From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Joel Stanley <joel@jms.id.au>
Cc: linux-aspeed@lists.ozlabs.org, openbmc@lists.ozlabs.org,
devicetree@vger.kernel.org, Andrew Jeffery <andrew@aj.id.au>,
linux-kernel@vger.kernel.org,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: [PATCH 14/14] arm: dts: OpenPower Palmetto system can use coprocessor for FSI
Date: Wed, 27 Jun 2018 09:26:05 +1000 [thread overview]
Message-ID: <20180626232605.13420-15-benh@kernel.crashing.org> (raw)
In-Reply-To: <20180626232605.13420-1-benh@kernel.crashing.org>
This switches away from userspace bitbanging to kernel FSI
using the coprocessor.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 31 ++++++++++++++-----
1 file changed, 24 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index e6095f51ecf5..ba49b812e0bd 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -31,6 +31,11 @@
no-map;
reg = <0x98000000 0x01000000>; /* 16MB */
};
+
+ coldfire_memory: codefire_memory@5ee00000 {
+ reg = <0x5ee00000 0x00200000>;
+ no-map;
+ };
};
leds {
@@ -49,6 +54,25 @@
};
};
+ fsi: gpio-fsi {
+ compatible = "ibm,fsi-master-ast2400-cf", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ memory-region = <&coldfire_memory>;
+ sram = <&sram>;
+ cvic = <&cvic>;
+
+ fw-name = "palmetto";
+ fw-platform-sig = <0x5061>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
@@ -323,13 +347,6 @@
line-name = "SYS_PWROK_BMC";
};
- pin_gpio_h6 {
- gpio-hog;
- gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "SCM1_FSI0_DATA_EN";
- };
-
pin_gpio_h7 {
gpio-hog;
gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
--
2.17.1
next prev parent reply other threads:[~2018-06-27 0:49 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-26 23:25 [PATCH 00/14] fsi: Fixes and Coldfire coprocessor offload Benjamin Herrenschmidt
2018-06-26 23:25 ` [PATCH 01/14] devres: Add devm_of_iomap() Benjamin Herrenschmidt
2018-06-26 23:25 ` [PATCH 02/14] fsi: Move code around to avoid forward declaration Benjamin Herrenschmidt
2018-06-26 23:25 ` [PATCH 03/14] fsi: Add mechanism to set the tSendDelay and tEchoDelay values Benjamin Herrenschmidt
2018-06-28 4:10 ` Joel Stanley
2018-06-26 23:25 ` [PATCH 04/14] fsi: master-gpio: Rename and adjust send delay Benjamin Herrenschmidt
2018-06-26 23:25 ` [PATCH 05/14] fsi: master-gpio: Add support for link_config Benjamin Herrenschmidt
2018-06-28 4:11 ` Joel Stanley
2018-06-26 23:25 ` [PATCH 06/14] fsi: master-gpio: Add more tracepoints Benjamin Herrenschmidt
2018-06-28 4:11 ` Joel Stanley
2018-07-12 2:01 ` Benjamin Herrenschmidt
2018-06-26 23:25 ` [PATCH 07/14] fsi: master-gpio: Remove unused definitions Benjamin Herrenschmidt
2018-06-28 4:11 ` Joel Stanley
2018-06-26 23:25 ` [PATCH 08/14] fsi: master-gpio: Remove "GPIO" prefix on some definitions Benjamin Herrenschmidt
2018-06-28 4:11 ` Joel Stanley
2018-06-26 23:26 ` [PATCH 09/14] fsi: master-gpio: Add missing release function Benjamin Herrenschmidt
2018-06-28 4:12 ` Joel Stanley
2018-06-26 23:26 ` [PATCH 10/14] fsi: Move various master definitions to a common header Benjamin Herrenschmidt
2018-06-28 4:12 ` Joel Stanley
2018-06-26 23:26 ` [PATCH 11/14] dt-bindings: fsi: Document binding for the fsi-master-ast-cf "device" Benjamin Herrenschmidt
2018-06-28 4:12 ` Joel Stanley
2018-07-03 22:30 ` Rob Herring
2018-07-04 1:16 ` Benjamin Herrenschmidt
2018-07-05 16:08 ` Rob Herring
2018-07-07 1:50 ` Benjamin Herrenschmidt
2018-06-26 23:26 ` [PATCH 12/14] fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire Benjamin Herrenschmidt
2018-06-28 5:03 ` Joel Stanley
2018-06-26 23:26 ` [PATCH 13/14] arm: dts: OpenPower Romulus system can use coprocessor for FSI Benjamin Herrenschmidt
2018-06-28 4:12 ` Joel Stanley
2018-06-26 23:26 ` Benjamin Herrenschmidt [this message]
2018-06-28 4:13 ` [PATCH 14/14] arm: dts: OpenPower Palmetto " Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180626232605.13420-15-benh@kernel.crashing.org \
--to=benh@kernel.crashing.org \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).