From: "Verma, Vishal L" <vishal.l.verma@intel.com>
To: "linux-nvdimm@lists.01.org" <linux-nvdimm@lists.01.org>,
"qi.fuli@jp.fujitsu.com" <qi.fuli@jp.fujitsu.com>
Subject: Re: [ndctl PATCH v11 3/5] ndctl, monitor: add the unit file of systemd for ndctl-monitor service
Date: Fri, 13 Jul 2018 02:46:58 +0000 [thread overview]
Message-ID: <1531450017.7574.107.camel@intel.com> (raw)
In-Reply-To: <20180711030012.9186-4-qi.fuli@jp.fujitsu.com>
On Wed, 2018-07-11 at 12:00 +0900, QI Fuli wrote:
> This patch adds the systemd unit file for ndctl-monitor service.
> The systemd unit directory can be configured by setting environment
> variable "--with-systemd-unit-dir[=DIR]".
>
> A monitor daemon can be started as a system service:
> # systemctl start ndctl-monitor.service
>
> Signed-off-by: QI Fuli <qi.fuli@jp.fujitsu.com>
> ---
> autogen.sh | 3 ++-
> configure.ac | 22 ++++++++++++++++++++++
> ndctl/Makefile.am | 4 ++++
> ndctl/ndctl-monitor.service | 7 +++++++
> 4 files changed, 35 insertions(+), 1 deletion(-)
> create mode 100644 ndctl/ndctl-monitor.service
We install the service unit file when doing a 'make install', but I
think this also needs an update to the RPM spec file so that RPM knows
about this too.
>
> diff --git a/autogen.sh b/autogen.sh
> index 2a52688..21b0e25 100755
> --- a/autogen.sh
> +++ b/autogen.sh
> @@ -17,7 +17,8 @@ libdir() {
>
> args="--prefix=/usr \
> --sysconfdir=/etc \
> ---libdir=$(libdir /usr/lib)"
> +--libdir=$(libdir /usr/lib) \
> +--with-systemd-unit-dir"
>
> echo
> echo "------------------------------------------------------------
> ----"
> diff --git a/configure.ac b/configure.ac
> index cf44260..a5ba9a1 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -143,6 +143,27 @@ AC_CHECK_FUNCS([ \
> secure_getenv\
> ])
>
> +PKG_PROG_PKG_CONFIG
> +AC_ARG_WITH([systemd-unit-dir],
> + AS_HELP_STRING([--with-systemd-unit-dir[=DIR]],
> + [Directory for systemd service files]),
> + [],
> + [with_systemd_unit_dir=yes])
> +
> +if test "x$with_systemd_unit_dir" = "xyes"; then
> + def_systemd_unit_dir=$($PKG_CONFIG --
> variable=systemdsystemunitdir systemd)
> + if test "x$def_systemd_unit_dir" = "x"; then
> + AC_MSG_ERROR([systemd support requested but pkg-
> config unable to query systemd package])
> + with_systemd_unit_dir=no
> + else
> + with_systemd_unit_dir="$def_systemd_unit_dir"
> + fi
> +fi
> +
> +AS_IF([test "x$with_systemd_unit_dir" != "xno"],
> + [AC_SUBST([systemd_unitdir], [$with_systemd_unit_dir])])
> +AM_CONDITIONAL([ENABLE_SYSTEMD_UNIT_DIR], [test
> "x$with_systemd_unit_dir" != "xno"])
> +
> my_CFLAGS="\
> -Wall \
> -Wchar-subscripts \
> @@ -184,6 +205,7 @@ AC_MSG_RESULT([
> sysconfdir: ${sysconfdir}
> libdir: ${libdir}
> includedir: ${includedir}
> + systemd-unit-dir: ${systemd_unitdir}
>
> compiler: ${CC}
> cflags: ${CFLAGS}
> diff --git a/ndctl/Makefile.am b/ndctl/Makefile.am
> index ae3d894..9d008d5 100644
> --- a/ndctl/Makefile.am
> +++ b/ndctl/Makefile.am
> @@ -47,3 +47,7 @@ monitor_config_file = monitor.conf
> monitor_configdir = /etc/ndctl/
> monitor_config_DATA = $(monitor_config_file)
> EXTRA_DIST += $(monitor_config_file)
> +
> +if ENABLE_SYSTEMD_UNIT_DIR
> +systemd_unit_DATA = ndctl-monitor.service
> +endif
> diff --git a/ndctl/ndctl-monitor.service b/ndctl/ndctl-
> monitor.service
> new file mode 100644
> index 0000000..44f9326
> --- /dev/null
> +++ b/ndctl/ndctl-monitor.service
> @@ -0,0 +1,7 @@
> +[Unit]
> +Description=Ndctl Monitor Daemon
> +
> +[Service]
> +Type=forking
> +ExecStart=/usr/bin/ndctl monitor --daemon
> +ExecStop=/bin/kill ${MAINPID}
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
next prev parent reply other threads:[~2018-07-13 2:48 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-11 3:00 [ndctl PATCH v11 0/5] ndctl, monitor: add ndctl monitor daemon QI Fuli
2018-07-11 3:00 ` [ndctl PATCH v11 1/5] ndctl, monitor: add a new command - monitor QI Fuli
2018-07-13 2:46 ` Verma, Vishal L
2018-07-11 3:00 ` [ndctl PATCH v11 2/5] ndctl, monitor: add main ndctl monitor configuration file QI Fuli
2018-07-11 3:00 ` [ndctl PATCH v11 3/5] ndctl, monitor: add the unit file of systemd for ndctl-monitor service QI Fuli
2018-07-13 2:46 ` Verma, Vishal L [this message]
2018-07-13 12:57 ` Qi, Fuli
2018-07-13 14:51 ` Masayoshi Mizuma
2018-07-11 3:00 ` [ndctl PATCH v11 4/5] ndctl, documentation: add manpage for monitor QI Fuli
2018-07-13 2:47 ` Verma, Vishal L
2018-07-11 3:00 ` [ndctl PATCH v11 5/5] ndctl, test: add a new unit test " QI Fuli
2018-07-12 19:51 ` Masayoshi Mizuma
2018-07-12 20:01 ` Verma, Vishal L
2018-07-13 1:44 ` Qi, Fuli
2018-07-13 2:46 ` [ndctl PATCH v11 0/5] ndctl, monitor: add ndctl monitor daemon Verma, Vishal L
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1531450017.7574.107.camel@intel.com \
--to=vishal.l.verma@intel.com \
--cc=linux-nvdimm@lists.01.org \
--cc=qi.fuli@jp.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).