nvdimm.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: linux-cxl@vger.kernel.org
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>,
	linux-pci@vger.kernel.org, nvdimm@lists.linux.dev
Subject: [PATCH v4 30/40] cxl/pci: Emit device serial number
Date: Mon, 31 Jan 2022 13:56:11 -0800	[thread overview]
Message-ID: <164366608838.196598.16856227191534267098.stgit@dwillia2-desk3.amr.corp.intel.com> (raw)
In-Reply-To: <164298427918.3018233.8524862534398549106.stgit@dwillia2-desk3.amr.corp.intel.com>

Per the CXL specification (8.1.12.2 Memory Device PCIe Capabilities and
Extended Capabilities) the Device Serial Number capability is mandatory.
Emit it for user tooling to identify devices.

It is reasonable to ask whether the attribute should be added to the
list of PCI sysfs device attributes. The PCI layer can optionally emit
it too, but the CXL subsystem is aiming to preserve its independence and
the possibility of CXL topologies with non-PCI devices in it. To date
that has only proven useful for the 'cxl_test' model, but as can be seen
with seen with ACPI0016 devices, sometimes all that is needed is a
platform firmware table to point to CXL Component Registers in MMIO
space to define a "CXL" device.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
Changes since v3:
- Fixup changelog to clarify why CXL is emitting this attribute
  regardless of whether PCI later emits it. (Jonathan)

 Documentation/ABI/testing/sysfs-bus-cxl |    9 +++++++++
 drivers/cxl/core/memdev.c               |   11 +++++++++++
 drivers/cxl/cxlmem.h                    |    2 ++
 drivers/cxl/pci.c                       |    1 +
 tools/testing/cxl/test/mem.c            |    1 +
 5 files changed, 24 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
index 6d8cbf3355b5..87c0e5e65322 100644
--- a/Documentation/ABI/testing/sysfs-bus-cxl
+++ b/Documentation/ABI/testing/sysfs-bus-cxl
@@ -25,6 +25,15 @@ Description:
 		identically named field in the Identify Memory Device Output
 		Payload in the CXL-2.0 specification.
 
+What:		/sys/bus/cxl/devices/memX/serial
+Date:		January, 2022
+KernelVersion:	v5.18
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) 64-bit serial number per the PCIe Device Serial Number
+		capability. Mandatory for CXL devices, see CXL 2.0 8.1.12.2
+		Memory Device PCIe Capabilities and Extended Capabilities.
+
 What:		/sys/bus/cxl/devices/*/devtype
 Date:		June, 2021
 KernelVersion:	v5.14
diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c
index 61029cb7ac62..1e574b052583 100644
--- a/drivers/cxl/core/memdev.c
+++ b/drivers/cxl/core/memdev.c
@@ -89,7 +89,18 @@ static ssize_t pmem_size_show(struct device *dev, struct device_attribute *attr,
 static struct device_attribute dev_attr_pmem_size =
 	__ATTR(size, 0444, pmem_size_show, NULL);
 
+static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+	struct cxl_dev_state *cxlds = cxlmd->cxlds;
+
+	return sysfs_emit(buf, "%#llx\n", cxlds->serial);
+}
+static DEVICE_ATTR_RO(serial);
+
 static struct attribute *cxl_memdev_attributes[] = {
+	&dev_attr_serial.attr,
 	&dev_attr_firmware_version.attr,
 	&dev_attr_payload_max.attr,
 	&dev_attr_label_storage_size.attr,
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index e70838e5dc17..0ba0cf8dcdbc 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -131,6 +131,7 @@ struct cxl_endpoint_dvsec_info {
  * @next_persistent_bytes: persistent capacity change pending device reset
  * @component_reg_phys: register base of component registers
  * @info: Cached DVSEC information about the device.
+ * @serial: PCIe Device Serial Number
  * @mbox_send: @dev specific transport for transmitting mailbox commands
  * @wait_media_ready: @dev specific method to await media ready
  *
@@ -164,6 +165,7 @@ struct cxl_dev_state {
 
 	resource_size_t component_reg_phys;
 	struct cxl_endpoint_dvsec_info info;
+	u64 serial;
 
 	int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd);
 	int (*wait_media_ready)(struct cxl_dev_state *cxlds);
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 513cb0e2a70a..9252e1f4b18c 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -557,6 +557,7 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (IS_ERR(cxlds))
 		return PTR_ERR(cxlds);
 
+	cxlds->serial = pci_get_dsn(pdev);
 	cxlds->cxl_dvsec = pci_find_dvsec_capability(
 		pdev, PCI_DVSEC_VENDOR_ID_CXL, CXL_DVSEC);
 	if (!cxlds->cxl_dvsec) {
diff --git a/tools/testing/cxl/test/mem.c b/tools/testing/cxl/test/mem.c
index 3af3f94de0c3..36ef337c775c 100644
--- a/tools/testing/cxl/test/mem.c
+++ b/tools/testing/cxl/test/mem.c
@@ -268,6 +268,7 @@ static int cxl_mock_mem_probe(struct platform_device *pdev)
 	if (IS_ERR(cxlds))
 		return PTR_ERR(cxlds);
 
+	cxlds->serial = pdev->id;
 	cxlds->mbox_send = cxl_mock_mbox_send;
 	cxlds->wait_media_ready = cxl_mock_wait_media_ready;
 	cxlds->payload_size = SZ_4K;


  parent reply	other threads:[~2022-01-31 21:56 UTC|newest]

Thread overview: 163+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-24  0:28 [PATCH v3 00/40] CXL.mem Topology Discovery and Hotplug Support Dan Williams
2022-01-24  0:28 ` [PATCH v3 01/40] cxl: Rename CXL_MEM to CXL_PCI Dan Williams
2022-01-24  0:28 ` [PATCH v3 02/40] cxl/pci: Implement Interface Ready Timeout Dan Williams
2022-01-31 22:21   ` Ben Widawsky
2022-01-31 23:11     ` Dan Williams
2022-01-31 23:25       ` Ben Widawsky
2022-01-31 23:47         ` Dan Williams
2022-01-31 23:51   ` [PATCH v4 " Dan Williams
2022-01-24  0:28 ` [PATCH v3 03/40] cxl/pci: Defer mailbox status checks to command timeouts Dan Williams
2022-01-31 22:28   ` Ben Widawsky
2022-01-24  0:29 ` [PATCH v3 04/40] cxl: Flesh out register names Dan Williams
2022-01-24  0:29 ` [PATCH v3 05/40] cxl/pci: Add new DVSEC definitions Dan Williams
2022-01-24  0:29 ` [PATCH v3 06/40] cxl/acpi: Map component registers for Root Ports Dan Williams
2022-01-24  0:29 ` [PATCH v3 07/40] cxl: Introduce module_cxl_driver Dan Williams
2022-01-24  0:29 ` [PATCH v3 08/40] cxl/core/port: Rename bus.c to port.c Dan Williams
2022-01-31 22:34   ` Ben Widawsky
2022-01-24  0:29 ` [PATCH v3 09/40] cxl/decoder: Hide physical address information from non-root Dan Williams
2022-01-31 14:14   ` Jonathan Cameron
2022-01-31 22:34   ` Ben Widawsky
2022-01-24  0:29 ` [PATCH v3 10/40] cxl/core: Convert decoder range to resource Dan Williams
2022-01-24  0:29 ` [PATCH v3 11/40] cxl/core/port: Clarify decoder creation Dan Williams
2022-01-31 14:46   ` Jonathan Cameron
2022-01-31 21:17     ` Dan Williams
2022-01-31 21:33   ` [PATCH v4 " Dan Williams
2022-02-01 10:49     ` Jonathan Cameron
2022-01-24  0:29 ` [PATCH v3 12/40] cxl/core: Fix cxl_probe_component_regs() error message Dan Williams
2022-01-31 14:53   ` Jonathan Cameron
2022-01-31 22:29     ` Dan Williams
2022-01-31 22:39   ` Ben Widawsky
2022-01-24  0:29 ` [PATCH v3 13/40] cxl/core/port: Make passthrough decoder init implicit Dan Williams
2022-01-31 14:56   ` Jonathan Cameron
2022-01-24  0:29 ` [PATCH v3 14/40] cxl/core: Track port depth Dan Williams
2022-01-31 14:57   ` Jonathan Cameron
2022-01-24  0:29 ` [PATCH v3 15/40] cxl: Prove CXL locking Dan Williams
2022-01-31 15:48   ` Jonathan Cameron
2022-01-31 19:43     ` Dan Williams
2022-01-31 19:50   ` [PATCH v4 " Dan Williams
2022-01-31 23:23     ` Ben Widawsky
2022-01-24  0:30 ` [PATCH v3 16/40] cxl/core/port: Use dedicated lock for decoder target list Dan Williams
2022-01-24  0:30 ` [PATCH v3 17/40] cxl/port: Introduce cxl_port_to_pci_bus() Dan Williams
2022-01-31 16:04   ` Jonathan Cameron
2022-01-31 16:44   ` [PATCH v4 " Dan Williams
2022-01-31 23:41     ` Ben Widawsky
2022-01-24  0:30 ` [PATCH v3 18/40] cxl/pmem: Introduce a find_cxl_root() helper Dan Williams
2022-01-26 18:55   ` [PATCH v4 " Dan Williams
2022-01-26 23:59     ` [PATCH v5 " Dan Williams
2022-01-31 16:18       ` Jonathan Cameron
2022-02-01  0:22         ` Dan Williams
2022-02-01 10:58           ` Jonathan Cameron
2022-02-01  0:34       ` [PATCH v6 " Dan Williams
2022-02-01 10:59         ` Jonathan Cameron
2022-01-24  0:30 ` [PATCH v3 19/40] cxl/port: Up-level cxl_add_dport() locking requirements to the caller Dan Williams
2022-01-31 16:20   ` Jonathan Cameron
2022-01-31 23:47   ` Ben Widawsky
2022-02-01  0:43     ` Dan Williams
2022-02-01  1:07   ` [PATCH v4 " Dan Williams
2022-02-01 11:00     ` Jonathan Cameron
2022-01-24  0:30 ` [PATCH v3 20/40] cxl/pci: Rename pci.h to cxlpci.h Dan Williams
2022-01-31 16:22   ` Jonathan Cameron
2022-02-01  0:00     ` Dan Williams
2022-01-31 23:48   ` Ben Widawsky
2022-01-24  0:30 ` [PATCH v3 21/40] cxl/core: Generalize dport enumeration in the core Dan Williams
2022-01-31 17:02   ` Jonathan Cameron
2022-02-01  1:58     ` Dan Williams
2022-02-01  2:10   ` [PATCH v4 " Dan Williams
2022-02-01 11:03     ` Jonathan Cameron
2022-01-24  0:30 ` [PATCH v3 22/40] cxl/core/hdm: Add CXL standard decoder enumeration to " Dan Williams
2022-01-26  3:09   ` [PATCH v4 " Dan Williams
2022-01-31 14:26     ` Jonathan Cameron
2022-01-31 17:51     ` Jonathan Cameron
2022-02-01  5:10       ` Dan Williams
2022-02-01 20:24     ` [PATCH v5 " Dan Williams
2022-02-02  9:31       ` Jonathan Cameron
2022-02-01  0:24   ` [PATCH v3 " Ben Widawsky
2022-02-01  4:58     ` Dan Williams
2022-01-24  0:30 ` [PATCH v3 23/40] cxl/core: Emit modalias for CXL devices Dan Williams
2022-01-31 17:57   ` Jonathan Cameron
2022-02-01 15:11   ` Ben Widawsky
2022-01-24  0:30 ` [PATCH v3 24/40] cxl/port: Add a driver for 'struct cxl_port' objects Dan Williams
2022-01-26 20:16   ` [PATCH v4 " Dan Williams
2022-01-31 18:11     ` Jonathan Cameron
2022-02-01 20:43       ` Dan Williams
2022-02-02  9:33         ` Jonathan Cameron
2022-02-01 21:07     ` [PATCH v5 " Dan Williams
2022-01-24  0:30 ` [PATCH v3 25/40] cxl/core/port: Remove @host argument for dport + decoder enumeration Dan Williams
2022-01-31 14:32   ` Jonathan Cameron
2022-01-31 18:14   ` Jonathan Cameron
2022-02-01 15:17   ` Ben Widawsky
2022-02-01 21:09     ` Dan Williams
2022-02-01 21:23   ` [PATCH v4 " Dan Williams
2022-01-24  0:30 ` [PATCH v3 26/40] cxl/pci: Store component register base in cxlds Dan Williams
2022-01-31 18:15   ` Jonathan Cameron
2022-02-01 21:28   ` [PATCH v4 " Dan Williams
2022-01-24  0:31 ` [PATCH v3 27/40] cxl/pci: Cache device DVSEC offset Dan Williams
2022-01-31 18:19   ` Jonathan Cameron
2022-02-01 15:24     ` Ben Widawsky
2022-02-01 21:41       ` Dan Williams
2022-02-01 22:11         ` Ben Widawsky
2022-02-01 22:15           ` Dan Williams
2022-02-01 22:20             ` Ben Widawsky
2022-02-01 22:24               ` Dan Williams
2022-02-02  9:36                 ` Jonathan Cameron
2022-02-01 22:06   ` [PATCH v4 " Dan Williams
2022-02-02  9:36     ` Jonathan Cameron
2022-01-24  0:31 ` [PATCH v3 28/40] cxl/pci: Retrieve CXL DVSEC memory info Dan Williams
2022-01-31 18:25   ` Jonathan Cameron
2022-02-01 22:52     ` Dan Williams
2022-02-01 23:48   ` [PATCH v4 " Dan Williams
2022-02-02  9:39     ` Jonathan Cameron
2022-01-24  0:31 ` [PATCH v3 29/40] cxl/pci: Implement wait for media active Dan Williams
2022-01-31 18:29   ` Jonathan Cameron
2022-02-01 23:56     ` Dan Williams
2022-01-24  0:31 ` [PATCH v3 30/40] cxl/pci: Emit device serial number Dan Williams
2022-01-31 18:33   ` Jonathan Cameron
2022-01-31 21:43     ` Dan Williams
2022-01-31 21:56   ` Dan Williams [this message]
2022-01-24  0:31 ` [PATCH v3 31/40] cxl/memdev: Add numa_node attribute Dan Williams
2022-01-31 18:41   ` Jonathan Cameron
2022-02-01 23:57     ` Dan Williams
2022-02-02  9:44       ` Jonathan Cameron
2022-02-02 15:44         ` Dan Williams
2022-02-03  9:41           ` Jonathan Cameron
2022-02-03 16:59             ` Dan Williams
2022-02-03 18:05               ` Jonathan Cameron
2022-02-04  4:25                 ` Dan Williams
2022-02-01 15:31   ` Ben Widawsky
2022-02-01 15:49     ` Jonathan Cameron
2022-02-01 16:35       ` Ben Widawsky
2022-02-01 17:38         ` Jonathan Cameron
2022-02-01 23:59     ` Dan Williams
2022-02-02  1:18     ` Dan Williams
2022-01-24  0:31 ` [PATCH v3 32/40] cxl/core/port: Add switch port enumeration Dan Williams
2022-02-01 12:13   ` Jonathan Cameron
2022-02-02  5:26     ` Dan Williams
2022-02-01 17:37   ` Ben Widawsky
2022-02-02  6:03     ` Dan Williams
2022-02-02 17:07   ` [PATCH v4 " Dan Williams
2022-02-03  9:55     ` Jonathan Cameron
2022-02-04 15:08     ` [PATCH v5 " Dan Williams
2022-01-24  0:31 ` [PATCH v3 33/40] cxl/mem: Add the cxl_mem driver Dan Williams
2022-01-26  3:16   ` [PATCH v4 " Dan Williams
2022-02-01 12:45     ` Jonathan Cameron
2022-02-01 17:44       ` Ben Widawsky
2022-02-03  2:49       ` Dan Williams
2022-02-03  9:59         ` Jonathan Cameron
2022-02-04 14:54           ` Dan Williams
2022-02-03  3:56     ` [PATCH v5 " Dan Williams
2022-02-03 12:07       ` Jonathan Cameron
2022-02-04 15:18       ` [PATCH v6 " Dan Williams
2022-01-24  0:31 ` [PATCH v3 34/40] cxl/core: Move target_list out of base decoder attributes Dan Williams
2022-01-31 18:45   ` Jonathan Cameron
2022-02-01 17:45   ` Ben Widawsky
2022-01-24  0:31 ` [PATCH v3 35/40] cxl/core/port: Add endpoint decoders Dan Williams
2022-02-01 12:47   ` Jonathan Cameron
2022-02-03  4:02   ` [PATCH v4 " Dan Williams
2022-02-14 17:45     ` Jonathan Cameron
2022-02-14 19:14       ` Dan Williams
2022-01-24  0:31 ` [PATCH v3 36/40] tools/testing/cxl: Mock dvsec_ranges() Dan Williams
2022-01-24  0:31 ` [PATCH v3 37/40] tools/testing/cxl: Fix root port to host bridge assignment Dan Williams
2022-01-24  0:32 ` [PATCH v3 38/40] tools/testing/cxl: Mock one level of switches Dan Williams
2022-01-24  0:32 ` [PATCH v3 39/40] tools/testing/cxl: Enumerate mock decoders Dan Williams
2022-01-24  0:32 ` [PATCH v3 40/40] tools/testing/cxl: Add a physical_node link Dan Williams
2022-02-01 12:53   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=164366608838.196598.16856227191534267098.stgit@dwillia2-desk3.amr.corp.intel.com \
    --to=dan.j.williams@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=nvdimm@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).