Nouveau Archive on lore.kernel.org
 help / color / Atom feed
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@linux.ie>,
	nouveau@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
	Lucas De Marchi <lucas.demarchi@intel.com>,
	open list <linux-kernel@vger.kernel.org>,
	dri-devel@lists.freedesktop.org,
	Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>,
	Manasi Navare <manasi.d.navare@intel.com>,
	Uma Shankar <uma.shankar@intel.com>,
	Sean Paul <seanpaul@chromium.org>,
	Anshuman Gupta <anshuman.gupta@intel.com>,
	Dave Airlie <airlied@redhat.com>
Subject: Re: [Nouveau] [RFC v3 06/10] drm/i915/dpcd_bl: Cache some backlight capabilities in intel_panel.backlight
Date: Mon, 8 Feb 2021 06:13:47 -0500
Message-ID: <20210208111347.GB4798@intel.com> (raw)
In-Reply-To: <20210205234515.1216538-7-lyude@redhat.com>

On Fri, Feb 05, 2021 at 06:45:10PM -0500, Lyude Paul wrote:
> Since we're about to be moving this code into shared DRM helpers, we might
> as well start to cache certain backlight capabilities that can be
> determined from the EDP DPCD, and are likely to be relevant to the majority
> of drivers using said helpers. The main purpose of this is just to prevent
> every driver from having to check everything against the eDP DPCD using DP
> macros, which makes the code slightly easier to read (especially since the
> names of some of the eDP capabilities don't exactly match up with what we
> actually need to use them for, like DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT
> for instance).
> 
> Signed-off-by: Lyude Paul <lyude@redhat.com>

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

> ---
>  .../drm/i915/display/intel_display_types.h    |  2 ++
>  .../drm/i915/display/intel_dp_aux_backlight.c | 29 ++++++++++++-------
>  2 files changed, 21 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index f4b26e1dbaaf..16824eb3ef93 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -265,6 +265,8 @@ struct intel_panel {
>  			struct {
>  				u8 pwmgen_bit_count;
>  				u8 pwm_freq_pre_divider;
> +				bool lsb_reg_used;
> +				bool aux_enable;
>  			} vesa;
>  			struct {
>  				bool sdr_uses_aux;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> index 95e3e344cf40..f5ae2fb34c1f 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> @@ -270,13 +270,14 @@ intel_dp_aux_hdr_setup_backlight(struct intel_connector *connector, enum pipe pi
>  }
>  
>  /* VESA backlight callbacks */
> -static void set_vesa_backlight_enable(struct intel_dp *intel_dp, bool enable)
> +static void set_vesa_backlight_enable(struct intel_connector *connector, bool enable)
>  {
> +	struct intel_dp *intel_dp = intel_attached_dp(connector);
>  	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>  	u8 reg_val = 0;
>  
>  	/* Early return when display use other mechanism to enable backlight. */
> -	if (!(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP))
> +	if (!connector->panel.backlight.edp.vesa.aux_enable)
>  		return;
>  
>  	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, &reg_val) != 1) {
> @@ -339,9 +340,11 @@ static u32 intel_dp_aux_vesa_get_backlight(struct intel_connector *connector, en
>  			    DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
>  		return 0;
>  	}
> -	level = read_val[0];
> -	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
> +
> +	if (connector->panel.backlight.edp.vesa.lsb_reg_used)
>  		level = (read_val[0] << 8 | read_val[1]);
> +	else
> +		level = read_val[0];
>  
>  	return level;
>  }
> @@ -359,13 +362,14 @@ intel_dp_aux_vesa_set_backlight(const struct drm_connector_state *conn_state,
>  	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>  	u8 vals[2] = { 0x0 };
>  
> -	vals[0] = level;
> -
>  	/* Write the MSB and/or LSB */
> -	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) {
> +	if (connector->panel.backlight.edp.vesa.lsb_reg_used) {
>  		vals[0] = (level & 0xFF00) >> 8;
>  		vals[1] = (level & 0xFF);
> +	} else {
> +		vals[0] = level;
>  	}
> +
>  	if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, vals,
>  			      sizeof(vals)) != sizeof(vals)) {
>  		drm_dbg_kms(&i915->drm,
> @@ -419,14 +423,13 @@ intel_dp_aux_vesa_enable_backlight(const struct intel_crtc_state *crtc_state,
>  	}
>  
>  	intel_dp_aux_vesa_set_backlight(conn_state, level);
> -	set_vesa_backlight_enable(intel_dp, true);
> +	set_vesa_backlight_enable(connector, true);
>  }
>  
>  static void intel_dp_aux_vesa_disable_backlight(const struct drm_connector_state *old_conn_state,
>  						u32 level)
>  {
> -	set_vesa_backlight_enable(enc_to_intel_dp(to_intel_encoder(old_conn_state->best_encoder)),
> -				  false);
> +	set_vesa_backlight_enable(to_intel_connector(old_conn_state->connector), false);
>  }
>  
>  /*
> @@ -524,8 +527,14 @@ static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector *connecto
>  static int intel_dp_aux_vesa_setup_backlight(struct intel_connector *connector,
>  					     enum pipe pipe)
>  {
> +	struct intel_dp *intel_dp = intel_attached_dp(connector);
>  	struct intel_panel *panel = &connector->panel;
>  
> +	if (intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP)
> +		panel->backlight.edp.vesa.aux_enable = true;
> +	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
> +		panel->backlight.edp.vesa.lsb_reg_used = true;
> +
>  	panel->backlight.max = intel_dp_aux_vesa_calc_max_backlight(connector);
>  	if (!panel->backlight.max)
>  		return -ENODEV;
> -- 
> 2.29.2
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

  reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-05 23:45 [Nouveau] [RFC v3 00/10] drm: Extract DPCD backlight helpers from i915, add support in nouveau Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 01/10] drm/nouveau/kms/nv40-/backlight: Assign prop type once Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 02/10] drm/nouveau/kms: Don't probe eDP connectors more then once Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 03/10] drm/i915/dpcd_bl: Remove redundant AUX backlight frequency calculations Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 04/10] drm/i915/dpcd_bl: Handle drm_dpcd_read/write() return values correctly Lyude Paul
2021-02-08 11:11   ` Rodrigo Vivi
2021-02-05 23:45 ` [Nouveau] [RFC v3 05/10] drm/i915/dpcd_bl: Cleanup intel_dp_aux_vesa_enable_backlight() a bit Lyude Paul
2021-02-06  0:07   ` Ilia Mirkin
2021-02-05 23:45 ` [Nouveau] [RFC v3 06/10] drm/i915/dpcd_bl: Cache some backlight capabilities in intel_panel.backlight Lyude Paul
2021-02-08 11:13   ` Rodrigo Vivi [this message]
2021-02-05 23:45 ` [Nouveau] [RFC v3 07/10] drm/i915/dpcd_bl: Move VESA backlight enabling code closer together Lyude Paul
2021-02-08 11:14   ` Rodrigo Vivi
2021-02-05 23:45 ` [Nouveau] [RFC v3 08/10] drm/i915/dpcd_bl: Return early in vesa_calc_max_backlight if we can't read PWMGEN_BIT_COUNT Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 09/10] drm/i915/dpcd_bl: Print return codes for VESA backlight failures Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 10/10] drm/dp: Extract i915's eDP backlight code into DRM helpers Lyude Paul
2021-02-08  8:46   ` Thomas Zimmermann
2021-02-08 23:03     ` Lyude Paul
2021-02-15 18:34       ` Thomas Zimmermann
2021-02-15 20:26         ` Lyude Paul
2021-02-08 22:52 ` [Nouveau] [RFC v3 00/10] drm: Extract DPCD backlight helpers from i915, add support in nouveau Lyude Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210208111347.GB4798@intel.com \
    --to=rodrigo.vivi@intel.com \
    --cc=airlied@linux.ie \
    --cc=airlied@redhat.com \
    --cc=anshuman.gupta@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gwan-gyeong.mun@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lucas.demarchi@intel.com \
    --cc=lyude@redhat.com \
    --cc=manasi.d.navare@intel.com \
    --cc=nouveau@lists.freedesktop.org \
    --cc=seanpaul@chromium.org \
    --cc=uma.shankar@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Nouveau Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/nouveau/0 nouveau/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 nouveau nouveau/ https://lore.kernel.org/nouveau \
		nouveau@lists.freedesktop.org
	public-inbox-index nouveau

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.nouveau


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git