ` Naresh Kamboju
2020-10-15  9:26     ` Pablo Neira Ayuso

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201014193034.GA14337@salvia \
    --to=pablo@netfilter.org \
    --cc=anders.roxell@linaro.org \
    --cc=fabf@skynet.be \
    --cc=fw@strlen.de \
    --cc=keescook@chromium.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=lkft-triage@lists.linaro.org \
    --cc=naresh.kamboju@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=netfilter-devel@vger.kernel.org \
    --cc=shuah@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).