From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
To: Brendan Higgins <brendanhiggins@google.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>,
linux-i2c@vger.kernel.org, openbmc@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>,
James Feist <james.feist@linux.intel.com>,
Vernon Mauery <vernon.mauery@linux.intel.com>,
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Subject: [PATCH] i2c: aspeed: Adjust spinlock scope in the irq handler
Date: Mon, 2 Jul 2018 14:40:11 -0700 [thread overview]
Message-ID: <20180702214011.16071-1-jae.hyun.yoo@linux.intel.com> (raw)
This patch adjusts spinlock scope to make it wrap the whole irq
handler using a single lock/unlock which covers both master and
slave handlers.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
---
drivers/i2c/busses/i2c-aspeed.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 60e4d0e939a3..9f02aa959a3e 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -234,7 +234,6 @@ static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
bool irq_handled = true;
u8 value;
- spin_lock(&bus->lock);
if (!slave) {
irq_handled = false;
goto out;
@@ -325,7 +324,6 @@ static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
writel(status_ack, bus->base + ASPEED_I2C_INTR_STS_REG);
out:
- spin_unlock(&bus->lock);
return irq_handled;
}
#endif /* CONFIG_I2C_SLAVE */
@@ -389,7 +387,6 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
u8 recv_byte;
int ret;
- spin_lock(&bus->lock);
irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
/* Ack all interrupt bits. */
writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG);
@@ -547,22 +544,29 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
dev_err(bus->dev,
"irq handled != irq. expected 0x%08x, but was 0x%08x\n",
irq_status, status_ack);
- spin_unlock(&bus->lock);
return !!irq_status;
}
static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
{
struct aspeed_i2c_bus *bus = dev_id;
+ bool ret;
+
+ spin_lock(&bus->lock);
#if IS_ENABLED(CONFIG_I2C_SLAVE)
if (aspeed_i2c_slave_irq(bus)) {
dev_dbg(bus->dev, "irq handled by slave.\n");
- return IRQ_HANDLED;
+ ret = true;
+ goto out;
}
#endif /* CONFIG_I2C_SLAVE */
- return aspeed_i2c_master_irq(bus) ? IRQ_HANDLED : IRQ_NONE;
+ ret = aspeed_i2c_master_irq(bus);
+
+out:
+ spin_unlock(&bus->lock);
+ return ret ? IRQ_HANDLED : IRQ_NONE;
}
static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
--
2.17.1
next reply other threads:[~2018-07-02 21:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-02 21:40 Jae Hyun Yoo [this message]
2018-07-12 8:41 ` [PATCH] i2c: aspeed: Adjust spinlock scope in the irq handler Brendan Higgins
2018-07-13 19:21 ` Jae Hyun Yoo
2018-07-13 20:33 ` Wolfram Sang
2018-07-13 20:37 ` Jae Hyun Yoo
2018-07-20 22:29 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180702214011.16071-1-jae.hyun.yoo@linux.intel.com \
--to=jae.hyun.yoo@linux.intel.com \
--cc=andrew@aj.id.au \
--cc=benh@kernel.crashing.org \
--cc=brendanhiggins@google.com \
--cc=james.feist@linux.intel.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=vernon.mauery@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).