* [PATCH linux dev-5.8 v2 0/2] Add Bytedance g220a BMC machine
@ 2020-09-28 9:45 John Wang
2020-09-28 9:45 ` [PATCH linux dev-5.8 v2 1/2] ARM: dts: Add 64MiB OpenBMC flash layout John Wang
2020-09-28 9:45 ` [PATCH linux dev-5.8 v2 2/2] ARM: dts: aspeed: Add Bytedance g220a BMC machine John Wang
0 siblings, 2 replies; 3+ messages in thread
From: John Wang @ 2020-09-28 9:45 UTC (permalink / raw)
To: openbmc, joel
This patchset introduces a 64M flash-layout, which is used by the G220A.
In the openbmc project, if we want to use this 64M flash-layout, we
need to add fowllowing lines in the machine configuraion file.
FLASH_SIZE = "65536"
FLASH_ROFS_OFFSET = "5632"
FLASH_RWFS_OFFSET = "49152"
In this layout, kernel's offset is 0x80000, the same as the 32M layout
(most of the ast2500 use it), So we do not have to care about the kernel
offset
John Wang (1):
ARM: dts: Add 64MiB OpenBMC flash layout
Lotus Xu (1):
ARM: dts: aspeed: Add Bytedance g220a BMC machine
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/aspeed-bmc-bytedance-g220a.dts | 919 ++++++++++++++++++
.../arm/boot/dts/openbmc-flash-layout-64.dtsi | 35 +
3 files changed, 955 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
create mode 100644 arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
--
2.25.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH linux dev-5.8 v2 1/2] ARM: dts: Add 64MiB OpenBMC flash layout
2020-09-28 9:45 [PATCH linux dev-5.8 v2 0/2] Add Bytedance g220a BMC machine John Wang
@ 2020-09-28 9:45 ` John Wang
2020-09-28 9:45 ` [PATCH linux dev-5.8 v2 2/2] ARM: dts: aspeed: Add Bytedance g220a BMC machine John Wang
1 sibling, 0 replies; 3+ messages in thread
From: John Wang @ 2020-09-28 9:45 UTC (permalink / raw)
To: openbmc, joel
This is an alternate layout used by OpenBMC systems
The division of space is as follows:
u-boot + env: 0.5MB
kernel/FIT: 5MB
rofs: 42.5MB
rwfs: 16MB
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
---
v2:
- Add copyright notice
---
.../arm/boot/dts/openbmc-flash-layout-64.dtsi | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
new file mode 100644
index 000000000000..c8e0409d889e
--- /dev/null
+++ b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Bytedance.
+ */
+
+partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u-boot@0 {
+ reg = <0x0 0x60000>; // 384KB
+ label = "u-boot";
+ };
+
+ u-boot-env@e0000 {
+ reg = <0x60000 0x20000>; // 128KB
+ label = "u-boot-env";
+ };
+
+ kernel@100000 {
+ reg = <0x80000 0x500000>; // 5MB
+ label = "kernel";
+ };
+
+ rofs@a00000 {
+ reg = <0x580000 0x2a80000>; // 42.5MB
+ label = "rofs";
+ };
+
+ rwfs@6000000 {
+ reg = <0x3000000 0x1000000>; // 16MB
+ label = "rwfs";
+ };
+};
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH linux dev-5.8 v2 2/2] ARM: dts: aspeed: Add Bytedance g220a BMC machine
2020-09-28 9:45 [PATCH linux dev-5.8 v2 0/2] Add Bytedance g220a BMC machine John Wang
2020-09-28 9:45 ` [PATCH linux dev-5.8 v2 1/2] ARM: dts: Add 64MiB OpenBMC flash layout John Wang
@ 2020-09-28 9:45 ` John Wang
1 sibling, 0 replies; 3+ messages in thread
From: John Wang @ 2020-09-28 9:45 UTC (permalink / raw)
To: openbmc, joel; +Cc: Lotus Xu
From: Lotus Xu <xuxiaohan@bytedance.com>
The g220a is a server platform with an ASPEED AST2500 BMC.
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
---
v2:
- Add copyright notice
- Remove GFX device node
- Change the module to system name
---
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/aspeed-bmc-bytedance-g220a.dts | 919 ++++++++++++++++++
2 files changed, 920 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 56fd8c8a2ba9..7e4d3600e16d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1351,6 +1351,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-amd-ethanolx.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
+ aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
new file mode 100644
index 000000000000..8c41e0d20572
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
@@ -0,0 +1,919 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Bytedance.
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Bytedance G220A BMC";
+ compatible = "bytedance,g220a-bmc", "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+ i2c14 = &channel_3_0;
+ i2c15 = &channel_3_1;
+ i2c16 = &channel_3_2;
+ i2c17 = &channel_3_3;
+ i2c18 = &channel_6_0;
+ i2c19 = &channel_6_1;
+ i2c20 = &channel_6_2;
+ i2c21 = &channel_6_3;
+ i2c22 = &channel_6_4;
+ i2c23 = &channel_6_5;
+ i2c24 = &channel_6_6;
+ i2c25 = &channel_6_7;
+ i2c26 = &channel_6_8;
+ i2c27 = &channel_6_9;
+ i2c28 = &channel_6_10;
+ i2c29 = &channel_6_11;
+ i2c30 = &channel_6_12;
+ i2c31 = &channel_6_13;
+ i2c32 = &channel_6_14;
+ i2c33 = &channel_6_15;
+ i2c34 = &channel_6_16;
+ i2c35 = &channel_6_17;
+ i2c36 = &channel_6_18;
+ i2c37 = &channel_6_19;
+ i2c38 = &channel_6_20;
+ i2c39 = &channel_6_21;
+ i2c40 = &channel_6_22;
+ i2c41 = &channel_6_23;
+ i2c42 = &channel_6_24;
+ i2c43 = &channel_6_25;
+ i2c44 = &channel_10_0;
+ i2c45 = &channel_10_1;
+ i2c46 = &channel_10_2;
+ i2c47 = &channel_10_3;
+ i2c48 = &channel_10_4;
+ i2c49 = &channel_10_5;
+ i2c50 = &channel_10_6;
+ i2c51 = &channel_10_7;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@bc000000 {
+ no-map;
+ reg = <0xbc000000 0x04000000>; /* 64M */
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ bmc_alive {
+ label = "bmc_alive";
+ gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ led-pattern = <1000 1000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ burn-in-signal {
+ label = "burn-in";
+ gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(R, 5)>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ rear-riser1-presence {
+ label = "rear-riser1-presence";
+ gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <1>;
+ };
+
+ alrt-pvddq-cpu0 {
+ label = "alrt-pvddq-cpu0";
+ gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+ linux,code = <2>;
+ };
+
+ rear-riser0-presence {
+ label = "rear-riser0-presence";
+ gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+ linux,code = <3>;
+ };
+
+ fault-pvddq-cpu0 {
+ label = "fault-pvddq-cpu0";
+ gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <4>;
+ };
+
+ alrt-pvddq-cpu1 {
+ label = "alrt-pvddq-cpu1";
+ gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <5>;
+ };
+
+ fault-pvddq-cpu1 {
+ label = "alrt-pvddq-cpu1";
+ gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <6>;
+ };
+
+ fault-pvccin-cpu1 {
+ label = "fault-pvccin-cpuq";
+ gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <7>;
+ };
+
+ bmc-rom0-wp {
+ label = "bmc-rom0-wp";
+ gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+ linux,code = <8>;
+ };
+
+ bmc-rom1-wp {
+ label = "bmc-rom1-wp";
+ gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+ linux,code = <9>;
+ };
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <10>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <11>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+ linux,code = <12>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+ linux,code = <13>;
+ };
+
+ fan4-presence {
+ label = "fan4-presence";
+ gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <14>;
+ };
+
+ fan5-presence {
+ label = "fan5-presence";
+ gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+ linux,code = <15>;
+ };
+
+ front-bp1-presence {
+ label = "front-bp1-presence";
+ gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
+ linux,code = <16>;
+ };
+
+ rear-bp-presence {
+ label = "rear-bp-presence";
+ gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
+ linux,code = <17>;
+ };
+
+ fault-pvccin-cpu0 {
+ label = "fault-pvccin-cpu0";
+ gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
+ linux,code = <18>;
+ };
+
+ alrt-p1v05-pvcc {
+ label = "alrt-p1v05-pvcc1";
+ gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
+ linux,code = <19>;
+ };
+
+ fault-p1v05-pvccio {
+ label = "alrt-p1v05-pvcc1";
+ gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
+ linux,code = <20>;
+ };
+
+ alrt-p1v8-pvccio {
+ label = "alrt-p1v8-pvccio";
+ gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
+ linux,code = <21>;
+ };
+
+ fault-p1v8-pvccio {
+ label = "fault-p1v8-pvccio";
+ gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
+ linux,code = <22>;
+ };
+
+ front-bp0-presence {
+ label = "front-bp0-presence";
+ gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
+ linux,code = <23>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&peci0{
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /*A0-A7*/ "SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0",
+ "","","","",
+ /*B0-B7*/ "BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N",
+ "","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3",
+ "FM_PROJECT_ID4","FM_PROJECT_ID5","","",
+ /*F0-F7*/ "PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N",
+ "BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY",
+ "PCH_GLB_RST_N",
+ /*G0-G7*/ "P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N",
+ "P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT",
+ "NMI_BUTTON",
+ /*H0-H7*/ "BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK",
+ "BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0",
+ "PCA9546_U70_RST_N","IRQ_SML0_ALERT_N",
+ /*I0-I7*/ "FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N",
+ "","","","","",
+ /*J0-J7*/ "FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N",
+ "","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N",
+ "","IRQ_SML1_PMBUS_ALERT_N","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","","FM_PCH_THERMTRIP_N","INTRUDER_N",
+ /*R0-R7*/ "","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N",
+ "ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","",
+ /*S0-S7*/ "BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N",
+ "FM_BMC_XDP_DEBUG_EN","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N",
+ "","","","",
+ /*Z0-Z7*/ "XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL",
+ "PCH_BMC_SMI_ACTIVE_R_N","","","","",
+ /*AA0-AA7*/ "PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R",
+ "FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT",
+ /*AB0-AB7*/ "","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","",
+ /*AC0-AC7*/ "","","","","","","","CPLD_PLTRST_B_N";
+};
+
+&kcs3 {
+ kcs_addr = <0xCA2>;
+ status = "okay";
+};
+
+&kcs4 {
+ kcs_addr = <0xCA4>;
+ status = "okay";
+};
+
+&lpc_snoop {
+ snoop-ports = <0x80>;
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default
+ &pinctrl_nrts2_default
+ &pinctrl_ndtr2_default
+ &pinctrl_ndsr2_default
+ &pinctrl_ncts2_default
+ &pinctrl_ndcd2_default
+ &pinctrl_nri2_default>;
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel_3_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ channel_3_1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_3_2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_3_3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+ i2c-switch@72 {
+ compatible = "nxp,pca9548";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel_6_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ channel_6_1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_6_2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_6_3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ channel_6_4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ channel_6_5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ channel_6_6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ channel_6_7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel_6_8: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ i2c-switch@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel_6_12: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ };
+
+ channel_6_13: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_6_14: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_6_15: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ channel_6_9: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ i2c-switch@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel_6_16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ };
+
+ channel_6_17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_6_18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_6_19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ channel_6_10: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ i2c-switch@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel_6_20: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ channel_6_21: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_6_22: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_6_23: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ channel_6_11: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ i2c-switch@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel_6_24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ channel_6_25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+ pca0:pca9555@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca1:pca9555@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel_10_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ channel_10_1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_10_2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_10_3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel_10_4: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ channel_10_5: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_10_6: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_10_7: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ };
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ };
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ };
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+ };
+};
+
+&gpio {
+ pin_gpio_i3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "NCSI_BMC_R_SEL";
+ };
+
+ pin_gpio_b6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "EN_NCSI_SWITCH_N";
+ };
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+ status = "okay";
+};
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-09-28 9:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-28 9:45 [PATCH linux dev-5.8 v2 0/2] Add Bytedance g220a BMC machine John Wang
2020-09-28 9:45 ` [PATCH linux dev-5.8 v2 1/2] ARM: dts: Add 64MiB OpenBMC flash layout John Wang
2020-09-28 9:45 ` [PATCH linux dev-5.8 v2 2/2] ARM: dts: aspeed: Add Bytedance g220a BMC machine John Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).