From: Jammy Huang <jammy_huang@aspeedtech.com>
To: <eajames@linux.ibm.com>, <mchehab@kernel.org>, <joel@jms.id.au>,
<andrew@aj.id.au>, <linux-media@vger.kernel.org>,
<openbmc@lists.ozlabs.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 3/6] media: aspeed: refine to centerize format/compress settings
Date: Thu, 14 Oct 2021 11:48:16 +0800 [thread overview]
Message-ID: <20211014034819.2283-4-jammy_huang@aspeedtech.com> (raw)
In-Reply-To: <20211014034819.2283-1-jammy_huang@aspeedtech.com>
Add API, aspeed_video_update_regs(), to centerize format/compress settings
which are controlled by user.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
drivers/media/platform/aspeed-video.c | 68 +++++++++++++--------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 7b8129b0ca5f..3b5a3935325d 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -974,20 +974,41 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
aspeed_video_free_buf(video, &video->srcs[0]);
}
-static void aspeed_video_init_regs(struct aspeed_video *video)
+static void aspeed_video_update_regs(struct aspeed_video *video)
{
u32 comp_ctrl = VE_COMP_CTRL_RSVD |
FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
- u32 ctrl = VE_CTRL_AUTO_OR_CURSOR;
+ u32 ctrl = 0;
u32 seq_ctrl = VE_SEQ_CTRL_JPEG_MODE;
+ dprintk(LOG_INFO, "framerate(%d)\n", video->frame_rate);
+ dprintk(LOG_INFO, "subsample(%s)\n",
+ video->yuv420 ? "420" : "444");
+ dprintk(LOG_INFO, "compression quality(%d)\n",
+ video->jpeg_quality);
+
if (video->frame_rate)
ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
if (video->yuv420)
seq_ctrl |= VE_SEQ_CTRL_YUV420;
+ if (video->jpeg.virt)
+ aspeed_video_update_jpeg_table(video->jpeg.virt, video->yuv420);
+
+ /* Set control registers */
+ aspeed_video_update(video, VE_SEQ_CTRL,
+ VE_SEQ_CTRL_JPEG_MODE | VE_SEQ_CTRL_YUV420,
+ seq_ctrl);
+ aspeed_video_update(video, VE_CTRL, VE_CTRL_FRC, ctrl);
+ aspeed_video_update(video, VE_COMP_CTRL,
+ VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR,
+ comp_ctrl);
+}
+
+static void aspeed_video_init_regs(struct aspeed_video *video)
+{
/* Unlock VE registers */
aspeed_video_write(video, VE_PROTECTION_KEY, VE_PROTECTION_KEY_UNLOCK);
@@ -1002,9 +1023,8 @@ static void aspeed_video_init_regs(struct aspeed_video *video)
aspeed_video_write(video, VE_JPEG_ADDR, video->jpeg.dma);
/* Set control registers */
- aspeed_video_write(video, VE_SEQ_CTRL, seq_ctrl);
- aspeed_video_write(video, VE_CTRL, ctrl);
- aspeed_video_write(video, VE_COMP_CTRL, comp_ctrl);
+ aspeed_video_write(video, VE_CTRL, VE_CTRL_AUTO_OR_CURSOR);
+ aspeed_video_write(video, VE_COMP_CTRL, VE_COMP_CTRL_RSVD);
/* Don't downscale */
aspeed_video_write(video, VE_SCALING_FACTOR, 0x10001000);
@@ -1335,27 +1355,6 @@ static const struct v4l2_ioctl_ops aspeed_video_ioctl_ops = {
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
};
-static void aspeed_video_update_jpeg_quality(struct aspeed_video *video)
-{
- u32 comp_ctrl = FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
- FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
-
- aspeed_video_update(video, VE_COMP_CTRL,
- VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR,
- comp_ctrl);
-}
-
-static void aspeed_video_update_subsampling(struct aspeed_video *video)
-{
- if (video->jpeg.virt)
- aspeed_video_update_jpeg_table(video->jpeg.virt, video->yuv420);
-
- if (video->yuv420)
- aspeed_video_update(video, VE_SEQ_CTRL, 0, VE_SEQ_CTRL_YUV420);
- else
- aspeed_video_update(video, VE_SEQ_CTRL, VE_SEQ_CTRL_YUV420, 0);
-}
-
static int aspeed_video_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct aspeed_video *video = container_of(ctrl->handler,
@@ -1365,16 +1364,13 @@ static int aspeed_video_set_ctrl(struct v4l2_ctrl *ctrl)
switch (ctrl->id) {
case V4L2_CID_JPEG_COMPRESSION_QUALITY:
video->jpeg_quality = ctrl->val;
- aspeed_video_update_jpeg_quality(video);
+ if (test_bit(VIDEO_STREAMING, &video->flags))
+ aspeed_video_update_regs(video);
break;
case V4L2_CID_JPEG_CHROMA_SUBSAMPLING:
- if (ctrl->val == V4L2_JPEG_CHROMA_SUBSAMPLING_420) {
- video->yuv420 = true;
- aspeed_video_update_subsampling(video);
- } else {
- video->yuv420 = false;
- aspeed_video_update_subsampling(video);
- }
+ video->yuv420 = (ctrl->val == V4L2_JPEG_CHROMA_SUBSAMPLING_420);
+ if (test_bit(VIDEO_STREAMING, &video->flags))
+ aspeed_video_update_regs(video);
break;
default:
return -EINVAL;
@@ -1404,6 +1400,8 @@ static void aspeed_video_resolution_work(struct work_struct *work)
aspeed_video_init_regs(video);
+ aspeed_video_update_regs(video);
+
aspeed_video_get_resolution(video);
if (video->detected_timings.width != video->active_timings.width ||
@@ -1518,6 +1516,8 @@ static int aspeed_video_start_streaming(struct vb2_queue *q,
video->perf.duration_max = 0;
video->perf.duration_min = 0xffffffff;
+ aspeed_video_update_regs(video);
+
rc = aspeed_video_start_frame(video);
if (rc) {
aspeed_video_bufs_done(video, VB2_BUF_STATE_QUEUED);
--
2.25.1
next prev parent reply other threads:[~2021-10-14 3:50 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-14 3:48 [PATCH 0/6] add aspeed-jpeg support for aspeed-video Jammy Huang
2021-10-14 3:48 ` [PATCH 1/6] media: aspeed: move err-handling together to the bottom Jammy Huang
2021-10-14 3:48 ` [PATCH 2/6] media: aspeed: add dprintk for more detailed log control Jammy Huang
2021-10-14 6:28 ` Paul Menzel
2021-10-15 2:16 ` Jammy Huang
2021-10-15 8:29 ` Paul Menzel
2021-10-14 3:48 ` Jammy Huang [this message]
2021-10-14 6:36 ` [PATCH 3/6] media: aspeed: refine to centerize format/compress settings Paul Menzel
2021-10-15 5:39 ` Jammy Huang
2021-10-14 3:48 ` [PATCH 4/6] media: aspeed: Support aspeed mode to reduce compressed data Jammy Huang
2021-10-14 6:47 ` Paul Menzel
2021-10-18 8:51 ` Jammy Huang
2021-10-18 9:34 ` Paul Menzel
2021-10-18 10:10 ` Jammy Huang
2021-10-14 3:48 ` [PATCH 5/6] media: aspeed: add comments and macro Jammy Huang
2021-10-14 3:48 ` [PATCH 6/6] media: aspeed: richer debugfs Jammy Huang
2021-10-14 6:54 ` Paul Menzel
2021-10-14 6:57 ` Paul Menzel
2021-10-15 3:29 ` Jammy Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211014034819.2283-4-jammy_huang@aspeedtech.com \
--to=jammy_huang@aspeedtech.com \
--cc=andrew@aj.id.au \
--cc=eajames@linux.ibm.com \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).