From: Troy Lee <troy_lee@aspeedtech.com>
To: <openbmc@lists.ozlabs.org>, Jean Delvare <jdelvare@suse.com>,
"Guenter Roeck" <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>,
Jonathan Corbet <corbet@lwn.net>,
Philipp Zabel <p.zabel@pengutronix.de>,
"open list:HARDWARE MONITORING" <linux-hwmon@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-arm-kernel@lists.infradead.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-aspeed@lists.ozlabs.org>,
open list <linux-kernel@vger.kernel.org>,
"open list:DOCUMENTATION" <linux-doc@vger.kernel.org>
Cc: billy_tsai@aspeedtech.com, leetroy@gmail.com,
troy_lee@aspeedtech.com, ryan_chen@aspeedtech.com,
chiawei_wang@aspeedtech.com
Subject: [PATCH 1/4] dt-bindings: hwmon: Add Aspeed AST2600 PWM/Fan
Date: Wed, 9 Dec 2020 15:59:17 +0800 [thread overview]
Message-ID: <20201209075921.26689-2-troy_lee@aspeedtech.com> (raw)
In-Reply-To: <20201209075921.26689-1-troy_lee@aspeedtech.com>
For supporting a new AST2600 PWM/Fan hwmon driver, we add a new binding.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
---
.../bindings/hwmon/aspeed2600-pwm-tacho.txt | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed2600-pwm-tacho.txt
diff --git a/Documentation/devicetree/bindings/hwmon/aspeed2600-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed2600-pwm-tacho.txt
new file mode 100644
index 000000000000..61b11914352f
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/aspeed2600-pwm-tacho.txt
@@ -0,0 +1,69 @@
+ASPEED AST2600 PWM and Fan Tacho controller device driver
+
+The ASPEED PWM controller can support upto 16 PWM outputs. The ASPEED Fan Tacho
+controller can support upto 16 Fan tachometer inputs.
+
+There can be upto 16 fans supported. Each fan can have one PWM output and
+one Fan tach inputs.
+
+Required properties for pwm-tacho node:
+- #address-cells : should be 1.
+
+- #size-cells : should be 0.
+
+- #cooling-cells: should be 2.
+
+- reg : address and length of the register set for the device.
+
+- pinctrl-names : a pinctrl state named "default" must be defined.
+
+- pinctrl-0 : phandle referencing pin configuration of the PWM ports.
+
+- compatible : should be "aspeed,ast2600-pwm-tachometer".
+
+- clocks : phandle to clock provider with the clock number in the second cell
+
+- resets : phandle to reset controller with the reset number in the second cell
+
+fan subnode format:
+===================
+Under fan subnode there can upto 16 child nodes, with each child node
+representing a fan. There are 16 fans each fan can have one PWM port and one
+Fan tach inputs.
+For PWM port can be configured cooling-levels to create cooling device.
+Cooling device could be bound to a thermal zone for the thermal control.
+
+Required properties for each child node:
+- reg : should specify PWM source port.
+ integer value in the range 0x00 to 0x0f with 0x00 indicating PWM port 0
+ and 0x0f indicating PWM port F.
+
+- cooling-levels: PWM duty cycle values in a range from 0 to 255
+ which correspond to thermal cooling states.
+
+- aspeed,fan-tach-ch : should specify the Fan tach input channel.
+ integer value in the range 0 through 15, with 0 indicating
+ Fan tach channel 0 and 15 indicating Fan tach channel 15.
+ Atleast one Fan tach input channel is required.
+
+- aspeed,target-pwm : Specify the frequency of PWM. The value range from 24 to
+ 780000. Default value will be set to 25000.
+
+- aspeed,pulse-pr : Specify tacho pulse per revolution of the fan. A general
+ parameter of pulse-pr is 2.
+
+Examples:
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_tach0_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,target-pwm = <25000>;
+ cooling-levels = /bits/ 8 <125 151 177 203 229 255>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ aspeed,pulse-pr = <2>;
+ };
+};
--
2.17.1
next prev parent reply other threads:[~2020-12-09 8:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-09 7:59 [PATCH 0/4] hwmon: aspeed2600-pwm-tacho: Add driver support Troy Lee
2020-12-09 7:59 ` Troy Lee [this message]
2020-12-11 3:26 ` [PATCH 1/4] dt-bindings: hwmon: Add Aspeed AST2600 PWM/Fan Rob Herring
2020-12-15 9:25 ` Troy Lee
2020-12-09 7:59 ` [PATCH 2/4] ARM: dts: aspeed: Add Aspeed AST2600 PWM/Fan node in devicetree Troy Lee
2020-12-09 7:59 ` [PATCH 3/4] hwmon: Add Aspeed AST2600 support Troy Lee
2020-12-09 7:59 ` [PATCH 4/4] hwmon: Support Aspeed AST2600 PWM/Fan tachometer Troy Lee
2020-12-10 16:16 ` Guenter Roeck
2020-12-15 9:45 ` Troy Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201209075921.26689-2-troy_lee@aspeedtech.com \
--to=troy_lee@aspeedtech.com \
--cc=andrew@aj.id.au \
--cc=billy_tsai@aspeedtech.com \
--cc=chiawei_wang@aspeedtech.com \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=joel@jms.id.au \
--cc=leetroy@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=openbmc@lists.ozlabs.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=ryan_chen@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).