From: Potin Lai <potin.lai@quantatw.com>
To: openbmc@lists.ozlabs.org, joel@jms.id.au
Cc: Potin Lai <potin.lai@quantatw.com>
Subject: [PATCH linux dev-5.15 00/26] Add w25q01jvq and convert flash_info format
Date: Fri, 25 Feb 2022 10:41:55 +0800 [thread overview]
Message-ID: <20220225024221.19422-1-potin.lai@quantatw.com> (raw)
This patch series add winbond w25q01jvq flash info and convert flash_info
flags in new format to align with upstream (v5.17).
The patchs from 01 to 25 are cherry-picked from kernel 5.17, and patch 26
is new patch for adding w25q01jvq flash info.
LINK: https://lore.kernel.org/all/20220222092222.23108-1-potin.lai@quantatw.com/
Jonathan Lemon (1):
mtd: spi-nor: Enable locking for n25q128a13
Potin Lai (1):
mtd: spi-nor: winbond: Add support for w25q01jvq
Tudor Ambarus (24):
mtd: spi-nor: core: Fix spi_nor_flash_parameter otp description
mtd: spi-nor: core: Use container_of to get the pointer to struct
spi_nor
mtd: spi-nor: Get rid of nor->page_size
mtd: spi-nor: core: Introduce the late_init() hook
mtd: spi-nor: atmel: Use flash late_init() for locking
mtd: spi-nor: sst: Use flash late_init() for locking
mtd: spi-nor: winbond: Use manufacturer late_init() for OTP ops
mtd: spi-nor: xilinx: Use manufacturer late_init() to set setup method
mtd: spi-nor: sst: Use manufacturer late_init() to set _write()
mtd: spi-nor: spansion: Use manufacturer late_init()
mtd: spi-nor: Fix mtd size for s3an flashes
mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of
calls
mtd: spi-nor: Introduce spi_nor_set_mtd_info()
mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is
defined
mtd: spi-nor: core: Introduce flash_info mfr_flags
mtd: spi-nor: Rework the flash_info flags
mtd: spi-nor: Introduce spi_nor_init_flags()
mtd: spi-nor: Introduce spi_nor_init_fixup_flags()
mtd: spi-nor: core: Init all flash parameters based on SFDP where
possible
mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup()
mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP
mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing
mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP
mtd: spi-nor: issi: is25lp256: Init flash based on SFDP
drivers/mtd/spi-nor/atmel.c | 79 +++--
drivers/mtd/spi-nor/catalyst.c | 15 +-
drivers/mtd/spi-nor/core.c | 536 +++++++++++++++++--------------
drivers/mtd/spi-nor/core.h | 217 ++++++++-----
drivers/mtd/spi-nor/eon.c | 33 +-
drivers/mtd/spi-nor/esmt.c | 15 +-
drivers/mtd/spi-nor/everspin.c | 12 +-
drivers/mtd/spi-nor/fujitsu.c | 3 +-
drivers/mtd/spi-nor/gigadevice.c | 57 ++--
drivers/mtd/spi-nor/intel.c | 12 +-
drivers/mtd/spi-nor/issi.c | 60 ++--
drivers/mtd/spi-nor/macronix.c | 105 +++---
drivers/mtd/spi-nor/micron-st.c | 208 ++++++------
drivers/mtd/spi-nor/otp.c | 2 +-
drivers/mtd/spi-nor/sfdp.c | 20 ++
drivers/mtd/spi-nor/spansion.c | 162 +++++-----
drivers/mtd/spi-nor/sst.c | 96 ++++--
drivers/mtd/spi-nor/swp.c | 2 +-
drivers/mtd/spi-nor/winbond.c | 174 ++++++----
drivers/mtd/spi-nor/xilinx.c | 21 +-
drivers/mtd/spi-nor/xmc.c | 10 +-
include/linux/mtd/spi-nor.h | 2 -
22 files changed, 1045 insertions(+), 796 deletions(-)
--
2.17.1
next reply other threads:[~2022-02-25 2:43 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-25 2:41 Potin Lai [this message]
2022-02-25 2:41 ` [PATCH linux dev-5.15 01/26] mtd: spi-nor: Enable locking for n25q128a13 Potin Lai
2022-02-25 2:41 ` [PATCH linux dev-5.15 02/26] mtd: spi-nor: core: Fix spi_nor_flash_parameter otp description Potin Lai
2022-02-25 2:41 ` [PATCH linux dev-5.15 03/26] mtd: spi-nor: core: Use container_of to get the pointer to struct spi_nor Potin Lai
2022-02-25 2:41 ` [PATCH linux dev-5.15 04/26] mtd: spi-nor: Get rid of nor->page_size Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 05/26] mtd: spi-nor: core: Introduce the late_init() hook Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 06/26] mtd: spi-nor: atmel: Use flash late_init() for locking Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 07/26] mtd: spi-nor: sst: " Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 08/26] mtd: spi-nor: winbond: Use manufacturer late_init() for OTP ops Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 09/26] mtd: spi-nor: xilinx: Use manufacturer late_init() to set setup method Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 10/26] mtd: spi-nor: sst: Use manufacturer late_init() to set _write() Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 11/26] mtd: spi-nor: spansion: Use manufacturer late_init() Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 12/26] mtd: spi-nor: Fix mtd size for s3an flashes Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 13/26] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 14/26] mtd: spi-nor: Introduce spi_nor_set_mtd_info() Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 15/26] mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 16/26] mtd: spi-nor: core: Introduce flash_info mfr_flags Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 17/26] mtd: spi-nor: Rework the flash_info flags Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 18/26] mtd: spi-nor: Introduce spi_nor_init_flags() Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 19/26] mtd: spi-nor: Introduce spi_nor_init_fixup_flags() Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 20/26] mtd: spi-nor: core: Init all flash parameters based on SFDP where possible Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 21/26] mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup() Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 22/26] mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 23/26] mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 24/26] mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 25/26] mtd: spi-nor: issi: is25lp256: " Potin Lai
2022-02-25 2:42 ` [PATCH linux dev-5.15 26/26] mtd: spi-nor: winbond: Add support for w25q01jvq Potin Lai
2022-02-25 4:01 ` [PATCH linux dev-5.15 00/26] Add w25q01jvq and convert flash_info format Joel Stanley
2022-02-25 4:19 ` Potin Lai (賴柏廷)
2022-02-25 4:24 ` Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220225024221.19422-1-potin.lai@quantatw.com \
--to=potin.lai@quantatw.com \
--cc=joel@jms.id.au \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).