openbmc.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: openbmc@lists.ozlabs.org
Subject: [PATCH linux dev-5.10 09/35] ARM: dts: aspeed: rainier: Add leds that are on optional PCI cable cards
Date: Mon,  8 Mar 2021 16:53:53 -0600	[thread overview]
Message-ID: <20210308225419.46530-10-eajames@linux.ibm.com> (raw)
In-Reply-To: <20210308225419.46530-1-eajames@linux.ibm.com>

From: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>

These are LEDs on the cable cards that plug into PCIE slots.
The LEDs are controlled by pca9552 i2c expander

Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
---
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 264 +++++++++++++++++++
 1 file changed, 264 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index c507e8da101e..3a9183bae259 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -789,6 +789,70 @@ nvme23 {
 			gpios = <&pca4 7 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	leds-optional-cablecard0 {
+		compatible = "gpio-leds";
+
+		cablecard0-cxp-top {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca5 0 GPIO_ACTIVE_LOW>;
+		};
+
+		cablecard0-cxp-bot {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca5 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds-optional-cablecard3 {
+		compatible = "gpio-leds";
+
+		cablecard3-cxp-top {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca6 0 GPIO_ACTIVE_LOW>;
+		};
+
+		cablecard3-cxp-bot {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca6 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds-optional-cablecard4 {
+		compatible = "gpio-leds";
+
+		cablecard4-cxp-top {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca7 0 GPIO_ACTIVE_LOW>;
+		};
+
+		cablecard4-cxp-bot {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca7 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds-optional-cablecard10 {
+		compatible = "gpio-leds";
+
+		cablecard10-cxp-top {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca8 0 GPIO_ACTIVE_LOW>;
+		};
+
+		cablecard10-cxp-bot {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca8 1 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &ehci1 {
@@ -1541,6 +1605,56 @@ eeprom@52 {
 		compatible = "atmel,24c64";
 		reg = <0x52>;
 	};
+
+	pca5: pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
 };
 
 &i2c5 {
@@ -1565,6 +1679,106 @@ eeprom@51 {
 		compatible = "atmel,24c64";
 		reg = <0x51>;
 	};
+
+	pca6: pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca7: pca9551@61 {
+		compatible = "nxp,pca9551";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
 };
 
 &i2c6 {
@@ -2411,6 +2625,56 @@ eeprom@51 {
 		compatible = "atmel,24c64";
 		reg = <0x51>;
 	};
+
+	pca8: pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
 };
 
 &i2c12 {
-- 
2.27.0


  parent reply	other threads:[~2021-03-08 23:00 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-08 22:53 [PATCH linux dev-5.10 00/35] Rainier and Everest system updates Eddie James
2021-03-08 22:53 ` [PATCH linux dev-5.10 01/35] ARM: dts: aspeed: rainier: Add Operator Panel LEDs Eddie James
2021-03-12  0:05   ` Joel Stanley
2021-03-08 22:53 ` [PATCH linux dev-5.10 02/35] ARM: dts: aspeed: rainier: Add directly controlled LEDs Eddie James
2021-03-12  0:04   ` Joel Stanley
2021-03-08 22:53 ` [PATCH linux dev-5.10 03/35] ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans Eddie James
2021-03-12  0:06   ` Joel Stanley
2021-03-08 22:53 ` [PATCH linux dev-5.10 04/35] ARM: dts: aspeed: rainier: Set MAX31785 config Eddie James
2021-03-12  0:07   ` Joel Stanley
2021-03-08 22:53 ` [PATCH linux dev-5.10 05/35] ARM: dts: aspeed: rainier: Add additional processor CFAMs Eddie James
2021-03-12  0:07   ` Joel Stanley
2021-03-08 22:53 ` [PATCH linux dev-5.10 06/35] ARM: dts: aspeed: rainier: Add leds that are off PCA9552 Eddie James
2021-03-12  0:09   ` Joel Stanley
2021-03-12  0:21   ` Milton Miller II
2021-03-12  0:30     ` Joel Stanley
     [not found]       ` <6ACEC474-8CFD-4BA9-B8FF-CCD41007AA67@linux.vnet.ibm.com>
2021-03-24 23:43         ` Joel Stanley
2021-04-26  5:59           ` vishwanatha subbanna
2021-04-27 21:22             ` Jacek Anaszewski
2021-03-08 22:53 ` [PATCH linux dev-5.10 07/35] ARM: dts: aspeed: rainier: Add leds that are off pic16f882 Eddie James
2021-03-12  0:10   ` Joel Stanley
2021-03-08 22:53 ` [PATCH linux dev-5.10 08/35] ARM: dts: aspeed: rainier: Add leds on optional DASD cards Eddie James
2021-03-12  0:10   ` Joel Stanley
2021-03-08 22:53 ` Eddie James [this message]
2021-03-12  0:11   ` [PATCH linux dev-5.10 09/35] ARM: dts: aspeed: rainier: Add leds that are on optional PCI cable cards Joel Stanley
2021-03-08 22:53 ` [PATCH linux dev-5.10 10/35] ARM: dts: aspeed: rainier: Add presence GPIOs Eddie James
2021-03-12  0:14   ` Joel Stanley
2021-03-08 22:53 ` [PATCH linux dev-5.10 11/35] ARM: dts: aspeed: rainier: Mark controllers as restricted Eddie James
2021-03-12  0:15   ` Joel Stanley
2021-03-08 22:53 ` [PATCH linux dev-5.10 12/35] ARM: dts: aspeed: rainier 4U: Fix fan configuration Eddie James
2021-03-12  0:17   ` Joel Stanley
2021-03-08 22:53 ` [PATCH linux dev-5.10 13/35] dt: bindings: mmc: Add phase control properties for the Aspeed SDHCI Eddie James
2021-03-12  0:19   ` Joel Stanley
2021-04-12  3:21     ` Andrew Jeffery
2021-03-08 22:53 ` [PATCH linux dev-5.10 14/35] mmc: sdhci: aspeed: Expose data sample phase delay tuning Eddie James
2021-03-08 22:53 ` [PATCH linux dev-5.10 15/35] ARM: dts: aspeed: tacoma: Add data sample phase delay for eMMC Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 16/35] ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 17/35] ARM: dts: aspeed: Everest: Add I2C components Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 18/35] ARM: dts: Aspeed: Everest: Add max31785 fan controller device Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 19/35] ARM: dts: Aspeed: Everest: Add FSI CFAMs and re-number engines Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 20/35] ARM: dts: Aspeed: Everest: Add pca9552 fan presence Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 21/35] ARM: dts: aspeed: everest: Add power supply i2c devices Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 22/35] ARM: dts: aspeed: everest: Add UCD90320 power sequencer Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 23/35] ARM: dts: aspeed: everest: GPIOs support Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 24/35] ARM: dts: Aspeed: Everest: Add RTC Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 25/35] ARM: dts: aspeed: rainier: Support pass 2 planar Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 26/35] fsi: scom: Handle FSI2PIB timeout Eddie James
2021-03-12  0:20   ` Joel Stanley
2021-03-08 22:54 ` [PATCH linux dev-5.10 27/35] net/ncsi: Avoid channel_monitor hrtimer deadlock Eddie James
2021-03-12  0:35   ` Joel Stanley
2021-03-08 22:54 ` [PATCH linux dev-5.10 28/35] ftgmac100: Restart MAC HW once Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 29/35] hwmon: (pmbus) Add a PMBUS_NO_CAPABILITY platform data flag Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 30/35] hwmon: (pmbus/ibm-cffps) Set the PMBUS_NO_CAPABILITY flag Eddie James
2021-03-12  0:23   ` Joel Stanley
2021-03-08 22:54 ` [PATCH linux dev-5.10 31/35] i2c: Allow throttling of transfers to client devices Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 32/35] pmbus: (ucd9000) Throttle SMBus transfers to avoid poor behaviour Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 33/35] pmbus: (core) Add a one-shot retry in pmbus_set_page() Eddie James
2021-03-09 20:21   ` Andrei Kartashev
2021-03-12  0:35   ` Joel Stanley
2021-03-08 22:54 ` [PATCH linux dev-5.10 34/35] pmbus: (max31785) Add a local pmbus_set_page() implementation Eddie James
2021-03-08 22:54 ` [PATCH linux dev-5.10 35/35] pmbus: (max31785) Retry enabling fans after writing MFR_FAN_CONFIG Eddie James
2021-03-12  0:37 ` [PATCH linux dev-5.10 00/35] Rainier and Everest system updates Joel Stanley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210308225419.46530-10-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=openbmc@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).