* [PATCH v5 0/4] Add Ampere's Altra SMPro hwmon driver
@ 2021-07-13 6:00 Quan Nguyen
2021-07-13 6:00 ` [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver Quan Nguyen
` (3 more replies)
0 siblings, 4 replies; 11+ messages in thread
From: Quan Nguyen @ 2021-07-13 6:00 UTC (permalink / raw)
To: Joel Stanley, Andrew Jeffery, Jean Delvare, Guenter Roeck,
Rob Herring, Lee Jones, Jonathan Corbet, linux-hwmon, devicetree,
linux-kernel, linux-doc, linux-aspeed, openbmc
Cc: Open Source Submission, Thang Q . Nguyen, Phong Vo
This patch series adds support for Ampere SMpro hwmon driver. This
driver supports accessing various CPU sensors provided by the SMpro
co-processor including temperature, power, voltages, and current found
on Ampere Altra processor family.
The SMpro co-processor on Ampere Altra processor family is to monitor
and report various data included hwmon-related info, RAS errors, and
other miscellaneous information. The SMPro MFD driver intializes the
register map and instantiates all sub-devices. All the specifics will
be handled in the child drivers.
v5:
+ Introduced the smpro-mfd driver and drop the use of
simple-mfd-i2c driver to avoid DT node with no resource in child
device DT nodes [Rob]
+ Removed the use of reg DT property in child driver [Quan]
+ Validated ManufactureID when probing smpro-mfd drivers [Quan]
+ As child devices are instantiated by SMPro MFD driver, drop the
ManufacturerID checking in child driver, ie: smpro-hwmon [Quan]
+ Revised commit messages [Quan]
v4:
+ Revised commit message [Quan]
+ Fixed build issue found by kernel test robot [Guenter]
+ Returned regmap_read() error code [Guenter]
v3:
+ Supported list of compatible string [Rob]
+ Introduced reg property in DT to specify reg offset [Rob]
+ Updated description and other minor changes in yaml file [Rob]
+ Handled negative temperature value [Guenter]
+ Returned -ENODEV if Manufacturer ID is wrong [Guenter]
+ Refactored smpro_read_string() and smpro_temp_read() [Guenter]
+ Removed smpro_write() function [Guenter]
+ Added minor refactor changes [Quan]
v2:
+ Used 'struct of_device_id's .data attribute [Lee Jones]
+ Removed "virtual" sensors [Guenter]
+ Fixed typo "mili" to "milli", "nanoWatt" to "microWatt" [Guenter]
+ Reported SOC_TDP as "Socket TDP" using max attributes [Guenter]
+ Clarified "highest" meaning in documentation [Guenter]
+ Corrected return error code when host is turn off [Guenter]
+ Reported MEM HOT Threshold for all DIMMs as temp*_crit [Guenter]
+ Removed license info as SPDX-License-Identifier existed [Guenter]
+ Added is_visible() support [Guenter]
+ Used HWMON_CHANNEL_INFO() macro and LABEL attributes [Guenter]
+ Made is_valid_id() return boolean [Guenter]
+ Returned -EPROBE_DEFER when smpro reg inaccessible [Guenter]
+ Removed unnecessary error message when dev register fail [Guenter]
+ Removed Socket TDP sensor [Quan]
+ Changed "ampere,ac01-smpro" to "ampere,smpro" [Quan]
+ Included sensor type and channel in labels [Quan]
+ Refactorized code to fix checkpatch.pl --strict complaint [Quan]
Quan Nguyen (4):
dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver
mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver
hwmon: smpro: Add Ampere's Altra smpro-hwmon driver
docs: hwmon: (smpro-hwmon) Add documentation
.../devicetree/bindings/mfd/ampere,smpro.yaml | 52 ++
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/smpro-hwmon.rst | 101 ++++
drivers/hwmon/Kconfig | 8 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/smpro-hwmon.c | 463 ++++++++++++++++++
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/smpro-mfd.c | 74 +++
9 files changed, 713 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/ampere,smpro.yaml
create mode 100644 Documentation/hwmon/smpro-hwmon.rst
create mode 100644 drivers/hwmon/smpro-hwmon.c
create mode 100644 drivers/mfd/smpro-mfd.c
--
2.28.0
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver 2021-07-13 6:00 [PATCH v5 0/4] Add Ampere's Altra SMPro hwmon driver Quan Nguyen @ 2021-07-13 6:00 ` Quan Nguyen 2021-07-16 17:34 ` Rob Herring 2021-07-13 6:00 ` [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro " Quan Nguyen ` (2 subsequent siblings) 3 siblings, 1 reply; 11+ messages in thread From: Quan Nguyen @ 2021-07-13 6:00 UTC (permalink / raw) To: Joel Stanley, Andrew Jeffery, Jean Delvare, Guenter Roeck, Rob Herring, Lee Jones, Jonathan Corbet, linux-hwmon, devicetree, linux-kernel, linux-doc, linux-aspeed, openbmc Cc: Open Source Submission, Thang Q . Nguyen, Phong Vo Adds device tree bindings for SMPro MFD driver found on the Mt.Jade hardware reference platform with Ampere's Altra Processor family. The SMpro co-processor on Ampere Altra processor family is to monitor and report various data included hwmon-related info, RAS errors, and other miscellaneous information. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> --- Changes in v5: + Dropped ../bindings/hwmon/ampere,ac01-hwmon.yaml file [Quan] + Removed patternProperties section and child DT nodes in example section [Quan] + Revised commit message [Quan] Changes in v4: + Revised the commit message to clarify how the specific info will be handled commented by Rob. Changes in v3: + Supported list of compatible string [Rob] + Introduced reg property in DT to specify reg offset [Rob] + Updated description and other minor changes in yaml file [Rob] Changes in v2: + Changed "ampere,ac01-smpro" to "ampere,smpro" [Quan] .../devicetree/bindings/mfd/ampere,smpro.yaml | 52 +++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/ampere,smpro.yaml diff --git a/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml b/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml new file mode 100644 index 000000000000..8b48747e5de3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ampere,smpro.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ampere Altra SMPro firmware driver + +maintainers: + - Quan Nguyen <quan@os.amperecomputing.com> + +description: | + Ampere Altra SMPro firmware may contain different blocks like hardware + monitoring, error monitoring and other miscellaneous features. + +properties: + compatible: + enum: + - ampere,smpro + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + smpro@4f { + compatible = "ampere,smpro"; + reg = <0x4f>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; -- 2.28.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver 2021-07-13 6:00 ` [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver Quan Nguyen @ 2021-07-16 17:34 ` Rob Herring 2021-07-17 12:51 ` Quan Nguyen 0 siblings, 1 reply; 11+ messages in thread From: Rob Herring @ 2021-07-16 17:34 UTC (permalink / raw) To: Quan Nguyen Cc: linux-hwmon, devicetree, Jean Delvare, linux-aspeed, linux-doc, Andrew Jeffery, Jonathan Corbet, openbmc, Thang Q . Nguyen, linux-kernel, Phong Vo, Rob Herring, Open Source Submission, Lee Jones, Guenter Roeck On Tue, 13 Jul 2021 13:00:28 +0700, Quan Nguyen wrote: > Adds device tree bindings for SMPro MFD driver found on the Mt.Jade > hardware reference platform with Ampere's Altra Processor family. > > The SMpro co-processor on Ampere Altra processor family is to monitor > and report various data included hwmon-related info, RAS errors, and > other miscellaneous information. > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > --- > Changes in v5: > + Dropped ../bindings/hwmon/ampere,ac01-hwmon.yaml file [Quan] > + Removed patternProperties section and child DT nodes in example > section [Quan] > + Revised commit message [Quan] > > Changes in v4: > + Revised the commit message to clarify how the specific info will > be handled commented by Rob. > > Changes in v3: > + Supported list of compatible string [Rob] > + Introduced reg property in DT to specify reg offset [Rob] > + Updated description and other minor changes in yaml file [Rob] > > Changes in v2: > + Changed "ampere,ac01-smpro" to "ampere,smpro" [Quan] > > .../devicetree/bindings/mfd/ampere,smpro.yaml | 52 +++++++++++++++++++ > 1 file changed, 52 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/ampere,smpro.yaml > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver 2021-07-16 17:34 ` Rob Herring @ 2021-07-17 12:51 ` Quan Nguyen 0 siblings, 0 replies; 11+ messages in thread From: Quan Nguyen @ 2021-07-17 12:51 UTC (permalink / raw) To: Rob Herring Cc: linux-hwmon, devicetree, Jean Delvare, linux-aspeed, linux-doc, Andrew Jeffery, Jonathan Corbet, openbmc, Thang Q . Nguyen, linux-kernel, Phong Vo, Rob Herring, Open Source Submission, Lee Jones, Guenter Roeck On 17/07/2021 00:34, Rob Herring wrote: > On Tue, 13 Jul 2021 13:00:28 +0700, Quan Nguyen wrote: >> Adds device tree bindings for SMPro MFD driver found on the Mt.Jade >> hardware reference platform with Ampere's Altra Processor family. >> >> The SMpro co-processor on Ampere Altra processor family is to monitor >> and report various data included hwmon-related info, RAS errors, and >> other miscellaneous information. >> >> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> >> --- >> Changes in v5: >> + Dropped ../bindings/hwmon/ampere,ac01-hwmon.yaml file [Quan] >> + Removed patternProperties section and child DT nodes in example >> section [Quan] >> + Revised commit message [Quan] >> >> Changes in v4: >> + Revised the commit message to clarify how the specific info will >> be handled commented by Rob. >> >> Changes in v3: >> + Supported list of compatible string [Rob] >> + Introduced reg property in DT to specify reg offset [Rob] >> + Updated description and other minor changes in yaml file [Rob] >> >> Changes in v2: >> + Changed "ampere,ac01-smpro" to "ampere,smpro" [Quan] >> >> .../devicetree/bindings/mfd/ampere,smpro.yaml | 52 +++++++++++++++++++ >> 1 file changed, 52 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mfd/ampere,smpro.yaml >> > > Reviewed-by: Rob Herring <robh@kernel.org> > Thanks Rob for the review. - Quan ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver 2021-07-13 6:00 [PATCH v5 0/4] Add Ampere's Altra SMPro hwmon driver Quan Nguyen 2021-07-13 6:00 ` [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver Quan Nguyen @ 2021-07-13 6:00 ` Quan Nguyen 2021-07-13 9:11 ` Guenter Roeck 2021-07-13 6:00 ` [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver Quan Nguyen 2021-07-13 6:00 ` [PATCH v5 4/4] docs: hwmon: (smpro-hwmon) Add documentation Quan Nguyen 3 siblings, 1 reply; 11+ messages in thread From: Quan Nguyen @ 2021-07-13 6:00 UTC (permalink / raw) To: Joel Stanley, Andrew Jeffery, Jean Delvare, Guenter Roeck, Rob Herring, Lee Jones, Jonathan Corbet, linux-hwmon, devicetree, linux-kernel, linux-doc, linux-aspeed, openbmc Cc: Open Source Submission, Thang Q . Nguyen, Phong Vo Adds Multi-function devices driver for SMpro co-processor found on the Mt.Jade hardware reference platform with Ampere's Altra processor family. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> --- Changes in v5: + Dropped the use of simple-mfd-i2c driver [Quan] + Introduced drivers/mfd/smpro-mfd.c driver to instantiate sub-devices. This is to avoid DT nodes without resource issue [Quan] + Revised commit message [Quan] Changes in v4: + Add "depends on I2C" to fix build issue found by kernel test robot [Guenter] Changes in v3: + None Changes in v2: + Used 'struct of_device_id's .data attribute [Lee Jones] drivers/mfd/Kconfig | 12 +++++++ drivers/mfd/Makefile | 1 + drivers/mfd/smpro-mfd.c | 74 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 87 insertions(+) create mode 100644 drivers/mfd/smpro-mfd.c diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 6a3fd2d75f96..25e502cca32f 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -77,6 +77,18 @@ config MFD_AS3711 help Support for the AS3711 PMIC from AMS +config MFD_SMPRO + tristate "Ampere Computing MFD SMpro core driver" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + Say yes here to enable SMpro driver support for Ampere's Altra + processor family. + + Ampere's Altra SMpro exposes an I2C regmap interface that can + be accessed by child devices. + config MFD_AS3722 tristate "ams AS3722 Power Management IC" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 8116c19d5fd4..046fd36de85a 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -268,6 +268,7 @@ obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o +obj-$(CONFIG_MFD_SMPRO) += smpro-mfd.o obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o diff --git a/drivers/mfd/smpro-mfd.c b/drivers/mfd/smpro-mfd.c new file mode 100644 index 000000000000..b0cd3c248507 --- /dev/null +++ b/drivers/mfd/smpro-mfd.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Ampere Altra Family SMPro MFD - I2C + * + * Copyright (c) 2021, Ampere Computing LLC + * + * Author: Quan Nguyen <quan@os.amperecomputing..com> + */ + +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/mfd/core.h> +#include <linux/regmap.h> + +/* Identification Registers */ +#define MANUFACTURER_ID_REG 0x02 +#define AMPERE_MANUFACTURER_ID 0xCD3A + +static const struct regmap_config simple_word_regmap_config = { + .reg_bits = 8, + .val_bits = 16, +}; + +static const struct mfd_cell smpro_devs[] = { + MFD_CELL_NAME("smpro-hwmon"), +}; + +static int smpro_mfd_probe(struct i2c_client *i2c) +{ + const struct regmap_config *config; + struct regmap *regmap; + unsigned int val; + int ret; + + config = device_get_match_data(&i2c->dev); + if (!config) + config = &simple_word_regmap_config; + + regmap = devm_regmap_init_i2c(i2c, config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + /* Check for valid ID */ + ret = regmap_read(regmap, MANUFACTURER_ID_REG, &val); + if (ret) + return ret; + + if (val != AMPERE_MANUFACTURER_ID) + return -ENODEV; + + return devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, + smpro_devs, ARRAY_SIZE(smpro_devs), NULL, 0, NULL); +} + +static const struct of_device_id smpro_mfd_of_match[] = { + { .compatible = "ampere,smpro", .data = &simple_word_regmap_config }, + {} +}; +MODULE_DEVICE_TABLE(of, smpro_mfd_of_match); + +static struct i2c_driver smpro_mfd_driver = { + .probe_new = smpro_mfd_probe, + .driver = { + .name = "smpro-mfd-i2c", + .of_match_table = smpro_mfd_of_match, + }, +}; +module_i2c_driver(smpro_mfd_driver); + +MODULE_AUTHOR("Quan Nguyen <quan@os.amperecomputing.com>"); +MODULE_DESCRIPTION("SMPRO MFD - I2C driver"); +MODULE_LICENSE("GPL v2"); -- 2.28.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver 2021-07-13 6:00 ` [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro " Quan Nguyen @ 2021-07-13 9:11 ` Guenter Roeck 2021-07-13 9:26 ` Quan Nguyen 0 siblings, 1 reply; 11+ messages in thread From: Guenter Roeck @ 2021-07-13 9:11 UTC (permalink / raw) To: Quan Nguyen, Joel Stanley, Andrew Jeffery, Jean Delvare, Rob Herring, Lee Jones, Jonathan Corbet, linux-hwmon, devicetree, linux-kernel, linux-doc, linux-aspeed, openbmc Cc: Open Source Submission, Thang Q . Nguyen, Phong Vo On 7/12/21 11:00 PM, Quan Nguyen wrote: > Adds Multi-function devices driver for SMpro co-processor found on the > Mt.Jade hardware reference platform with Ampere's Altra processor family. > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Maybe that has been discussed, but is there anything else besides hardware monitoring connected to this i2c interface, and are there more child drivers coming ? I don't find the BMC Interface Specification mentioned in the documentation patch, but the hardware specification seems to suggest that the i2c bus is dedicated for hardware monitoring. If there is no other child driver, an mfd driver would not make sense. Thanks, Guenter > --- > Changes in v5: > + Dropped the use of simple-mfd-i2c driver [Quan] > + Introduced drivers/mfd/smpro-mfd.c driver to instantiate > sub-devices. This is to avoid DT nodes without resource issue [Quan] > + Revised commit message [Quan] > > Changes in v4: > + Add "depends on I2C" to fix build issue found by kernel test > robot [Guenter] > > Changes in v3: > + None > > Changes in v2: > + Used 'struct of_device_id's .data attribute [Lee Jones] > > drivers/mfd/Kconfig | 12 +++++++ > drivers/mfd/Makefile | 1 + > drivers/mfd/smpro-mfd.c | 74 +++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 87 insertions(+) > create mode 100644 drivers/mfd/smpro-mfd.c > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 6a3fd2d75f96..25e502cca32f 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -77,6 +77,18 @@ config MFD_AS3711 > help > Support for the AS3711 PMIC from AMS > > +config MFD_SMPRO > + tristate "Ampere Computing MFD SMpro core driver" > + depends on I2C > + select MFD_CORE > + select REGMAP_I2C > + help > + Say yes here to enable SMpro driver support for Ampere's Altra > + processor family. > + > + Ampere's Altra SMpro exposes an I2C regmap interface that can > + be accessed by child devices. > + > config MFD_AS3722 > tristate "ams AS3722 Power Management IC" > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 8116c19d5fd4..046fd36de85a 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -268,6 +268,7 @@ obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o > > obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o > obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o > +obj-$(CONFIG_MFD_SMPRO) += smpro-mfd.o > obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o > > obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o > diff --git a/drivers/mfd/smpro-mfd.c b/drivers/mfd/smpro-mfd.c > new file mode 100644 > index 000000000000..b0cd3c248507 > --- /dev/null > +++ b/drivers/mfd/smpro-mfd.c > @@ -0,0 +1,74 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Ampere Altra Family SMPro MFD - I2C > + * > + * Copyright (c) 2021, Ampere Computing LLC > + * > + * Author: Quan Nguyen <quan@os.amperecomputing..com> > + */ > + > +#include <linux/i2c.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of_platform.h> > +#include <linux/mfd/core.h> > +#include <linux/regmap.h> > + > +/* Identification Registers */ > +#define MANUFACTURER_ID_REG 0x02 > +#define AMPERE_MANUFACTURER_ID 0xCD3A > + > +static const struct regmap_config simple_word_regmap_config = { > + .reg_bits = 8, > + .val_bits = 16, > +}; > + > +static const struct mfd_cell smpro_devs[] = { > + MFD_CELL_NAME("smpro-hwmon"), > +}; > + > +static int smpro_mfd_probe(struct i2c_client *i2c) > +{ > + const struct regmap_config *config; > + struct regmap *regmap; > + unsigned int val; > + int ret; > + > + config = device_get_match_data(&i2c->dev); > + if (!config) > + config = &simple_word_regmap_config; > + > + regmap = devm_regmap_init_i2c(i2c, config); > + if (IS_ERR(regmap)) > + return PTR_ERR(regmap); > + > + /* Check for valid ID */ > + ret = regmap_read(regmap, MANUFACTURER_ID_REG, &val); > + if (ret) > + return ret; > + > + if (val != AMPERE_MANUFACTURER_ID) > + return -ENODEV; > + > + return devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, > + smpro_devs, ARRAY_SIZE(smpro_devs), NULL, 0, NULL); > +} > + > +static const struct of_device_id smpro_mfd_of_match[] = { > + { .compatible = "ampere,smpro", .data = &simple_word_regmap_config }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, smpro_mfd_of_match); > + > +static struct i2c_driver smpro_mfd_driver = { > + .probe_new = smpro_mfd_probe, > + .driver = { > + .name = "smpro-mfd-i2c", > + .of_match_table = smpro_mfd_of_match, > + }, > +}; > +module_i2c_driver(smpro_mfd_driver); > + > +MODULE_AUTHOR("Quan Nguyen <quan@os.amperecomputing.com>"); > +MODULE_DESCRIPTION("SMPRO MFD - I2C driver"); > +MODULE_LICENSE("GPL v2"); > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro MFD driver 2021-07-13 9:11 ` Guenter Roeck @ 2021-07-13 9:26 ` Quan Nguyen 0 siblings, 0 replies; 11+ messages in thread From: Quan Nguyen @ 2021-07-13 9:26 UTC (permalink / raw) To: Guenter Roeck, Joel Stanley, Andrew Jeffery, Jean Delvare, Rob Herring, Lee Jones, Jonathan Corbet, linux-hwmon, devicetree, linux-kernel, linux-doc, linux-aspeed, openbmc Cc: Open Source Submission, Thang Q . Nguyen, Phong Vo On 13/07/2021 16:11, Guenter Roeck wrote: > On 7/12/21 11:00 PM, Quan Nguyen wrote: >> Adds Multi-function devices driver for SMpro co-processor found on the >> Mt.Jade hardware reference platform with Ampere's Altra processor family. >> >> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > > Maybe that has been discussed, but is there anything else besides > hardware monitoring connected to this i2c interface, and are there > more child drivers coming ? I don't find the BMC Interface Specification > mentioned in the documentation patch, but the hardware specification > seems to suggest that the i2c bus is dedicated for hardware monitoring. > If there is no other child driver, an mfd driver would not make sense. >Thanks for the comment. Yes, there are more child drivers coming, one is to provide error monitoring and the other to provide other miscellaneous features. The child drivers used the register map exposed by this mfd driver. -Quan > Thanks, > Guenter > >> --- >> Changes in v5: >> + Dropped the use of simple-mfd-i2c driver [Quan] >> + Introduced drivers/mfd/smpro-mfd.c driver to instantiate >> sub-devices. This is to avoid DT nodes without resource issue [Quan] >> + Revised commit message [Quan] >> >> Changes in v4: >> + Add "depends on I2C" to fix build issue found by kernel test >> robot [Guenter] >> >> Changes in v3: >> + None >> >> Changes in v2: >> + Used 'struct of_device_id's .data attribute [Lee Jones] >> >> drivers/mfd/Kconfig | 12 +++++++ >> drivers/mfd/Makefile | 1 + >> drivers/mfd/smpro-mfd.c | 74 +++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 87 insertions(+) >> create mode 100644 drivers/mfd/smpro-mfd.c >> >> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig >> index 6a3fd2d75f96..25e502cca32f 100644 >> --- a/drivers/mfd/Kconfig >> +++ b/drivers/mfd/Kconfig >> @@ -77,6 +77,18 @@ config MFD_AS3711 >> help >> Support for the AS3711 PMIC from AMS >> +config MFD_SMPRO >> + tristate "Ampere Computing MFD SMpro core driver" >> + depends on I2C >> + select MFD_CORE >> + select REGMAP_I2C >> + help >> + Say yes here to enable SMpro driver support for Ampere's Altra >> + processor family. >> + >> + Ampere's Altra SMpro exposes an I2C regmap interface that can >> + be accessed by child devices. >> + >> config MFD_AS3722 >> tristate "ams AS3722 Power Management IC" >> select MFD_CORE >> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile >> index 8116c19d5fd4..046fd36de85a 100644 >> --- a/drivers/mfd/Makefile >> +++ b/drivers/mfd/Makefile >> @@ -268,6 +268,7 @@ obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o >> obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o >> obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o >> +obj-$(CONFIG_MFD_SMPRO) += smpro-mfd.o >> obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o >> obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o >> diff --git a/drivers/mfd/smpro-mfd.c b/drivers/mfd/smpro-mfd.c >> new file mode 100644 >> index 000000000000..b0cd3c248507 >> --- /dev/null >> +++ b/drivers/mfd/smpro-mfd.c >> @@ -0,0 +1,74 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * Ampere Altra Family SMPro MFD - I2C >> + * >> + * Copyright (c) 2021, Ampere Computing LLC >> + * >> + * Author: Quan Nguyen <quan@os.amperecomputing..com> >> + */ >> + >> +#include <linux/i2c.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/of_platform.h> >> +#include <linux/mfd/core.h> >> +#include <linux/regmap.h> >> + >> +/* Identification Registers */ >> +#define MANUFACTURER_ID_REG 0x02 >> +#define AMPERE_MANUFACTURER_ID 0xCD3A >> + >> +static const struct regmap_config simple_word_regmap_config = { >> + .reg_bits = 8, >> + .val_bits = 16, >> +}; >> + >> +static const struct mfd_cell smpro_devs[] = { >> + MFD_CELL_NAME("smpro-hwmon"), >> +}; >> + >> +static int smpro_mfd_probe(struct i2c_client *i2c) >> +{ >> + const struct regmap_config *config; >> + struct regmap *regmap; >> + unsigned int val; >> + int ret; >> + >> + config = device_get_match_data(&i2c->dev); >> + if (!config) >> + config = &simple_word_regmap_config; >> + >> + regmap = devm_regmap_init_i2c(i2c, config); >> + if (IS_ERR(regmap)) >> + return PTR_ERR(regmap); >> + >> + /* Check for valid ID */ >> + ret = regmap_read(regmap, MANUFACTURER_ID_REG, &val); >> + if (ret) >> + return ret; >> + >> + if (val != AMPERE_MANUFACTURER_ID) >> + return -ENODEV; >> + >> + return devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, >> + smpro_devs, ARRAY_SIZE(smpro_devs), NULL, 0, NULL); >> +} >> + >> +static const struct of_device_id smpro_mfd_of_match[] = { >> + { .compatible = "ampere,smpro", .data = >> &simple_word_regmap_config }, >> + {} >> +}; >> +MODULE_DEVICE_TABLE(of, smpro_mfd_of_match); >> + >> +static struct i2c_driver smpro_mfd_driver = { >> + .probe_new = smpro_mfd_probe, >> + .driver = { >> + .name = "smpro-mfd-i2c", >> + .of_match_table = smpro_mfd_of_match, >> + }, >> +}; >> +module_i2c_driver(smpro_mfd_driver); >> + >> +MODULE_AUTHOR("Quan Nguyen <quan@os.amperecomputing.com>"); >> +MODULE_DESCRIPTION("SMPRO MFD - I2C driver"); >> +MODULE_LICENSE("GPL v2"); >> > ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver 2021-07-13 6:00 [PATCH v5 0/4] Add Ampere's Altra SMPro hwmon driver Quan Nguyen 2021-07-13 6:00 ` [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver Quan Nguyen 2021-07-13 6:00 ` [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro " Quan Nguyen @ 2021-07-13 6:00 ` Quan Nguyen 2021-07-13 15:28 ` Guenter Roeck 2021-07-13 6:00 ` [PATCH v5 4/4] docs: hwmon: (smpro-hwmon) Add documentation Quan Nguyen 3 siblings, 1 reply; 11+ messages in thread From: Quan Nguyen @ 2021-07-13 6:00 UTC (permalink / raw) To: Joel Stanley, Andrew Jeffery, Jean Delvare, Guenter Roeck, Rob Herring, Lee Jones, Jonathan Corbet, linux-hwmon, devicetree, linux-kernel, linux-doc, linux-aspeed, openbmc Cc: Open Source Submission, Thang Q . Nguyen, Phong Vo This commit adds support for Ampere SMpro hwmon driver. This driver supports accessing various CPU sensors provided by the SMpro co-processor including temperature, power, voltages, and current. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> --- Changes in v5: + Drop ManufacturerID checking when probe as it was checked during smpro-mfd probing [Quan] + Drop the use of register offset [Quan] + Removed the use of compatible string as it is instantiated by smpro-mfd driver [Quan] + Thanks Guenter for the Reviewed-by in last version, but it was not added because there's some changes in this version. Really appreciate if you could help again, thank you. Changes in v4: + Returned regmap_read() error code [Guenter] Changes in v3: + Handled negative temperature value [Guenter] + Returned -ENODEV if Manufacturer ID is wrong [Guenter] + Refactored smpro_read_string() and smpro_temp_read() [Guenter] + Removed smpro_write() function [Guenter] + Added minor refactor changes [Quan] Changes in v2: + Removed "virtual" sensors [Guenter] + Reported SOC_TDP as "Socket TDP" using max attributes [Guenter] + Corrected return error code when host is turn off [Guenter] + Reported MEM HOT Threshold for all DIMMs as temp*_crit [Guenter] + Removed license info as SPDX-License-Identifier existed [Guenter] + Added is_visible() support [Guenter] + Used HWMON_CHANNEL_INFO() macro and LABEL attributes [Guenter] + Made is_valid_id() return boolean [Guenter] + Returned -EPROBE_DEFER when smpro reg inaccessible [Guenter] + Removed unnecessary error message when dev register fail [Guenter] + Removed Socket TDP sensor [Quan] + Included sensor type and channel in labels [Quan] + Refactorized code to fix checkpatch.pl --strict complaint [Quan] drivers/hwmon/Kconfig | 8 + drivers/hwmon/Makefile | 1 + drivers/hwmon/smpro-hwmon.c | 463 ++++++++++++++++++++++++++++++++++++ 3 files changed, 472 insertions(+) create mode 100644 drivers/hwmon/smpro-hwmon.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index e3675377bc5d..903c5ef79a5a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -67,6 +67,14 @@ config SENSORS_ABITUGURU3 This driver can also be built as a module. If so, the module will be called abituguru3. +config SENSORS_SMPRO + tristate "Ampere's Altra SMpro hardware monitoring driver" + depends on MFD_SMPRO + help + If you say yes here you get support for the thermal, voltage, + current and power sensors of Ampere's Altra processor family SoC + with SMpro co-processor. + config SENSORS_AD7314 tristate "Analog Devices AD7314 and compatibles" depends on SPI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index d712c61c1f5e..9de5cd9911b0 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -175,6 +175,7 @@ obj-$(CONFIG_SENSORS_SHT4x) += sht4x.o obj-$(CONFIG_SENSORS_SHTC1) += shtc1.o obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o obj-$(CONFIG_SENSORS_SMM665) += smm665.o +obj-$(CONFIG_SENSORS_SMPRO) += smpro-hwmon.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o diff --git a/drivers/hwmon/smpro-hwmon.c b/drivers/hwmon/smpro-hwmon.c new file mode 100644 index 000000000000..b01ceea33ddd --- /dev/null +++ b/drivers/hwmon/smpro-hwmon.c @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Ampere Computing SoC's SMPro Hardware Monitoring Driver + * + * Copyright (c) 2021, Ampere Computing LLC + */ +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> + +/* Logical Power Sensor Registers */ +#define SOC_TEMP 0x10 +#define SOC_VRD_TEMP 0x11 +#define DIMM_VRD_TEMP 0x12 +#define CORE_VRD_TEMP 0x13 +#define CH0_DIMM_TEMP 0x14 +#define CH1_DIMM_TEMP 0x15 +#define CH2_DIMM_TEMP 0x16 +#define CH3_DIMM_TEMP 0x17 +#define CH4_DIMM_TEMP 0x18 +#define CH5_DIMM_TEMP 0x19 +#define CH6_DIMM_TEMP 0x1A +#define CH7_DIMM_TEMP 0x1B +#define RCA_VRD_TEMP 0x1C + +#define CORE_VRD_PWR 0x20 +#define SOC_PWR 0x21 +#define DIMM_VRD1_PWR 0x22 +#define DIMM_VRD2_PWR 0x23 +#define CORE_VRD_PWR_MW 0x26 +#define SOC_PWR_MW 0x27 +#define DIMM_VRD1_PWR_MW 0x28 +#define DIMM_VRD2_PWR_MW 0x29 +#define RCA_VRD_PWR 0x2A +#define RCA_VRD_PWR_MW 0x2B + +#define MEM_HOT_THRESHOLD 0x32 +#define SOC_VR_HOT_THRESHOLD 0x33 +#define CORE_VRD_VOLT 0x34 +#define SOC_VRD_VOLT 0x35 +#define DIMM_VRD1_VOLT 0x36 +#define DIMM_VRD2_VOLT 0x37 +#define RCA_VRD_VOLT 0x38 + +#define CORE_VRD_CURR 0x39 +#define SOC_VRD_CURR 0x3A +#define DIMM_VRD1_CURR 0x3B +#define DIMM_VRD2_CURR 0x3C +#define RCA_VRD_CURR 0x3D + +struct smpro_hwmon { + struct regmap *regmap; +}; + +struct smpro_sensor { + const u8 reg; + const u8 reg_ext; + const char *label; +}; + +static const struct smpro_sensor temperature[] = { + { + .reg = SOC_TEMP, + .label = "temp1 SoC" + }, + { + .reg = SOC_VRD_TEMP, + .reg_ext = SOC_VR_HOT_THRESHOLD, + .label = "temp2 SoC VRD" + }, + { + .reg = DIMM_VRD_TEMP, + .label = "temp3 DIMM VRD" + }, + { + .reg = CORE_VRD_TEMP, + .label = "temp4 CORE VRD" + }, + { + .reg = CH0_DIMM_TEMP, + .reg_ext = MEM_HOT_THRESHOLD, + .label = "temp5 CH0 DIMM" + }, + { + .reg = CH1_DIMM_TEMP, + .reg_ext = MEM_HOT_THRESHOLD, + .label = "temp6 CH1 DIMM" + }, + { + .reg = CH2_DIMM_TEMP, + .reg_ext = MEM_HOT_THRESHOLD, + .label = "temp7 CH2 DIMM" + }, + { + .reg = CH3_DIMM_TEMP, + .reg_ext = MEM_HOT_THRESHOLD, + .label = "temp8 CH3 DIMM" + }, + { + .reg = CH4_DIMM_TEMP, + .reg_ext = MEM_HOT_THRESHOLD, + .label = "temp9 CH4 DIMM" + }, + { + .reg = CH5_DIMM_TEMP, + .reg_ext = MEM_HOT_THRESHOLD, + .label = "temp10 CH5 DIMM" + }, + { + .reg = CH6_DIMM_TEMP, + .reg_ext = MEM_HOT_THRESHOLD, + .label = "temp11 CH6 DIMM" + }, + { + .reg = CH7_DIMM_TEMP, + .reg_ext = MEM_HOT_THRESHOLD, + .label = "temp12 CH7 DIMM" + }, + { + .reg = RCA_VRD_TEMP, + .label = "temp13 RCA VRD" + }, +}; + +static const struct smpro_sensor voltage[] = { + { + .reg = CORE_VRD_VOLT, + .label = "vout0 CORE VRD" + }, + { + .reg = SOC_VRD_VOLT, + .label = "vout1 SoC VRD" + }, + { + .reg = DIMM_VRD1_VOLT, + .label = "vout2 DIMM VRD1" + }, + { + .reg = DIMM_VRD2_VOLT, + .label = "vout3 DIMM VRD2" + }, + { + .reg = RCA_VRD_VOLT, + .label = "vout4 RCA VRD" + }, +}; + +static const struct smpro_sensor curr_sensor[] = { + { + .reg = CORE_VRD_CURR, + .label = "iout1 CORE VRD" + }, + { + .reg = SOC_VRD_CURR, + .label = "iout2 SoC VRD" + }, + { + .reg = DIMM_VRD1_CURR, + .label = "iout3 DIMM VRD1" + }, + { + .reg = DIMM_VRD2_CURR, + .label = "iout4 DIMM VRD2" + }, + { + .reg = RCA_VRD_CURR, + .label = "iout5 RCA VRD" + }, +}; + +static const struct smpro_sensor power[] = { + { + .reg = CORE_VRD_PWR, + .reg_ext = CORE_VRD_PWR_MW, + .label = "power1 CORE VRD" + }, + { + .reg = SOC_PWR, + .reg_ext = SOC_PWR_MW, + .label = "power2 SoC" + }, + { + .reg = DIMM_VRD1_PWR, + .reg_ext = DIMM_VRD1_PWR_MW, + .label = "power3 DIMM VRD1" + }, + { + .reg = DIMM_VRD2_PWR, + .reg_ext = DIMM_VRD2_PWR_MW, + .label = "power4 DIMM VRD2" + }, + { + .reg = RCA_VRD_PWR, + .reg_ext = RCA_VRD_PWR_MW, + .label = "power5 RCA VRD" + }, +}; + +static int smpro_read_temp(struct device *dev, u32 attr, int channel, long *val) +{ + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); + unsigned int value; + int ret; + + switch (attr) { + case hwmon_temp_input: + ret = regmap_read(hwmon->regmap, temperature[channel].reg, &value); + if (ret) + return ret; + break; + case hwmon_temp_crit: + ret = regmap_read(hwmon->regmap, temperature[channel].reg_ext, &value); + if (ret) + return ret; + break; + default: + return -EOPNOTSUPP; + } + + *val = sign_extend32(value, 8) * 1000; + return 0; +} + +static int smpro_read_in(struct device *dev, u32 attr, int channel, long *val) +{ + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); + unsigned int value; + int ret; + + switch (attr) { + case hwmon_in_input: + ret = regmap_read(hwmon->regmap, voltage[channel].reg, &value); + if (ret < 0) + return ret; + /* 15-bit value in 1mV */ + *val = value & 0x7fff; + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int smpro_read_curr(struct device *dev, u32 attr, int channel, long *val) +{ + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); + unsigned int value; + int ret; + + switch (attr) { + case hwmon_curr_input: + ret = regmap_read(hwmon->regmap, curr_sensor[channel].reg, &value); + if (ret < 0) + return ret; + /* Scale reported by the hardware is 1mA */ + *val = value & 0x7fff; + return 0; + default: + return -EOPNOTSUPP; + } +} + +static int smpro_read_power(struct device *dev, u32 attr, int channel, long *val_pwr) +{ + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); + unsigned int val = 0, val_mw = 0; + int ret; + + switch (attr) { + case hwmon_power_input: + ret = regmap_read(hwmon->regmap, power[channel].reg, &val); + if (ret) + return ret; + + ret = regmap_read(hwmon->regmap, power[channel].reg_ext, &val_mw); + if (ret) + return ret; + + *val_pwr = val * 1000000 + val_mw * 1000; + return 0; + + default: + return -EOPNOTSUPP; + } +} + +static int smpro_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + switch (type) { + case hwmon_temp: + return smpro_read_temp(dev, attr, channel, val); + case hwmon_in: + return smpro_read_in(dev, attr, channel, val); + case hwmon_power: + return smpro_read_power(dev, attr, channel, val); + case hwmon_curr: + return smpro_read_curr(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} + +static int smpro_read_string(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_label: + *str = temperature[channel].label; + return 0; + default: + break; + } + break; + + case hwmon_in: + switch (attr) { + case hwmon_in_label: + *str = voltage[channel].label; + return 0; + default: + break; + } + break; + + case hwmon_curr: + switch (attr) { + case hwmon_curr_label: + *str = curr_sensor[channel].label; + return 0; + default: + break; + } + break; + + case hwmon_power: + switch (attr) { + case hwmon_power_label: + *str = power[channel].label; + return 0; + default: + break; + } + break; + default: + break; + } + + return -EOPNOTSUPP; +} + +static umode_t smpro_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + const struct smpro_hwmon *hwmon = data; + unsigned int value; + int ret; + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + case hwmon_temp_label: + case hwmon_temp_crit: + ret = regmap_read(hwmon->regmap, temperature[channel].reg, &value); + if (ret || value == 0xFFFF) + return 0; + break; + } + default: + break; + } + + return 0444; +} + +static const struct hwmon_channel_info *smpro_info[] = { + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, + HWMON_T_INPUT | HWMON_T_LABEL), + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL), + HWMON_CHANNEL_INFO(power, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL, + HWMON_P_INPUT | HWMON_P_LABEL), + HWMON_CHANNEL_INFO(curr, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL, + HWMON_C_INPUT | HWMON_C_LABEL), + NULL +}; + +static const struct hwmon_ops smpro_hwmon_ops = { + .is_visible = smpro_is_visible, + .read = smpro_read, + .read_string = smpro_read_string, +}; + +static const struct hwmon_chip_info smpro_chip_info = { + .ops = &smpro_hwmon_ops, + .info = smpro_info, +}; + +static int smpro_hwmon_probe(struct platform_device *pdev) +{ + struct smpro_hwmon *hwmon; + struct device *hwmon_dev; + + hwmon = devm_kzalloc(&pdev->dev, sizeof(struct smpro_hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + hwmon->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!hwmon->regmap) + return -ENODEV; + + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, "smpro_hwmon", + hwmon, &smpro_chip_info, NULL); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static struct platform_driver smpro_hwmon_driver = { + .probe = smpro_hwmon_probe, + .driver = { + .name = "smpro-hwmon", + }, +}; + +module_platform_driver(smpro_hwmon_driver); + +MODULE_AUTHOR("Thu Nguyen <thu@os.amperecomputing.com>"); +MODULE_AUTHOR("Quan Nguyen <quan@os.amperecomputing.com>"); +MODULE_DESCRIPTION("Ampere Altra SMPro hwmon driver"); +MODULE_LICENSE("GPL v2"); -- 2.28.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver 2021-07-13 6:00 ` [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver Quan Nguyen @ 2021-07-13 15:28 ` Guenter Roeck 2021-07-13 23:45 ` Quan Nguyen 0 siblings, 1 reply; 11+ messages in thread From: Guenter Roeck @ 2021-07-13 15:28 UTC (permalink / raw) To: Quan Nguyen, Joel Stanley, Andrew Jeffery, Jean Delvare, Rob Herring, Lee Jones, Jonathan Corbet, linux-hwmon, devicetree, linux-kernel, linux-doc, linux-aspeed, openbmc Cc: Open Source Submission, Thang Q . Nguyen, Phong Vo On 7/12/21 11:00 PM, Quan Nguyen wrote: > This commit adds support for Ampere SMpro hwmon driver. This driver > supports accessing various CPU sensors provided by the SMpro co-processor > including temperature, power, voltages, and current. > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> For my reference: Reviewed-by: Guenter Roeck <linux@roeck-us.net> > --- > Changes in v5: > + Drop ManufacturerID checking when probe as it was checked during > smpro-mfd probing [Quan] > + Drop the use of register offset [Quan] > + Removed the use of compatible string as it is instantiated by > smpro-mfd driver [Quan] > + Thanks Guenter for the Reviewed-by in last version, but it was > not added because there's some changes in this version. Really > appreciate if you could help again, thank you. > > Changes in v4: > + Returned regmap_read() error code [Guenter] > > Changes in v3: > + Handled negative temperature value [Guenter] > + Returned -ENODEV if Manufacturer ID is wrong [Guenter] > + Refactored smpro_read_string() and smpro_temp_read() [Guenter] > + Removed smpro_write() function [Guenter] > + Added minor refactor changes [Quan] > > Changes in v2: > + Removed "virtual" sensors [Guenter] > + Reported SOC_TDP as "Socket TDP" using max attributes [Guenter] > + Corrected return error code when host is turn off [Guenter] > + Reported MEM HOT Threshold for all DIMMs as temp*_crit [Guenter] > + Removed license info as SPDX-License-Identifier existed [Guenter] > + Added is_visible() support [Guenter] > + Used HWMON_CHANNEL_INFO() macro and LABEL attributes [Guenter] > + Made is_valid_id() return boolean [Guenter] > + Returned -EPROBE_DEFER when smpro reg inaccessible [Guenter] > + Removed unnecessary error message when dev register fail [Guenter] > + Removed Socket TDP sensor [Quan] > + Included sensor type and channel in labels [Quan] > + Refactorized code to fix checkpatch.pl --strict complaint [Quan] > > drivers/hwmon/Kconfig | 8 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/smpro-hwmon.c | 463 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 472 insertions(+) > create mode 100644 drivers/hwmon/smpro-hwmon.c > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index e3675377bc5d..903c5ef79a5a 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -67,6 +67,14 @@ config SENSORS_ABITUGURU3 > This driver can also be built as a module. If so, the module > will be called abituguru3. > > +config SENSORS_SMPRO > + tristate "Ampere's Altra SMpro hardware monitoring driver" > + depends on MFD_SMPRO > + help > + If you say yes here you get support for the thermal, voltage, > + current and power sensors of Ampere's Altra processor family SoC > + with SMpro co-processor. > + > config SENSORS_AD7314 > tristate "Analog Devices AD7314 and compatibles" > depends on SPI > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index d712c61c1f5e..9de5cd9911b0 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -175,6 +175,7 @@ obj-$(CONFIG_SENSORS_SHT4x) += sht4x.o > obj-$(CONFIG_SENSORS_SHTC1) += shtc1.o > obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o > obj-$(CONFIG_SENSORS_SMM665) += smm665.o > +obj-$(CONFIG_SENSORS_SMPRO) += smpro-hwmon.o > obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o > obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o > obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o > diff --git a/drivers/hwmon/smpro-hwmon.c b/drivers/hwmon/smpro-hwmon.c > new file mode 100644 > index 000000000000..b01ceea33ddd > --- /dev/null > +++ b/drivers/hwmon/smpro-hwmon.c > @@ -0,0 +1,463 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Ampere Computing SoC's SMPro Hardware Monitoring Driver > + * > + * Copyright (c) 2021, Ampere Computing LLC > + */ > +#include <linux/bitfield.h> > +#include <linux/bitops.h> > +#include <linux/hwmon.h> > +#include <linux/hwmon-sysfs.h> > +#include <linux/kernel.h> > +#include <linux/mod_devicetable.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/property.h> > +#include <linux/regmap.h> > + > +/* Logical Power Sensor Registers */ > +#define SOC_TEMP 0x10 > +#define SOC_VRD_TEMP 0x11 > +#define DIMM_VRD_TEMP 0x12 > +#define CORE_VRD_TEMP 0x13 > +#define CH0_DIMM_TEMP 0x14 > +#define CH1_DIMM_TEMP 0x15 > +#define CH2_DIMM_TEMP 0x16 > +#define CH3_DIMM_TEMP 0x17 > +#define CH4_DIMM_TEMP 0x18 > +#define CH5_DIMM_TEMP 0x19 > +#define CH6_DIMM_TEMP 0x1A > +#define CH7_DIMM_TEMP 0x1B > +#define RCA_VRD_TEMP 0x1C > + > +#define CORE_VRD_PWR 0x20 > +#define SOC_PWR 0x21 > +#define DIMM_VRD1_PWR 0x22 > +#define DIMM_VRD2_PWR 0x23 > +#define CORE_VRD_PWR_MW 0x26 > +#define SOC_PWR_MW 0x27 > +#define DIMM_VRD1_PWR_MW 0x28 > +#define DIMM_VRD2_PWR_MW 0x29 > +#define RCA_VRD_PWR 0x2A > +#define RCA_VRD_PWR_MW 0x2B > + > +#define MEM_HOT_THRESHOLD 0x32 > +#define SOC_VR_HOT_THRESHOLD 0x33 > +#define CORE_VRD_VOLT 0x34 > +#define SOC_VRD_VOLT 0x35 > +#define DIMM_VRD1_VOLT 0x36 > +#define DIMM_VRD2_VOLT 0x37 > +#define RCA_VRD_VOLT 0x38 > + > +#define CORE_VRD_CURR 0x39 > +#define SOC_VRD_CURR 0x3A > +#define DIMM_VRD1_CURR 0x3B > +#define DIMM_VRD2_CURR 0x3C > +#define RCA_VRD_CURR 0x3D > + > +struct smpro_hwmon { > + struct regmap *regmap; > +}; > + > +struct smpro_sensor { > + const u8 reg; > + const u8 reg_ext; > + const char *label; > +}; > + > +static const struct smpro_sensor temperature[] = { > + { > + .reg = SOC_TEMP, > + .label = "temp1 SoC" > + }, > + { > + .reg = SOC_VRD_TEMP, > + .reg_ext = SOC_VR_HOT_THRESHOLD, > + .label = "temp2 SoC VRD" > + }, > + { > + .reg = DIMM_VRD_TEMP, > + .label = "temp3 DIMM VRD" > + }, > + { > + .reg = CORE_VRD_TEMP, > + .label = "temp4 CORE VRD" > + }, > + { > + .reg = CH0_DIMM_TEMP, > + .reg_ext = MEM_HOT_THRESHOLD, > + .label = "temp5 CH0 DIMM" > + }, > + { > + .reg = CH1_DIMM_TEMP, > + .reg_ext = MEM_HOT_THRESHOLD, > + .label = "temp6 CH1 DIMM" > + }, > + { > + .reg = CH2_DIMM_TEMP, > + .reg_ext = MEM_HOT_THRESHOLD, > + .label = "temp7 CH2 DIMM" > + }, > + { > + .reg = CH3_DIMM_TEMP, > + .reg_ext = MEM_HOT_THRESHOLD, > + .label = "temp8 CH3 DIMM" > + }, > + { > + .reg = CH4_DIMM_TEMP, > + .reg_ext = MEM_HOT_THRESHOLD, > + .label = "temp9 CH4 DIMM" > + }, > + { > + .reg = CH5_DIMM_TEMP, > + .reg_ext = MEM_HOT_THRESHOLD, > + .label = "temp10 CH5 DIMM" > + }, > + { > + .reg = CH6_DIMM_TEMP, > + .reg_ext = MEM_HOT_THRESHOLD, > + .label = "temp11 CH6 DIMM" > + }, > + { > + .reg = CH7_DIMM_TEMP, > + .reg_ext = MEM_HOT_THRESHOLD, > + .label = "temp12 CH7 DIMM" > + }, > + { > + .reg = RCA_VRD_TEMP, > + .label = "temp13 RCA VRD" > + }, > +}; > + > +static const struct smpro_sensor voltage[] = { > + { > + .reg = CORE_VRD_VOLT, > + .label = "vout0 CORE VRD" > + }, > + { > + .reg = SOC_VRD_VOLT, > + .label = "vout1 SoC VRD" > + }, > + { > + .reg = DIMM_VRD1_VOLT, > + .label = "vout2 DIMM VRD1" > + }, > + { > + .reg = DIMM_VRD2_VOLT, > + .label = "vout3 DIMM VRD2" > + }, > + { > + .reg = RCA_VRD_VOLT, > + .label = "vout4 RCA VRD" > + }, > +}; > + > +static const struct smpro_sensor curr_sensor[] = { > + { > + .reg = CORE_VRD_CURR, > + .label = "iout1 CORE VRD" > + }, > + { > + .reg = SOC_VRD_CURR, > + .label = "iout2 SoC VRD" > + }, > + { > + .reg = DIMM_VRD1_CURR, > + .label = "iout3 DIMM VRD1" > + }, > + { > + .reg = DIMM_VRD2_CURR, > + .label = "iout4 DIMM VRD2" > + }, > + { > + .reg = RCA_VRD_CURR, > + .label = "iout5 RCA VRD" > + }, > +}; > + > +static const struct smpro_sensor power[] = { > + { > + .reg = CORE_VRD_PWR, > + .reg_ext = CORE_VRD_PWR_MW, > + .label = "power1 CORE VRD" > + }, > + { > + .reg = SOC_PWR, > + .reg_ext = SOC_PWR_MW, > + .label = "power2 SoC" > + }, > + { > + .reg = DIMM_VRD1_PWR, > + .reg_ext = DIMM_VRD1_PWR_MW, > + .label = "power3 DIMM VRD1" > + }, > + { > + .reg = DIMM_VRD2_PWR, > + .reg_ext = DIMM_VRD2_PWR_MW, > + .label = "power4 DIMM VRD2" > + }, > + { > + .reg = RCA_VRD_PWR, > + .reg_ext = RCA_VRD_PWR_MW, > + .label = "power5 RCA VRD" > + }, > +}; > + > +static int smpro_read_temp(struct device *dev, u32 attr, int channel, long *val) > +{ > + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); > + unsigned int value; > + int ret; > + > + switch (attr) { > + case hwmon_temp_input: > + ret = regmap_read(hwmon->regmap, temperature[channel].reg, &value); > + if (ret) > + return ret; > + break; > + case hwmon_temp_crit: > + ret = regmap_read(hwmon->regmap, temperature[channel].reg_ext, &value); > + if (ret) > + return ret; > + break; > + default: > + return -EOPNOTSUPP; > + } > + > + *val = sign_extend32(value, 8) * 1000; > + return 0; > +} > + > +static int smpro_read_in(struct device *dev, u32 attr, int channel, long *val) > +{ > + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); > + unsigned int value; > + int ret; > + > + switch (attr) { > + case hwmon_in_input: > + ret = regmap_read(hwmon->regmap, voltage[channel].reg, &value); > + if (ret < 0) > + return ret; > + /* 15-bit value in 1mV */ > + *val = value & 0x7fff; > + return 0; > + default: > + return -EOPNOTSUPP; > + } > +} > + > +static int smpro_read_curr(struct device *dev, u32 attr, int channel, long *val) > +{ > + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); > + unsigned int value; > + int ret; > + > + switch (attr) { > + case hwmon_curr_input: > + ret = regmap_read(hwmon->regmap, curr_sensor[channel].reg, &value); > + if (ret < 0) > + return ret; > + /* Scale reported by the hardware is 1mA */ > + *val = value & 0x7fff; > + return 0; > + default: > + return -EOPNOTSUPP; > + } > +} > + > +static int smpro_read_power(struct device *dev, u32 attr, int channel, long *val_pwr) > +{ > + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); > + unsigned int val = 0, val_mw = 0; > + int ret; > + > + switch (attr) { > + case hwmon_power_input: > + ret = regmap_read(hwmon->regmap, power[channel].reg, &val); > + if (ret) > + return ret; > + > + ret = regmap_read(hwmon->regmap, power[channel].reg_ext, &val_mw); > + if (ret) > + return ret; > + > + *val_pwr = val * 1000000 + val_mw * 1000; > + return 0; > + > + default: > + return -EOPNOTSUPP; > + } > +} > + > +static int smpro_read(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long *val) > +{ > + switch (type) { > + case hwmon_temp: > + return smpro_read_temp(dev, attr, channel, val); > + case hwmon_in: > + return smpro_read_in(dev, attr, channel, val); > + case hwmon_power: > + return smpro_read_power(dev, attr, channel, val); > + case hwmon_curr: > + return smpro_read_curr(dev, attr, channel, val); > + default: > + return -EOPNOTSUPP; > + } > +} > + > +static int smpro_read_string(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, const char **str) > +{ > + switch (type) { > + case hwmon_temp: > + switch (attr) { > + case hwmon_temp_label: > + *str = temperature[channel].label; > + return 0; > + default: > + break; > + } > + break; > + > + case hwmon_in: > + switch (attr) { > + case hwmon_in_label: > + *str = voltage[channel].label; > + return 0; > + default: > + break; > + } > + break; > + > + case hwmon_curr: > + switch (attr) { > + case hwmon_curr_label: > + *str = curr_sensor[channel].label; > + return 0; > + default: > + break; > + } > + break; > + > + case hwmon_power: > + switch (attr) { > + case hwmon_power_label: > + *str = power[channel].label; > + return 0; > + default: > + break; > + } > + break; > + default: > + break; > + } > + > + return -EOPNOTSUPP; > +} > + > +static umode_t smpro_is_visible(const void *data, enum hwmon_sensor_types type, > + u32 attr, int channel) > +{ > + const struct smpro_hwmon *hwmon = data; > + unsigned int value; > + int ret; > + > + switch (type) { > + case hwmon_temp: > + switch (attr) { > + case hwmon_temp_input: > + case hwmon_temp_label: > + case hwmon_temp_crit: > + ret = regmap_read(hwmon->regmap, temperature[channel].reg, &value); > + if (ret || value == 0xFFFF) > + return 0; > + break; > + } > + default: > + break; > + } > + > + return 0444; > +} > + > +static const struct hwmon_channel_info *smpro_info[] = { > + HWMON_CHANNEL_INFO(temp, > + HWMON_T_INPUT | HWMON_T_LABEL, > + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, > + HWMON_T_INPUT | HWMON_T_LABEL, > + HWMON_T_INPUT | HWMON_T_LABEL, > + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, > + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, > + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, > + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, > + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, > + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, > + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, > + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, > + HWMON_T_INPUT | HWMON_T_LABEL), > + HWMON_CHANNEL_INFO(in, > + HWMON_I_INPUT | HWMON_I_LABEL, > + HWMON_I_INPUT | HWMON_I_LABEL, > + HWMON_I_INPUT | HWMON_I_LABEL, > + HWMON_I_INPUT | HWMON_I_LABEL, > + HWMON_I_INPUT | HWMON_I_LABEL), > + HWMON_CHANNEL_INFO(power, > + HWMON_P_INPUT | HWMON_P_LABEL, > + HWMON_P_INPUT | HWMON_P_LABEL, > + HWMON_P_INPUT | HWMON_P_LABEL, > + HWMON_P_INPUT | HWMON_P_LABEL, > + HWMON_P_INPUT | HWMON_P_LABEL), > + HWMON_CHANNEL_INFO(curr, > + HWMON_C_INPUT | HWMON_C_LABEL, > + HWMON_C_INPUT | HWMON_C_LABEL, > + HWMON_C_INPUT | HWMON_C_LABEL, > + HWMON_C_INPUT | HWMON_C_LABEL, > + HWMON_C_INPUT | HWMON_C_LABEL), > + NULL > +}; > + > +static const struct hwmon_ops smpro_hwmon_ops = { > + .is_visible = smpro_is_visible, > + .read = smpro_read, > + .read_string = smpro_read_string, > +}; > + > +static const struct hwmon_chip_info smpro_chip_info = { > + .ops = &smpro_hwmon_ops, > + .info = smpro_info, > +}; > + > +static int smpro_hwmon_probe(struct platform_device *pdev) > +{ > + struct smpro_hwmon *hwmon; > + struct device *hwmon_dev; > + > + hwmon = devm_kzalloc(&pdev->dev, sizeof(struct smpro_hwmon), GFP_KERNEL); > + if (!hwmon) > + return -ENOMEM; > + > + hwmon->regmap = dev_get_regmap(pdev->dev.parent, NULL); > + if (!hwmon->regmap) > + return -ENODEV; > + > + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, "smpro_hwmon", > + hwmon, &smpro_chip_info, NULL); > + > + return PTR_ERR_OR_ZERO(hwmon_dev); > +} > + > +static struct platform_driver smpro_hwmon_driver = { > + .probe = smpro_hwmon_probe, > + .driver = { > + .name = "smpro-hwmon", > + }, > +}; > + > +module_platform_driver(smpro_hwmon_driver); > + > +MODULE_AUTHOR("Thu Nguyen <thu@os.amperecomputing.com>"); > +MODULE_AUTHOR("Quan Nguyen <quan@os.amperecomputing.com>"); > +MODULE_DESCRIPTION("Ampere Altra SMPro hwmon driver"); > +MODULE_LICENSE("GPL v2"); > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver 2021-07-13 15:28 ` Guenter Roeck @ 2021-07-13 23:45 ` Quan Nguyen 0 siblings, 0 replies; 11+ messages in thread From: Quan Nguyen @ 2021-07-13 23:45 UTC (permalink / raw) To: Guenter Roeck, Joel Stanley, Andrew Jeffery, Jean Delvare, Rob Herring, Lee Jones, Jonathan Corbet, linux-hwmon, devicetree, linux-kernel, linux-doc, linux-aspeed, openbmc Cc: Open Source Submission, Thang Q . Nguyen, Phong Vo On 13/07/2021 22:28, Guenter Roeck wrote: > On 7/12/21 11:00 PM, Quan Nguyen wrote: >> This commit adds support for Ampere SMpro hwmon driver. This driver >> supports accessing various CPU sensors provided by the SMpro co-processor >> including temperature, power, voltages, and current. >> >> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > > For my reference: > > Reviewed-by: Guenter Roeck <linux@roeck-us.net> > Thanks for the review. - Quan >> --- >> Changes in v5: >> + Drop ManufacturerID checking when probe as it was checked during >> smpro-mfd probing [Quan] >> + Drop the use of register offset [Quan] >> + Removed the use of compatible string as it is instantiated by >> smpro-mfd driver [Quan] >> + Thanks Guenter for the Reviewed-by in last version, but it was >> not added because there's some changes in this version. Really >> appreciate if you could help again, thank you. >> >> Changes in v4: >> + Returned regmap_read() error code [Guenter] >> >> Changes in v3: >> + Handled negative temperature value [Guenter] >> + Returned -ENODEV if Manufacturer ID is wrong [Guenter] >> + Refactored smpro_read_string() and smpro_temp_read() [Guenter] >> + Removed smpro_write() function [Guenter] >> + Added minor refactor changes [Quan] >> >> Changes in v2: >> + Removed "virtual" sensors [Guenter] >> + Reported SOC_TDP as "Socket TDP" using max attributes [Guenter] >> + Corrected return error code when host is turn off [Guenter] >> + Reported MEM HOT Threshold for all DIMMs as temp*_crit [Guenter] >> + Removed license info as SPDX-License-Identifier existed [Guenter] >> + Added is_visible() support [Guenter] >> + Used HWMON_CHANNEL_INFO() macro and LABEL attributes [Guenter] >> + Made is_valid_id() return boolean [Guenter] >> + Returned -EPROBE_DEFER when smpro reg inaccessible [Guenter] >> + Removed unnecessary error message when dev register fail [Guenter] >> + Removed Socket TDP sensor [Quan] >> + Included sensor type and channel in labels [Quan] >> + Refactorized code to fix checkpatch.pl --strict complaint [Quan] >> >> drivers/hwmon/Kconfig | 8 + >> drivers/hwmon/Makefile | 1 + >> drivers/hwmon/smpro-hwmon.c | 463 ++++++++++++++++++++++++++++++++++++ >> 3 files changed, 472 insertions(+) >> create mode 100644 drivers/hwmon/smpro-hwmon.c >> >> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig >> index e3675377bc5d..903c5ef79a5a 100644 >> --- a/drivers/hwmon/Kconfig >> +++ b/drivers/hwmon/Kconfig >> @@ -67,6 +67,14 @@ config SENSORS_ABITUGURU3 >> This driver can also be built as a module. If so, the module >> will be called abituguru3. >> +config SENSORS_SMPRO >> + tristate "Ampere's Altra SMpro hardware monitoring driver" >> + depends on MFD_SMPRO >> + help >> + If you say yes here you get support for the thermal, voltage, >> + current and power sensors of Ampere's Altra processor family SoC >> + with SMpro co-processor. >> + >> config SENSORS_AD7314 >> tristate "Analog Devices AD7314 and compatibles" >> depends on SPI >> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile >> index d712c61c1f5e..9de5cd9911b0 100644 >> --- a/drivers/hwmon/Makefile >> +++ b/drivers/hwmon/Makefile >> @@ -175,6 +175,7 @@ obj-$(CONFIG_SENSORS_SHT4x) += sht4x.o >> obj-$(CONFIG_SENSORS_SHTC1) += shtc1.o >> obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o >> obj-$(CONFIG_SENSORS_SMM665) += smm665.o >> +obj-$(CONFIG_SENSORS_SMPRO) += smpro-hwmon.o >> obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o >> obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o >> obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o >> diff --git a/drivers/hwmon/smpro-hwmon.c b/drivers/hwmon/smpro-hwmon.c >> new file mode 100644 >> index 000000000000..b01ceea33ddd >> --- /dev/null >> +++ b/drivers/hwmon/smpro-hwmon.c >> @@ -0,0 +1,463 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Ampere Computing SoC's SMPro Hardware Monitoring Driver >> + * >> + * Copyright (c) 2021, Ampere Computing LLC >> + */ >> +#include <linux/bitfield.h> >> +#include <linux/bitops.h> >> +#include <linux/hwmon.h> >> +#include <linux/hwmon-sysfs.h> >> +#include <linux/kernel.h> >> +#include <linux/mod_devicetable.h> >> +#include <linux/module.h> >> +#include <linux/platform_device.h> >> +#include <linux/property.h> >> +#include <linux/regmap.h> >> + >> +/* Logical Power Sensor Registers */ >> +#define SOC_TEMP 0x10 >> +#define SOC_VRD_TEMP 0x11 >> +#define DIMM_VRD_TEMP 0x12 >> +#define CORE_VRD_TEMP 0x13 >> +#define CH0_DIMM_TEMP 0x14 >> +#define CH1_DIMM_TEMP 0x15 >> +#define CH2_DIMM_TEMP 0x16 >> +#define CH3_DIMM_TEMP 0x17 >> +#define CH4_DIMM_TEMP 0x18 >> +#define CH5_DIMM_TEMP 0x19 >> +#define CH6_DIMM_TEMP 0x1A >> +#define CH7_DIMM_TEMP 0x1B >> +#define RCA_VRD_TEMP 0x1C >> + >> +#define CORE_VRD_PWR 0x20 >> +#define SOC_PWR 0x21 >> +#define DIMM_VRD1_PWR 0x22 >> +#define DIMM_VRD2_PWR 0x23 >> +#define CORE_VRD_PWR_MW 0x26 >> +#define SOC_PWR_MW 0x27 >> +#define DIMM_VRD1_PWR_MW 0x28 >> +#define DIMM_VRD2_PWR_MW 0x29 >> +#define RCA_VRD_PWR 0x2A >> +#define RCA_VRD_PWR_MW 0x2B >> + >> +#define MEM_HOT_THRESHOLD 0x32 >> +#define SOC_VR_HOT_THRESHOLD 0x33 >> +#define CORE_VRD_VOLT 0x34 >> +#define SOC_VRD_VOLT 0x35 >> +#define DIMM_VRD1_VOLT 0x36 >> +#define DIMM_VRD2_VOLT 0x37 >> +#define RCA_VRD_VOLT 0x38 >> + >> +#define CORE_VRD_CURR 0x39 >> +#define SOC_VRD_CURR 0x3A >> +#define DIMM_VRD1_CURR 0x3B >> +#define DIMM_VRD2_CURR 0x3C >> +#define RCA_VRD_CURR 0x3D >> + >> +struct smpro_hwmon { >> + struct regmap *regmap; >> +}; >> + >> +struct smpro_sensor { >> + const u8 reg; >> + const u8 reg_ext; >> + const char *label; >> +}; >> + >> +static const struct smpro_sensor temperature[] = { >> + { >> + .reg = SOC_TEMP, >> + .label = "temp1 SoC" >> + }, >> + { >> + .reg = SOC_VRD_TEMP, >> + .reg_ext = SOC_VR_HOT_THRESHOLD, >> + .label = "temp2 SoC VRD" >> + }, >> + { >> + .reg = DIMM_VRD_TEMP, >> + .label = "temp3 DIMM VRD" >> + }, >> + { >> + .reg = CORE_VRD_TEMP, >> + .label = "temp4 CORE VRD" >> + }, >> + { >> + .reg = CH0_DIMM_TEMP, >> + .reg_ext = MEM_HOT_THRESHOLD, >> + .label = "temp5 CH0 DIMM" >> + }, >> + { >> + .reg = CH1_DIMM_TEMP, >> + .reg_ext = MEM_HOT_THRESHOLD, >> + .label = "temp6 CH1 DIMM" >> + }, >> + { >> + .reg = CH2_DIMM_TEMP, >> + .reg_ext = MEM_HOT_THRESHOLD, >> + .label = "temp7 CH2 DIMM" >> + }, >> + { >> + .reg = CH3_DIMM_TEMP, >> + .reg_ext = MEM_HOT_THRESHOLD, >> + .label = "temp8 CH3 DIMM" >> + }, >> + { >> + .reg = CH4_DIMM_TEMP, >> + .reg_ext = MEM_HOT_THRESHOLD, >> + .label = "temp9 CH4 DIMM" >> + }, >> + { >> + .reg = CH5_DIMM_TEMP, >> + .reg_ext = MEM_HOT_THRESHOLD, >> + .label = "temp10 CH5 DIMM" >> + }, >> + { >> + .reg = CH6_DIMM_TEMP, >> + .reg_ext = MEM_HOT_THRESHOLD, >> + .label = "temp11 CH6 DIMM" >> + }, >> + { >> + .reg = CH7_DIMM_TEMP, >> + .reg_ext = MEM_HOT_THRESHOLD, >> + .label = "temp12 CH7 DIMM" >> + }, >> + { >> + .reg = RCA_VRD_TEMP, >> + .label = "temp13 RCA VRD" >> + }, >> +}; >> + >> +static const struct smpro_sensor voltage[] = { >> + { >> + .reg = CORE_VRD_VOLT, >> + .label = "vout0 CORE VRD" >> + }, >> + { >> + .reg = SOC_VRD_VOLT, >> + .label = "vout1 SoC VRD" >> + }, >> + { >> + .reg = DIMM_VRD1_VOLT, >> + .label = "vout2 DIMM VRD1" >> + }, >> + { >> + .reg = DIMM_VRD2_VOLT, >> + .label = "vout3 DIMM VRD2" >> + }, >> + { >> + .reg = RCA_VRD_VOLT, >> + .label = "vout4 RCA VRD" >> + }, >> +}; >> + >> +static const struct smpro_sensor curr_sensor[] = { >> + { >> + .reg = CORE_VRD_CURR, >> + .label = "iout1 CORE VRD" >> + }, >> + { >> + .reg = SOC_VRD_CURR, >> + .label = "iout2 SoC VRD" >> + }, >> + { >> + .reg = DIMM_VRD1_CURR, >> + .label = "iout3 DIMM VRD1" >> + }, >> + { >> + .reg = DIMM_VRD2_CURR, >> + .label = "iout4 DIMM VRD2" >> + }, >> + { >> + .reg = RCA_VRD_CURR, >> + .label = "iout5 RCA VRD" >> + }, >> +}; >> + >> +static const struct smpro_sensor power[] = { >> + { >> + .reg = CORE_VRD_PWR, >> + .reg_ext = CORE_VRD_PWR_MW, >> + .label = "power1 CORE VRD" >> + }, >> + { >> + .reg = SOC_PWR, >> + .reg_ext = SOC_PWR_MW, >> + .label = "power2 SoC" >> + }, >> + { >> + .reg = DIMM_VRD1_PWR, >> + .reg_ext = DIMM_VRD1_PWR_MW, >> + .label = "power3 DIMM VRD1" >> + }, >> + { >> + .reg = DIMM_VRD2_PWR, >> + .reg_ext = DIMM_VRD2_PWR_MW, >> + .label = "power4 DIMM VRD2" >> + }, >> + { >> + .reg = RCA_VRD_PWR, >> + .reg_ext = RCA_VRD_PWR_MW, >> + .label = "power5 RCA VRD" >> + }, >> +}; >> + >> +static int smpro_read_temp(struct device *dev, u32 attr, int channel, >> long *val) >> +{ >> + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); >> + unsigned int value; >> + int ret; >> + >> + switch (attr) { >> + case hwmon_temp_input: >> + ret = regmap_read(hwmon->regmap, temperature[channel].reg, >> &value); >> + if (ret) >> + return ret; >> + break; >> + case hwmon_temp_crit: >> + ret = regmap_read(hwmon->regmap, >> temperature[channel].reg_ext, &value); >> + if (ret) >> + return ret; >> + break; >> + default: >> + return -EOPNOTSUPP; >> + } >> + >> + *val = sign_extend32(value, 8) * 1000; >> + return 0; >> +} >> + >> +static int smpro_read_in(struct device *dev, u32 attr, int channel, >> long *val) >> +{ >> + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); >> + unsigned int value; >> + int ret; >> + >> + switch (attr) { >> + case hwmon_in_input: >> + ret = regmap_read(hwmon->regmap, voltage[channel].reg, &value); >> + if (ret < 0) >> + return ret; >> + /* 15-bit value in 1mV */ >> + *val = value & 0x7fff; >> + return 0; >> + default: >> + return -EOPNOTSUPP; >> + } >> +} >> + >> +static int smpro_read_curr(struct device *dev, u32 attr, int channel, >> long *val) >> +{ >> + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); >> + unsigned int value; >> + int ret; >> + >> + switch (attr) { >> + case hwmon_curr_input: >> + ret = regmap_read(hwmon->regmap, curr_sensor[channel].reg, >> &value); >> + if (ret < 0) >> + return ret; >> + /* Scale reported by the hardware is 1mA */ >> + *val = value & 0x7fff; >> + return 0; >> + default: >> + return -EOPNOTSUPP; >> + } >> +} >> + >> +static int smpro_read_power(struct device *dev, u32 attr, int >> channel, long *val_pwr) >> +{ >> + struct smpro_hwmon *hwmon = dev_get_drvdata(dev); >> + unsigned int val = 0, val_mw = 0; >> + int ret; >> + >> + switch (attr) { >> + case hwmon_power_input: >> + ret = regmap_read(hwmon->regmap, power[channel].reg, &val); >> + if (ret) >> + return ret; >> + >> + ret = regmap_read(hwmon->regmap, power[channel].reg_ext, >> &val_mw); >> + if (ret) >> + return ret; >> + >> + *val_pwr = val * 1000000 + val_mw * 1000; >> + return 0; >> + >> + default: >> + return -EOPNOTSUPP; >> + } >> +} >> + >> +static int smpro_read(struct device *dev, enum hwmon_sensor_types type, >> + u32 attr, int channel, long *val) >> +{ >> + switch (type) { >> + case hwmon_temp: >> + return smpro_read_temp(dev, attr, channel, val); >> + case hwmon_in: >> + return smpro_read_in(dev, attr, channel, val); >> + case hwmon_power: >> + return smpro_read_power(dev, attr, channel, val); >> + case hwmon_curr: >> + return smpro_read_curr(dev, attr, channel, val); >> + default: >> + return -EOPNOTSUPP; >> + } >> +} >> + >> +static int smpro_read_string(struct device *dev, enum >> hwmon_sensor_types type, >> + u32 attr, int channel, const char **str) >> +{ >> + switch (type) { >> + case hwmon_temp: >> + switch (attr) { >> + case hwmon_temp_label: >> + *str = temperature[channel].label; >> + return 0; >> + default: >> + break; >> + } >> + break; >> + >> + case hwmon_in: >> + switch (attr) { >> + case hwmon_in_label: >> + *str = voltage[channel].label; >> + return 0; >> + default: >> + break; >> + } >> + break; >> + >> + case hwmon_curr: >> + switch (attr) { >> + case hwmon_curr_label: >> + *str = curr_sensor[channel].label; >> + return 0; >> + default: >> + break; >> + } >> + break; >> + >> + case hwmon_power: >> + switch (attr) { >> + case hwmon_power_label: >> + *str = power[channel].label; >> + return 0; >> + default: >> + break; >> + } >> + break; >> + default: >> + break; >> + } >> + >> + return -EOPNOTSUPP; >> +} >> + >> +static umode_t smpro_is_visible(const void *data, enum >> hwmon_sensor_types type, >> + u32 attr, int channel) >> +{ >> + const struct smpro_hwmon *hwmon = data; >> + unsigned int value; >> + int ret; >> + >> + switch (type) { >> + case hwmon_temp: >> + switch (attr) { >> + case hwmon_temp_input: >> + case hwmon_temp_label: >> + case hwmon_temp_crit: >> + ret = regmap_read(hwmon->regmap, >> temperature[channel].reg, &value); >> + if (ret || value == 0xFFFF) >> + return 0; >> + break; >> + } >> + default: >> + break; >> + } >> + >> + return 0444; >> +} >> + >> +static const struct hwmon_channel_info *smpro_info[] = { >> + HWMON_CHANNEL_INFO(temp, >> + HWMON_T_INPUT | HWMON_T_LABEL, >> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, >> + HWMON_T_INPUT | HWMON_T_LABEL, >> + HWMON_T_INPUT | HWMON_T_LABEL, >> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, >> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, >> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, >> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, >> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, >> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, >> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, >> + HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT, >> + HWMON_T_INPUT | HWMON_T_LABEL), >> + HWMON_CHANNEL_INFO(in, >> + HWMON_I_INPUT | HWMON_I_LABEL, >> + HWMON_I_INPUT | HWMON_I_LABEL, >> + HWMON_I_INPUT | HWMON_I_LABEL, >> + HWMON_I_INPUT | HWMON_I_LABEL, >> + HWMON_I_INPUT | HWMON_I_LABEL), >> + HWMON_CHANNEL_INFO(power, >> + HWMON_P_INPUT | HWMON_P_LABEL, >> + HWMON_P_INPUT | HWMON_P_LABEL, >> + HWMON_P_INPUT | HWMON_P_LABEL, >> + HWMON_P_INPUT | HWMON_P_LABEL, >> + HWMON_P_INPUT | HWMON_P_LABEL), >> + HWMON_CHANNEL_INFO(curr, >> + HWMON_C_INPUT | HWMON_C_LABEL, >> + HWMON_C_INPUT | HWMON_C_LABEL, >> + HWMON_C_INPUT | HWMON_C_LABEL, >> + HWMON_C_INPUT | HWMON_C_LABEL, >> + HWMON_C_INPUT | HWMON_C_LABEL), >> + NULL >> +}; >> + >> +static const struct hwmon_ops smpro_hwmon_ops = { >> + .is_visible = smpro_is_visible, >> + .read = smpro_read, >> + .read_string = smpro_read_string, >> +}; >> + >> +static const struct hwmon_chip_info smpro_chip_info = { >> + .ops = &smpro_hwmon_ops, >> + .info = smpro_info, >> +}; >> + >> +static int smpro_hwmon_probe(struct platform_device *pdev) >> +{ >> + struct smpro_hwmon *hwmon; >> + struct device *hwmon_dev; >> + >> + hwmon = devm_kzalloc(&pdev->dev, sizeof(struct smpro_hwmon), >> GFP_KERNEL); >> + if (!hwmon) >> + return -ENOMEM; >> + >> + hwmon->regmap = dev_get_regmap(pdev->dev.parent, NULL); >> + if (!hwmon->regmap) >> + return -ENODEV; >> + >> + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, >> "smpro_hwmon", >> + hwmon, &smpro_chip_info, NULL); >> + >> + return PTR_ERR_OR_ZERO(hwmon_dev); >> +} >> + >> +static struct platform_driver smpro_hwmon_driver = { >> + .probe = smpro_hwmon_probe, >> + .driver = { >> + .name = "smpro-hwmon", >> + }, >> +}; >> + >> +module_platform_driver(smpro_hwmon_driver); >> + >> +MODULE_AUTHOR("Thu Nguyen <thu@os.amperecomputing.com>"); >> +MODULE_AUTHOR("Quan Nguyen <quan@os.amperecomputing.com>"); >> +MODULE_DESCRIPTION("Ampere Altra SMPro hwmon driver"); >> +MODULE_LICENSE("GPL v2"); >> > ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v5 4/4] docs: hwmon: (smpro-hwmon) Add documentation 2021-07-13 6:00 [PATCH v5 0/4] Add Ampere's Altra SMPro hwmon driver Quan Nguyen ` (2 preceding siblings ...) 2021-07-13 6:00 ` [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver Quan Nguyen @ 2021-07-13 6:00 ` Quan Nguyen 3 siblings, 0 replies; 11+ messages in thread From: Quan Nguyen @ 2021-07-13 6:00 UTC (permalink / raw) To: Joel Stanley, Andrew Jeffery, Jean Delvare, Guenter Roeck, Rob Herring, Lee Jones, Jonathan Corbet, linux-hwmon, devicetree, linux-kernel, linux-doc, linux-aspeed, openbmc Cc: Open Source Submission, Thang Q . Nguyen, Phong Vo Add documentation for the Ampere(R)'s Altra(R) SMpro hwmon driver. Signed-off-by: Thu Nguyen <thu@os.amperecomputing.com> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> --- Changes in v5: + None Changes in v4: + None Changes in v3: + None Changes in v2: + Removed "virtual" sensors [Guenter] + Fixed typo "mili" to "milli", "nanoWatt" to "microWatt" [Guenter] + Reported SOC_TDP as "Socket TDP" using max attributes [Guenter] + Clarified "highest" meaning in documentation [Guenter] + Reported MEM HOT Threshold for all DIMMs as temp*_crit [Guenter] + Removed Socket TDP sensor [Quan] + Included sensor type and channel in labels [Quan] Documentation/hwmon/index.rst | 1 + Documentation/hwmon/smpro-hwmon.rst | 101 ++++++++++++++++++++++++++++ 2 files changed, 102 insertions(+) create mode 100644 Documentation/hwmon/smpro-hwmon.rst diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index bc01601ea81a..b6579882f51b 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -172,6 +172,7 @@ Hardware Monitoring Kernel Drivers sis5595 sl28cpld smm665 + smpro-hwmon smsc47b397 smsc47m192 smsc47m1 diff --git a/Documentation/hwmon/smpro-hwmon.rst b/Documentation/hwmon/smpro-hwmon.rst new file mode 100644 index 000000000000..f978b1370e16 --- /dev/null +++ b/Documentation/hwmon/smpro-hwmon.rst @@ -0,0 +1,101 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver Ampere(R)'s Altra(R) SMpro hwmon +============================================== + +Supported chips: + + * Ampere(R) Altra(R) + + Prefix: 'smpro' + + Reference: Altra SoC BMC Interface Specification + +Author: Thu Nguyen <thu@os.amperecomputing.com> + +Description +----------- +This driver supports hardware monitoring for Ampere(R) Altra(R) SoC's based on the +SMpro co-processor (SMpro). +The following sensor types are supported by the driver: + + * temperature + * voltage + * current + * power + +The SMpro interface provides the registers to query the various sensors and +their values which are then exported to userspace by this driver. + +Usage Notes +----------- + +SMpro hwmon driver creates at least two sysfs files for each sensor. + +* File ``<sensor_type><idx>_label`` reports the sensor label. +* File ``<sensor_type><idx>_input`` returns the sensor value. + +The sysfs files are allocated in the SMpro root fs folder. +There is one root folder for each SMpro instance. + +When the SoC is turned off, the driver will fail to read registers +and return -ENXIO. + +Sysfs entries +------------- + +The following sysfs files are supported: + +* Ampere(R) Altra(R): + +============ ============= ====== =============================================== +Name Unit Perm Description +temp1_input milli Celsius RO SoC temperature +temp2_input milli Celsius RO Max temperature reported among SoC VRDs +temp2_crit milli Celsius RO SoC VRD HOT Threshold temperature +temp3_input milli Celsius RO Max temperature reported among DIMM VRDs +temp4_input milli Celsius RO Max temperature reported among Core VRDs +temp5_input milli Celsius RO Temperature of DIMM0 on CH0 +temp5_crit milli Celsius RO MEM HOT Threshold for all DIMMs +temp6_input milli Celsius RO Temperature of DIMM0 on CH1 +temp6_crit milli Celsius RO MEM HOT Threshold for all DIMMs +temp7_input milli Celsius RO Temperature of DIMM0 on CH2 +temp7_crit milli Celsius RO MEM HOT Threshold for all DIMMs +temp8_input milli Celsius RO Temperature of DIMM0 on CH3 +temp8_crit milli Celsius RO MEM HOT Threshold for all DIMMs +temp9_input milli Celsius RO Temperature of DIMM0 on CH4 +temp9_crit milli Celsius RO MEM HOT Threshold for all DIMMs +temp10_input milli Celsius RO Temperature of DIMM0 on CH5 +temp10_crit milli Celsius RO MEM HOT Threshold for all DIMMs +temp11_input milli Celsius RO Temperature of DIMM0 on CH6 +temp11_crit milli Celsius RO MEM HOT Threshold for all DIMMs +temp12_input milli Celsius RO Temperature of DIMM0 on CH7 +temp12_crit milli Celsius RO MEM HOT Threshold for all DIMMs +temp13_input milli Celsius RO Max temperature reported among RCA VRDs +in0_input milli Volts RO Core voltage +in1_input milli Volts RO SoC voltage +in2_input milli Volts RO DIMM VRD1 voltage +in3_input milli Volts RO DIMM VRD2 voltage +in4_input milli Volts RO RCA VRD voltage +cur1_input milli Amperes RO Core VRD current +cur2_input milli Amperes RO SoC VRD current +cur3_input milli Amperes RO DIMM VRD1 current +cur4_input milli Amperes RO DIMM VRD2 current +cur5_input milli Amperes RO RCA VRD current +power1_input micro Watts RO Core VRD power +power2_input micro Watts RO SoC VRD power +power3_input micro Watts RO DIMM VRD1 power +power4_input micro Watts RO DIMM VRD2 power +power5_input micro Watts RO RCA VRD power +============ ============= ====== =============================================== + +Example:: + + # cat in0_input + 830 + # cat temp1_input + 37000 + # cat curr1_input + 9000 + # cat power5_input + 19500000 -- 2.28.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
end of thread, other threads:[~2021-07-17 12:53 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-07-13 6:00 [PATCH v5 0/4] Add Ampere's Altra SMPro hwmon driver Quan Nguyen 2021-07-13 6:00 ` [PATCH v5 1/4] dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver Quan Nguyen 2021-07-16 17:34 ` Rob Herring 2021-07-17 12:51 ` Quan Nguyen 2021-07-13 6:00 ` [PATCH v5 2/4] mfd: smpro-mfd: Adds Ampere's Altra SMpro " Quan Nguyen 2021-07-13 9:11 ` Guenter Roeck 2021-07-13 9:26 ` Quan Nguyen 2021-07-13 6:00 ` [PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver Quan Nguyen 2021-07-13 15:28 ` Guenter Roeck 2021-07-13 23:45 ` Quan Nguyen 2021-07-13 6:00 ` [PATCH v5 4/4] docs: hwmon: (smpro-hwmon) Add documentation Quan Nguyen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).