Nouveau Archive on lore.kernel.org
 help / color / Atom feed
From: Lyude Paul <lyude@redhat.com>
To: Thomas Zimmermann <tzimmermann@suse.de>,
	dri-devel@lists.freedesktop.org,  nouveau@lists.freedesktop.org,
	intel-gfx@lists.freedesktop.org
Cc: greg.depoire@gmail.com, Anshuman Gupta <anshuman.gupta@intel.com>,
	David Airlie <airlied@linux.ie>,
	Lucas De Marchi <lucas.demarchi@intel.com>,
	open list <linux-kernel@vger.kernel.org>,
	Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>,
	Manasi Navare <manasi.d.navare@intel.com>,
	Jani Nikula <jani.nikula@intel.com>,
	Uma Shankar <uma.shankar@intel.com>,
	Sean Paul <seanpaul@chromium.org>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	Dave Airlie <airlied@redhat.com>
Subject: Re: [Nouveau] [RFC v3 10/10] drm/dp: Extract i915's eDP backlight code into DRM helpers
Date: Mon, 15 Feb 2021 15:26:01 -0500
Message-ID: <c7b44ae7659d2c871407f483a53378acfa6b3c0d.camel@redhat.com> (raw)
In-Reply-To: <5a67ffa9-ad7f-3682-8d7d-a669e4d0d7c6@suse.de>

On Mon, 2021-02-15 at 19:34 +0100, Thomas Zimmermann wrote:
> Hi
> 
> Am 09.02.21 um 00:03 schrieb Lyude Paul:
> > > 
> > > > +       } else {
> > > > +               buf[0] = level;
> > > > +       }
> > > > +
> > > > +       ret = drm_dp_dpcd_write(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
> > > > buf,
> > > > sizeof(buf));
> > > > +       if (ret != sizeof(buf)) {
> > > > +               DRM_ERROR("%s: Failed to write aux backlight level:
> > > > %d\n",
> > > > aux->name, ret);
> > > 
> > > Since you're adding this code, you should probably convert to drm_err()
> > > helpers as well. Here and elsewhere.
> > 
> > this is next up on my todo list JFYI-I don't do it right now because there
> > isn't
> > actually any backpointer to the drm driver (and you can't just use the
> > parent of
> > the aux device, since that technically doesn't need to be the drm driver).
> > 
> > I'd add it in this series, but that's going to involve updating functions
> > across
> > the tree like drm_dp_aux_init() so I'd like to do it in a different patch
> > series
> 
> Ok, sure. Makes sense.

I'm actually probably just going to do it anyway, since it seems like a want of
folks really want to keep the drm_dbg_*() prints around
> 
> Best regards
> Thomas
> 
> > 
> > > 
> > > > +               return ret < 0 ? ret : -EIO;
> > > > +       }
> > > > +
> > > > +       return 0;
> > > > +}
> > > > +EXPORT_SYMBOL(drm_edp_backlight_set_level);
> > > > +
> > > > +static int
> > > > +drm_edp_backlight_set_enable(struct drm_dp_aux *aux, const struct
> > > > drm_edp_backlight_info *bl,
> > > > +                            bool enable)
> > > > +{
> > > > +       int ret;
> > > > +       u8 buf;
> > > > +
> > > > +       /* The panel uses something other then DPCD for enabling it's
> > > > backlight */
> > > 
> > > 'its'
> > > 
> > > Best regards
> > > Thomas
> > > 
> > > > +       if (!bl->aux_enable)
> > > > +               return 0;
> > > > +
> > > > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
> > > > &buf);
> > > > +       if (ret != 1) {
> > > > +               DRM_ERROR("%s: Failed to read eDP display control
> > > > register:
> > > > %d\n", aux->name, ret);
> > > > +               return ret < 0 ? ret : -EIO;
> > > > +       }
> > > > +       if (enable)
> > > > +               buf |= DP_EDP_BACKLIGHT_ENABLE;
> > > > +       else
> > > > +               buf &= ~DP_EDP_BACKLIGHT_ENABLE;
> > > > +
> > > > +       ret = drm_dp_dpcd_writeb(aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
> > > > buf);
> > > > +       if (ret != 1) {
> > > > +               DRM_ERROR("%s: Failed to write eDP display control
> > > > register:
> > > > %d\n", aux->name, ret);
> > > > +               return ret < 0 ? ret : -EIO;
> > > > +       }
> > > > +
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +/**
> > > > + * drm_edp_backlight_enable() - Enable an eDP panel's backlight using
> > > > DPCD
> > > > + * @aux: The DP AUX channel to use
> > > > + * @bl: Backlight capability info from drm_edp_backlight_init()
> > > > + * @level: The initial backlight level to set via AUX, if there is one
> > > > + *
> > > > + * This function handles enabling DPCD backlight controls on a panel
> > > > over
> > > > DPCD, while additionally
> > > > + * restoring any important backlight state such as the given backlight
> > > > level, the brightness byte
> > > > + * count, backlight frequency, etc.
> > > > + *
> > > > + * Note that certain panels, while supporting brightness level controls
> > > > over DPCD, may not support
> > > > + * having their backlights enabled via the standard
> > > > %DP_EDP_DISPLAY_CONTROL_REGISTER. On such panels
> > > > + * &drm_edp_backlight_info.aux_enable will be set to %false, this
> > > > function
> > > > will skip the step of
> > > > + * programming the %DP_EDP_DISPLAY_CONTROL_REGISTER, and the driver
> > > > must
> > > > perform the required
> > > > + * implementation specific step for enabling the backlight after
> > > > calling
> > > > this function.
> > > > + *
> > > > + * Returns: %0 on success, negative error code on failure.
> > > > + */
> > > > +int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct
> > > > drm_edp_backlight_info *bl,
> > > > +                            const u16 level)
> > > > +{
> > > > +       int ret;
> > > > +       u8 dpcd_buf, new_dpcd_buf;
> > > > +
> > > > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> > > > &dpcd_buf);
> > > > +       if (ret != 1) {
> > > > +               DRM_DEBUG_KMS("%s: Failed to read backlight mode: %d\n",
> > > > aux->name, ret);
> > > > +               return ret < 0 ? ret : -EIO;
> > > > +       }
> > > > +
> > > > +       new_dpcd_buf = dpcd_buf;
> > > > +
> > > > +       if ((dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) !=
> > > > DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
> > > > +               new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
> > > > +               new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
> > > > +
> > > > +               ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT,
> > > > bl-
> > > > > pwmgen_bit_count);
> > > > +               if (ret != 1)
> > > > +                       DRM_DEBUG_KMS("%s: Failed to write aux pwmgen
> > > > bit
> > > > count: %d\n",
> > > > +                                     aux->name, ret);
> > > > +       }
> > > > +
> > > > +       if (bl->pwm_freq_pre_divider) {
> > > > +               ret = drm_dp_dpcd_writeb(aux, DP_EDP_BACKLIGHT_FREQ_SET,
> > > > bl-
> > > > > pwm_freq_pre_divider);
> > > > +               if (ret != 1)
> > > > +                       DRM_DEBUG_KMS("%s: Failed to write aux backlight
> > > > frequency: %d\n",
> > > > +                                     aux->name, ret);
> > > > +               else
> > > > +                       new_dpcd_buf |=
> > > > DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
> > > > +       }
> > > > +
> > > > +       if (new_dpcd_buf != dpcd_buf) {
> > > > +               ret = drm_dp_dpcd_writeb(aux,
> > > > DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf);
> > > > +               if (ret != 1) {
> > > > +                       DRM_DEBUG_KMS("%s: Failed to write aux backlight
> > > > mode: %d\n",
> > > > +                                     aux->name, ret);
> > > > +                       return ret < 0 ? ret : -EIO;
> > > > +               }
> > > > +       }
> > > > +
> > > > +       ret = drm_edp_backlight_set_level(aux, bl, level);
> > > > +       if (ret < 0)
> > > > +               return ret;
> > > > +       ret = drm_edp_backlight_set_enable(aux, bl, true);
> > > > +       if (ret < 0)
> > > > +               return ret;
> > > > +
> > > > +       return 0;
> > > > +}
> > > > +EXPORT_SYMBOL(drm_edp_backlight_enable);
> > > > +
> > > > +/**
> > > > + * drm_edp_backlight_disable() - Disable an eDP backlight using DPCD,
> > > > if
> > > > supported
> > > > + * @aux: The DP AUX channel to use
> > > > + * @bl: Backlight capability info from drm_edp_backlight_init()
> > > > + *
> > > > + * This function handles disabling DPCD backlight controls on a panel
> > > > over
> > > > AUX. Note that some
> > > > + * panels have backlights that are enabled/disabled by other means,
> > > > despite
> > > > having their brightness
> > > > + * values controlled through DPCD. On such panels
> > > > &drm_edp_backlight_info.aux_enable will be set to
> > > > + * %false, this function will become a no-op (and we will skip updating
> > > > + * %DP_EDP_DISPLAY_CONTROL_REGISTER), and the driver must take care to
> > > > perform it's own
> > > > + * implementation specific step for disabling the backlight.
> > > > + *
> > > > + * Returns: %0 on success or no-op, negative error code on failure.
> > > > + */
> > > > +int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct
> > > > drm_edp_backlight_info *bl)
> > > > +{
> > > > +       int ret;
> > > > +
> > > > +       ret = drm_edp_backlight_set_enable(aux, bl, false);
> > > > +       if (ret < 0)
> > > > +               return ret;
> > > > +
> > > > +       return 0;
> > > > +}
> > > > +EXPORT_SYMBOL(drm_edp_backlight_disable);
> > > > +
> > > > +static inline int
> > > > +drm_edp_backlight_probe_max(struct drm_dp_aux *aux, struct
> > > > drm_edp_backlight_info *bl,
> > > > +                           u16 driver_pwm_freq_hz, const u8
> > > > edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE])
> > > > +{
> > > > +       int fxp, fxp_min, fxp_max, fxp_actual, f = 1;
> > > > +       int ret;
> > > > +       u8 pn, pn_min, pn_max;
> > > > +
> > > > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT, &pn);
> > > > +       if (ret != 1) {
> > > > +               DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap:
> > > > %d\n", aux->name, ret);
> > > > +               return -ENODEV;
> > > > +       }
> > > > +
> > > > +       pn &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > > > +       bl->max = (1 << pn) - 1;
> > > > +       if (!driver_pwm_freq_hz)
> > > > +               return 0;
> > > > +
> > > > +       /*
> > > > +        * Set PWM Frequency divider to match desired frequency provided
> > > > by
> > > > the driver.
> > > > +        * The PWM Frequency is calculated as 27Mhz / (F x P).
> > > > +        * - Where F = PWM Frequency Pre-Divider value programmed by
> > > > field
> > > > 7:0 of the
> > > > +        *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address
> > > > 00728h)
> > > > +        * - Where P = 2^Pn, where Pn is the value programmed by field
> > > > 4:0
> > > > of the
> > > > +        *             EDP_PWMGEN_BIT_COUNT register (DPCD Address
> > > > 00724h)
> > > > +        */
> > > > +
> > > > +       /* Find desired value of (F x P)
> > > > +        * Note that, if F x P is out of supported range, the maximum
> > > > value
> > > > or minimum value will
> > > > +        * applied automatically. So no need to check that.
> > > > +        */
> > > > +       fxp = DIV_ROUND_CLOSEST(1000 * DP_EDP_BACKLIGHT_FREQ_BASE_KHZ,
> > > > driver_pwm_freq_hz);
> > > > +
> > > > +       /* Use highest possible value of Pn for more granularity of
> > > > brightness adjustment while
> > > > +        * satifying the conditions below.
> > > > +        * - Pn is in the range of Pn_min and Pn_max
> > > > +        * - F is in the range of 1 and 255
> > > > +        * - FxP is within 25% of desired value.
> > > > +        *   Note: 25% is arbitrary value and may need some tweak.
> > > > +        */
> > > > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN,
> > > > &pn_min);
> > > > +       if (ret != 1) {
> > > > +               DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap
> > > > min:
> > > > %d\n", aux->name, ret);
> > > > +               return 0;
> > > > +       }
> > > > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX,
> > > > &pn_max);
> > > > +       if (ret != 1) {
> > > > +               DRM_DEBUG_KMS("%s: Failed to read pwmgen bit count cap
> > > > max:
> > > > %d\n", aux->name, ret);
> > > > +               return 0;
> > > > +       }
> > > > +       pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > > > +       pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > > > +
> > > > +       /* Ensure frequency is within 25% of desired value */
> > > > +       fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
> > > > +       fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
> > > > +       if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
> > > > +               DRM_DEBUG_KMS("%s: Driver defined backlight frequency
> > > > (%d)
> > > > out of range\n",
> > > > +                             aux->name, driver_pwm_freq_hz);
> > > > +               return 0;
> > > > +       }
> > > > +
> > > > +       for (pn = pn_max; pn >= pn_min; pn--) {
> > > > +               f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255);
> > > > +               fxp_actual = f << pn;
> > > > +               if (fxp_min <= fxp_actual && fxp_actual <= fxp_max)
> > > > +                       break;
> > > > +       }
> > > > +
> > > > +       ret = drm_dp_dpcd_writeb(aux, DP_EDP_PWMGEN_BIT_COUNT, pn);
> > > > +       if (ret != 1) {
> > > > +               DRM_DEBUG_KMS("%s: Failed to write aux pwmgen bit count:
> > > > %d\n", aux->name, ret);
> > > > +               return 0;
> > > > +       }
> > > > +       bl->pwmgen_bit_count = pn;
> > > > +       bl->max = (1 << pn) - 1;
> > > > +
> > > > +       if (edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP) {
> > > > +               bl->pwm_freq_pre_divider = f;
> > > > +               DRM_DEBUG_KMS("%s: Using backlight frequency from driver
> > > > (%dHz)\n",
> > > > +                             aux->name, driver_pwm_freq_hz);
> > > > +       }
> > > > +
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +static inline int
> > > > +drm_edp_backlight_probe_level(struct drm_dp_aux *aux, struct
> > > > drm_edp_backlight_info *bl,
> > > > +                             u8 *current_mode)
> > > > +{
> > > > +       int ret;
> > > > +       u8 buf[2];
> > > > +       u8 mode_reg;
> > > > +
> > > > +       ret = drm_dp_dpcd_readb(aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> > > > &mode_reg);
> > > > +       if (ret != 1) {
> > > > +               DRM_DEBUG_KMS("%s: Failed to read backlight mode: %d\n",
> > > > aux->name, ret);
> > > > +               return ret < 0 ? ret : -EIO;
> > > > +       }
> > > > +
> > > > +       *current_mode = (mode_reg & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK);
> > > > +       if (*current_mode == DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
> > > > +               int size = 1 + bl->lsb_reg_used;
> > > > +
> > > > +               ret = drm_dp_dpcd_read(aux,
> > > > DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
> > > > buf, size);
> > > > +               if (ret != size) {
> > > > +                       DRM_DEBUG_KMS("%s: Failed to read backlight
> > > > level:
> > > > %d\n", aux->name, ret);
> > > > +                       return ret < 0 ? ret : -EIO;
> > > > +               }
> > > > +
> > > > +               if (bl->lsb_reg_used)
> > > > +                       return (buf[0] << 8) | buf[1];
> > > > +               else
> > > > +                       return buf[0];
> > > > +       }
> > > > +
> > > > +       /*
> > > > +        * If we're not in DPCD control mode yet, the programmed
> > > > brightness
> > > > value is meaningless and
> > > > +        * the driver should assume max brightness
> > > > +        */
> > > > +       return bl->max;
> > > > +}
> > > > +
> > > > +/**
> > > > + * drm_edp_backlight_init() - Probe a display panel's TCON using the
> > > > standard VESA eDP backlight
> > > > + * interface.
> > > > + * @aux: The DP aux device to use for probing
> > > > + * @bl: The &drm_edp_backlight_info struct to fill out with information
> > > > on
> > > > the backlight
> > > > + * @driver_pwm_freq_hz: Optional PWM frequency from the driver in hz
> > > > + * @edp_dpcd: A cached copy of the eDP DPCD
> > > > + * @current_level: Where to store the probed brightness level
> > > > + * @current_mode: Where to store the currently set backlight control
> > > > mode
> > > > + *
> > > > + * Initializes a &drm_edp_backlight_info struct by probing @aux for
> > > > it's
> > > > backlight capabilities,
> > > > + * along with also probing the current and maximum supported brightness
> > > > levels.
> > > > + *
> > > > + * If @driver_pwm_freq_hz is non-zero, this will be used as the
> > > > backlight
> > > > frequency. Otherwise, the
> > > > + * default frequency from the panel is used.
> > > > + *
> > > > + * Returns: %0 on success, negative error code on failure.
> > > > + */
> > > > +int
> > > > +drm_edp_backlight_init(struct drm_dp_aux *aux, struct
> > > > drm_edp_backlight_info *bl,
> > > > +                      u16 driver_pwm_freq_hz, const u8
> > > > edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE],
> > > > +                      u16 *current_level, u8 *current_mode)
> > > > +{
> > > > +       int ret;
> > > > +
> > > > +       if (edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP)
> > > > +               bl->aux_enable = true;
> > > > +       if (edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
> > > > +               bl->lsb_reg_used = true;
> > > > +
> > > > +       ret = drm_edp_backlight_probe_max(aux, bl, driver_pwm_freq_hz,
> > > > edp_dpcd);
> > > > +       if (ret < 0)
> > > > +               return ret;
> > > > +
> > > > +       ret = drm_edp_backlight_probe_level(aux, bl, current_mode);
> > > > +       if (ret < 0)
> > > > +               return ret;
> > > > +       *current_level = ret;
> > > > +
> > > > +       DRM_DEBUG_KMS("%s: Found backlight level=%d/%d
> > > > pwm_freq_pre_divider=%d mode=%x\n",
> > > > +                     aux->name, *current_level, bl->max, bl-
> > > > > pwm_freq_pre_divider, *current_mode);
> > > > +       DRM_DEBUG_KMS("%s: Backlight caps: pwmgen_bit_count=%d
> > > > lsb_reg_used=%d aux_enable=%d\n",
> > > > +                     aux->name, bl->pwmgen_bit_count, bl->lsb_reg_used,
> > > > bl-
> > > > > aux_enable);
> > > > +       return 0;
> > > > +}
> > > > +EXPORT_SYMBOL(drm_edp_backlight_init);
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> > > > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > > > index 16824eb3ef93..03051ab75d30 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > > > @@ -263,10 +263,7 @@ struct intel_panel {
> > > >                  /* DPCD backlight */
> > > >                  union {
> > > >                          struct {
> > > > -                               u8 pwmgen_bit_count;
> > > > -                               u8 pwm_freq_pre_divider;
> > > > -                               bool lsb_reg_used;
> > > > -                               bool aux_enable;
> > > > +                               struct drm_edp_backlight_info info;
> > > >                          } vesa;
> > > >                          struct {
> > > >                                  bool sdr_uses_aux;
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> > > > b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> > > > index 813f6c553156..286eb337448e 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> > > > @@ -270,114 +270,19 @@ intel_dp_aux_hdr_setup_backlight(struct
> > > > intel_connector *connector, enum pipe pi
> > > >    }
> > > >    
> > > >    /* VESA backlight callbacks */
> > > > -static bool intel_dp_aux_vesa_backlight_dpcd_mode(struct
> > > > intel_connector
> > > > *connector)
> > > > -{
> > > > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > > > -       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > > > -       int ret;
> > > > -       u8 mode_reg;
> > > > -
> > > > -       ret = drm_dp_dpcd_readb(&intel_dp->aux,
> > > > DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &mode_reg);
> > > > -       if (ret != 1) {
> > > > -               drm_dbg_kms(&i915->drm, "Failed to read backlight mode:
> > > > %d\n", ret);
> > > > -               return false;
> > > > -       }
> > > > -
> > > > -       return (mode_reg & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) ==
> > > > -              DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
> > > > -}
> > > > -
> > > > -/*
> > > > - * Read the current backlight value from DPCD register(s) based
> > > > - * on if 8-bit(MSB) or 16-bit(MSB and LSB) values are supported
> > > > - */
> > > >    static u32 intel_dp_aux_vesa_get_backlight(struct intel_connector
> > > > *connector, enum pipe unused)
> > > >    {
> > > > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > > > -       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > > > -       int ret;
> > > > -       u8 read_val[2] = { 0x0 };
> > > > -       u16 level = 0;
> > > > -
> > > > -       /*
> > > > -        * If we're not in DPCD control mode yet, the programmed
> > > > brightness
> > > > -        * value is meaningless and we should assume max brightness
> > > > -        */
> > > > -       if (!intel_dp_aux_vesa_backlight_dpcd_mode(connector))
> > > > -               return connector->panel.backlight.max;
> > > > -
> > > > -       ret = drm_dp_dpcd_read(&intel_dp->aux,
> > > > DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, &read_val,
> > > > -                              sizeof(read_val));
> > > > -       if (ret != sizeof(read_val)) {
> > > > -               drm_dbg_kms(&i915->drm, "Failed to read brightness
> > > > level:
> > > > %d\n", ret);
> > > > -               return 0;
> > > > -       }
> > > > -
> > > > -       if (connector->panel.backlight.edp.vesa.lsb_reg_used)
> > > > -               level = (read_val[0] << 8 | read_val[1]);
> > > > -       else
> > > > -               level = read_val[0];
> > > > -
> > > > -       return level;
> > > > +       return connector->panel.backlight.level;
> > > >    }
> > > >    
> > > > -/*
> > > > - * Sends the current backlight level over the aux channel, checking if
> > > > its
> > > > using
> > > > - * 8-bit or 16 bit value (MSB and LSB)
> > > > - */
> > > >    static void
> > > > -intel_dp_aux_vesa_set_backlight(const struct drm_connector_state
> > > > *conn_state,
> > > > -                               u32 level)
> > > > +intel_dp_aux_vesa_set_backlight(const struct drm_connector_state
> > > > *conn_state, u32 level)
> > > >    {
> > > >          struct intel_connector *connector =
> > > > to_intel_connector(conn_state-
> > > > > connector);
> > > > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > > > -       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > > > -       int ret;
> > > > -       u8 vals[2] = { 0x0 };
> > > > -
> > > > -       /* Write the MSB and/or LSB */
> > > > -       if (connector->panel.backlight.edp.vesa.lsb_reg_used) {
> > > > -               vals[0] = (level & 0xFF00) >> 8;
> > > > -               vals[1] = (level & 0xFF);
> > > > -       } else {
> > > > -               vals[0] = level;
> > > > -       }
> > > > -
> > > > -       ret = drm_dp_dpcd_write(&intel_dp->aux,
> > > > DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, vals,
> > > > -                               sizeof(vals));
> > > > -       if (ret != sizeof(vals)) {
> > > > -               drm_dbg_kms(&i915->drm, "Failed to write aux backlight
> > > > level: %d\n", ret);
> > > > -               return;
> > > > -       }
> > > > -}
> > > > -
> > > > -static void set_vesa_backlight_enable(struct intel_connector
> > > > *connector,
> > > > bool enable)
> > > > -{
> > > > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > > > -       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > > > -       int ret;
> > > > -       u8 reg_val = 0;
> > > > -
> > > > -       /* Early return when display use other mechanism to enable
> > > > backlight. */
> > > > -       if (!connector->panel.backlight.edp.vesa.aux_enable)
> > > > -               return;
> > > > -
> > > > -       ret = drm_dp_dpcd_readb(&intel_dp->aux,
> > > > DP_EDP_DISPLAY_CONTROL_REGISTER, &reg_val);
> > > > -       if (ret != 1) {
> > > > -               drm_dbg_kms(&i915->drm, "Failed to read eDP display
> > > > control
> > > > register: %d\n", ret);
> > > > -               return;
> > > > -       }
> > > > -
> > > > -       if (enable)
> > > > -               reg_val |= DP_EDP_BACKLIGHT_ENABLE;
> > > > -       else
> > > > -               reg_val &= ~(DP_EDP_BACKLIGHT_ENABLE);
> > > > +       struct intel_panel *panel = &connector->panel;
> > > > +       struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
> > > >    
> > > > -       ret = drm_dp_dpcd_writeb(&intel_dp->aux,
> > > > DP_EDP_DISPLAY_CONTROL_REGISTER, reg_val);
> > > > -       if (ret != 1) {
> > > > -               drm_dbg_kms(&i915->drm, "Failed to %s aux backlight:
> > > > %d\n",
> > > > -                           enable ? "enable" : "disable", ret);
> > > > -       }
> > > > +       drm_edp_backlight_set_level(&intel_dp->aux, &panel-
> > > > > backlight.edp.vesa.info, level);
> > > >    }
> > > >    
> > > >    static void
> > > > @@ -385,170 +290,46 @@ intel_dp_aux_vesa_enable_backlight(const struct
> > > > intel_crtc_state *crtc_state,
> > > >                                     const struct drm_connector_state
> > > > *conn_state, u32 level)
> > > >    {
> > > >          struct intel_connector *connector =
> > > > to_intel_connector(conn_state-
> > > > > connector);
> > > > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > > > -       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > > >          struct intel_panel *panel = &connector->panel;
> > > > -       int ret;
> > > > -       u8 dpcd_buf, new_dpcd_buf;
> > > > -       u8 pwmgen_bit_count = panel-
> > > > >backlight.edp.vesa.pwmgen_bit_count;
> > > > -
> > > > -       ret = drm_dp_dpcd_readb(&intel_dp->aux,
> > > > DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf);
> > > > -       if (ret != 1) {
> > > > -               drm_dbg_kms(&i915->drm, "Failed to read backlight mode:
> > > > %d\n", ret);
> > > > -               return;
> > > > -       }
> > > > -
> > > > -       new_dpcd_buf = dpcd_buf;
> > > > -
> > > > -       if ((dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) !=
> > > > DP_EDP_BACKLIGHT_CONTROL_MODE_MASK) {
> > > > -               new_dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK;
> > > > -               new_dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD;
> > > > -
> > > > -               ret = drm_dp_dpcd_writeb(&intel_dp->aux,
> > > > DP_EDP_PWMGEN_BIT_COUNT, pwmgen_bit_count);
> > > > -               if (ret != 1)
> > > > -                       drm_dbg_kms(&i915->drm, "Failed to write aux
> > > > pwmgen
> > > > bit count: %d\n", ret);
> > > > -       }
> > > > -
> > > > -       if (panel->backlight.edp.vesa.pwm_freq_pre_divider) {
> > > > -               ret = drm_dp_dpcd_writeb(&intel_dp->aux,
> > > > DP_EDP_BACKLIGHT_FREQ_SET,
> > > > -                                        panel-
> > > > > backlight.edp.vesa.pwm_freq_pre_divider);
> > > > -               if (ret == 1)
> > > > -                       new_dpcd_buf |=
> > > > DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
> > > > -               else
> > > > -                       drm_dbg_kms(&i915->drm, "Failed to write aux
> > > > backlight frequency: %d\n",
> > > > -                                   ret);
> > > > -       }
> > > > -
> > > > -       if (new_dpcd_buf != dpcd_buf) {
> > > > -               ret = drm_dp_dpcd_writeb(&intel_dp->aux,
> > > > DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> > > > -                                        new_dpcd_buf);
> > > > -               if (ret != 1)
> > > > -                       drm_dbg_kms(&i915->drm, "Failed to write aux
> > > > backlight mode: %d\n", ret);
> > > > -       }
> > > > +       struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
> > > >    
> > > > -       intel_dp_aux_vesa_set_backlight(conn_state, level);
> > > > -       set_vesa_backlight_enable(connector, true);
> > > > +       drm_edp_backlight_enable(&intel_dp->aux, &panel-
> > > > > backlight.edp.vesa.info, level);
> > > >    }
> > > >    
> > > >    static void intel_dp_aux_vesa_disable_backlight(const struct
> > > > drm_connector_state *old_conn_state,
> > > >                                                  u32 level)
> > > >    {
> > > > -       set_vesa_backlight_enable(to_intel_connector(old_conn_state-
> > > > > connector), false);
> > > > -}
> > > > -
> > > > -/*
> > > > - * Compute PWM frequency divider value based off the frequency provided
> > > > to
> > > > us by the vbt.
> > > > - * The PWM Frequency is calculated as 27Mhz / (F x P).
> > > > - * - Where F = PWM Frequency Pre-Divider value programmed by field 7:0
> > > > of
> > > > the
> > > > - *             EDP_BACKLIGHT_FREQ_SET register (DPCD Address 00728h)
> > > > - * - Where P = 2^Pn, where Pn is the value programmed by field 4:0 of
> > > > the
> > > > - *             EDP_PWMGEN_BIT_COUNT register (DPCD Address 00724h)
> > > > - */
> > > > -static u32 intel_dp_aux_vesa_calc_max_backlight(struct intel_connector
> > > > *connector)
> > > > -{
> > > > -       struct drm_i915_private *i915 = to_i915(connector->base.dev);
> > > > -       struct intel_dp *intel_dp = intel_attached_dp(connector);
> > > > +       struct intel_connector *connector =
> > > > to_intel_connector(old_conn_state->connector);
> > > >          struct intel_panel *panel = &connector->panel;
> > > > -       u32 max_backlight = 0;
> > > > -       int ret, freq, fxp, fxp_min, fxp_max, fxp_actual, f = 1;
> > > > -       u8 pn, pn_min, pn_max;
> > > > -
> > > > -       ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT,
> > > > &pn);
> > > > -       if (ret != 1) {
> > > > -               drm_dbg_kms(&i915->drm, "Failed to read pwmgen bit count
> > > > cap: %d\n", ret);
> > > > -               return 0;
> > > > -       }
> > > > -
> > > > -       pn &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > > > -       max_backlight = (1 << pn) - 1;
> > > > -
> > > > -       /* Find desired value of (F x P)
> > > > -        * Note that, if F x P is out of supported range, the maximum
> > > > value
> > > > or
> > > > -        * minimum value will applied automatically. So no need to check
> > > > that.
> > > > -        */
> > > > -       freq = i915->vbt.backlight.pwm_freq_hz;
> > > > -       drm_dbg_kms(&i915->drm, "VBT defined backlight frequency %u
> > > > Hz\n",
> > > > -                   freq);
> > > > -       if (!freq) {
> > > > -               drm_dbg_kms(&i915->drm,
> > > > -                           "Use panel default backlight frequency\n");
> > > > -               return max_backlight;
> > > > -       }
> > > > -
> > > > -       fxp = DIV_ROUND_CLOSEST(KHz(DP_EDP_BACKLIGHT_FREQ_BASE_KHZ),
> > > > freq);
> > > > -
> > > > -       /* Use highest possible value of Pn for more granularity of
> > > > brightness
> > > > -        * adjustment while satifying the conditions below.
> > > > -        * - Pn is in the range of Pn_min and Pn_max
> > > > -        * - F is in the range of 1 and 255
> > > > -        * - FxP is within 25% of desired value.
> > > > -        *   Note: 25% is arbitrary value and may need some tweak.
> > > > -        */
> > > > -       ret = drm_dp_dpcd_readb(&intel_dp->aux,
> > > > DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min);
> > > > -       if (ret != 1) {
> > > > -               drm_dbg_kms(&i915->drm, "Failed to read pwmgen bit count
> > > > cap
> > > > min: %d\n", ret);
> > > > -               return max_backlight;
> > > > -       }
> > > > -       ret = drm_dp_dpcd_readb(&intel_dp->aux,
> > > > DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max);
> > > > -       if (ret != 1) {
> > > > -               drm_dbg_kms(&i915->drm, "Failed to read pwmgen bit count
> > > > cap
> > > > max: %d\n", ret);
> > > > -               return max_backlight;
> > > > -       }
> > > > -       pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > > > -       pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
> > > > -
> > > > -       /* Ensure frequency is within 25% of desired value */
> > > > -       fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
> > > > -       fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
> > > > -
> > > > -       if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
> > > > -               drm_dbg_kms(&i915->drm,
> > > > -                           "VBT defined backlight frequency out of
> > > > range\n");
> > > > -               return max_backlight;
> > > > -       }
> > > > -
> > > > -       for (pn = pn_max; pn >= pn_min; pn--) {
> > > > -               f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255);
> > > > -               fxp_actual = f << pn;
> > > > -               if (fxp_min <= fxp_actual && fxp_actual <= fxp_max)
> > > > -                       break;
> > > > -       }
> > > > -
> > > > -       drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n",
> > > > pn);
> > > > -       ret = drm_dp_dpcd_writeb(&intel_dp->aux,
> > > > DP_EDP_PWMGEN_BIT_COUNT,
> > > > pn);
> > > > -       if (ret != 1) {
> > > > -               drm_dbg_kms(&i915->drm, "Failed to write aux pwmgen bit
> > > > count: %d\n", ret);
> > > > -               return max_backlight;
> > > > -       }
> > > > -
> > > > -       panel->backlight.edp.vesa.pwmgen_bit_count = pn;
> > > > -       if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP)
> > > > -               panel->backlight.edp.vesa.pwm_freq_pre_divider = f;
> > > > -
> > > > -       max_backlight = (1 << pn) - 1;
> > > > +       struct intel_dp *intel_dp = enc_to_intel_dp(connector->encoder);
> > > >    
> > > > -       return max_backlight;
> > > > +       drm_edp_backlight_disable(&intel_dp->aux, &panel-
> > > > > backlight.edp.vesa.info);
> > > >    }
> > > >    
> > > > -static int intel_dp_aux_vesa_setup_backlight(struct intel_connector
> > > > *connector,
> > > > -                                            enum pipe pipe)
> > > > +static int intel_dp_aux_vesa_setup_backlight(struct intel_connector
> > > > *connector, enum pipe pipe)
> > > >    {
> > > >          struct intel_dp *intel_dp = intel_attached_dp(connector);
> > > >          struct intel_panel *panel = &connector->panel;
> > > > +       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > > > +       u16 current_level;
> > > > +       u8 current_mode;
> > > > +       int ret;
> > > >    
> > > > -       if (intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP)
> > > > -               panel->backlight.edp.vesa.aux_enable = true;
> > > > -       if (intel_dp->edp_dpcd[2] &
> > > > DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
> > > > -               panel->backlight.edp.vesa.lsb_reg_used = true;
> > > > -
> > > > -       panel->backlight.max =
> > > > intel_dp_aux_vesa_calc_max_backlight(connector);
> > > > -       if (!panel->backlight.max)
> > > > -               return -ENODEV;
> > > > +       ret = drm_edp_backlight_init(&intel_dp->aux, &panel-
> > > > > backlight.edp.vesa.info,
> > > > +                                    i915->vbt.backlight.pwm_freq_hz,
> > > > intel_dp->edp_dpcd,
> > > > +                                    &current_level, &current_mode);
> > > > +       if (ret < 0)
> > > > +               return ret;
> > > >    
> > > > +       panel->backlight.max = panel->backlight.edp.vesa.info.max;
> > > >          panel->backlight.min = 0;
> > > > -       panel->backlight.level =
> > > > intel_dp_aux_vesa_get_backlight(connector,
> > > > pipe);
> > > > -       panel->backlight.enabled =
> > > > intel_dp_aux_vesa_backlight_dpcd_mode(connector) &&
> > > > -                                  panel->backlight.level != 0;
> > > > +       if (current_mode == DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD) {
> > > > +               panel->backlight.level = current_level;
> > > > +               panel->backlight.enabled = panel->backlight.level != 0;
> > > > +       } else {
> > > > +               panel->backlight.level = panel->backlight.max;
> > > > +               panel->backlight.enabled = false;
> > > > +       }
> > > >    
> > > >          return 0;
> > > >    }
> > > > @@ -559,16 +340,12 @@ intel_dp_aux_supports_vesa_backlight(struct
> > > > intel_connector *connector)
> > > >          struct intel_dp *intel_dp = intel_attached_dp(connector);
> > > >          struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > > >    
> > > > -       /* Check the eDP Display control capabilities registers to
> > > > determine
> > > > if
> > > > -        * the panel can support backlight control over the aux channel.
> > > > -        *
> > > > -        * TODO: We currently only support AUX only backlight
> > > > configurations, not backlights which
> > > > +       /* TODO: We currently only support AUX only backlight
> > > > configurations, not backlights which
> > > >           * require a mix of PWM and AUX controls to work. In the mean
> > > > time,
> > > > these machines typically
> > > >           * work just fine using normal PWM controls anyway.
> > > >           */
> > > > -       if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP
> > > > &&
> > > > -           (intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP) &&
> > > > -           (intel_dp->edp_dpcd[2] &
> > > > DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) {
> > > > +       if ((intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP) &&
> > > > +           drm_edp_backlight_supported(intel_dp->edp_dpcd)) {
> > > >                  drm_dbg_kms(&i915->drm, "AUX Backlight Control
> > > > Supported!\n");
> > > >                  return true;
> > > >          }
> > > > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> > > > index edffd1dcca3e..1eca0b42fc45 100644
> > > > --- a/include/drm/drm_dp_helper.h
> > > > +++ b/include/drm/drm_dp_helper.h
> > > > @@ -1790,6 +1790,24 @@ drm_dp_sink_can_do_video_without_timing_msa(const
> > > > u8
> > > > dpcd[DP_RECEIVER_CAP_SIZE])
> > > >                  DP_MSA_TIMING_PAR_IGNORED;
> > > >    }
> > > >    
> > > > +/**
> > > > + * drm_edp_backlight_supported() - Check an eDP DPCD for VESA backlight
> > > > support
> > > > + * @edp_dpcd: The DPCD to check
> > > > + *
> > > > + * Note that currently this function will return %false for panels
> > > > which
> > > > support various DPCD
> > > > + * backlight features but which require the brightness be set through
> > > > PWM,
> > > > and don't support setting
> > > > + * the brightness level via the DPCD. This is a TODO.
> > > > + *
> > > > + * Returns: %True if @edp_dpcd indicates that VESA backlight controls
> > > > are
> > > > supported, %false
> > > > + * otherwise
> > > > + */
> > > > +static inline bool
> > > > +drm_edp_backlight_supported(const u8
> > > > edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE])
> > > > +{
> > > > +       return (edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) &&
> > > > +               (edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP);
> > > > +}
> > > > +
> > > >    /*
> > > >     * DisplayPort AUX channel
> > > >     */
> > > > @@ -2089,6 +2107,36 @@ drm_dp_has_quirk(const struct drm_dp_desc *desc,
> > > > enum
> > > > drm_dp_quirk quirk)
> > > >          return desc->quirks & BIT(quirk);
> > > >    }
> > > >    
> > > > +/**
> > > > + * struct drm_edp_backlight_info - Probed eDP backlight info struct
> > > > + * @pwmgen_bit_count: The pwmgen bit count
> > > > + * @pwm_freq_pre_divider: The PWM frequency pre-divider value being
> > > > used
> > > > for this backlight, if any
> > > > + * @max: The maximum backlight level that may be set
> > > > + * @lsb_reg_used: Do we also write values to the
> > > > DP_EDP_BACKLIGHT_BRIGHTNESS_LSB register?
> > > > + * @aux_enable: Does the panel support the AUX enable cap?
> > > > + *
> > > > + * This structure contains various data about an eDP backlight, which
> > > > can
> > > > be populated by using
> > > > + * drm_edp_backlight_init().
> > > > + */
> > > > +struct drm_edp_backlight_info {
> > > > +       u8 pwmgen_bit_count;
> > > > +       u8 pwm_freq_pre_divider;
> > > > +       u16 max;
> > > > +
> > > > +       bool lsb_reg_used : 1;
> > > > +       bool aux_enable : 1;
> > > > +};
> > > > +
> > > > +int
> > > > +drm_edp_backlight_init(struct drm_dp_aux *aux, struct
> > > > drm_edp_backlight_info *bl,
> > > > +                      u16 driver_pwm_freq_hz, const u8
> > > > edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE],
> > > > +                      u16 *current_level, u8 *current_mode);
> > > > +int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct
> > > > drm_edp_backlight_info *bl,
> > > > +                               u16 level);
> > > > +int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct
> > > > drm_edp_backlight_info *bl,
> > > > +                            u16 level);
> > > > +int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct
> > > > drm_edp_backlight_info *bl);
> > > > +
> > > >    #ifdef CONFIG_DRM_DP_CEC
> > > >    void drm_dp_cec_irq(struct drm_dp_aux *aux);
> > > >    void drm_dp_cec_register_connector(struct drm_dp_aux *aux,
> > > > 
> > > 
> > 
> 

-- 
Sincerely,
   Lyude Paul (she/her)
   Software Engineer at Red Hat
   
Note: I deal with a lot of emails and have a lot of bugs on my plate. If you've
asked me a question, are waiting for a review/merge on a patch, etc. and I
haven't responded in a while, please feel free to send me another email to check
on my status. I don't bite!

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

  reply index

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-05 23:45 [Nouveau] [RFC v3 00/10] drm: Extract DPCD backlight helpers from i915, add support in nouveau Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 01/10] drm/nouveau/kms/nv40-/backlight: Assign prop type once Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 02/10] drm/nouveau/kms: Don't probe eDP connectors more then once Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 03/10] drm/i915/dpcd_bl: Remove redundant AUX backlight frequency calculations Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 04/10] drm/i915/dpcd_bl: Handle drm_dpcd_read/write() return values correctly Lyude Paul
2021-02-08 11:11   ` Rodrigo Vivi
2021-02-05 23:45 ` [Nouveau] [RFC v3 05/10] drm/i915/dpcd_bl: Cleanup intel_dp_aux_vesa_enable_backlight() a bit Lyude Paul
2021-02-06  0:07   ` Ilia Mirkin
2021-02-05 23:45 ` [Nouveau] [RFC v3 06/10] drm/i915/dpcd_bl: Cache some backlight capabilities in intel_panel.backlight Lyude Paul
2021-02-08 11:13   ` Rodrigo Vivi
2021-02-05 23:45 ` [Nouveau] [RFC v3 07/10] drm/i915/dpcd_bl: Move VESA backlight enabling code closer together Lyude Paul
2021-02-08 11:14   ` Rodrigo Vivi
2021-02-05 23:45 ` [Nouveau] [RFC v3 08/10] drm/i915/dpcd_bl: Return early in vesa_calc_max_backlight if we can't read PWMGEN_BIT_COUNT Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 09/10] drm/i915/dpcd_bl: Print return codes for VESA backlight failures Lyude Paul
2021-02-05 23:45 ` [Nouveau] [RFC v3 10/10] drm/dp: Extract i915's eDP backlight code into DRM helpers Lyude Paul
2021-02-08  8:46   ` Thomas Zimmermann
2021-02-08 23:03     ` Lyude Paul
2021-02-15 18:34       ` Thomas Zimmermann
2021-02-15 20:26         ` Lyude Paul [this message]
2021-02-08 22:52 ` [Nouveau] [RFC v3 00/10] drm: Extract DPCD backlight helpers from i915, add support in nouveau Lyude Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c7b44ae7659d2c871407f483a53378acfa6b3c0d.camel@redhat.com \
    --to=lyude@redhat.com \
    --cc=airlied@linux.ie \
    --cc=airlied@redhat.com \
    --cc=anshuman.gupta@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=greg.depoire@gmail.com \
    --cc=gwan-gyeong.mun@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lucas.demarchi@intel.com \
    --cc=manasi.d.navare@intel.com \
    --cc=nouveau@lists.freedesktop.org \
    --cc=rodrigo.vivi@intel.com \
    --cc=seanpaul@chromium.org \
    --cc=tzimmermann@suse.de \
    --cc=uma.shankar@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Nouveau Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/nouveau/0 nouveau/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 nouveau nouveau/ https://lore.kernel.org/nouveau \
		nouveau@lists.freedesktop.org
	public-inbox-index nouveau

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.nouveau


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git