* [PATCH v2 1/6] ARM: dts: Add Facebook BMC 128MB flash layout
2021-08-05 22:28 [PATCH v2 0/6] ARM: dts: Add Facebook AST2600 BMCs rentao.bupt
@ 2021-08-05 22:28 ` rentao.bupt
2021-08-05 22:28 ` [PATCH v2 2/6] ARM: dts: aspeed: wedge400: Use common " rentao.bupt
` (4 subsequent siblings)
5 siblings, 0 replies; 19+ messages in thread
From: rentao.bupt @ 2021-08-05 22:28 UTC (permalink / raw)
To: Rob Herring, Joel Stanley, Andrew Jeffery, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel, openbmc, taoren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
This is the layout used by Facebook BMC systems. It describes the fixed
flash layout of a 128MB mtd device.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v2:
- None.
.../dts/facebook-bmc-flash-layout-128.dtsi | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi b/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
new file mode 100644
index 000000000000..7f3652dea550
--- /dev/null
+++ b/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * u-boot partition: 896KB.
+ */
+ u-boot@0 {
+ reg = <0x0 0xe0000>;
+ label = "u-boot";
+ };
+
+ /*
+ * u-boot environment variables: 64KB.
+ */
+ u-boot-env@e0000 {
+ reg = <0xe0000 0x10000>;
+ label = "env";
+ };
+
+ /*
+ * image metadata partition (64KB), used by Facebook internal
+ * tools.
+ */
+ image-meta@f0000 {
+ reg = <0xf0000 0x10000>;
+ label = "meta";
+ };
+
+ /*
+ * FIT image: 119 MB.
+ */
+ fit@100000 {
+ reg = <0x100000 0x7700000>;
+ label = "fit";
+ };
+
+ /*
+ * "data0" partition (8MB) is used by Facebook BMC platforms as
+ * persistent data store.
+ */
+ data0@7800000 {
+ reg = <0x7800000 0x800000>;
+ label = "data0";
+ };
+
+ /*
+ * Although the master partition can be created by enabling
+ * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+ * explicitly created to avoid breaking legacy applications.
+ */
+ flash0@0 {
+ reg = <0x0 0x8000000>;
+ label = "flash0";
+ };
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v2 2/6] ARM: dts: aspeed: wedge400: Use common flash layout
2021-08-05 22:28 [PATCH v2 0/6] ARM: dts: Add Facebook AST2600 BMCs rentao.bupt
2021-08-05 22:28 ` [PATCH v2 1/6] ARM: dts: Add Facebook BMC 128MB flash layout rentao.bupt
@ 2021-08-05 22:28 ` rentao.bupt
2021-08-05 22:28 ` [PATCH v2 3/6] ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs rentao.bupt
` (3 subsequent siblings)
5 siblings, 0 replies; 19+ messages in thread
From: rentao.bupt @ 2021-08-05 22:28 UTC (permalink / raw)
To: Rob Herring, Joel Stanley, Andrew Jeffery, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel, openbmc, taoren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Simplify wedge400 flash layout by using the common layout defined in
"facebook-bmc-flash-layout-128.dtsi".
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v2:
- None.
.../boot/dts/aspeed-bmc-facebook-wedge400.dts | 48 +------------------
1 file changed, 1 insertion(+), 47 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
index 63a3dd548f30..a901c8be49b9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
@@ -91,53 +91,7 @@
* Both firmware flashes are 128MB on Wedge400 BMC.
*/
&fmc_flash0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * u-boot partition: 384KB.
- */
- u-boot@0 {
- reg = <0x0 0x60000>;
- label = "u-boot";
- };
-
- /*
- * u-boot environment variables: 128KB.
- */
- u-boot-env@60000 {
- reg = <0x60000 0x20000>;
- label = "env";
- };
-
- /*
- * FIT image: 123.5 MB.
- */
- fit@80000 {
- reg = <0x80000 0x7b80000>;
- label = "fit";
- };
-
- /*
- * "data0" partition (4MB) is reserved for persistent
- * data store.
- */
- data0@7c00000 {
- reg = <0x7c00000 0x400000>;
- label = "data0";
- };
-
- /*
- * "flash0" partition (covering the entire flash) is
- * explicitly created to avoid breaking legacy applications.
- */
- flash0@0 {
- reg = <0x0 0x8000000>;
- label = "flash0";
- };
- };
+#include "facebook-bmc-flash-layout-128.dtsi"
};
&fmc_flash1 {
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v2 3/6] ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs
2021-08-05 22:28 [PATCH v2 0/6] ARM: dts: Add Facebook AST2600 BMCs rentao.bupt
2021-08-05 22:28 ` [PATCH v2 1/6] ARM: dts: Add Facebook BMC 128MB flash layout rentao.bupt
2021-08-05 22:28 ` [PATCH v2 2/6] ARM: dts: aspeed: wedge400: Use common " rentao.bupt
@ 2021-08-05 22:28 ` rentao.bupt
2023-12-20 8:14 ` Lukas Wunner
2021-08-05 22:28 ` [PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC rentao.bupt
` (2 subsequent siblings)
5 siblings, 1 reply; 19+ messages in thread
From: rentao.bupt @ 2021-08-05 22:28 UTC (permalink / raw)
To: Rob Herring, Joel Stanley, Andrew Jeffery, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel, openbmc, taoren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
This common descirption is included by all Facebook AST2600 Network BMC
platforms to minimize duplicated device entries across Facebook Network
BMC device trees.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v2:
- "mac3" is removed from the dtsi (moved to platform dts files).
.../dts/ast2600-facebook-netbmc-common.dtsi | 169 ++++++++++++++++++
1 file changed, 169 insertions(+)
create mode 100644 arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
diff --git a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..051de5bec345
--- /dev/null
+++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ aliases {
+ mmc0 = &emmc;
+ spi1 = &spi1;
+ spi2 = &spi_gpio;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,9600n8 root=/dev/ram rw vmalloc=640M";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ /*
+ * GPIO-based SPI Master is required to access SPI TPM, because
+ * full-duplex SPI transactions are not supported by ASPEED SPI
+ * Controllers.
+ */
+ spi_gpio: spi-gpio {
+ status = "okay";
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+
+ tpmdev@0 {
+ compatible = "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "spi0.0";
+
+#include "facebook-bmc-flash-layout-128.dtsi"
+ };
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "spi0.1";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1@0 {
+ reg = <0x0 0x8000000>;
+ label = "flash1";
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+
+ non-removable;
+ max-frequency = <25000000>;
+ bus-width = <4>;
+};
+
+&rtc {
+ status = "okay";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH v2 3/6] ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs
2021-08-05 22:28 ` [PATCH v2 3/6] ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs rentao.bupt
@ 2023-12-20 8:14 ` Lukas Wunner
2024-01-03 0:11 ` Tao Ren
0 siblings, 1 reply; 19+ messages in thread
From: Lukas Wunner @ 2023-12-20 8:14 UTC (permalink / raw)
To: rentao.bupt
Cc: devicetree, linux-aspeed, Andrew Jeffery, taoren, openbmc,
linux-kernel, Rob Herring, Joel Stanley, linux-arm-kernel
On Thu, Aug 05, 2021 at 03:28:15PM -0700, rentao.bupt@gmail.com wrote:
> This common descirption is included by all Facebook AST2600 Network BMC
> platforms to minimize duplicated device entries across Facebook Network
> BMC device trees.
[...]
> --- /dev/null
> +++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
[...]
> + tpmdev@0 {
> + compatible = "tcg,tpm_tis-spi";
What's the chip used on this board? Going forward, the DT schema for TPMs
requires the exact chip name in addition to the generic "tcg,tpm_tis-spi".
> + spi-max-frequency = <33000000>;
> + reg = <0>;
> + };
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH v2 3/6] ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs
2023-12-20 8:14 ` Lukas Wunner
@ 2024-01-03 0:11 ` Tao Ren
2024-01-03 12:45 ` Lukas Wunner
0 siblings, 1 reply; 19+ messages in thread
From: Tao Ren @ 2024-01-03 0:11 UTC (permalink / raw)
To: Lukas Wunner
Cc: devicetree, linux-aspeed, Andrew Jeffery, taoren, openbmc,
linux-kernel, Rob Herring, Joel Stanley, linux-arm-kernel
Hi Lukas,
On Wed, Dec 20, 2023 at 09:14:02AM +0100, Lukas Wunner wrote:
> On Thu, Aug 05, 2021 at 03:28:15PM -0700, rentao.bupt@gmail.com wrote:
> > This common descirption is included by all Facebook AST2600 Network BMC
> > platforms to minimize duplicated device entries across Facebook Network
> > BMC device trees.
> [...]
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
> [...]
> > + tpmdev@0 {
> > + compatible = "tcg,tpm_tis-spi";
>
> What's the chip used on this board? Going forward, the DT schema for TPMs
> requires the exact chip name in addition to the generic "tcg,tpm_tis-spi".
Sorry about the late response. It's "infineon,slb9670", and I will
submit a patch for fix it soon.
Cheers,
- Tao
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH v2 3/6] ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs
2024-01-03 0:11 ` Tao Ren
@ 2024-01-03 12:45 ` Lukas Wunner
2024-01-03 15:48 ` Patrick Williams
2024-01-03 18:16 ` Tao Ren
0 siblings, 2 replies; 19+ messages in thread
From: Lukas Wunner @ 2024-01-03 12:45 UTC (permalink / raw)
To: Tao Ren
Cc: devicetree, linux-aspeed, Andrew Jeffery, taoren, openbmc,
linux-kernel, Rob Herring, Joel Stanley, linux-arm-kernel
On Tue, Jan 02, 2024 at 04:11:28PM -0800, Tao Ren wrote:
> On Wed, Dec 20, 2023 at 09:14:02AM +0100, Lukas Wunner wrote:
> > On Thu, Aug 05, 2021 at 03:28:15PM -0700, rentao.bupt@gmail.com wrote:
> > > This common descirption is included by all Facebook AST2600 Network BMC
> > > platforms to minimize duplicated device entries across Facebook Network
> > > BMC device trees.
> > [...]
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
> > [...]
> > > + tpmdev@0 {
> > > + compatible = "tcg,tpm_tis-spi";
> >
> > What's the chip used on this board? Going forward, the DT schema for TPMs
> > requires the exact chip name in addition to the generic "tcg,tpm_tis-spi".
>
> Sorry about the late response. It's "infineon,slb9670", and I will
> submit a patch for fix it soon.
Thank you Tao and Patrick for the replies. I've prepared two commits
to fix all violations of the TPM schema on this branch:
https://github.com/l1k/linux/commits/tpm-dt3
The commits are named:
e95bdbc arm64: dts: Fix TPM schema violations
63e5dfd ARM: dts: Fix TPM schema violations
I've now amended the ARM commit to use "infineon,slb9670" for:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
I intend to submit the two commits once the TPM schema is applied
either to Jarkko's or Rob's tree:
https://lore.kernel.org/all/20231220160422.GA282877-robh@kernel.org/
Thanks,
Lukas
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH v2 3/6] ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs
2024-01-03 12:45 ` Lukas Wunner
@ 2024-01-03 15:48 ` Patrick Williams
2024-01-03 18:16 ` Tao Ren
1 sibling, 0 replies; 19+ messages in thread
From: Patrick Williams @ 2024-01-03 15:48 UTC (permalink / raw)
To: Lukas Wunner
Cc: devicetree, linux-aspeed, Andrew Jeffery, taoren, openbmc,
linux-kernel, Rob Herring, Joel Stanley, Tao Ren,
linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 1889 bytes --]
On Wed, Jan 03, 2024 at 01:45:02PM +0100, Lukas Wunner wrote:
> On Tue, Jan 02, 2024 at 04:11:28PM -0800, Tao Ren wrote:
> > On Wed, Dec 20, 2023 at 09:14:02AM +0100, Lukas Wunner wrote:
> > > On Thu, Aug 05, 2021 at 03:28:15PM -0700, rentao.bupt@gmail.com wrote:
> > > > This common descirption is included by all Facebook AST2600 Network BMC
> > > > platforms to minimize duplicated device entries across Facebook Network
> > > > BMC device trees.
> > > [...]
> > > > --- /dev/null
> > > > +++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
> > > [...]
> > > > + tpmdev@0 {
> > > > + compatible = "tcg,tpm_tis-spi";
> > >
> > > What's the chip used on this board? Going forward, the DT schema for TPMs
> > > requires the exact chip name in addition to the generic "tcg,tpm_tis-spi".
> >
> > Sorry about the late response. It's "infineon,slb9670", and I will
> > submit a patch for fix it soon.
>
> Thank you Tao and Patrick for the replies. I've prepared two commits
> to fix all violations of the TPM schema on this branch:
>
> https://github.com/l1k/linux/commits/tpm-dt3
>
> The commits are named:
>
> e95bdbc arm64: dts: Fix TPM schema violations
> 63e5dfd ARM: dts: Fix TPM schema violations
Feel free to add to "63e5dfd (ARM: dts: Fix TPM schema violations)":
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
>
> I've now amended the ARM commit to use "infineon,slb9670" for:
>
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
> arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
>
> I intend to submit the two commits once the TPM schema is applied
> either to Jarkko's or Rob's tree:
>
> https://lore.kernel.org/all/20231220160422.GA282877-robh@kernel.org/
>
> Thanks,
>
> Lukas
--
Patrick Williams
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH v2 3/6] ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs
2024-01-03 12:45 ` Lukas Wunner
2024-01-03 15:48 ` Patrick Williams
@ 2024-01-03 18:16 ` Tao Ren
1 sibling, 0 replies; 19+ messages in thread
From: Tao Ren @ 2024-01-03 18:16 UTC (permalink / raw)
To: Lukas Wunner
Cc: devicetree, linux-aspeed, Andrew Jeffery, taoren, openbmc,
linux-kernel, Rob Herring, Joel Stanley, linux-arm-kernel
Hi Lukas,
On Wed, Jan 03, 2024 at 01:45:02PM +0100, Lukas Wunner wrote:
> On Tue, Jan 02, 2024 at 04:11:28PM -0800, Tao Ren wrote:
> > On Wed, Dec 20, 2023 at 09:14:02AM +0100, Lukas Wunner wrote:
> > > On Thu, Aug 05, 2021 at 03:28:15PM -0700, rentao.bupt@gmail.com wrote:
> > > > This common descirption is included by all Facebook AST2600 Network BMC
> > > > platforms to minimize duplicated device entries across Facebook Network
> > > > BMC device trees.
> > > [...]
> > > > --- /dev/null
> > > > +++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
> > > [...]
> > > > + tpmdev@0 {
> > > > + compatible = "tcg,tpm_tis-spi";
> > >
> > > What's the chip used on this board? Going forward, the DT schema for TPMs
> > > requires the exact chip name in addition to the generic "tcg,tpm_tis-spi".
> >
> > Sorry about the late response. It's "infineon,slb9670", and I will
> > submit a patch for fix it soon.
>
> Thank you Tao and Patrick for the replies. I've prepared two commits
> to fix all violations of the TPM schema on this branch:
>
> https://github.com/l1k/linux/commits/tpm-dt3
>
> The commits are named:
>
> e95bdbc arm64: dts: Fix TPM schema violations
> 63e5dfd ARM: dts: Fix TPM schema violations
>
> I've now amended the ARM commit to use "infineon,slb9670" for:
>
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
> arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
>
> I intend to submit the two commits once the TPM schema is applied
> either to Jarkko's or Rob's tree:
>
> https://lore.kernel.org/all/20231220160422.GA282877-robh@kernel.org/
>
> Thanks,
>
> Lukas
I've confirmed it's "infineon,slb9670" for both wedge400 and
ast2600-facebook-netbmc-common.
Pleasr free to add to "63e5dfd (ARM: dts: Fix TPM schema violations)":
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Cheers,
- Tao
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC
2021-08-05 22:28 [PATCH v2 0/6] ARM: dts: Add Facebook AST2600 BMCs rentao.bupt
` (2 preceding siblings ...)
2021-08-05 22:28 ` [PATCH v2 3/6] ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs rentao.bupt
@ 2021-08-05 22:28 ` rentao.bupt
2021-08-13 1:29 ` Joel Stanley
2021-08-05 22:28 ` [PATCH v2 5/6] ARM: dts: aspeed: Add Facebook Elbert " rentao.bupt
2021-08-05 22:28 ` [PATCH v2 6/6] ARM: dts: aspeed: Add Facebook Fuji " rentao.bupt
5 siblings, 1 reply; 19+ messages in thread
From: rentao.bupt @ 2021-08-05 22:28 UTC (permalink / raw)
To: Rob Herring, Joel Stanley, Andrew Jeffery, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel, openbmc, taoren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Add initial version of device tree for Facebook Cloudripper (AST2600) BMC.
Cloudripper is Facebook's next generation switch platform with an AST2600
BMC integrated for health monitoring purpose.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v2:
- added more notes about the new platform in patch description.
- "spi1" was removed as the driver is not ready.
- "mac3" properties were updated with pinctrl, and etc.
arch/arm/boot/dts/Makefile | 1 +
.../dts/aspeed-bmc-facebook-cloudripper.dts | 539 ++++++++++++++++++
2 files changed, 540 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 90aed2c2959a..74c760038f28 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1409,6 +1409,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
aspeed-bmc-bytedance-g220a.dtb \
+ aspeed-bmc-facebook-cloudripper.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-galaxy100.dtb \
aspeed-bmc-facebook-minipack.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
new file mode 100644
index 000000000000..01ec3ce0a29d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Cloudripper BMC";
+ compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
+
+ aliases {
+ /*
+ * PCA9548 (1-0070) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to
+ * SCM (System Controller Module).
+ */
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+
+ /*
+ * PCA9548 (3-0070) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c32 = &imux32;
+ i2c33 = &imux33;
+ i2c34 = &imux34;
+ i2c35 = &imux35;
+ i2c36 = &imux36;
+ i2c37 = &imux37;
+ i2c38 = &imux38;
+ i2c39 = &imux39;
+
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to
+ * PDB (Power Delivery Board).
+ */
+ i2c40 = &imux40;
+ i2c41 = &imux41;
+ i2c42 = &imux42;
+ i2c43 = &imux43;
+ i2c44 = &imux44;
+ i2c45 = &imux45;
+ i2c46 = &imux46;
+ i2c47 = &imux47;
+
+ /*
+ * PCA9548 (15-0076) provides 8 channels connecting to
+ * FCM (Fan Controller Module).
+ */
+ i2c48 = &imux48;
+ i2c49 = &imux49;
+ i2c50 = &imux50;
+ i2c51 = &imux51;
+ i2c52 = &imux52;
+ i2c53 = &imux53;
+ i2c54 = &imux54;
+ i2c55 = &imux55;
+ };
+
+ spi_gpio: spi-gpio {
+ num-chipselects = <2>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+ <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+
+ eeprom@1 {
+ compatible = "atmel,at93c46d";
+ spi-max-frequency = <250000>;
+ data-size = <16>;
+ spi-cs-high;
+ reg = <1>;
+ };
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mdio1 {
+ status = "okay";
+};
+
+&mdio3 {
+ status = "okay";
+
+ ethphy1: ethernet-phy@13 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0d>;
+ };
+};
+
+&mac3 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&i2c0 {
+ multi-master;
+ bus-frequency = <1000000>;
+};
+
+&i2c1 {
+ /*
+ * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c2 {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+ * Controller Module).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c3 {
+ /*
+ * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux32: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux33: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux34: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux35: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux36: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux37: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux38: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux39: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c6 {
+ lp5012@14 {
+ compatible = "ti,lp5012";
+ reg = <0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "sys";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "fan";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "psu";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "scm";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+ };
+};
+
+&i2c8 {
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
+ * Delivery Board).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux40: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux41: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux42: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux43: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux44: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux45: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux46: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux47: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c15 {
+ /*
+ * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
+ * Controller Module).
+ */
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux48: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux49: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux50: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux51: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux52: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux53: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux54: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux55: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC
2021-08-05 22:28 ` [PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC rentao.bupt
@ 2021-08-13 1:29 ` Joel Stanley
2021-08-13 3:40 ` Tao Ren
0 siblings, 1 reply; 19+ messages in thread
From: Joel Stanley @ 2021-08-13 1:29 UTC (permalink / raw)
To: Tao Ren
Cc: devicetree, linux-aspeed, Andrew Jeffery, Tao Ren,
OpenBMC Maillist, Linux Kernel Mailing List, Rob Herring,
Linux ARM
On Thu, 5 Aug 2021 at 22:28, <rentao.bupt@gmail.com> wrote:
> +&mdio1 {
> + status = "okay";
You're enabling this but it looks like it's unused?
> +};
> +
> +&mdio3 {
> + status = "okay";
> +
> + ethphy1: ethernet-phy@13 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x0d>;
> + };
> +};
> +
> +&mac3 {
> + status = "okay";
> + phy-mode = "rgmii";
> + phy-handle = <ðphy1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii4_default>;
> +};
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC
2021-08-13 1:29 ` Joel Stanley
@ 2021-08-13 3:40 ` Tao Ren
2021-08-13 4:13 ` Joel Stanley
2021-08-13 14:45 ` Andrew Lunn
0 siblings, 2 replies; 19+ messages in thread
From: Tao Ren @ 2021-08-13 3:40 UTC (permalink / raw)
To: Joel Stanley
Cc: devicetree, linux-aspeed, Andrew Jeffery, Tao Ren,
OpenBMC Maillist, Linux Kernel Mailing List, Rob Herring,
Linux ARM
On Fri, Aug 13, 2021 at 01:29:17AM +0000, Joel Stanley wrote:
> On Thu, 5 Aug 2021 at 22:28, <rentao.bupt@gmail.com> wrote:
> > +&mdio1 {
> > + status = "okay";
>
> You're enabling this but it looks like it's unused?
Thanks Joel for the careful review. The MDIO controller is not paired
with BMC MAC; instead, it's connected to the MDC/MDIO interface of the
on-board switch (whose ports are connected to BMC, Host and front panel
management port).
In other word, the MDIO controller is used, but we do need some user
space scripts to control the controller. What's your suggestion? For
example, should I add some comments to explain the purpose?
Cheers,
Tao
>
> > +};
> > +
> > +&mdio3 {
> > + status = "okay";
> > +
> > + ethphy1: ethernet-phy@13 {
> > + compatible = "ethernet-phy-ieee802.3-c22";
> > + reg = <0x0d>;
> > + };
> > +};
> > +
> > +&mac3 {
> > + status = "okay";
> > + phy-mode = "rgmii";
> > + phy-handle = <ðphy1>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_rgmii4_default>;
> > +};
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC
2021-08-13 3:40 ` Tao Ren
@ 2021-08-13 4:13 ` Joel Stanley
2021-08-13 14:45 ` Andrew Lunn
1 sibling, 0 replies; 19+ messages in thread
From: Joel Stanley @ 2021-08-13 4:13 UTC (permalink / raw)
To: Tao Ren
Cc: devicetree, linux-aspeed, Andrew Jeffery, Tao Ren,
OpenBMC Maillist, Linux Kernel Mailing List, Rob Herring,
Linux ARM
On Fri, 13 Aug 2021 at 03:40, Tao Ren <rentao.bupt@gmail.com> wrote:
>
> On Fri, Aug 13, 2021 at 01:29:17AM +0000, Joel Stanley wrote:
> > On Thu, 5 Aug 2021 at 22:28, <rentao.bupt@gmail.com> wrote:
> > > +&mdio1 {
> > > + status = "okay";
> >
> > You're enabling this but it looks like it's unused?
>
> Thanks Joel for the careful review. The MDIO controller is not paired
> with BMC MAC; instead, it's connected to the MDC/MDIO interface of the
> on-board switch (whose ports are connected to BMC, Host and front panel
> management port).
I see!
>
> In other word, the MDIO controller is used, but we do need some user
> space scripts to control the controller. What's your suggestion? For
> example, should I add some comments to explain the purpose?
Yes, that would make sense.
I've applied your patch, so if you want to add comments please send a
diff against this tree:
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc.git/log/?h=dt-for-v5.15
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC
2021-08-13 3:40 ` Tao Ren
2021-08-13 4:13 ` Joel Stanley
@ 2021-08-13 14:45 ` Andrew Lunn
2021-08-14 5:22 ` Tao Ren
1 sibling, 1 reply; 19+ messages in thread
From: Andrew Lunn @ 2021-08-13 14:45 UTC (permalink / raw)
To: Tao Ren
Cc: devicetree, linux-aspeed, Andrew Jeffery, Tao Ren,
OpenBMC Maillist, Linux Kernel Mailing List, Rob Herring,
Linux ARM
On Thu, Aug 12, 2021 at 08:40:17PM -0700, Tao Ren wrote:
> On Fri, Aug 13, 2021 at 01:29:17AM +0000, Joel Stanley wrote:
> > On Thu, 5 Aug 2021 at 22:28, <rentao.bupt@gmail.com> wrote:
> > > +&mdio1 {
> > > + status = "okay";
> >
> > You're enabling this but it looks like it's unused?
>
> Thanks Joel for the careful review. The MDIO controller is not paired
> with BMC MAC; instead, it's connected to the MDC/MDIO interface of the
> on-board switch (whose ports are connected to BMC, Host and front panel
> management port).
What switch is it? Is there a DSA driver for it? drivers/net/dsa/*
Ideally you want Linux to be controlling the switch, in the standard
linux way.
Andrew
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC
2021-08-13 14:45 ` Andrew Lunn
@ 2021-08-14 5:22 ` Tao Ren
2021-08-14 15:26 ` Andrew Lunn
0 siblings, 1 reply; 19+ messages in thread
From: Tao Ren @ 2021-08-14 5:22 UTC (permalink / raw)
To: Andrew Lunn
Cc: devicetree, linux-aspeed, Andrew Jeffery, Tao Ren,
OpenBMC Maillist, Linux Kernel Mailing List, Rob Herring,
Linux ARM
Hi Andrew,
On Fri, Aug 13, 2021 at 04:45:58PM +0200, Andrew Lunn wrote:
> On Thu, Aug 12, 2021 at 08:40:17PM -0700, Tao Ren wrote:
> > On Fri, Aug 13, 2021 at 01:29:17AM +0000, Joel Stanley wrote:
> > > On Thu, 5 Aug 2021 at 22:28, <rentao.bupt@gmail.com> wrote:
> > > > +&mdio1 {
> > > > + status = "okay";
> > >
> > > You're enabling this but it looks like it's unused?
> >
> > Thanks Joel for the careful review. The MDIO controller is not paired
> > with BMC MAC; instead, it's connected to the MDC/MDIO interface of the
> > on-board switch (whose ports are connected to BMC, Host and front panel
> > management port).
>
> What switch is it? Is there a DSA driver for it? drivers/net/dsa/*
> Ideally you want Linux to be controlling the switch, in the standard
> linux way.
>
> Andrew
Thanks for jumping in. We are using BCM5389 and the MDIO bus is used to
access BCM5389 MDC/MDIO interface in Pseudo-PHY mode.
I didn't know drivers/net/dsa, but let me check out the drivers and see
if it works in the Cloudripper environment.
Thanks,
Tao
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC
2021-08-14 5:22 ` Tao Ren
@ 2021-08-14 15:26 ` Andrew Lunn
2021-08-17 0:01 ` Tao Ren
0 siblings, 1 reply; 19+ messages in thread
From: Andrew Lunn @ 2021-08-14 15:26 UTC (permalink / raw)
To: Tao Ren
Cc: devicetree, linux-aspeed, Andrew Jeffery, Tao Ren,
OpenBMC Maillist, Linux Kernel Mailing List, Rob Herring,
Linux ARM
> Thanks for jumping in. We are using BCM5389 and the MDIO bus is used to
> access BCM5389 MDC/MDIO interface in Pseudo-PHY mode.
>
> I didn't know drivers/net/dsa, but let me check out the drivers and see
> if it works in the Cloudripper environment.
The b53 driver knows about this switch, so please make use of that
driver. See Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
for how you describe it in DT.
Andrew
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC
2021-08-14 15:26 ` Andrew Lunn
@ 2021-08-17 0:01 ` Tao Ren
0 siblings, 0 replies; 19+ messages in thread
From: Tao Ren @ 2021-08-17 0:01 UTC (permalink / raw)
To: Andrew Lunn
Cc: devicetree, linux-aspeed, Andrew Jeffery, Tao Ren,
OpenBMC Maillist, Linux Kernel Mailing List, Rob Herring,
Linux ARM
On Sat, Aug 14, 2021 at 05:26:55PM +0200, Andrew Lunn wrote:
> > Thanks for jumping in. We are using BCM5389 and the MDIO bus is used to
> > access BCM5389 MDC/MDIO interface in Pseudo-PHY mode.
> >
> > I didn't know drivers/net/dsa, but let me check out the drivers and see
> > if it works in the Cloudripper environment.
>
> The b53 driver knows about this switch, so please make use of that
> driver. See Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
> for how you describe it in DT.
>
> Andrew
Thank you Andrew for looking into it. I will update dts and send out
followup patch after validation (perhaps after v5.15 merge window).
Thanks,
Tao
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v2 5/6] ARM: dts: aspeed: Add Facebook Elbert (AST2600) BMC
2021-08-05 22:28 [PATCH v2 0/6] ARM: dts: Add Facebook AST2600 BMCs rentao.bupt
` (3 preceding siblings ...)
2021-08-05 22:28 ` [PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC rentao.bupt
@ 2021-08-05 22:28 ` rentao.bupt
2021-08-05 22:28 ` [PATCH v2 6/6] ARM: dts: aspeed: Add Facebook Fuji " rentao.bupt
5 siblings, 0 replies; 19+ messages in thread
From: rentao.bupt @ 2021-08-05 22:28 UTC (permalink / raw)
To: Rob Herring, Joel Stanley, Andrew Jeffery, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel, openbmc, taoren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Add initial version of device tree for Facebook Elbert (AST2600) BMC.
Elbert is Facebook's next generation switch platform with an AST2600 BMC
integrated for health monitoring purpose.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v2:
- added more notes about the new platform in patch description.
- "mac3" was disabled (because it was removed from Facebook AST2600
NetBMC common dtsi). Will add "mac3" back when "fixed-link" is
supported in the MAC driver.
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/aspeed-bmc-facebook-elbert.dts | 185 ++++++++++++++++++
2 files changed, 186 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 74c760038f28..7cbb982a7c8b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1411,6 +1411,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-facebook-cloudripper.dtb \
aspeed-bmc-facebook-cmm.dtb \
+ aspeed-bmc-facebook-elbert.dtb \
aspeed-bmc-facebook-galaxy100.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
new file mode 100644
index 000000000000..27b43fe099f1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Elbert BMC";
+ compatible = "facebook,elbert-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart5;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+
+ /*
+ * 8 child channels of PCA9548 2-0075.
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+
+ /*
+ * 8 child channels of PCA9548 5-0075.
+ */
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ spi_gpio: spi-gpio {
+ num-chipselects = <1>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c2 {
+ i2c-switch@75 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c5 {
+ i2c-switch@75 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c11 {
+ status = "okay";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v2 6/6] ARM: dts: aspeed: Add Facebook Fuji (AST2600) BMC
2021-08-05 22:28 [PATCH v2 0/6] ARM: dts: Add Facebook AST2600 BMCs rentao.bupt
` (4 preceding siblings ...)
2021-08-05 22:28 ` [PATCH v2 5/6] ARM: dts: aspeed: Add Facebook Elbert " rentao.bupt
@ 2021-08-05 22:28 ` rentao.bupt
5 siblings, 0 replies; 19+ messages in thread
From: rentao.bupt @ 2021-08-05 22:28 UTC (permalink / raw)
To: Rob Herring, Joel Stanley, Andrew Jeffery, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel, openbmc, taoren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Add initial version of device tree for Facebook Fuji (AST2600) BMC.
Fuji is Facebook's next generation switch platform with an AST2600 BMC
integrated for health monitoring purpose.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v2:
- added more notes about the new platform in patch description.
- "spi1" was removed as the driver is not ready.
- "mac3" properties were updated with pinctrl, and etc.
arch/arm/boot/dts/Makefile | 1 +
.../arm/boot/dts/aspeed-bmc-facebook-fuji.dts | 1251 +++++++++++++++++
2 files changed, 1252 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7cbb982a7c8b..9765e2ff5bfe 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1412,6 +1412,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-cloudripper.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-elbert.dtb \
+ aspeed-bmc-facebook-fuji.dtb \
aspeed-bmc-facebook-galaxy100.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
new file mode 100644
index 000000000000..af58a73bbc49
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
@@ -0,0 +1,1251 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Fuji BMC";
+ compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+
+ aliases {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to
+ * SCM (System Controller Module).
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+
+ /*
+ * PCA9548 (11-0077) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c40 = &imux40;
+ i2c41 = &imux41;
+ i2c42 = &imux42;
+ i2c43 = &imux43;
+ i2c44 = &imux44;
+ i2c45 = &imux45;
+ i2c46 = &imux46;
+ i2c47 = &imux47;
+
+ /*
+ * PCA9548 (24-0071) provides 8 channels connecting to
+ * PDB-Left.
+ */
+ i2c48 = &imux48;
+ i2c49 = &imux49;
+ i2c50 = &imux50;
+ i2c51 = &imux51;
+ i2c52 = &imux52;
+ i2c53 = &imux53;
+ i2c54 = &imux54;
+ i2c55 = &imux55;
+
+ /*
+ * PCA9548 (25-0072) provides 8 channels connecting to
+ * PDB-Right.
+ */
+ i2c56 = &imux56;
+ i2c57 = &imux57;
+ i2c58 = &imux58;
+ i2c59 = &imux59;
+ i2c60 = &imux60;
+ i2c61 = &imux61;
+ i2c62 = &imux62;
+ i2c63 = &imux63;
+
+ /*
+ * PCA9548 (26-0076) provides 8 channels connecting to
+ * FCM1.
+ */
+ i2c64 = &imux64;
+ i2c65 = &imux65;
+ i2c66 = &imux66;
+ i2c67 = &imux67;
+ i2c68 = &imux68;
+ i2c69 = &imux69;
+ i2c70 = &imux70;
+ i2c71 = &imux71;
+
+ /*
+ * PCA9548 (27-0076) provides 8 channels connecting to
+ * FCM2.
+ */
+ i2c72 = &imux72;
+ i2c73 = &imux73;
+ i2c74 = &imux74;
+ i2c75 = &imux75;
+ i2c76 = &imux76;
+ i2c77 = &imux77;
+ i2c78 = &imux78;
+ i2c79 = &imux79;
+
+ /*
+ * PCA9548 (40-0076) provides 8 channels connecting to
+ * PIM1.
+ */
+ i2c80 = &imux80;
+ i2c81 = &imux81;
+ i2c82 = &imux82;
+ i2c83 = &imux83;
+ i2c84 = &imux84;
+ i2c85 = &imux85;
+ i2c86 = &imux86;
+ i2c87 = &imux87;
+
+ /*
+ * PCA9548 (41-0076) provides 8 channels connecting to
+ * PIM2.
+ */
+ i2c88 = &imux88;
+ i2c89 = &imux89;
+ i2c90 = &imux90;
+ i2c91 = &imux91;
+ i2c92 = &imux92;
+ i2c93 = &imux93;
+ i2c94 = &imux94;
+ i2c95 = &imux95;
+
+ /*
+ * PCA9548 (42-0076) provides 8 channels connecting to
+ * PIM3.
+ */
+ i2c96 = &imux96;
+ i2c97 = &imux97;
+ i2c98 = &imux98;
+ i2c99 = &imux99;
+ i2c100 = &imux100;
+ i2c101 = &imux101;
+ i2c102 = &imux102;
+ i2c103 = &imux103;
+
+ /*
+ * PCA9548 (43-0076) provides 8 channels connecting to
+ * PIM4.
+ */
+ i2c104 = &imux104;
+ i2c105 = &imux105;
+ i2c106 = &imux106;
+ i2c107 = &imux107;
+ i2c108 = &imux108;
+ i2c109 = &imux109;
+ i2c110 = &imux110;
+ i2c111 = &imux111;
+
+ /*
+ * PCA9548 (44-0076) provides 8 channels connecting to
+ * PIM5.
+ */
+ i2c112 = &imux112;
+ i2c113 = &imux113;
+ i2c114 = &imux114;
+ i2c115 = &imux115;
+ i2c116 = &imux116;
+ i2c117 = &imux117;
+ i2c118 = &imux118;
+ i2c119 = &imux119;
+
+ /*
+ * PCA9548 (45-0076) provides 8 channels connecting to
+ * PIM6.
+ */
+ i2c120 = &imux120;
+ i2c121 = &imux121;
+ i2c122 = &imux122;
+ i2c123 = &imux123;
+ i2c124 = &imux124;
+ i2c125 = &imux125;
+ i2c126 = &imux126;
+ i2c127 = &imux127;
+
+ /*
+ * PCA9548 (46-0076) provides 8 channels connecting to
+ * PIM7.
+ */
+ i2c128 = &imux128;
+ i2c129 = &imux129;
+ i2c130 = &imux130;
+ i2c131 = &imux131;
+ i2c132 = &imux132;
+ i2c133 = &imux133;
+ i2c134 = &imux134;
+ i2c135 = &imux135;
+
+ /*
+ * PCA9548 (47-0076) provides 8 channels connecting to
+ * PIM8.
+ */
+ i2c136 = &imux136;
+ i2c137 = &imux137;
+ i2c138 = &imux138;
+ i2c139 = &imux139;
+ i2c140 = &imux140;
+ i2c141 = &imux141;
+ i2c142 = &imux142;
+ i2c143 = &imux143;
+ };
+
+ spi_gpio: spi-gpio {
+ num-chipselects = <3>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+ <0>, /* device reg=<1> does not exist */
+ <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+ eeprom@2 {
+ compatible = "atmel,at93c46d";
+ spi-max-frequency = <250000>;
+ data-size = <16>;
+ spi-cs-high;
+ reg = <2>;
+ };
+ };
+};
+
+&i2c0 {
+ multi-master;
+ bus-frequency = <1000000>;
+};
+
+&i2c2 {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+ * Controller Module).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ shunt-resistor-micro-ohms = <1500>;
+ };
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c8 {
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ imux48: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux49: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux50: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ lp5012@14 {
+ compatible = "ti,lp5012";
+ reg = <0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "sys";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "fan";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "psu";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "smb";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+ };
+ };
+
+ imux51: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux52: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux53: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux54: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux55: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ i2c-switch@72 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ i2c-mux-idle-disconnect;
+
+ imux56: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux57: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux58: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux59: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux60: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux61: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux62: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux63: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux64: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux65: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux66: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux67: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ shunt-resistor-micro-ohms = <250>;
+ };
+ };
+
+ imux68: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux69: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux70: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux71: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux72: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux73: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux74: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux75: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ shunt-resistor-micro-ohms = <250>;
+ };
+ };
+
+ imux76: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux77: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux78: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux79: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ /*
+ * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+
+ imux40: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux80: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux81: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux82: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux83: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux84: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux85: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux86: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux87: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux41: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux88: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux89: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux90: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux91: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux92: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux93: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux94: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux95: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux42: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux96: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux97: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux98: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux99: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux100: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux101: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux102: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux103: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux43: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux104: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux105: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux106: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux107: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux108: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux109: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux110: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux111: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux44: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux112: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux113: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux114: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux115: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux116: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux117: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux118: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux119: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux45: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux120: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux121: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux122: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux123: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux124: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux125: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux126: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux127: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux46: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux128: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux129: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux130: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux131: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux132: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux133: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux134: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux135: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux47: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ i2c-switch@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux136: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux137: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux138: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux139: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux140: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux141: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux142: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux143: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mdio1 {
+ status = "okay";
+
+ ethphy3: ethernet-phy@13 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0d>;
+ };
+};
+
+&mac3 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <ðphy3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 19+ messages in thread