ocfs2-devel.oss.oracle.com archive mirror
 help / color / mirror / Atom feed
From: Shiyang Ruan <ruansy.fnst@fujitsu.com>
To: <linux-kernel@vger.kernel.org>, <linux-xfs@vger.kernel.org>,
	<linux-nvdimm@lists.01.org>, <linux-fsdevel@vger.kernel.org>
Cc: jack@suse.cz, darrick.wong@oracle.com, david@fromorbit.com,
	ocfs2-devel@oss.oracle.com, viro@zeniv.linux.org.uk,
	dan.j.williams@intel.com, linux-btrfs@vger.kernel.org
Subject: [Ocfs2-devel] [PATCH v3 04/10] fsdax: Introduce dax_iomap_cow_copy()
Date: Fri, 19 Mar 2021 09:52:31 +0800	[thread overview]
Message-ID: <20210319015237.993880-5-ruansy.fnst@fujitsu.com> (raw)
In-Reply-To: <20210319015237.993880-1-ruansy.fnst@fujitsu.com>

In the case where the iomap is a write operation and iomap is not equal
to srcmap after iomap_begin, we consider it is a CoW operation.

The destance extent which iomap indicated is new allocated extent.
So, it is needed to copy the data from srcmap to new allocated extent.
In theory, it is better to copy the head and tail ranges which is
outside of the non-aligned area instead of copying the whole aligned
range. But in dax page fault, it will always be an aligned range.  So,
we have to copy the whole range in this case.

Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/dax.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 66 insertions(+), 5 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index a70e6aa285bb..181aad97136a 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -1037,6 +1037,51 @@ static int dax_iomap_direct_access(struct iomap *iomap, loff_t pos, size_t size,
 	return rc;
 }
 
+/*
+ * Copy the head and tail part of the pages not included in the write but
+ * required for CoW, because pos/pos+length are not page aligned.  But in dax
+ * page fault case, the range is page aligned, we need to copy the whole range
+ * of data.  Use copy_edge to distinguish these cases.
+ */
+static int dax_iomap_cow_copy(loff_t pos, loff_t length, size_t align_size,
+		struct iomap *srcmap, void *daddr, bool copy_edge)
+{
+	loff_t head_off = pos & (align_size - 1);
+	size_t size = ALIGN(head_off + length, align_size);
+	loff_t end = pos + length;
+	loff_t pg_end = round_up(end, align_size);
+	void *saddr = 0;
+	int ret = 0;
+
+	ret = dax_iomap_direct_access(srcmap, pos, size, &saddr, NULL);
+	if (ret)
+		return ret;
+
+	if (!copy_edge)
+		return copy_mc_to_kernel(daddr, saddr, length);
+
+	/* Copy the head part of the range.  Note: we pass offset as length. */
+	if (head_off) {
+		if (saddr)
+			ret = copy_mc_to_kernel(daddr, saddr, head_off);
+		else
+			memset(daddr, 0, head_off);
+	}
+	/* Copy the tail part of the range */
+	if (end < pg_end) {
+		loff_t tail_off = head_off + length;
+		loff_t tail_len = pg_end - end;
+
+		if (saddr)
+			ret = copy_mc_to_kernel(daddr + tail_off,
+					saddr + tail_off, tail_len);
+		else
+			memset(daddr + tail_off, 0, tail_len);
+	}
+
+	return ret;
+}
+
 /*
  * The user has performed a load from a hole in the file.  Allocating a new
  * page in the file would cause excessive storage usage for workloads with
@@ -1166,11 +1211,12 @@ dax_iomap_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
 	struct dax_device *dax_dev = iomap->dax_dev;
 	struct iov_iter *iter = data;
 	loff_t end = pos + length, done = 0;
+	bool write = iov_iter_rw(iter) == WRITE;
 	ssize_t ret = 0;
 	size_t xfer;
 	int id;
 
-	if (iov_iter_rw(iter) == READ) {
+	if (!write) {
 		end = min(end, i_size_read(inode));
 		if (pos >= end)
 			return 0;
@@ -1179,7 +1225,8 @@ dax_iomap_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
 			return iov_iter_zero(min(length, end - pos), iter);
 	}
 
-	if (WARN_ON_ONCE(iomap->type != IOMAP_MAPPED))
+	if (WARN_ON_ONCE(iomap->type != IOMAP_MAPPED &&
+			!(iomap->flags & IOMAP_F_SHARED)))
 		return -EIO;
 
 	/*
@@ -1218,6 +1265,13 @@ dax_iomap_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
 			break;
 		}
 
+		if (write && srcmap->addr != iomap->addr) {
+			ret = dax_iomap_cow_copy(pos, length, PAGE_SIZE, srcmap,
+						 kaddr, true);
+			if (ret)
+				break;
+		}
+
 		map_len = PFN_PHYS(map_len);
 		kaddr += offset;
 		map_len -= offset;
@@ -1229,7 +1283,7 @@ dax_iomap_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
 		 * validated via access_ok() in either vfs_read() or
 		 * vfs_write(), depending on which operation we are doing.
 		 */
-		if (iov_iter_rw(iter) == WRITE)
+		if (write)
 			xfer = dax_copy_from_iter(dax_dev, pgoff, kaddr,
 					map_len, iter);
 		else
@@ -1379,6 +1433,7 @@ static vm_fault_t dax_fault_actor(struct vm_fault *vmf, pfn_t *pfnp,
 	bool sync = dax_fault_is_synchronous(flags, vmf->vma, iomap);
 	int err = 0;
 	pfn_t pfn;
+	void *kaddr;
 
 	/* if we are reading UNWRITTEN and HOLE, return a hole. */
 	if (!write &&
@@ -1389,18 +1444,24 @@ static vm_fault_t dax_fault_actor(struct vm_fault *vmf, pfn_t *pfnp,
 			return dax_pmd_load_hole(xas, vmf, iomap, &entry);
 	}
 
-	if (iomap->type != IOMAP_MAPPED) {
+	if (iomap->type != IOMAP_MAPPED && !(iomap->flags & IOMAP_F_SHARED)) {
 		WARN_ON_ONCE(1);
 		return VM_FAULT_SIGBUS;
 	}
 
-	err = dax_iomap_direct_access(iomap, pos, size, NULL, &pfn);
+	err = dax_iomap_direct_access(iomap, pos, size, &kaddr, &pfn);
 	if (err)
 		return dax_fault_return(err);
 
 	entry = dax_insert_entry(xas, mapping, vmf, entry, pfn, 0,
 				 write && !sync);
 
+	if (write && srcmap->addr != iomap->addr) {
+		err = dax_iomap_cow_copy(pos, size, size, srcmap, kaddr, false);
+		if (err)
+			return dax_fault_return(err);
+	}
+
 	if (sync)
 		return dax_fault_synchronous_pfnp(pfnp, pfn);
 
-- 
2.30.1




_______________________________________________
Ocfs2-devel mailing list
Ocfs2-devel@oss.oracle.com
https://oss.oracle.com/mailman/listinfo/ocfs2-devel

  parent reply	other threads:[~2021-03-19  1:53 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-19  1:52 [Ocfs2-devel] [PATCH v3 00/10] fsdax, xfs: Add reflink&dedupe support for fsdax Shiyang Ruan
2021-03-19  1:52 ` [Ocfs2-devel] [PATCH v3 01/10] fsdax: Factor helpers to simplify dax fault code Shiyang Ruan
2021-03-23 15:33   ` Ritesh Harjani
2021-03-19  1:52 ` [Ocfs2-devel] [PATCH v3 02/10] fsdax: Factor helper: dax_fault_actor() Shiyang Ruan
2021-03-23 15:48   ` Ritesh Harjani
2021-03-31  3:57     ` ruansy.fnst
2021-04-02  7:47   ` Christoph Hellwig
2021-03-19  1:52 ` [Ocfs2-devel] [PATCH v3 03/10] fsdax: Output address in dax_iomap_pfn() and rename it Shiyang Ruan
2021-03-23 15:54   ` Ritesh Harjani
2021-03-19  1:52 ` Shiyang Ruan [this message]
2021-03-23 16:08   ` [Ocfs2-devel] [PATCH v3 04/10] fsdax: Introduce dax_iomap_cow_copy() Ritesh Harjani
2021-03-19  1:52 ` [Ocfs2-devel] [PATCH v3 05/10] fsdax: Replace mmap entry in case of CoW Shiyang Ruan
2021-04-01  6:39   ` Ritesh Harjani
2021-04-01  7:03     ` ruansy.fnst
2021-03-19  1:52 ` [Ocfs2-devel] [PATCH v3 06/10] fsdax: Add dax_iomap_cow_copy() for dax_iomap_zero Shiyang Ruan
2021-04-01  6:45   ` Ritesh Harjani
2021-04-01  7:00     ` ruansy.fnst
2021-03-19  1:52 ` [Ocfs2-devel] [PATCH v3 07/10] iomap: Introduce iomap_apply2() for operations on two files Shiyang Ruan
2021-04-01  7:12   ` Ritesh Harjani
2021-03-19  1:52 ` [Ocfs2-devel] [PATCH v3 08/10] fsdax: Dedup file range to use a compare function Shiyang Ruan
2021-04-01 11:11   ` Ritesh Harjani
2021-04-08  3:21     ` ruansy.fnst
2021-03-19  1:52 ` [Ocfs2-devel] [PATCH v3 09/10] fs/xfs: Handle CoW for fsdax write() path Shiyang Ruan
2021-03-19  1:52 ` [Ocfs2-devel] [PATCH v3 10/10] fs/xfs: Add dedupe support for fsdax Shiyang Ruan
2021-03-23 15:27 ` [Ocfs2-devel] [PATCH v3 00/10] fsdax, xfs: Add reflink&dedupe " Ritesh Harjani
2021-04-02  7:49 ` Christoph Hellwig
2021-04-02  8:18   ` ruansy.fnst

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210319015237.993880-5-ruansy.fnst@fujitsu.com \
    --to=ruansy.fnst@fujitsu.com \
    --cc=dan.j.williams@intel.com \
    --cc=darrick.wong@oracle.com \
    --cc=david@fromorbit.com \
    --cc=jack@suse.cz \
    --cc=linux-btrfs@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=linux-xfs@vger.kernel.org \
    --cc=ocfs2-devel@oss.oracle.com \
    --cc=viro@zeniv.linux.org.uk \
    --subject='Re: [Ocfs2-devel] [PATCH v3 04/10] fsdax: Introduce dax_iomap_cow_copy()' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).