From: Eddie James <eajames@linux.ibm.com>
To: openbmc@lists.ozlabs.org
Cc: Andrew Jeffery <andrew@aj.id.au>
Subject: [PATCH linux dev-5.10 01/14] i2c: Allow throttling of transfers to client devices
Date: Wed, 11 Aug 2021 10:42:19 -0500 [thread overview]
Message-ID: <20210811154232.12649-2-eajames@linux.ibm.com> (raw)
In-Reply-To: <20210811154232.12649-1-eajames@linux.ibm.com>
From: Andrew Jeffery <andrew@aj.id.au>
Some devices fail to cope in disastrous ways with the small command
turn-around times enabled by in-kernel device drivers.
Introduce per-client throttling of transfers to avoid these issues.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
drivers/i2c/i2c-core-base.c | 8 +-
drivers/i2c/i2c-core-smbus.c | 169 +++++++++++++++++++++++++++++------
drivers/i2c/i2c-core.h | 21 +++++
include/linux/i2c.h | 5 ++
4 files changed, 172 insertions(+), 31 deletions(-)
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index bdce6d3e5327..bf35710d0407 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -871,13 +871,17 @@ int i2c_dev_irq_from_resources(const struct resource *resources,
struct i2c_client *
i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
{
+ struct i2c_client_priv *priv;
struct i2c_client *client;
int status;
- client = kzalloc(sizeof *client, GFP_KERNEL);
- if (!client)
+ priv = kzalloc(sizeof *priv, GFP_KERNEL);
+ if (!priv)
return ERR_PTR(-ENOMEM);
+ mutex_init(&priv->throttle_lock);
+ client = &priv->client;
+
client->adapter = adap;
client->dev.platform_data = info->platform_data;
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
index f5c9787992e9..1dde58c8a387 100644
--- a/drivers/i2c/i2c-core-smbus.c
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -10,6 +10,7 @@
* SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
* Jean Delvare <jdelvare@suse.de>
*/
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/i2c.h>
@@ -21,6 +22,9 @@
#define CREATE_TRACE_POINTS
#include <trace/events/smbus.h>
+static s32 i2c_smbus_throttle_xfer(const struct i2c_client *client,
+ char read_write, u8 command, int protocol,
+ union i2c_smbus_data *data);
/* The SMBus parts */
@@ -95,9 +99,9 @@ s32 i2c_smbus_read_byte(const struct i2c_client *client)
union i2c_smbus_data data;
int status;
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE, &data);
+ status = i2c_smbus_throttle_xfer(client, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE, &data);
+
return (status < 0) ? status : data.byte;
}
EXPORT_SYMBOL(i2c_smbus_read_byte);
@@ -112,8 +116,8 @@ EXPORT_SYMBOL(i2c_smbus_read_byte);
*/
s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value)
{
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
+ return i2c_smbus_throttle_xfer(client, I2C_SMBUS_WRITE, value,
+ I2C_SMBUS_BYTE, NULL);
}
EXPORT_SYMBOL(i2c_smbus_write_byte);
@@ -130,9 +134,9 @@ s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command)
union i2c_smbus_data data;
int status;
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_BYTE_DATA, &data);
+ status = i2c_smbus_throttle_xfer(client, I2C_SMBUS_READ, command,
+ I2C_SMBUS_BYTE_DATA, &data);
+
return (status < 0) ? status : data.byte;
}
EXPORT_SYMBOL(i2c_smbus_read_byte_data);
@@ -150,10 +154,10 @@ s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command,
u8 value)
{
union i2c_smbus_data data;
+
data.byte = value;
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_BYTE_DATA, &data);
+ return i2c_smbus_throttle_xfer(client, I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_BYTE_DATA, &data);
}
EXPORT_SYMBOL(i2c_smbus_write_byte_data);
@@ -170,9 +174,9 @@ s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command)
union i2c_smbus_data data;
int status;
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_WORD_DATA, &data);
+ status = i2c_smbus_throttle_xfer(client, I2C_SMBUS_READ, command,
+ I2C_SMBUS_WORD_DATA, &data);
+
return (status < 0) ? status : data.word;
}
EXPORT_SYMBOL(i2c_smbus_read_word_data);
@@ -190,10 +194,10 @@ s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command,
u16 value)
{
union i2c_smbus_data data;
+
data.word = value;
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_WORD_DATA, &data);
+ return i2c_smbus_throttle_xfer(client, I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_WORD_DATA, &data);
}
EXPORT_SYMBOL(i2c_smbus_write_word_data);
@@ -218,9 +222,9 @@ s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command,
union i2c_smbus_data data;
int status;
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_BLOCK_DATA, &data);
+ status = i2c_smbus_throttle_xfer(client, I2C_SMBUS_READ, command,
+ I2C_SMBUS_BLOCK_DATA, &data);
+
if (status)
return status;
@@ -248,9 +252,8 @@ s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command,
length = I2C_SMBUS_BLOCK_MAX;
data.block[0] = length;
memcpy(&data.block[1], values, length);
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_BLOCK_DATA, &data);
+ return i2c_smbus_throttle_xfer(client, I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_BLOCK_DATA, &data);
}
EXPORT_SYMBOL(i2c_smbus_write_block_data);
@@ -264,9 +267,9 @@ s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command,
if (length > I2C_SMBUS_BLOCK_MAX)
length = I2C_SMBUS_BLOCK_MAX;
data.block[0] = length;
- status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command,
- I2C_SMBUS_I2C_BLOCK_DATA, &data);
+ status = i2c_smbus_throttle_xfer(client, I2C_SMBUS_READ, command,
+ I2C_SMBUS_I2C_BLOCK_DATA, &data);
+
if (status < 0)
return status;
@@ -284,9 +287,8 @@ s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command,
length = I2C_SMBUS_BLOCK_MAX;
data.block[0] = length;
memcpy(data.block + 1, values, length);
- return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_WRITE, command,
- I2C_SMBUS_I2C_BLOCK_DATA, &data);
+ return i2c_smbus_throttle_xfer(client, I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_I2C_BLOCK_DATA, &data);
}
EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
@@ -547,6 +549,71 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
}
EXPORT_SYMBOL(i2c_smbus_xfer);
+static int i2c_smbus_throttle_enter(const struct i2c_client *client)
+ __acquires(&priv->throttle_lock)
+{
+ struct i2c_client_priv *priv;
+ ktime_t earliest;
+ int rc;
+
+ priv = to_i2c_client_priv(client);
+
+ if (i2c_in_atomic_xfer_mode()) {
+ if (!mutex_trylock(&priv->throttle_lock))
+ return -EAGAIN;
+ } else {
+ rc = mutex_lock_interruptible(&priv->throttle_lock);
+ if (rc)
+ return rc;
+ }
+ earliest = ktime_add_us(priv->last, priv->delay_us);
+
+ if (priv->delay_us && ktime_before(ktime_get(), earliest)) {
+ if (i2c_in_atomic_xfer_mode()) {
+ mutex_unlock(&priv->throttle_lock);
+ return -EAGAIN;
+ }
+
+ usleep_range(priv->delay_us, 2 * priv->delay_us);
+ }
+
+ return 0;
+}
+
+static void i2c_smbus_throttle_exit(const struct i2c_client *client)
+ __releases(&priv->throttle_lock)
+{
+ struct i2c_client_priv *priv;
+
+ priv = to_i2c_client_priv(client);
+
+ if (priv->delay_us)
+ priv->last = ktime_get();
+ mutex_unlock(&priv->throttle_lock);
+}
+
+static s32 i2c_smbus_throttle_xfer(const struct i2c_client *client,
+ char read_write, u8 command, int protocol,
+ union i2c_smbus_data *data)
+{
+ s32 res;
+
+ res = i2c_smbus_throttle_enter(client);
+ if (res)
+ return res;
+
+ res = __i2c_lock_bus_helper(client->adapter);
+ if (!res)
+ res = __i2c_smbus_xfer(client->adapter, client->addr,
+ client->flags, read_write, command,
+ protocol, data);
+ i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
+
+ i2c_smbus_throttle_exit(client);
+
+ return res;
+}
+
s32 __i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
unsigned short flags, char read_write,
u8 command, int protocol, union i2c_smbus_data *data)
@@ -715,3 +782,47 @@ int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
}
EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert);
#endif
+
+int i2c_smbus_throttle_client(struct i2c_client *client,
+ unsigned long delay_us)
+{
+ struct i2c_client_priv *priv;
+ int rc;
+
+ priv = to_i2c_client_priv(client);
+
+ if (i2c_in_atomic_xfer_mode()) {
+ if (!mutex_trylock(&priv->throttle_lock))
+ return -EAGAIN;
+ } else {
+ rc = mutex_lock_interruptible(&priv->throttle_lock);
+ if (rc)
+ return rc;
+ }
+ priv->delay_us = delay_us;
+ priv->last = ktime_get();
+ mutex_unlock(&priv->throttle_lock);
+
+ return 0;
+}
+
+int i2c_smbus_throttle_value(struct i2c_client *client, unsigned long *delay_us)
+{
+ struct i2c_client_priv *priv;
+ int rc;
+
+ priv = to_i2c_client_priv(client);
+
+ if (i2c_in_atomic_xfer_mode()) {
+ if (!mutex_trylock(&priv->throttle_lock))
+ return -EAGAIN;
+ } else {
+ rc = mutex_lock_interruptible(&priv->throttle_lock);
+ if (rc)
+ return rc;
+ }
+ *delay_us = priv->delay_us;
+ mutex_unlock(&priv->throttle_lock);
+
+ return 0;
+}
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
index 8ce261167a2d..e916624c7b98 100644
--- a/drivers/i2c/i2c-core.h
+++ b/drivers/i2c/i2c-core.h
@@ -4,6 +4,27 @@
*/
#include <linux/rwsem.h>
+#include <linux/i2c.h>
+#include <linux/timekeeping.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+
+struct i2c_client_priv {
+ struct i2c_client client;
+
+ /*
+ * Per-client access throttling, described in terms of microsecond
+ * delay between the end of the nth transfer and the start of the
+ * (n+1)th transfer
+ *
+ * Do it in a wrapper struct to preserve const-ness of the i2c_smbus_*
+ * interfaces.
+ */
+ struct mutex throttle_lock;
+ unsigned long delay_us;
+ ktime_t last;
+};
+#define to_i2c_client_priv(c) container_of(c, struct i2c_client_priv, client)
struct i2c_devinfo {
struct list_head list;
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index a670ae129f4b..89dbe147040f 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -181,8 +181,13 @@ s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client,
s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
u8 command, u8 length,
u8 *values);
+int i2c_smbus_throttle_client(struct i2c_client *client,
+ unsigned long delay_us);
+int i2c_smbus_throttle_value(struct i2c_client *client,
+ unsigned long *delay_us);
int i2c_get_device_id(const struct i2c_client *client,
struct i2c_device_identity *id);
+
#endif /* I2C */
/**
--
2.27.0
next prev parent reply other threads:[~2021-08-11 15:46 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-11 15:42 [PATCH linux dev-5.10 00/14] Rainier and Everest system fixes Eddie James
2021-08-11 15:42 ` Eddie James [this message]
2021-08-11 15:42 ` [PATCH linux dev-5.10 02/14] pmbus: (ucd9000) Throttle SMBus transfers to avoid poor behaviour Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 03/14] ucd9000: Add a throttle delay attribute in debugfs Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 04/14] fsi: run clock at 100MHz Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 05/14] pmbus: (core) Add a one-shot retry in pmbus_set_page() Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 06/14] pmbus: (max31785) Add a local pmbus_set_page() implementation Eddie James
2021-08-11 16:13 ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 07/14] pmbus: (max31785) Retry enabling fans after writing MFR_FAN_CONFIG Eddie James
2021-08-11 16:14 ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 08/14] ARM: dts: aspeed: Rainier: Add fan controller properties Eddie James
2021-08-11 16:14 ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 09/14] ARM: dts: aspeed: Everest: " Eddie James
2021-08-11 16:15 ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 10/14] ARM: dts: aspeed: Rainier 4U: Delete fan dual-tach properties Eddie James
2021-08-11 16:17 ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 11/14] ARM: dts: aspeed: Add Rainier 2U and 4U device trees for pass 1 hardware Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 12/14] fsi: sbefifo: Increase command timeouts to 30 seconds Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 13/14] fsi: occ: Add dynamic debug to dump command and response Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 14/14] fsi: sbefifo: Use interruptible mutex locking Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210811154232.12649-2-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=andrew@aj.id.au \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).