From: Vaibhav Jain <vaibhav@linux.ibm.com>
To: nvdimm@lists.linux.dev
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>,
Dan Williams <dan.j.williams@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
"Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>,
Ira Weiny <ira.weiny@intel.com>,
Shivaprasad G Bhat <sbhat@linux.ibm.com>
Subject: [ndctl PATCH v2] libndctl: Update nvdimm flags after in ndctl_cmd_submit()
Date: Fri, 16 Jul 2021 12:51:04 +0530 [thread overview]
Message-ID: <20210716072104.11808-1-vaibhav@linux.ibm.com> (raw)
Presently after performing an inject-smart the nvdimm flags reported are out of
date as shown below where no 'smart_notify' or 'flush_fail' flags were reported
even though they are set after injecting the smart error:
$ sudo inject-smart -fU nmem0
[
{
"dev":"nmem0",
"health":{
"health_state":"fatal",
"shutdown_state":"dirty",
"shutdown_count":0
}
}
]
$ sudo cat /sys/class/nd/ndctl0/device/nmem0/papr/flags
flush_fail smart_notify
This happens because nvdimm flags are only parsed once during its probe and
not refreshed even after a inject-smart operation makes them out of
date. To fix this the patch forces an update of nvdimm flags via newly
introduced ndctl_refresh_dimm_flags() thats called successfully submitting
a 'struct ndctl_cmd' in ndctl_cmd_submit(). This ensures that correct
nvdimm flags are reported after an interaction with the kernel module which
may trigger a change nvdimm-flags. With this implemented correct nvdimm
flags are reported after a inject-smart operation:
$ sudo ndctl inject-smart -fU nmem0
[
{
"dev":"nmem0",
"flag_failed_flush":true,
"flag_smart_event":true,
"health":{
"health_state":"fatal",
"shutdown_state":"dirty",
"shutdown_count":0
}
}
]
The patch refactors populate_dimm_attributes() to move the nvdimm flags
parsing code to the newly introduced ndctl_refresh_dimm_flags()
export. Since reading nvdimm flags requires constructing path using
'bus_prefix' which is only available during add_dimm(), the patch
introduces a new member 'struct ndctl_dimm.bus_prefix' to cache its
value. During ndctl_refresh_dimm_flags() the cached bus_prefix is used to
read the contents of the nvdimm flag file and pass it on to the appropriate
flag parsing function. Finally ndctl_refresh_dimm_flags() is invoked at the
end of ndctl_cmd_submit() if nd-command submission succeeds.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
---
Changelog:
Since v1:
Link: https://lore.kernel.org/nvdimm/20210713202523.190113-1-vaibhav@linux.ibm.com
* Remove the export of ndctl_refresh_dimm_flags().
* Remove the call to ndctl_refresh_dimm_flags() from dimm_inject_smart().
* Add call to ndctl_refresh_dimm_flags() at end of ndctl_cmd_submit().
---
ndctl/lib/libndctl.c | 49 +++++++++++++++++++++++++++++++-------------
ndctl/lib/private.h | 1 +
ndctl/libndctl.h | 1 +
3 files changed, 37 insertions(+), 14 deletions(-)
diff --git a/ndctl/lib/libndctl.c b/ndctl/lib/libndctl.c
index bb0ea094a153..20eecbe5ca2c 100644
--- a/ndctl/lib/libndctl.c
+++ b/ndctl/lib/libndctl.c
@@ -588,6 +588,7 @@ static void free_dimm(struct ndctl_dimm *dimm)
free(dimm->unique_id);
free(dimm->dimm_buf);
free(dimm->dimm_path);
+ free(dimm->bus_prefix);
if (dimm->module)
kmod_module_unref(dimm->module);
if (dimm->health_eventfd > -1)
@@ -1650,14 +1651,34 @@ static int ndctl_bind(struct ndctl_ctx *ctx, struct kmod_module *module,
static int ndctl_unbind(struct ndctl_ctx *ctx, const char *devpath);
static struct kmod_module *to_module(struct ndctl_ctx *ctx, const char *alias);
+void ndctl_refresh_dimm_flags(struct ndctl_dimm *dimm)
+{
+ struct ndctl_ctx *ctx = dimm->bus->ctx;
+ char *path = dimm->dimm_buf;
+ char buf[SYSFS_ATTR_SIZE];
+
+ /* Construct path to dimm flags sysfs file */
+ sprintf(path, "%s/%s/flags", dimm->dimm_path, dimm->bus_prefix);
+
+ if (sysfs_read_attr(ctx, path, buf) < 0)
+ return;
+
+ /* Reset the flags */
+ dimm->flags.flags = 0;
+ if (ndctl_bus_has_nfit(dimm->bus))
+ parse_nfit_mem_flags(dimm, buf);
+ else if (ndctl_bus_is_papr_scm(dimm->bus))
+ parse_papr_flags(dimm, buf);
+}
+
static int populate_dimm_attributes(struct ndctl_dimm *dimm,
- const char *dimm_base,
- const char *bus_prefix)
+ const char *dimm_base)
{
int i, rc = -1;
char buf[SYSFS_ATTR_SIZE];
struct ndctl_ctx *ctx = dimm->bus->ctx;
char *path = calloc(1, strlen(dimm_base) + 100);
+ const char *bus_prefix = dimm->bus_prefix;
if (!path)
return -ENOMEM;
@@ -1740,15 +1761,7 @@ static int populate_dimm_attributes(struct ndctl_dimm *dimm,
dimm->format[i] = strtoul(buf, NULL, 0);
}
- sprintf(path, "%s/%s/flags", dimm_base, bus_prefix);
- if (sysfs_read_attr(ctx, path, buf) == 0) {
- if (ndctl_bus_has_nfit(dimm->bus))
- parse_nfit_mem_flags(dimm, buf);
- else if (ndctl_bus_is_papr_scm(dimm->bus)) {
- dimm->cmd_family = NVDIMM_FAMILY_PAPR;
- parse_papr_flags(dimm, buf);
- }
- }
+ ndctl_refresh_dimm_flags(dimm);
dimm->health_eventfd = open(path, O_RDONLY|O_CLOEXEC);
rc = 0;
@@ -1807,7 +1820,7 @@ static int add_papr_dimm(struct ndctl_dimm *dimm, const char *dimm_base)
rc = 0;
} else if (strcmp(buf, "nvdimm_test") == 0) {
/* probe via common populate_dimm_attributes() */
- rc = populate_dimm_attributes(dimm, dimm_base, "papr");
+ rc = populate_dimm_attributes(dimm, dimm_base);
}
out:
free(path);
@@ -1904,9 +1917,13 @@ static void *add_dimm(void *parent, int id, const char *dimm_base)
dimm->formats = formats;
/* Check if the given dimm supports nfit */
if (ndctl_bus_has_nfit(bus)) {
- rc = populate_dimm_attributes(dimm, dimm_base, "nfit");
+ dimm->bus_prefix = strdup("nfit");
+ rc = dimm->bus_prefix ?
+ populate_dimm_attributes(dimm, dimm_base) : -ENOMEM;
} else if (ndctl_bus_has_of_node(bus)) {
- rc = add_papr_dimm(dimm, dimm_base);
+ dimm->bus_prefix = strdup("papr");
+ rc = dimm->bus_prefix ?
+ add_papr_dimm(dimm, dimm_base) : -ENOMEM;
}
if (rc == -ENODEV) {
@@ -3486,6 +3503,10 @@ NDCTL_EXPORT int ndctl_cmd_submit(struct ndctl_cmd *cmd)
rc = -ENXIO;
}
close(fd);
+
+ /* update dimm-flags if command submitted successfully */
+ if (!rc)
+ ndctl_refresh_dimm_flags(cmd->dimm);
out:
cmd->status = rc;
return rc;
diff --git a/ndctl/lib/private.h b/ndctl/lib/private.h
index 8f4510e562c4..a4b920ca0c94 100644
--- a/ndctl/lib/private.h
+++ b/ndctl/lib/private.h
@@ -75,6 +75,7 @@ struct ndctl_dimm {
char *unique_id;
char *dimm_path;
char *dimm_buf;
+ char *bus_prefix;
int health_eventfd;
int buf_len;
int id;
diff --git a/ndctl/libndctl.h b/ndctl/libndctl.h
index 87d07b74ef8b..cdadd5fd4548 100644
--- a/ndctl/libndctl.h
+++ b/ndctl/libndctl.h
@@ -214,6 +214,7 @@ int ndctl_dimm_is_active(struct ndctl_dimm *dimm);
int ndctl_dimm_is_enabled(struct ndctl_dimm *dimm);
int ndctl_dimm_disable(struct ndctl_dimm *dimm);
int ndctl_dimm_enable(struct ndctl_dimm *dimm);
+void ndctl_refresh_dimm_flags(struct ndctl_dimm *dimm);
struct ndctl_cmd;
struct ndctl_cmd *ndctl_bus_cmd_new_ars_cap(struct ndctl_bus *bus,
--
2.31.1
reply other threads:[~2021-07-16 7:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210716072104.11808-1-vaibhav@linux.ibm.com \
--to=vaibhav@linux.ibm.com \
--cc=aneesh.kumar@linux.ibm.com \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=nvdimm@lists.linux.dev \
--cc=sbhat@linux.ibm.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).