[PATCH linux dev-5.15 00/26] Add w25q01jvq and convert flash_info format

[PATCH linux dev-5.15 00/26] Add w25q01jvq and convert flash_info format

[Potin Lai]

This patch series add winbond w25q01jvq flash info and convert flash_info
flags in new format to align with upstream (v5.17).

The patchs from 01 to 25 are cherry-picked from kernel 5.17, and patch 26
is new patch for adding w25q01jvq flash info.

LINK: https://lore.kernel.org/all/20220222092222.23108-1-potin.lai@quantatw.com/

Jonathan Lemon (1):
  mtd: spi-nor: Enable locking for n25q128a13

Potin Lai (1):
  mtd: spi-nor: winbond: Add support for w25q01jvq

Tudor Ambarus (24):
  mtd: spi-nor: core: Fix spi_nor_flash_parameter otp description
  mtd: spi-nor: core: Use container_of to get the pointer to struct
    spi_nor
  mtd: spi-nor: Get rid of nor->page_size
  mtd: spi-nor: core: Introduce the late_init() hook
  mtd: spi-nor: atmel: Use flash late_init() for locking
  mtd: spi-nor: sst: Use flash late_init() for locking
  mtd: spi-nor: winbond: Use manufacturer late_init() for OTP ops
  mtd: spi-nor: xilinx: Use manufacturer late_init() to set setup method
  mtd: spi-nor: sst: Use manufacturer late_init() to set _write()
  mtd: spi-nor: spansion: Use manufacturer late_init()
  mtd: spi-nor: Fix mtd size for s3an flashes
  mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of
    calls
  mtd: spi-nor: Introduce spi_nor_set_mtd_info()
  mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is
    defined
  mtd: spi-nor: core: Introduce flash_info mfr_flags
  mtd: spi-nor: Rework the flash_info flags
  mtd: spi-nor: Introduce spi_nor_init_flags()
  mtd: spi-nor: Introduce spi_nor_init_fixup_flags()
  mtd: spi-nor: core: Init all flash parameters based on SFDP where
    possible
  mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup()
  mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP
  mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing
  mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP
  mtd: spi-nor: issi: is25lp256: Init flash based on SFDP

 drivers/mtd/spi-nor/atmel.c      |  79 +++--
 drivers/mtd/spi-nor/catalyst.c   |  15 +-
 drivers/mtd/spi-nor/core.c       | 536 +++++++++++++++++--------------
 drivers/mtd/spi-nor/core.h       | 217 ++++++++-----
 drivers/mtd/spi-nor/eon.c        |  33 +-
 drivers/mtd/spi-nor/esmt.c       |  15 +-
 drivers/mtd/spi-nor/everspin.c   |  12 +-
 drivers/mtd/spi-nor/fujitsu.c    |   3 +-
 drivers/mtd/spi-nor/gigadevice.c |  57 ++--
 drivers/mtd/spi-nor/intel.c      |  12 +-
 drivers/mtd/spi-nor/issi.c       |  60 ++--
 drivers/mtd/spi-nor/macronix.c   | 105 +++---
 drivers/mtd/spi-nor/micron-st.c  | 208 ++++++------
 drivers/mtd/spi-nor/otp.c        |   2 +-
 drivers/mtd/spi-nor/sfdp.c       |  20 ++
 drivers/mtd/spi-nor/spansion.c   | 162 +++++-----
 drivers/mtd/spi-nor/sst.c        |  96 ++++--
 drivers/mtd/spi-nor/swp.c        |   2 +-
 drivers/mtd/spi-nor/winbond.c    | 174 ++++++----
 drivers/mtd/spi-nor/xilinx.c     |  21 +-
 drivers/mtd/spi-nor/xmc.c        |  10 +-
 include/linux/mtd/spi-nor.h      |   2 -
 22 files changed, 1045 insertions(+), 796 deletions(-)

-- 
2.17.1

[PATCH linux dev-5.15 01/26] mtd: spi-nor: Enable locking for n25q128a13

[Potin Lai]

From: Jonathan Lemon <jonathan.lemon@gmail.com>

As 4bit block protection patchset for some micron models are merged,
n25q128a13 also uses 4 bit Block Protection scheme, so enable locking
for it. Tested it on n25q128a13, the locking functions work well.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210628211729.3625017-1-jonathan.lemon@gmail.com
---
 drivers/mtd/spi-nor/micron-st.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index c224e59820a1..f3d19b716b7b 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -146,7 +146,9 @@ static const struct flash_info st_parts[] = {
 			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
 			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
 	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
 	{ "mt25ql256a",  INFO6(0x20ba19, 0x104400, 64 * 1024,  512,
 			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
 			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-- 
2.17.1

[PATCH linux dev-5.15 02/26] mtd: spi-nor: core: Fix spi_nor_flash_parameter otp description

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Update the description of the otp member of the
struct spi_nor_flash_parameter.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20211029172633.886453-2-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 3348e1dd1445..da3fd3636d3c 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -250,7 +250,7 @@ struct spi_nor_otp {
  *                      higher index in the array, the higher priority.
  * @erase_map:		the erase map parsed from the SFDP Sector Map Parameter
  *                      Table.
- * @otp_info:		describes the OTP regions.
+ * @otp:		SPI NOR OTP info.
  * @octal_dtr_enable:	enables SPI NOR octal DTR mode.
  * @quad_enable:	enables SPI NOR quad mode.
  * @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode.
@@ -262,7 +262,6 @@ struct spi_nor_otp {
  *                      e.g. different opcodes, specific address calculation,
  *                      page size, etc.
  * @locking_ops:	SPI NOR locking methods.
- * @otp:		SPI NOR OTP methods.
  */
 struct spi_nor_flash_parameter {
 	u64				size;
-- 
2.17.1

[PATCH linux dev-5.15 03/26] mtd: spi-nor: core: Use container_of to get the pointer to struct spi_nor

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

"struct mtd_info mtd" is member of "struct spi_nor", there's no need
to use "mtd->priv". Get the pointer to the containing struct spi_nor
by using container_of. While here, make the function inline and
get rid of the __maybe_unused.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211029172633.886453-3-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.c | 1 -
 drivers/mtd/spi-nor/core.h | 4 ++--
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index cc08bd707378..277d1fde84c8 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3134,7 +3134,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 
 	if (!mtd->name)
 		mtd->name = dev_name(dev);
-	mtd->priv = nor;
 	mtd->type = MTD_NORFLASH;
 	mtd->writesize = nor->params->writesize;
 	mtd->flags = MTD_CAP_NORFLASH;
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index da3fd3636d3c..223a03769950 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -551,9 +551,9 @@ void spi_nor_try_unlock_all(struct spi_nor *nor);
 void spi_nor_register_locking_ops(struct spi_nor *nor);
 void spi_nor_otp_init(struct spi_nor *nor);
 
-static struct spi_nor __maybe_unused *mtd_to_spi_nor(struct mtd_info *mtd)
+static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
 {
-	return mtd->priv;
+	return container_of(mtd, struct spi_nor, mtd);
 }
 
 #endif /* __LINUX_MTD_SPI_NOR_INTERNAL_H */
-- 
2.17.1

[PATCH linux dev-5.15 04/26] mtd: spi-nor: Get rid of nor->page_size

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

nor->page_size duplicated what nor->params->page_size indicates
for no good reason. page_size is a flash parameter of fixed value
and it is better suited to be found in nor->params->page_size.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20211029172633.886453-5-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.c   | 19 +++++++++----------
 drivers/mtd/spi-nor/xilinx.c | 17 ++++++++++-------
 include/linux/mtd/spi-nor.h  |  2 --
 3 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 277d1fde84c8..3ec0959ffc20 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1952,6 +1952,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 	struct spi_nor *nor = mtd_to_spi_nor(mtd);
 	size_t page_offset, page_remain, i;
 	ssize_t ret;
+	u32 page_size = nor->params->page_size;
 
 	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
 
@@ -1968,16 +1969,15 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 		 * calculated with an AND operation. On the other cases we
 		 * need to do a modulus operation (more expensive).
 		 */
-		if (is_power_of_2(nor->page_size)) {
-			page_offset = addr & (nor->page_size - 1);
+		if (is_power_of_2(page_size)) {
+			page_offset = addr & (page_size - 1);
 		} else {
 			uint64_t aux = addr;
 
-			page_offset = do_div(aux, nor->page_size);
+			page_offset = do_div(aux, page_size);
 		}
 		/* the size of data remaining on the first page */
-		page_remain = min_t(size_t,
-				    nor->page_size - page_offset, len - i);
+		page_remain = min_t(size_t, page_size - page_offset, len - i);
 
 		addr = spi_nor_convert_addr(nor, addr);
 
@@ -3094,7 +3094,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	 * We need the bounce buffer early to read/write registers when going
 	 * through the spi-mem layer (buffers have to be DMA-able).
 	 * For spi-mem drivers, we'll reallocate a new buffer if
-	 * nor->page_size turns out to be greater than PAGE_SIZE (which
+	 * nor->params->page_size turns out to be greater than PAGE_SIZE (which
 	 * shouldn't happen before long since NOR pages are usually less
 	 * than 1KB) after spi_nor_scan() returns.
 	 */
@@ -3170,8 +3170,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 		mtd->flags |= MTD_NO_ERASE;
 
 	mtd->dev.parent = dev;
-	nor->page_size = nor->params->page_size;
-	mtd->writebufsize = nor->page_size;
+	mtd->writebufsize = nor->params->page_size;
 
 	if (of_property_read_bool(np, "broken-flash-reset"))
 		nor->flags |= SNOR_F_BROKEN_RESET;
@@ -3340,8 +3339,8 @@ static int spi_nor_probe(struct spi_mem *spimem)
 	 * and add this logic so that if anyone ever adds support for such
 	 * a NOR we don't end up with buffer overflows.
 	 */
-	if (nor->page_size > PAGE_SIZE) {
-		nor->bouncebuf_size = nor->page_size;
+	if (nor->params->page_size > PAGE_SIZE) {
+		nor->bouncebuf_size = nor->params->page_size;
 		devm_kfree(nor->dev, nor->bouncebuf);
 		nor->bouncebuf = devm_kmalloc(nor->dev,
 					      nor->bouncebuf_size,
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 1138bdbf4199..0658e47564ba 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -28,11 +28,12 @@ static const struct flash_info xilinx_parts[] = {
  */
 static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
 {
+	u32 page_size = nor->params->page_size;
 	u32 offset, page;
 
-	offset = addr % nor->page_size;
-	page = addr / nor->page_size;
-	page <<= (nor->page_size > 512) ? 10 : 9;
+	offset = addr % page_size;
+	page = addr / page_size;
+	page <<= (page_size > 512) ? 10 : 9;
 
 	return page | offset;
 }
@@ -40,6 +41,7 @@ static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
 static int xilinx_nor_setup(struct spi_nor *nor,
 			    const struct spi_nor_hwcaps *hwcaps)
 {
+	u32 page_size;
 	int ret;
 
 	ret = spi_nor_xread_sr(nor, nor->bouncebuf);
@@ -64,10 +66,11 @@ static int xilinx_nor_setup(struct spi_nor *nor,
 	 */
 	if (nor->bouncebuf[0] & XSR_PAGESIZE) {
 		/* Flash in Power of 2 mode */
-		nor->page_size = (nor->page_size == 264) ? 256 : 512;
-		nor->mtd.writebufsize = nor->page_size;
-		nor->mtd.size = 8 * nor->page_size * nor->info->n_sectors;
-		nor->mtd.erasesize = 8 * nor->page_size;
+		page_size = (nor->params->page_size == 264) ? 256 : 512;
+		nor->params->page_size = page_size;
+		nor->mtd.writebufsize = page_size;
+		nor->mtd.size = 8 * page_size * nor->info->n_sectors;
+		nor->mtd.erasesize = 8 * page_size;
 	} else {
 		/* Flash in Default addressing mode */
 		nor->params->convert_addr = s3an_convert_addr;
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index f67457748ed8..fc90fce26e33 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -371,7 +371,6 @@ struct spi_nor_flash_parameter;
  * @bouncebuf_size:	size of the bounce buffer
  * @info:		SPI NOR part JEDEC MFR ID and other info
  * @manufacturer:	SPI NOR manufacturer
- * @page_size:		the page size of the SPI NOR
  * @addr_width:		number of address bytes
  * @erase_opcode:	the opcode for erasing a sector
  * @read_opcode:	the read opcode
@@ -401,7 +400,6 @@ struct spi_nor {
 	size_t			bouncebuf_size;
 	const struct flash_info	*info;
 	const struct spi_nor_manufacturer *manufacturer;
-	u32			page_size;
 	u8			addr_width;
 	u8			erase_opcode;
 	u8			read_opcode;
-- 
2.17.1

[PATCH linux dev-5.15 05/26] mtd: spi-nor: core: Introduce the late_init() hook

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Flash parameters init is done in a spaghetti way right now.
There is the init based on the flash_info data, then there is the
default_init() hook, then SFDP init, an intermediary post_bft(),
then post_sfdp() and a spi_nor_late_init_params(). Each method can
overwrite previuosly initialized parameters.

We want to separate what is SFDP and non-SFDP specific. late_init()
will replace the default_init() hook and will be used only to initialize
flash parameters that are not declared in the JESD216 SFDP standard, or
where SFDP tables are not defined at all.
We cut a member in the chain of initializing parameters by getting rid
of the default_init() hook, and we make it clear that everything that is
in late_init() is not covered by the SFDP tables defined by the flash.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211029172633.886453-6-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.c | 17 +++++++++++++----
 drivers/mtd/spi-nor/core.h |  4 ++++
 2 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 3ec0959ffc20..88dd0908d172 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2666,11 +2666,19 @@ static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
  * spi_nor_late_init_params() - Late initialization of default flash parameters.
  * @nor:	pointer to a 'struct spi_nor'
  *
- * Used to set default flash parameters and settings when the ->default_init()
- * hook or the SFDP parser let voids.
+ * Used to initialize flash parameters that are not declared in the JESD216
+ * SFDP standard, or where SFDP tables are not defined at all.
+ * Will replace the spi_nor_manufacturer_init_params() method.
  */
 static void spi_nor_late_init_params(struct spi_nor *nor)
 {
+	if (nor->manufacturer && nor->manufacturer->fixups &&
+	    nor->manufacturer->fixups->late_init)
+		nor->manufacturer->fixups->late_init(nor);
+
+	if (nor->info->fixups && nor->info->fixups->late_init)
+		nor->info->fixups->late_init(nor);
+
 	/*
 	 * NOR protection support. When locking_ops are not provided, we pick
 	 * the default ones.
@@ -2712,8 +2720,9 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
  *    wrong).
  *		spi_nor_post_sfdp_fixups()
  *
- * 5/ Late default flash parameters initialization, used when the
- * ->default_init() hook or the SFDP parser do not set specific params.
+ * 5/ Late flash parameters initialization, used to initialize flash
+ * parameters that are not declared in the JESD216 SFDP standard, or where SFDP
+ * tables are not defined at all.
  *		spi_nor_late_init_params()
  */
 static int spi_nor_init_params(struct spi_nor *nor)
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 223a03769950..50bae06bc024 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -297,6 +297,9 @@ struct spi_nor_flash_parameter {
  *             parameters that could not be extracted by other means (i.e.
  *             when information provided by the SFDP/flash_info tables are
  *             incomplete or wrong).
+ * @late_init: used to initialize flash parameters that are not declared in the
+ *             JESD216 SFDP standard, or where SFDP tables not defined at all.
+ *             Will replace the default_init() hook.
  *
  * Those hooks can be used to tweak the SPI NOR configuration when the SFDP
  * table is broken or not available.
@@ -307,6 +310,7 @@ struct spi_nor_fixups {
 			 const struct sfdp_parameter_header *bfpt_header,
 			 const struct sfdp_bfpt *bfpt);
 	void (*post_sfdp)(struct spi_nor *nor);
+	void (*late_init)(struct spi_nor *nor);
 };
 
 struct flash_info {
-- 
2.17.1

[PATCH linux dev-5.15 06/26] mtd: spi-nor: atmel: Use flash late_init() for locking

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Locking is not described in JESD216 SFDP standard, place the
locking init in late_init().

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211029172633.886453-7-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/atmel.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index 1fea5cab492c..d0e7883b38e3 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -48,13 +48,13 @@ static const struct spi_nor_locking_ops atmel_at25fs_locking_ops = {
 	.is_locked = atmel_at25fs_is_locked,
 };
 
-static void atmel_at25fs_default_init(struct spi_nor *nor)
+static void atmel_at25fs_late_init(struct spi_nor *nor)
 {
 	nor->params->locking_ops = &atmel_at25fs_locking_ops;
 }
 
 static const struct spi_nor_fixups atmel_at25fs_fixups = {
-	.default_init = atmel_at25fs_default_init,
+	.late_init = atmel_at25fs_late_init,
 };
 
 /**
@@ -146,13 +146,13 @@ static const struct spi_nor_locking_ops atmel_global_protection_ops = {
 	.is_locked = atmel_is_global_protected,
 };
 
-static void atmel_global_protection_default_init(struct spi_nor *nor)
+static void atmel_global_protection_late_init(struct spi_nor *nor)
 {
 	nor->params->locking_ops = &atmel_global_protection_ops;
 }
 
 static const struct spi_nor_fixups atmel_global_protection_fixups = {
-	.default_init = atmel_global_protection_default_init,
+	.late_init = atmel_global_protection_late_init,
 };
 
 static const struct flash_info atmel_parts[] = {
-- 
2.17.1

[PATCH linux dev-5.15 07/26] mtd: spi-nor: sst: Use flash late_init() for locking

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Locking is not described in JESD216 SFDP standard, place the
locking init in late_init().

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211029172633.886453-8-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/sst.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 980f4c09c91d..660aabde477a 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -46,13 +46,13 @@ static const struct spi_nor_locking_ops sst26vf_locking_ops = {
 	.is_locked = sst26vf_is_locked,
 };
 
-static void sst26vf_default_init(struct spi_nor *nor)
+static void sst26vf_late_init(struct spi_nor *nor)
 {
 	nor->params->locking_ops = &sst26vf_locking_ops;
 }
 
 static const struct spi_nor_fixups sst26vf_fixups = {
-	.default_init = sst26vf_default_init,
+	.late_init = sst26vf_late_init,
 };
 
 static const struct flash_info sst_parts[] = {
-- 
2.17.1

[PATCH linux dev-5.15 08/26] mtd: spi-nor: winbond: Use manufacturer late_init() for OTP ops

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

OTP is not described in the JESD216 SFDP standard, place the
OTP ops init in late_init().

We can't get rid of the default_init() hook for winbond, as the
4byte_addr_mode is SFDP specific and will require to have all
flashes at hand, in order to check which has the SFDP tables defined,
in which case there's nothing to do if the SFDP tables are corect,
and which of the flashes do not define the SFDP tables in which case
each flash should declare a late_init() fixup.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211029172633.886453-9-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/winbond.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index c783ab4ba1e4..f0f73e1cc403 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -149,12 +149,17 @@ static const struct spi_nor_otp_ops winbond_otp_ops = {
 static void winbond_default_init(struct spi_nor *nor)
 {
 	nor->params->set_4byte_addr_mode = winbond_set_4byte_addr_mode;
+}
+
+static void winbond_late_init(struct spi_nor *nor)
+{
 	if (nor->params->otp.org->n_regions)
 		nor->params->otp.ops = &winbond_otp_ops;
 }
 
 static const struct spi_nor_fixups winbond_fixups = {
 	.default_init = winbond_default_init,
+	.late_init = winbond_late_init,
 };
 
 const struct spi_nor_manufacturer spi_nor_winbond = {
-- 
2.17.1

[PATCH linux dev-5.15 09/26] mtd: spi-nor: xilinx: Use manufacturer late_init() to set setup method

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

post_sfdp was misleading in this case, as SFDP is not supported by
xilinx. Plus, there's no fixup here, just setting the correct
setup method, as required by xilinx parts.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211029172633.886453-10-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/xilinx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 0658e47564ba..7e970ccf7903 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -80,13 +80,13 @@ static int xilinx_nor_setup(struct spi_nor *nor,
 	return 0;
 }
 
-static void xilinx_post_sfdp_fixups(struct spi_nor *nor)
+static void xilinx_late_init(struct spi_nor *nor)
 {
 	nor->params->setup = xilinx_nor_setup;
 }
 
 static const struct spi_nor_fixups xilinx_fixups = {
-	.post_sfdp = xilinx_post_sfdp_fixups,
+	.late_init = xilinx_late_init,
 };
 
 const struct spi_nor_manufacturer spi_nor_xilinx = {
-- 
2.17.1

[PATCH linux dev-5.15 10/26] mtd: spi-nor: sst: Use manufacturer late_init() to set _write()

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Setting the correct nor->mtd._write in a fixup hook was misleading,
since this is not a fixup, just a specific setting for SST, that differs
from the SPI NOR core default init.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211029172633.886453-11-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/sst.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 660aabde477a..3593aae0920f 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -177,14 +177,14 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 	return ret;
 }
 
-static void sst_post_sfdp_fixups(struct spi_nor *nor)
+static void sst_late_init(struct spi_nor *nor)
 {
 	if (nor->info->flags & SST_WRITE)
 		nor->mtd._write = sst_write;
 }
 
 static const struct spi_nor_fixups sst_fixups = {
-	.post_sfdp = sst_post_sfdp_fixups,
+	.late_init = sst_late_init,
 };
 
 const struct spi_nor_manufacturer spi_nor_sst = {
-- 
2.17.1

[PATCH linux dev-5.15 11/26] mtd: spi-nor: spansion: Use manufacturer late_init()

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

spansion_post_sfdp_fixups() was called regardless if the flash defined
SFDP tables or not. A better place for this kind of parameters init is
in manufacturer's late_init() hook. post_sfdp() should be called only
when SFDP is defined. No functional change in this patch.

Instead of doing the 4b opcodes settings at manufacturer level, thus
also for every flash that will be introduced, this should be done
just where it is needed, per flash. I'll let this for other patch.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211029172633.886453-12-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/spansion.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index ee82dcd75310..a3ea0135f7b1 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -276,7 +276,7 @@ static const struct flash_info spansion_parts[] = {
 	},
 };
 
-static void spansion_post_sfdp_fixups(struct spi_nor *nor)
+static void spansion_late_init(struct spi_nor *nor)
 {
 	if (nor->params->size <= SZ_16M)
 		return;
@@ -288,7 +288,7 @@ static void spansion_post_sfdp_fixups(struct spi_nor *nor)
 }
 
 static const struct spi_nor_fixups spansion_fixups = {
-	.post_sfdp = spansion_post_sfdp_fixups,
+	.late_init = spansion_late_init,
 };
 
 const struct spi_nor_manufacturer spi_nor_spansion = {
-- 
2.17.1

[PATCH linux dev-5.15 12/26] mtd: spi-nor: Fix mtd size for s3an flashes

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

As it was before the blamed commit, s3an_nor_scan() was called
after mtd size was set with params->size, and it overwrote the mtd
size value with '8 * nor->page_size * nor->info->n_sectors' when
XSR_PAGESIZE was set. With the introduction of
s3an_post_sfdp_fixups(), we missed to update the mtd size for the
s3an flashes. Fix the mtd size by updating both nor->params->size,
(which will update the mtd_info size later on) and nor->mtd.size
(which is used in spi_nor_set_addr_width()).

Fixes: 641edddb4f43 ("mtd: spi-nor: Add s3an_post_sfdp_fixups()")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211207140254.87681-2-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/xilinx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 7e970ccf7903..03d3b006a039 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -69,7 +69,8 @@ static int xilinx_nor_setup(struct spi_nor *nor,
 		page_size = (nor->params->page_size == 264) ? 256 : 512;
 		nor->params->page_size = page_size;
 		nor->mtd.writebufsize = page_size;
-		nor->mtd.size = 8 * page_size * nor->info->n_sectors;
+		nor->params->size = 8 * page_size * nor->info->n_sectors;
+		nor->mtd.size = nor->params->size;
 		nor->mtd.erasesize = 8 * page_size;
 	} else {
 		/* Flash in Default addressing mode */
-- 
2.17.1

[PATCH linux dev-5.15 13/26] mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of calls

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Use NOR parameters in the probe's sequence of calls, thus
nor->params->size instead of nor->mtd.size and let the mtd_info
fields be used by the mtd calls (mtd->_erase, mtd->_read, mtd->_write).
mtd_info fields should not be used during probe because we haven't
registered mtd yet. It's safe to drop xilinx's setting of nor->mtd.size,
now that we use nor->params->size in spi_nor_set_addr_width().

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211207140254.87681-3-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.c   | 8 ++++----
 drivers/mtd/spi-nor/xilinx.c | 1 -
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 88dd0908d172..5b9c827d411c 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2115,7 +2115,7 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
 	 */
 	op->addr.nbytes = 4;
 	if (!spi_mem_supports_op(nor->spimem, op)) {
-		if (nor->mtd.size > SZ_16M)
+		if (nor->params->size > SZ_16M)
 			return -EOPNOTSUPP;
 
 		/* If flash size <= 16MB, 3 address bytes are sufficient */
@@ -3011,7 +3011,7 @@ static int spi_nor_set_addr_width(struct spi_nor *nor)
 		nor->addr_width = 3;
 	}
 
-	if (nor->addr_width == 3 && nor->mtd.size > 0x1000000) {
+	if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
 		/* enable 4-byte addressing if the device exceeds 16MiB */
 		nor->addr_width = 4;
 	}
@@ -3245,7 +3245,7 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor)
 				      SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
 				      SPI_MEM_OP_DATA_IN(0, NULL, 0)),
 		.offset = 0,
-		.length = nor->mtd.size,
+		.length = nor->params->size,
 	};
 	struct spi_mem_op *op = &info.op_tmpl;
 
@@ -3276,7 +3276,7 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor)
 				      SPI_MEM_OP_NO_DUMMY,
 				      SPI_MEM_OP_DATA_OUT(0, NULL, 0)),
 		.offset = 0,
-		.length = nor->mtd.size,
+		.length = nor->params->size,
 	};
 	struct spi_mem_op *op = &info.op_tmpl;
 
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 03d3b006a039..580562bc1e45 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -70,7 +70,6 @@ static int xilinx_nor_setup(struct spi_nor *nor,
 		nor->params->page_size = page_size;
 		nor->mtd.writebufsize = page_size;
 		nor->params->size = 8 * page_size * nor->info->n_sectors;
-		nor->mtd.size = nor->params->size;
 		nor->mtd.erasesize = 8 * page_size;
 	} else {
 		/* Flash in Default addressing mode */
-- 
2.17.1

[PATCH linux dev-5.15 14/26] mtd: spi-nor: Introduce spi_nor_set_mtd_info()

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Used to init all the mtd_info fields. Move the mtd_info init
the last thing in the spi_nor_scan(), so that we avoid superfluous
initialization of the mtd_info fields in case of errors.

While here use common naming scheme for functions that are setting
mtd_info fields:
s/spi_nor_register_locking_ops/spi_nor_set_mtd_locking_ops
s/spi_nor_otp_init/spi_nor_set_mtd_otp_ops
The functions names are self explanatory, get rid of the comment
for the OTP function.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211207140254.87681-4-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.c | 56 +++++++++++++++++++++-----------------
 drivers/mtd/spi-nor/core.h |  4 +--
 drivers/mtd/spi-nor/otp.c  |  2 +-
 drivers/mtd/spi-nor/swp.c  |  2 +-
 4 files changed, 35 insertions(+), 29 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 5b9c827d411c..dbb2c98c0366 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3080,6 +3080,35 @@ static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor,
 	return info;
 }
 
+static void spi_nor_set_mtd_info(struct spi_nor *nor)
+{
+	struct mtd_info *mtd = &nor->mtd;
+	struct device *dev = nor->dev;
+
+	spi_nor_set_mtd_locking_ops(nor);
+	spi_nor_set_mtd_otp_ops(nor);
+
+	mtd->dev.parent = dev;
+	if (!mtd->name)
+		mtd->name = dev_name(dev);
+	mtd->type = MTD_NORFLASH;
+	mtd->flags = MTD_CAP_NORFLASH;
+	if (nor->info->flags & SPI_NOR_NO_ERASE)
+		mtd->flags |= MTD_NO_ERASE;
+	mtd->writesize = nor->params->writesize;
+	mtd->writebufsize = nor->params->page_size;
+	mtd->size = nor->params->size;
+	mtd->_erase = spi_nor_erase;
+	mtd->_read = spi_nor_read;
+	/* Might be already set by some SST flashes. */
+	if (!mtd->_write)
+		mtd->_write = spi_nor_write;
+	mtd->_suspend = spi_nor_suspend;
+	mtd->_resume = spi_nor_resume;
+	mtd->_get_device = spi_nor_get_device;
+	mtd->_put_device = spi_nor_put_device;
+}
+
 int spi_nor_scan(struct spi_nor *nor, const char *name,
 		 const struct spi_nor_hwcaps *hwcaps)
 {
@@ -3134,26 +3163,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	if (info->flags & SPI_NOR_HAS_LOCK)
 		nor->flags |= SNOR_F_HAS_LOCK;
 
-	mtd->_write = spi_nor_write;
-
 	/* Init flash parameters based on flash_info struct and SFDP */
 	ret = spi_nor_init_params(nor);
 	if (ret)
 		return ret;
 
-	if (!mtd->name)
-		mtd->name = dev_name(dev);
-	mtd->type = MTD_NORFLASH;
-	mtd->writesize = nor->params->writesize;
-	mtd->flags = MTD_CAP_NORFLASH;
-	mtd->size = nor->params->size;
-	mtd->_erase = spi_nor_erase;
-	mtd->_read = spi_nor_read;
-	mtd->_suspend = spi_nor_suspend;
-	mtd->_resume = spi_nor_resume;
-	mtd->_get_device = spi_nor_get_device;
-	mtd->_put_device = spi_nor_put_device;
-
 	if (info->flags & USE_FSR)
 		nor->flags |= SNOR_F_USE_FSR;
 	if (info->flags & SPI_NOR_HAS_TB) {
@@ -3175,12 +3189,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 			nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
 	}
 
-	if (info->flags & SPI_NOR_NO_ERASE)
-		mtd->flags |= MTD_NO_ERASE;
-
-	mtd->dev.parent = dev;
-	mtd->writebufsize = nor->params->page_size;
-
 	if (of_property_read_bool(np, "broken-flash-reset"))
 		nor->flags |= SNOR_F_BROKEN_RESET;
 
@@ -3204,15 +3212,13 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	if (ret)
 		return ret;
 
-	spi_nor_register_locking_ops(nor);
-
 	/* Send all the required SPI flash commands to initialize device */
 	ret = spi_nor_init(nor);
 	if (ret)
 		return ret;
 
-	/* Configure OTP parameters and ops */
-	spi_nor_otp_init(nor);
+	/* No mtd_info fields should be used up to this point. */
+	spi_nor_set_mtd_info(nor);
 
 	dev_info(dev, "%s (%lld Kbytes)\n", info->name,
 			(long long)mtd->size >> 10);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 50bae06bc024..f6c4b6f4743b 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -552,8 +552,8 @@ int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
 
 void spi_nor_init_default_locking_ops(struct spi_nor *nor);
 void spi_nor_try_unlock_all(struct spi_nor *nor);
-void spi_nor_register_locking_ops(struct spi_nor *nor);
-void spi_nor_otp_init(struct spi_nor *nor);
+void spi_nor_set_mtd_locking_ops(struct spi_nor *nor);
+void spi_nor_set_mtd_otp_ops(struct spi_nor *nor);
 
 static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
 {
diff --git a/drivers/mtd/spi-nor/otp.c b/drivers/mtd/spi-nor/otp.c
index 983e40b19134..fa63d8571218 100644
--- a/drivers/mtd/spi-nor/otp.c
+++ b/drivers/mtd/spi-nor/otp.c
@@ -480,7 +480,7 @@ static int spi_nor_mtd_otp_lock(struct mtd_info *mtd, loff_t from, size_t len)
 	return ret;
 }
 
-void spi_nor_otp_init(struct spi_nor *nor)
+void spi_nor_set_mtd_otp_ops(struct spi_nor *nor)
 {
 	struct mtd_info *mtd = &nor->mtd;
 
diff --git a/drivers/mtd/spi-nor/swp.c b/drivers/mtd/spi-nor/swp.c
index 8594bcbb7dbe..1f178313ba8f 100644
--- a/drivers/mtd/spi-nor/swp.c
+++ b/drivers/mtd/spi-nor/swp.c
@@ -414,7 +414,7 @@ void spi_nor_try_unlock_all(struct spi_nor *nor)
 		dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
 }
 
-void spi_nor_register_locking_ops(struct spi_nor *nor)
+void spi_nor_set_mtd_locking_ops(struct spi_nor *nor)
 {
 	struct mtd_info *mtd = &nor->mtd;
 
-- 
2.17.1

[PATCH linux dev-5.15 15/26] mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

spi_nor_post_sfdp_fixups() was called even when there were no SFDP
tables defined. late_init() should be instead used for flashes that
do not define SFDP tables.

Use spi_nor_post_sfdp_fixups() just to fix SFDP data. post_sfdp()
hook is as of now used just by s28hs512t, mt35xu512aba, and both
support SFDP, there's no functional change with this patch.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211207140254.87681-5-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.c | 33 ++++-----------------------------
 drivers/mtd/spi-nor/sfdp.c | 20 ++++++++++++++++++++
 2 files changed, 24 insertions(+), 29 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index dbb2c98c0366..115261f0e904 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2642,26 +2642,6 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
 	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
 }
 
-/**
- * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
- * after SFDP has been parsed (is also called for SPI NORs that do not
- * support RDSFDP).
- * @nor:	pointer to a 'struct spi_nor'
- *
- * Typically used to tweak various parameters that could not be extracted by
- * other means (i.e. when information provided by the SFDP/flash_info tables
- * are incomplete or wrong).
- */
-static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
-{
-	if (nor->manufacturer && nor->manufacturer->fixups &&
-	    nor->manufacturer->fixups->post_sfdp)
-		nor->manufacturer->fixups->post_sfdp(nor);
-
-	if (nor->info->fixups && nor->info->fixups->post_sfdp)
-		nor->info->fixups->post_sfdp(nor);
-}
-
 /**
  * spi_nor_late_init_params() - Late initialization of default flash parameters.
  * @nor:	pointer to a 'struct spi_nor'
@@ -2712,15 +2692,12 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
  *    Please note that there is a ->post_bfpt() fixup hook that can overwrite
  *    the flash parameters and settings immediately after parsing the Basic
  *    Flash Parameter Table.
+ *    spi_nor_post_sfdp_fixups() is called after the SFDP tables are parsed.
+ *    It is used to tweak various flash parameters when information provided
+ *    by the SFDP tables are wrong.
  *
  * which can be overwritten by:
- * 4/ Post SFDP flash parameters initialization. Used to tweak various
- *    parameters that could not be extracted by other means (i.e. when
- *    information provided by the SFDP/flash_info tables are incomplete or
- *    wrong).
- *		spi_nor_post_sfdp_fixups()
- *
- * 5/ Late flash parameters initialization, used to initialize flash
+ * 4/ Late flash parameters initialization, used to initialize flash
  * parameters that are not declared in the JESD216 SFDP standard, or where SFDP
  * tables are not defined at all.
  *		spi_nor_late_init_params()
@@ -2740,8 +2717,6 @@ static int spi_nor_init_params(struct spi_nor *nor)
 	    !(nor->info->flags & SPI_NOR_SKIP_SFDP))
 		spi_nor_sfdp_init_params(nor);
 
-	spi_nor_post_sfdp_fixups(nor);
-
 	spi_nor_late_init_params(nor);
 
 	return 0;
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index c500c2118a5d..a5211543d30d 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -1228,6 +1228,25 @@ static int spi_nor_parse_sccr(struct spi_nor *nor,
 	return ret;
 }
 
+/**
+ * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
+ * after SFDP has been parsed. Called only for flashes that define JESD216 SFDP
+ * tables.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * Used to tweak various flash parameters when information provided by the SFDP
+ * tables are wrong.
+ */
+static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
+{
+	if (nor->manufacturer && nor->manufacturer->fixups &&
+	    nor->manufacturer->fixups->post_sfdp)
+		nor->manufacturer->fixups->post_sfdp(nor);
+
+	if (nor->info->fixups && nor->info->fixups->post_sfdp)
+		nor->info->fixups->post_sfdp(nor);
+}
+
 /**
  * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
  * @nor:		pointer to a 'struct spi_nor'
@@ -1408,6 +1427,7 @@ int spi_nor_parse_sfdp(struct spi_nor *nor)
 		}
 	}
 
+	spi_nor_post_sfdp_fixups(nor);
 exit:
 	kfree(param_headers);
 	return err;
-- 
2.17.1

[PATCH linux dev-5.15 16/26] mtd: spi-nor: core: Introduce flash_info mfr_flags

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Used in the manufacturer fixup hooks to differentiate support
between flashes of the same manufacturer. Not used in the
SPI NOR core.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211207140254.87681-6-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.h | 10 +++++++++-
 drivers/mtd/spi-nor/sst.c  | 41 ++++++++++++++++++++++++++++----------
 2 files changed, 40 insertions(+), 11 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index f6c4b6f4743b..a9fd956eed4e 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -336,7 +336,6 @@ struct flash_info {
 	u32		flags;
 #define SECT_4K			BIT(0)	/* SPINOR_OP_BE_4K works uniformly */
 #define SPI_NOR_NO_ERASE	BIT(1)	/* No erase command needed */
-#define SST_WRITE		BIT(2)	/* use SST byte programming */
 #define SPI_NOR_NO_FR		BIT(3)	/* Can't do fastread */
 #define SECT_4K_PMC		BIT(4)	/* SPINOR_OP_BE_4K_PMC works uniformly */
 #define SPI_NOR_DUAL_READ	BIT(5)	/* Flash supports Dual Read */
@@ -385,6 +384,12 @@ struct flash_info {
 					 * protection bits. Usually these will
 					 * power-up in a write-protected state.
 					 */
+	u8 mfr_flags;			/*
+					 * Manufacturer private flags. Used in
+					 * the manufacturer fixup hooks to
+					 * differentiate support between flashes
+					 * of the same manufacturer.
+					 */
 
 	const struct spi_nor_otp_organization otp_org;
 
@@ -450,6 +455,9 @@ struct flash_info {
 			.n_regions = (_n_regions),			\
 		},
 
+#define MFR_FLAGS(_mfr_flags)						\
+		.mfr_flags = (_mfr_flags),				\
+
 /**
  * struct spi_nor_manufacturer - SPI NOR manufacturer object
  * @name: manufacturer name
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 3593aae0920f..8f1ebb8fd05f 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -8,6 +8,9 @@
 
 #include "core.h"
 
+/* SST flash_info mfr_flag. Used to specify SST byte programming. */
+#define SST_WRITE		BIT(0)
+
 #define SST26VF_CR_BPNV		BIT(3)
 
 static int sst26vf_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
@@ -58,28 +61,46 @@ static const struct spi_nor_fixups sst26vf_fixups = {
 static const struct flash_info sst_parts[] = {
 	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
 	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+			      SECT_4K | SPI_NOR_HAS_LOCK |
+			      SPI_NOR_SWP_IS_VOLATILE)
+		MFR_FLAGS(SST_WRITE) },
 	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+			      SECT_4K | SPI_NOR_HAS_LOCK |
+			      SPI_NOR_SWP_IS_VOLATILE)
+		MFR_FLAGS(SST_WRITE) },
 	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+			      SECT_4K | SPI_NOR_HAS_LOCK |
+			      SPI_NOR_SWP_IS_VOLATILE)
+		MFR_FLAGS(SST_WRITE) },
 	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+			      SECT_4K | SPI_NOR_HAS_LOCK |
+			      SPI_NOR_SWP_IS_VOLATILE)
+		MFR_FLAGS(SST_WRITE) },
 	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128,
 			      SECT_4K | SPI_NOR_4BIT_BP | SPI_NOR_HAS_LOCK |
 			      SPI_NOR_SWP_IS_VOLATILE) },
 	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+			      SECT_4K | SPI_NOR_HAS_LOCK |
+			      SPI_NOR_SWP_IS_VOLATILE)
+		MFR_FLAGS(SST_WRITE) },
 	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+			      SECT_4K | SPI_NOR_HAS_LOCK |
+			      SPI_NOR_SWP_IS_VOLATILE)
+		MFR_FLAGS(SST_WRITE) },
 	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+			      SECT_4K | SPI_NOR_HAS_LOCK |
+			      SPI_NOR_SWP_IS_VOLATILE)
+		MFR_FLAGS(SST_WRITE) },
 	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4, SECT_4K | SPI_NOR_HAS_LOCK) },
 	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8, SECT_4K | SPI_NOR_HAS_LOCK) },
 	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+			      SECT_4K | SPI_NOR_HAS_LOCK |
+			      SPI_NOR_SWP_IS_VOLATILE)
+		MFR_FLAGS(SST_WRITE) },
 	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+			      SECT_4K | SPI_NOR_HAS_LOCK |
+			      SPI_NOR_SWP_IS_VOLATILE)
+		MFR_FLAGS(SST_WRITE) },
 	{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
 			      SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
@@ -179,7 +200,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 static void sst_late_init(struct spi_nor *nor)
 {
-	if (nor->info->flags & SST_WRITE)
+	if (nor->info->mfr_flags & SST_WRITE)
 		nor->mtd._write = sst_write;
 }
 
-- 
2.17.1

[PATCH linux dev-5.15 17/26] mtd: spi-nor: Rework the flash_info flags

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Clarify for what the flash_info flags are used for. Split them in
four categories and a bool:
1/ FLAGS: flags that indicate support that is not defined by the JESD216
   standard in its SFDP tables.
2/ NO_SFDP_FLAGS: these flags are used when the flash does not define the
   SFDP tables. These flags indicate support that can be discovered via
   SFDP. Used together with SPI_NOR_SKIP_SFDP flag.
3/ FIXUP_FLAGS: flags that indicate support that can be discovered
   via SFDP ideally, but can not be discovered for this particular flash
   because the SFDP table that indicates this support is not defined by
   the flash. In case the table for this support is defined but has wrong
   values, one should instead use a post_sfdp() hook to set the SNOR_F
   equivalent flag.
4/ MFR_FLAGS: manufacturer private flags. Used in the manufacturer
   fixup hooks to differentiate support between flashes of the same
   manufacturer.
5/ PARSE_SFDP: sets info->parse_sfdp to true. All flash_info entries
   that support SFDP should be converted to set info->parse_sfdp to true.

SPI NOR flashes that statically declare one of the
SPI_NOR_{DUAL, QUAD, OCTAL, OCTAL_DTR}_READ flags and do not support
the RDSFDP command are gratuiously receiving the RDSFDP command
in the attempt of parsing the SFDP tables. It is not desirable to issue
commands that are not supported, so introduce PARSE_SFDP to help on this
situation.

New flash additions/updates should be declared/updated to use either
PARSE_SFDP or SPI_NOR_SKIP_SFDP.  Once all the flash_info entries are
converted to use SPI_NOR_SKIP_SFDP or PARSE_SFDP, we can get rid of the
SPI_NOR_SKIP_SFDP flag and use just the bool nor->info->parse_sfdp to
determine whether to parse SFDP or not. SPI_NOR_SKIP_SFDP flag is kept
just as a way to differentiate whether a flash is converted to the new
flags logic or not.
Support that can be discovered when parsing SFDP should not be duplicated
by explicit flags at flash declaration. All the flash parameters will be
discovered when parsing SFDP. Sometimes manufacturers wrongly define some
fields in the SFDP tables. If that's the case, SFDP data can be amended
with the fixups() hooks. It is not common, but if the SFDP tables are
entirely wrong, and it does not worth the hassle to tweak the SFDP
parameters by using the fixups hooks, or if the flash does not define the
SFDP tables at all, then statically init the flash with the
SPI_NOR_SKIP_SFDP flag and specify the rest of flash capabilities with
the flash info flags.

With time, we want to convert all flashes to use PARSE_SFDP and
stop triggering the SFDP parsing with the
SPI_NOR_{DUAL, QUAD, OCTAL*}_READ flags. Getting rid of the
SPI_NOR_{OCTAL, OCTAL_DTR}_READ trigger is easily achievable,
the rest are a long term goal.

Manufacturer specific flags like USE_CLSR, USE_FSR, SPI_NOR_XSR_RDY,
will be removed in a future series.

No functional changes intended in this patch.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211207140254.87681-7-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/atmel.c      |  71 ++++++-----
 drivers/mtd/spi-nor/catalyst.c   |  15 +--
 drivers/mtd/spi-nor/core.c       |  52 ++++----
 drivers/mtd/spi-nor/core.h       | 204 +++++++++++++++++-------------
 drivers/mtd/spi-nor/eon.c        |  33 ++---
 drivers/mtd/spi-nor/esmt.c       |  15 ++-
 drivers/mtd/spi-nor/everspin.c   |  12 +-
 drivers/mtd/spi-nor/fujitsu.c    |   3 +-
 drivers/mtd/spi-nor/gigadevice.c |  57 +++++----
 drivers/mtd/spi-nor/intel.c      |  12 +-
 drivers/mtd/spi-nor/issi.c       |  60 ++++-----
 drivers/mtd/spi-nor/macronix.c   | 105 +++++++++-------
 drivers/mtd/spi-nor/micron-st.c  | 210 ++++++++++++++++---------------
 drivers/mtd/spi-nor/spansion.c   | 157 ++++++++++++-----------
 drivers/mtd/spi-nor/sst.c        |  83 ++++++------
 drivers/mtd/spi-nor/winbond.c    | 168 ++++++++++++++-----------
 drivers/mtd/spi-nor/xmc.c        |  10 +-
 17 files changed, 699 insertions(+), 568 deletions(-)

diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index d0e7883b38e3..d6d889ce8876 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -157,39 +157,48 @@ static const struct spi_nor_fixups atmel_global_protection_fixups = {
 
 static const struct flash_info atmel_parts[] = {
 	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
-	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K | SPI_NOR_HAS_LOCK)
+	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K)
 		.fixups = &atmel_at25fs_fixups },
-	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K | SPI_NOR_HAS_LOCK)
+	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K)
 		.fixups = &atmel_at25fs_fixups },
-
-	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8,
-			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-			.fixups = &atmel_global_protection_fixups },
-	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64,
-			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-			.fixups = &atmel_global_protection_fixups },
-	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64,
-			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-			.fixups = &atmel_global_protection_fixups },
-	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128,
-			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-			.fixups = &atmel_global_protection_fixups },
-
-	{ "at25sl321",	INFO(0x1f4216, 0, 64 * 1024, 64,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-
-	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
-	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16,
-			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-			.fixups = &atmel_global_protection_fixups },
-	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32,
-			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-			.fixups = &atmel_global_protection_fixups },
-	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64,
-			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
-			.fixups = &atmel_global_protection_fixups },
-
-	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
+	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_global_protection_fixups },
+	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_global_protection_fixups },
+	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_global_protection_fixups },
+	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_global_protection_fixups },
+	{ "at25sl321",	INFO(0x1f4216, 0, 64 * 1024, 64)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_global_protection_fixups },
+	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_global_protection_fixups },
+	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
+		.fixups = &atmel_global_protection_fixups },
+	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16)
+		NO_SFDP_FLAGS(SECT_4K) },
 };
 
 const struct spi_nor_manufacturer spi_nor_atmel = {
diff --git a/drivers/mtd/spi-nor/catalyst.c b/drivers/mtd/spi-nor/catalyst.c
index 011b83e99e95..ae4d67e01bb3 100644
--- a/drivers/mtd/spi-nor/catalyst.c
+++ b/drivers/mtd/spi-nor/catalyst.c
@@ -10,16 +10,11 @@
 
 static const struct flash_info catalyst_parts[] = {
 	/* Catalyst / On Semiconductor -- non-JEDEC */
-	{ "cat25c11", CAT25_INFO(16, 8, 16, 1,
-				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "cat25c03", CAT25_INFO(32, 8, 16, 2,
-				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "cat25c09", CAT25_INFO(128, 8, 32, 2,
-				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "cat25c17", CAT25_INFO(256, 8, 32, 2,
-				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "cat25128", CAT25_INFO(2048, 8, 64, 2,
-				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "cat25c11", CAT25_INFO(16, 8, 16, 1) },
+	{ "cat25c03", CAT25_INFO(32, 8, 16, 2) },
+	{ "cat25c09", CAT25_INFO(128, 8, 32, 2) },
+	{ "cat25c17", CAT25_INFO(256, 8, 32, 2) },
+	{ "cat25128", CAT25_INFO(2048, 8, 64, 2) },
 };
 
 const struct spi_nor_manufacturer spi_nor_catalyst = {
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 115261f0e904..25e2b4889093 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2540,6 +2540,7 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
 	struct spi_nor_erase_map *map = &params->erase_map;
 	const struct flash_info *info = nor->info;
 	struct device_node *np = spi_nor_get_flash_node(nor);
+	const u8 no_sfdp_flags = info->no_sfdp_flags;
 	u8 i, erase_mask;
 
 	/* Initialize default flash parameters and settings. */
@@ -2576,28 +2577,28 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
 					  0, 8, SPINOR_OP_READ_FAST,
 					  SNOR_PROTO_1_1_1);
 
-	if (info->flags & SPI_NOR_DUAL_READ) {
+	if (no_sfdp_flags & SPI_NOR_DUAL_READ) {
 		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
 		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_2],
 					  0, 8, SPINOR_OP_READ_1_1_2,
 					  SNOR_PROTO_1_1_2);
 	}
 
-	if (info->flags & SPI_NOR_QUAD_READ) {
+	if (no_sfdp_flags & SPI_NOR_QUAD_READ) {
 		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
 		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_4],
 					  0, 8, SPINOR_OP_READ_1_1_4,
 					  SNOR_PROTO_1_1_4);
 	}
 
-	if (info->flags & SPI_NOR_OCTAL_READ) {
+	if (no_sfdp_flags & SPI_NOR_OCTAL_READ) {
 		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
 		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_8],
 					  0, 8, SPINOR_OP_READ_1_1_8,
 					  SNOR_PROTO_1_1_8);
 	}
 
-	if (info->flags & SPI_NOR_OCTAL_DTR_READ) {
+	if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_READ) {
 		params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR;
 		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_8_8_8_DTR],
 					  0, 20, SPINOR_OP_READ_FAST,
@@ -2609,7 +2610,7 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
 	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
 				SPINOR_OP_PP, SNOR_PROTO_1_1_1);
 
-	if (info->flags & SPI_NOR_OCTAL_DTR_PP) {
+	if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_PP) {
 		params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8_DTR;
 		/*
 		 * Since xSPI Page Program opcode is backward compatible with
@@ -2625,12 +2626,12 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
 	 */
 	erase_mask = 0;
 	i = 0;
-	if (info->flags & SECT_4K_PMC) {
+	if (no_sfdp_flags & SECT_4K_PMC) {
 		erase_mask |= BIT(i);
 		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
 				       SPINOR_OP_BE_4K_PMC);
 		i++;
-	} else if (info->flags & SECT_4K) {
+	} else if (no_sfdp_flags & SECT_4K) {
 		erase_mask |= BIT(i);
 		spi_nor_set_erase_type(&map->erase_type[i], 4096u,
 				       SPINOR_OP_BE_4K);
@@ -2712,9 +2713,12 @@ static int spi_nor_init_params(struct spi_nor *nor)
 
 	spi_nor_manufacturer_init_params(nor);
 
-	if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-				 SPI_NOR_OCTAL_READ | SPI_NOR_OCTAL_DTR_READ)) &&
-	    !(nor->info->flags & SPI_NOR_SKIP_SFDP))
+	if ((nor->info->parse_sfdp ||
+	     (nor->info->no_sfdp_flags & (SPI_NOR_DUAL_READ |
+					  SPI_NOR_QUAD_READ |
+					  SPI_NOR_OCTAL_READ |
+					  SPI_NOR_OCTAL_DTR_READ))) &&
+	    !(nor->info->no_sfdp_flags & SPI_NOR_SKIP_SFDP))
 		spi_nor_sfdp_init_params(nor);
 
 	spi_nor_late_init_params(nor);
@@ -3093,6 +3097,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	struct device_node *np = spi_nor_get_flash_node(nor);
 	int ret;
 	int i;
+	u16 flags;
+	u8 fixup_flags;
 
 	ret = spi_nor_check(nor);
 	if (ret)
@@ -3122,6 +3128,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 		return PTR_ERR(info);
 
 	nor->info = info;
+	flags = info->flags;
 
 	spi_nor_debugfs_init(nor, info);
 
@@ -3132,10 +3139,10 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	 * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
 	 * with Atmel SPI NOR.
 	 */
-	if (info->flags & SPI_NOR_XSR_RDY)
+	if (flags & SPI_NOR_XSR_RDY)
 		nor->flags |=  SNOR_F_READY_XSR_RDY;
 
-	if (info->flags & SPI_NOR_HAS_LOCK)
+	if (flags & SPI_NOR_HAS_LOCK)
 		nor->flags |= SNOR_F_HAS_LOCK;
 
 	/* Init flash parameters based on flash_info struct and SFDP */
@@ -3143,24 +3150,24 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	if (ret)
 		return ret;
 
-	if (info->flags & USE_FSR)
+	if (flags & USE_FSR)
 		nor->flags |= SNOR_F_USE_FSR;
-	if (info->flags & SPI_NOR_HAS_TB) {
+	if (flags & SPI_NOR_HAS_TB) {
 		nor->flags |= SNOR_F_HAS_SR_TB;
-		if (info->flags & SPI_NOR_TB_SR_BIT6)
+		if (flags & SPI_NOR_TB_SR_BIT6)
 			nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
 	}
 
-	if (info->flags & NO_CHIP_ERASE)
+	if (flags & NO_CHIP_ERASE)
 		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
-	if (info->flags & USE_CLSR)
+	if (flags & USE_CLSR)
 		nor->flags |= SNOR_F_USE_CLSR;
-	if (info->flags & SPI_NOR_SWP_IS_VOLATILE)
+	if (flags & SPI_NOR_SWP_IS_VOLATILE)
 		nor->flags |= SNOR_F_SWP_IS_VOLATILE;
 
-	if (info->flags & SPI_NOR_4BIT_BP) {
+	if (flags & SPI_NOR_4BIT_BP) {
 		nor->flags |= SNOR_F_HAS_4BIT_BP;
-		if (info->flags & SPI_NOR_BP3_SR_BIT6)
+		if (flags & SPI_NOR_BP3_SR_BIT6)
 			nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
 	}
 
@@ -3177,10 +3184,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	if (ret)
 		return ret;
 
-	if (info->flags & SPI_NOR_4B_OPCODES)
+	fixup_flags = info->fixup_flags;
+	if (fixup_flags & SPI_NOR_4B_OPCODES)
 		nor->flags |= SNOR_F_4B_OPCODES;
 
-	if (info->flags & SPI_NOR_IO_MODE_EN_VOLATILE)
+	if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
 		nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
 
 	ret = spi_nor_set_addr_width(nor);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index a9fd956eed4e..2afb610853a9 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -313,92 +313,118 @@ struct spi_nor_fixups {
 	void (*late_init)(struct spi_nor *nor);
 };
 
+/**
+ * struct flash_info - SPI NOR flash_info entry.
+ * @name: the name of the flash.
+ * @id:             the flash's ID bytes. The first three bytes are the
+ *                  JEDIC ID. JEDEC ID zero means "no ID" (mostly older chips).
+ * @id_len:         the number of bytes of ID.
+ * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
+ *                  isn't necessarily called a "sector" by the vendor.
+ * @n_sectors:      the number of sectors.
+ * @page_size:      the flash's page size.
+ * @addr_width:     the flash's address width.
+ *
+ * @parse_sfdp:     true when flash supports SFDP tables. The false value has no
+ *                  meaning. If one wants to skip the SFDP tables, one should
+ *                  instead use the SPI_NOR_SKIP_SFDP sfdp_flag.
+ * @flags:          flags that indicate support that is not defined by the
+ *                  JESD216 standard in its SFDP tables. Flag meanings:
+ *   SPI_NOR_HAS_LOCK:        flash supports lock/unlock via SR
+ *   SPI_NOR_HAS_TB:          flash SR has Top/Bottom (TB) protect bit. Must be
+ *                            used with SPI_NOR_HAS_LOCK.
+ *   SPI_NOR_TB_SR_BIT6:      Top/Bottom (TB) is bit 6 of status register.
+ *                            Must be used with SPI_NOR_HAS_TB.
+ *   SPI_NOR_4BIT_BP:         flash SR has 4 bit fields (BP0-3) for block
+ *                            protection.
+ *   SPI_NOR_BP3_SR_BIT6:     BP3 is bit 6 of status register. Must be used with
+ *                            SPI_NOR_4BIT_BP.
+ *   SPI_NOR_SWP_IS_VOLATILE: flash has volatile software write protection bits.
+ *                            Usually these will power-up in a write-protected
+ *                            state.
+ *   SPI_NOR_NO_ERASE:        no erase command needed.
+ *   NO_CHIP_ERASE:           chip does not support chip erase.
+ *   SPI_NOR_NO_FR:           can't do fastread.
+ *   USE_CLSR:                use CLSR command.
+ *   USE_FSR:                 use flag status register
+ *   SPI_NOR_XSR_RDY:         S3AN flashes have specific opcode to read the
+ *                            status register.
+ *
+ * @no_sfdp_flags:  flags that indicate support that can be discovered via SFDP.
+ *                  Used when SFDP tables are not defined in the flash. These
+ *                  flags are used together with the SPI_NOR_SKIP_SFDP flag.
+ *   SPI_NOR_SKIP_SFDP:       skip parsing of SFDP tables.
+ *   SECT_4K:                 SPINOR_OP_BE_4K works uniformly.
+ *   SECT_4K_PMC:             SPINOR_OP_BE_4K_PMC works uniformly.
+ *   SPI_NOR_DUAL_READ:       flash supports Dual Read.
+ *   SPI_NOR_QUAD_READ:       flash supports Quad Read.
+ *   SPI_NOR_OCTAL_READ:      flash supports Octal Read.
+ *   SPI_NOR_OCTAL_DTR_READ:  flash supports octal DTR Read.
+ *   SPI_NOR_OCTAL_DTR_PP:    flash supports Octal DTR Page Program.
+ *
+ * @fixup_flags:    flags that indicate support that can be discovered via SFDP
+ *                  ideally, but can not be discovered for this particular flash
+ *                  because the SFDP table that indicates this support is not
+ *                  defined by the flash. In case the table for this support is
+ *                  defined but has wrong values, one should instead use a
+ *                  post_sfdp() hook to set the SNOR_F equivalent flag.
+ *
+ *   SPI_NOR_4B_OPCODES:      use dedicated 4byte address op codes to support
+ *                            memory size above 128Mib.
+ *   SPI_NOR_IO_MODE_EN_VOLATILE: flash enables the best available I/O mode
+ *                            via a volatile bit.
+ * @mfr_flags:      manufacturer private flags. Used in the manufacturer fixup
+ *                  hooks to differentiate support between flashes of the same
+ *                  manufacturer.
+ * @otp_org:        flash's OTP organization.
+ * @fixups:         part specific fixup hooks.
+ */
 struct flash_info {
-	char		*name;
-
-	/*
-	 * This array stores the ID bytes.
-	 * The first three bytes are the JEDIC ID.
-	 * JEDEC ID zero means "no ID" (mostly older chips).
-	 */
-	u8		id[SPI_NOR_MAX_ID_LEN];
-	u8		id_len;
-
-	/* The size listed here is what works with SPINOR_OP_SE, which isn't
-	 * necessarily called a "sector" by the vendor.
-	 */
-	unsigned	sector_size;
-	u16		n_sectors;
-
-	u16		page_size;
-	u16		addr_width;
-
-	u32		flags;
-#define SECT_4K			BIT(0)	/* SPINOR_OP_BE_4K works uniformly */
-#define SPI_NOR_NO_ERASE	BIT(1)	/* No erase command needed */
-#define SPI_NOR_NO_FR		BIT(3)	/* Can't do fastread */
-#define SECT_4K_PMC		BIT(4)	/* SPINOR_OP_BE_4K_PMC works uniformly */
-#define SPI_NOR_DUAL_READ	BIT(5)	/* Flash supports Dual Read */
-#define SPI_NOR_QUAD_READ	BIT(6)	/* Flash supports Quad Read */
-#define USE_FSR			BIT(7)	/* use flag status register */
-#define SPI_NOR_HAS_LOCK	BIT(8)	/* Flash supports lock/unlock via SR */
-#define SPI_NOR_HAS_TB		BIT(9)	/*
-					 * Flash SR has Top/Bottom (TB) protect
-					 * bit. Must be used with
-					 * SPI_NOR_HAS_LOCK.
-					 */
-#define SPI_NOR_XSR_RDY		BIT(10)	/*
-					 * S3AN flashes have specific opcode to
-					 * read the status register.
-					 */
-#define SPI_NOR_4B_OPCODES	BIT(11)	/*
-					 * Use dedicated 4byte address op codes
-					 * to support memory size above 128Mib.
-					 */
-#define NO_CHIP_ERASE		BIT(12) /* Chip does not support chip erase */
-#define SPI_NOR_SKIP_SFDP	BIT(13)	/* Skip parsing of SFDP tables */
-#define USE_CLSR		BIT(14)	/* use CLSR command */
-#define SPI_NOR_OCTAL_READ	BIT(15)	/* Flash supports Octal Read */
-#define SPI_NOR_TB_SR_BIT6	BIT(16)	/*
-					 * Top/Bottom (TB) is bit 6 of
-					 * status register. Must be used with
-					 * SPI_NOR_HAS_TB.
-					 */
-#define SPI_NOR_4BIT_BP		BIT(17) /*
-					 * Flash SR has 4 bit fields (BP0-3)
-					 * for block protection.
-					 */
-#define SPI_NOR_BP3_SR_BIT6	BIT(18) /*
-					 * BP3 is bit 6 of status register.
-					 * Must be used with SPI_NOR_4BIT_BP.
-					 */
-#define SPI_NOR_OCTAL_DTR_READ	BIT(19) /* Flash supports octal DTR Read. */
-#define SPI_NOR_OCTAL_DTR_PP	BIT(20) /* Flash supports Octal DTR Page Program */
-#define SPI_NOR_IO_MODE_EN_VOLATILE	BIT(21) /*
-						 * Flash enables the best
-						 * available I/O mode via a
-						 * volatile bit.
-						 */
-#define SPI_NOR_SWP_IS_VOLATILE	BIT(22)	/*
-					 * Flash has volatile software write
-					 * protection bits. Usually these will
-					 * power-up in a write-protected state.
-					 */
-	u8 mfr_flags;			/*
-					 * Manufacturer private flags. Used in
-					 * the manufacturer fixup hooks to
-					 * differentiate support between flashes
-					 * of the same manufacturer.
-					 */
+	char *name;
+	u8 id[SPI_NOR_MAX_ID_LEN];
+	u8 id_len;
+	unsigned sector_size;
+	u16 n_sectors;
+	u16 page_size;
+	u16 addr_width;
+
+	bool parse_sfdp;
+	u16 flags;
+#define SPI_NOR_HAS_LOCK		BIT(0)
+#define SPI_NOR_HAS_TB			BIT(1)
+#define SPI_NOR_TB_SR_BIT6		BIT(2)
+#define SPI_NOR_4BIT_BP			BIT(3)
+#define SPI_NOR_BP3_SR_BIT6		BIT(4)
+#define SPI_NOR_SWP_IS_VOLATILE		BIT(5)
+#define SPI_NOR_NO_ERASE		BIT(6)
+#define NO_CHIP_ERASE			BIT(7)
+#define SPI_NOR_NO_FR			BIT(8)
+#define USE_CLSR			BIT(9)
+#define USE_FSR				BIT(10)
+#define SPI_NOR_XSR_RDY			BIT(11)
+
+	u8 no_sfdp_flags;
+#define SPI_NOR_SKIP_SFDP		BIT(0)
+#define SECT_4K				BIT(1)
+#define SECT_4K_PMC			BIT(2)
+#define SPI_NOR_DUAL_READ		BIT(3)
+#define SPI_NOR_QUAD_READ		BIT(4)
+#define SPI_NOR_OCTAL_READ		BIT(5)
+#define SPI_NOR_OCTAL_DTR_READ		BIT(6)
+#define SPI_NOR_OCTAL_DTR_PP		BIT(7)
+
+	u8 fixup_flags;
+#define SPI_NOR_4B_OPCODES		BIT(0)
+#define SPI_NOR_IO_MODE_EN_VOLATILE	BIT(1)
+
+	u8 mfr_flags;
 
 	const struct spi_nor_otp_organization otp_org;
-
-	/* Part specific fixup hooks. */
 	const struct spi_nor_fixups *fixups;
 };
 
 /* Used when the "_ext_id" is two bytes at most */
-#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
 		.id = {							\
 			((_jedec_id) >> 16) & 0xff,			\
 			((_jedec_id) >> 8) & 0xff,			\
@@ -410,9 +436,8 @@ struct flash_info {
 		.sector_size = (_sector_size),				\
 		.n_sectors = (_n_sectors),				\
 		.page_size = 256,					\
-		.flags = (_flags),
 
-#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
 		.id = {							\
 			((_jedec_id) >> 16) & 0xff,			\
 			((_jedec_id) >> 8) & 0xff,			\
@@ -425,14 +450,13 @@ struct flash_info {
 		.sector_size = (_sector_size),				\
 		.n_sectors = (_n_sectors),				\
 		.page_size = 256,					\
-		.flags = (_flags),
 
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)	\
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width)	\
 		.sector_size = (_sector_size),				\
 		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
 		.addr_width = (_addr_width),				\
-		.flags = (_flags),
+		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
 
 #define S3AN_INFO(_jedec_id, _n_sectors, _page_size)			\
 		.id = {							\
@@ -455,6 +479,18 @@ struct flash_info {
 			.n_regions = (_n_regions),			\
 		},
 
+#define PARSE_SFDP							\
+	.parse_sfdp = true,						\
+
+#define FLAGS(_flags)							\
+		.flags = (_flags),					\
+
+#define NO_SFDP_FLAGS(_no_sfdp_flags)					\
+		.no_sfdp_flags = (_no_sfdp_flags),			\
+
+#define FIXUP_FLAGS(_fixup_flags)					\
+		.fixup_flags = (_fixup_flags),				\
+
 #define MFR_FLAGS(_mfr_flags)						\
 		.mfr_flags = (_mfr_flags),				\
 
diff --git a/drivers/mtd/spi-nor/eon.c b/drivers/mtd/spi-nor/eon.c
index ddb8e3650835..4f3ee6331f37 100644
--- a/drivers/mtd/spi-nor/eon.c
+++ b/drivers/mtd/spi-nor/eon.c
@@ -10,21 +10,24 @@
 
 static const struct flash_info eon_parts[] = {
 	/* EON -- en25xxx */
-	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64, SECT_4K) },
-	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64, 0) },
-	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
-	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
-	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
-	{ "en25q80a",   INFO(0x1c3014, 0, 64 * 1024,   16,
-			     SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "en25qh16",   INFO(0x1c7015, 0, 64 * 1024,   32,
-			     SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64, 0) },
-	{ "en25qh64",   INFO(0x1c7017, 0, 64 * 1024,  128,
-			     SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
-	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
-	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },
+	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64) },
+	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64) },
+	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128) },
+	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "en25q80a",   INFO(0x1c3014, 0, 64 * 1024,   16)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "en25qh16",   INFO(0x1c7015, 0, 64 * 1024,   32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64) },
+	{ "en25qh64",   INFO(0x1c7017, 0, 64 * 1024,  128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256) },
+	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512) },
+	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128)
+		NO_SFDP_FLAGS(SECT_4K) },
 };
 
 const struct spi_nor_manufacturer spi_nor_eon = {
diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c
index cfc9218c1053..ace1da221566 100644
--- a/drivers/mtd/spi-nor/esmt.c
+++ b/drivers/mtd/spi-nor/esmt.c
@@ -10,12 +10,15 @@
 
 static const struct flash_info esmt_parts[] = {
 	/* ESMT */
-	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64,
-			   SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
-	{ "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64,
-			   SECT_4K | SPI_NOR_HAS_LOCK) },
-	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128,
-			   SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K) },
 };
 
 const struct spi_nor_manufacturer spi_nor_esmt = {
diff --git a/drivers/mtd/spi-nor/everspin.c b/drivers/mtd/spi-nor/everspin.c
index 04a177a32283..f6c6fb36a428 100644
--- a/drivers/mtd/spi-nor/everspin.c
+++ b/drivers/mtd/spi-nor/everspin.c
@@ -10,14 +10,10 @@
 
 static const struct flash_info everspin_parts[] = {
 	/* Everspin */
-	{ "mr25h128", CAT25_INFO(16 * 1024, 1, 256, 2,
-				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "mr25h256", CAT25_INFO(32 * 1024, 1, 256, 2,
-				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3,
-				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-	{ "mr25h40",  CAT25_INFO(512 * 1024, 1, 256, 3,
-				 SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+	{ "mr25h128", CAT25_INFO(16 * 1024, 1, 256, 2) },
+	{ "mr25h256", CAT25_INFO(32 * 1024, 1, 256, 2) },
+	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3) },
+	{ "mr25h40",  CAT25_INFO(512 * 1024, 1, 256, 3) },
 };
 
 const struct spi_nor_manufacturer spi_nor_everspin = {
diff --git a/drivers/mtd/spi-nor/fujitsu.c b/drivers/mtd/spi-nor/fujitsu.c
index e385d93e756c..5fa8f04f2e35 100644
--- a/drivers/mtd/spi-nor/fujitsu.c
+++ b/drivers/mtd/spi-nor/fujitsu.c
@@ -10,7 +10,8 @@
 
 static const struct flash_info fujitsu_parts[] = {
 	/* Fujitsu */
-	{ "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
+	{ "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1)
+		FLAGS(SPI_NOR_NO_ERASE) },
 };
 
 const struct spi_nor_manufacturer spi_nor_fujitsu = {
diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
index 447d84bb2128..0c32e029b975 100644
--- a/drivers/mtd/spi-nor/gigadevice.c
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -24,31 +24,38 @@ static struct spi_nor_fixups gd25q256_fixups = {
 };
 
 static const struct flash_info gigadevice_parts[] = {
-	{ "gd25q16", INFO(0xc84015, 0, 64 * 1024,  32,
-			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			  SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64,
-			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			  SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64,
-			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128,
-			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			  SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128,
-			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			     SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256,
-			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
-			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			   SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK |
-			   SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
+	{ "gd25q16", INFO(0xc84015, 0, 64 * 1024,  32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
 		.fixups = &gd25q256_fixups },
 };
 
diff --git a/drivers/mtd/spi-nor/intel.c b/drivers/mtd/spi-nor/intel.c
index 8ece9cceb3cf..d64e114e9fb4 100644
--- a/drivers/mtd/spi-nor/intel.c
+++ b/drivers/mtd/spi-nor/intel.c
@@ -10,12 +10,12 @@
 
 static const struct flash_info intel_parts[] = {
 	/* Intel/Numonyx -- xxxs33b */
-	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32,
-			   SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
-	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64,
-			   SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
-	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128,
-			   SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 };
 
 const struct spi_nor_manufacturer spi_nor_intel = {
diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 1e5bb5408b68..6707fcfda055 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -31,38 +31,42 @@ static struct spi_nor_fixups is25lp256_fixups = {
 
 static const struct flash_info issi_parts[] = {
 	/* ISSI */
-	{ "is25cd512",  INFO(0x7f9d20, 0, 32 * 1024,   2, SECT_4K) },
-	{ "is25lq040b", INFO(0x9d4013, 0, 64 * 1024,   8,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25lp016d", INFO(0x9d6015, 0, 64 * 1024,  32,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25lp080d", INFO(0x9d6014, 0, 64 * 1024,  16,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25lp032",  INFO(0x9d6016, 0, 64 * 1024,  64,
-			     SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "is25lp064",  INFO(0x9d6017, 0, 64 * 1024, 128,
-			     SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "is25lp128",  INFO(0x9d6018, 0, 64 * 1024, 256,
-			     SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "is25lp256",  INFO(0x9d6019, 0, 64 * 1024, 512,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			     SPI_NOR_4B_OPCODES)
+	{ "is25cd512",  INFO(0x7f9d20, 0, 32 * 1024,   2)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "is25lq040b", INFO(0x9d4013, 0, 64 * 1024,   8)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25lp016d", INFO(0x9d6015, 0, 64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25lp080d", INFO(0x9d6014, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25lp032",  INFO(0x9d6016, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "is25lp064",  INFO(0x9d6017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "is25lp128",  INFO(0x9d6018, 0, 64 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "is25lp256",  INFO(0x9d6019, 0, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
 		.fixups = &is25lp256_fixups },
-	{ "is25wp032",  INFO(0x9d7016, 0, 64 * 1024,  64,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25wp064",  INFO(0x9d7017, 0, 64 * 1024, 128,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512,
-			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			    SPI_NOR_4B_OPCODES)
+	{ "is25wp032",  INFO(0x9d7016, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25wp064",  INFO(0x9d7017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25wp128",  INFO(0x9d7018, 0, 64 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
 		.fixups = &is25lp256_fixups },
 
 	/* PMC */
-	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
-	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4, SECT_4K_PMC) },
-	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64, SECT_4K) },
+	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2)
+		NO_SFDP_FLAGS(SECT_4K_PMC) },
+	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4)
+		NO_SFDP_FLAGS(SECT_4K_PMC) },
+	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64)
+		NO_SFDP_FLAGS(SECT_4K) },
 };
 
 static void issi_default_init(struct spi_nor *nor)
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index 27498ed0cc0d..67aaa83038b6 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -34,59 +34,72 @@ static struct spi_nor_fixups mx25l25635_fixups = {
 
 static const struct flash_info macronix_parts[] = {
 	/* Macronix */
-	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
-	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
-	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
-	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
-	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
-	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
-	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
-	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
-	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
-	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024,  64,
-			      SECT_4K | SPI_NOR_DUAL_READ |
+	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16) },
+	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
-	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
-	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
-	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, SECT_4K |
-			      SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP) },
-	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-	{ "mx25r1635f",  INFO(0xc22815, 0, 64 * 1024,  32,
-			      SECT_4K | SPI_NOR_DUAL_READ |
+	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256) },
+	{ "mx25r1635f",  INFO(0xc22815, 0, 64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-	{ "mx25r3235f",  INFO(0xc22816, 0, 64 * 1024,  64,
-			      SECT_4K | SPI_NOR_DUAL_READ |
+	{ "mx25r3235f",  INFO(0xc22816, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-	{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
-			      SECT_4K | SPI_NOR_DUAL_READ |
+	{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
 		.fixups = &mx25l25635_fixups },
-	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512,
-			      SECT_4K | SPI_NOR_4B_OPCODES) },
-	{ "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024,
-			      SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16,
-			      SECT_4K | SPI_NOR_DUAL_READ |
+	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "mx25v8035f",  INFO(0xc22314, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
-	{ "mx66l51235f", INFO(0xc2201a, 0, 64 * 1024, 1024,
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			      SPI_NOR_4B_OPCODES) },
-	{ "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024,
-			      SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048,
-			      SECT_4K | SPI_NOR_DUAL_READ |
+	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512) },
+	{ "mx66l51235f", INFO(0xc2201a, 0, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048,
-			      SPI_NOR_QUAD_READ) },
-	{ "mx66u2g45g",	 INFO(0xc2253c, 0, 64 * 1024, 4096,
-			      SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048)
+		NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+	{ "mx66u2g45g",	 INFO(0xc2253c, 0, 64 * 1024, 4096)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
 };
 
 static void macronix_default_init(struct spi_nor *nor)
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index f3d19b716b7b..2f3054b2f0b2 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -119,110 +119,122 @@ static struct spi_nor_fixups mt35xu512aba_fixups = {
 };
 
 static const struct flash_info micron_parts[] = {
-	{ "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512,
-			       SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
-			       SPI_NOR_4B_OPCODES | SPI_NOR_OCTAL_DTR_READ |
-			       SPI_NOR_OCTAL_DTR_PP |
-			       SPI_NOR_IO_MODE_EN_VOLATILE)
-	  .fixups = &mt35xu512aba_fixups},
-	{ "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048,
-			    SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
-			    SPI_NOR_4B_OPCODES) },
+	{ "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512)
+		FLAGS(USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ |
+			   SPI_NOR_OCTAL_DTR_READ | SPI_NOR_OCTAL_DTR_PP)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES | SPI_NOR_IO_MODE_EN_VOLATILE)
+		.fixups = &mt35xu512aba_fixups},
+	{ "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048)
+		FLAGS(USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
 };
 
 static const struct flash_info st_parts[] = {
-	{ "n25q016a",	 INFO(0x20bb15, 0, 64 * 1024,   32,
-			      SECT_4K | SPI_NOR_QUAD_READ) },
-	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64,
+	{ "n25q016a",	 INFO(0x20bb15, 0, 64 * 1024,   32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64)
+		NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+	{ "n25q032a",	 INFO(0x20bb16, 0, 64 * 1024,   64)
+		NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) },
+	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6 | USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6 | USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "mt25ql256a",  INFO6(0x20ba19, 0x104400, 64 * 1024,  512)
+		FLAGS(USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512)
+		FLAGS(USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-	{ "n25q032a",	 INFO(0x20bb16, 0, 64 * 1024,   64,
+	{ "mt25qu256a",  INFO6(0x20bb19, 0x104400, 64 * 1024,  512)
+		FLAGS(USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512)
+		FLAGS(USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "mt25ql512a",  INFO6(0x20ba20, 0x104400, 64 * 1024, 1024)
+		FLAGS(USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6 | USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "mt25qu512a",  INFO6(0x20bb20, 0x104400, 64 * 1024, 1024)
+		FLAGS(USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6 | USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP |
+		      SPI_NOR_BP3_SR_BIT6 | NO_CHIP_ERASE | USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048)
+		FLAGS(NO_CHIP_ERASE | USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "mt25ql02g",   INFO(0x20ba22, 0, 64 * 1024, 4096)
+		FLAGS(NO_CHIP_ERASE | USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) },
+	{ "mt25qu02g",   INFO(0x20bb22, 0, 64 * 1024, 4096)
+		FLAGS(NO_CHIP_ERASE | USE_FSR)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128,
-			      SECT_4K | SPI_NOR_QUAD_READ) },
-	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128,
-			      SECT_4K | SPI_NOR_QUAD_READ) },
-	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
-			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
-			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
-	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
-			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
-			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
-	{ "mt25ql256a",  INFO6(0x20ba19, 0x104400, 64 * 1024,  512,
-			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
-			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K |
-			      USE_FSR | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
-	{ "mt25qu256a",  INFO6(0x20bb19, 0x104400, 64 * 1024,  512,
-			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
-			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
-	{ "mt25ql512a",  INFO6(0x20ba20, 0x104400, 64 * 1024, 1024,
-			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
-			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
-			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
-			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
-	{ "mt25qu512a",  INFO6(0x20bb20, 0x104400, 64 * 1024, 1024,
-			       SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
-			       SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
-			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
-			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
-	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
-			      SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
-			      SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 |
-			      NO_CHIP_ERASE) },
-	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
-			      NO_CHIP_ERASE) },
-	{ "mt25ql02g",   INFO(0x20ba22, 0, 64 * 1024, 4096,
-			      SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
-			      NO_CHIP_ERASE) },
-	{ "mt25qu02g",   INFO(0x20bb22, 0, 64 * 1024, 4096,
-			      SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
-
-	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
-	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4, 0) },
-	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4, 0) },
-	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8, 0) },
-	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16, 0) },
-	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32, 0) },
-	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
-	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
-	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
-
-	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
-	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
-	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4, 0) },
-	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8, 0) },
-	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16, 0) },
-	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32, 0) },
-	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64, 0) },
-	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128, 0) },
-	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64, 0) },
-
-	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
-	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
-	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },
-
-	{ "m25pe20", INFO(0x208012,  0, 64 * 1024,  4,       0) },
-	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16,       0) },
-	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32, SECT_4K) },
-
-	{ "m25px16",    INFO(0x207115,  0, 64 * 1024, 32, SECT_4K) },
-	{ "m25px32",    INFO(0x207116,  0, 64 * 1024, 64, SECT_4K) },
-	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64, SECT_4K) },
-	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64, SECT_4K) },
-	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128, 0) },
-	{ "m25px80",    INFO(0x207114,  0, 64 * 1024, 16, 0) },
+
+	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2) },
+	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4) },
+	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4) },
+	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8) },
+	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16) },
+	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32) },
+	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64) },
+	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128) },
+	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64) },
+
+	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2) },
+	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4) },
+	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4) },
+	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8) },
+	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16) },
+	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32) },
+	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64) },
+	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128) },
+	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64) },
+
+	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2) },
+	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16) },
+	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32) },
+
+	{ "m25pe20", INFO(0x208012,  0, 64 * 1024,  4) },
+	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16) },
+	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32)
+		NO_SFDP_FLAGS(SECT_4K) },
+
+	{ "m25px16",    INFO(0x207115,  0, 64 * 1024, 32)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "m25px32",    INFO(0x207116,  0, 64 * 1024, 64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128) },
+	{ "m25px80",    INFO(0x207114,  0, 64 * 1024, 16) },
 };
 
 /**
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index a3ea0135f7b1..f2a2995a7718 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -198,81 +198,90 @@ static const struct flash_info spansion_parts[] = {
 	/* Spansion/Cypress -- single (large) sector size only, at least
 	 * for the chips listed here (without boot sectors).
 	 */
-	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64,
-			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128,
-			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64,
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			      USE_CLSR) },
-	{ "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			      USE_CLSR) },
-	{ "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128,
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			      USE_CLSR) },
-	{ "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512,
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			      USE_CLSR) },
-	{ "s25fl512s",  INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			      SPI_NOR_HAS_LOCK | USE_CLSR) },
-	{ "s25fs128s1", INFO6(0x012018, 0x4d0181, 64 * 1024, 256,
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
-	  .fixups = &s25fs_s_fixups, },
-	{ "s25fs256s0", INFO6(0x010219, 0x4d0081, 256 * 1024, 128,
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			      USE_CLSR) },
-	{ "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512,
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			      USE_CLSR) },
-	{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
-	  .fixups = &s25fs_s_fixups, },
-	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
-	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
-	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64,
-			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			     USE_CLSR) },
-	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256,
-			     SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			     USE_CLSR) },
-	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
-	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
-	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
-	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64, 0) },
-	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128, 0) },
-	{ "s25fl004k",  INFO(0xef4013,      0,  64 * 1024,   8,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl116k",  INFO(0x014015,      0,  64 * 1024,  32,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "s25fl132k",  INFO(0x014016,      0,  64 * 1024,  64, SECT_4K) },
-	{ "s25fl164k",  INFO(0x014017,      0,  64 * 1024, 128, SECT_4K) },
-	{ "s25fl204k",  INFO(0x014013,      0,  64 * 1024,   8,
-			     SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "s25fl208k",  INFO(0x014014,      0,  64 * 1024,  16,
-			     SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "s25fl064l",  INFO(0x016017,      0,  64 * 1024, 128,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			     SPI_NOR_4B_OPCODES) },
-	{ "s25fl128l",  INFO(0x016018,      0,  64 * 1024, 256,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			     SPI_NOR_4B_OPCODES) },
-	{ "s25fl256l",  INFO(0x016019,      0,  64 * 1024, 512,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			     SPI_NOR_4B_OPCODES) },
-	{ "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1,
-			      SPI_NOR_NO_ERASE) },
-	{ "s28hs512t",   INFO(0x345b1a,      0, 256 * 1024, 256,
-			     SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64)
+		FLAGS(USE_CLSR)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256)
+		FLAGS(USE_CLSR)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128)
+		FLAGS(USE_CLSR)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512)
+		FLAGS(USE_CLSR)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl512s",  INFO6(0x010220, 0x4d0080, 256 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | USE_CLSR)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fs128s1", INFO6(0x012018, 0x4d0181, 64 * 1024, 256)
+		FLAGS(USE_CLSR)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		.fixups = &s25fs_s_fixups, },
+	{ "s25fs256s0", INFO6(0x010219, 0x4d0081, 256 * 1024, 128)
+		FLAGS(USE_CLSR)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512)
+		FLAGS(USE_CLSR)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256)
+		FLAGS(USE_CLSR)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		.fixups = &s25fs_s_fixups, },
+	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64) },
+	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256) },
+	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64)
+		FLAGS(USE_CLSR)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256)
+		FLAGS(USE_CLSR)
+		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8) },
+	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16) },
+	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32) },
+	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64) },
+	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128) },
+	{ "s25fl004k",  INFO(0xef4013,      0,  64 * 1024,   8)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "s25fl116k",  INFO(0x014015,      0,  64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "s25fl132k",  INFO(0x014016,      0,  64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "s25fl164k",  INFO(0x014017,      0,  64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "s25fl204k",  INFO(0x014013,      0,  64 * 1024,   8)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "s25fl208k",  INFO(0x014014,      0,  64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "s25fl064l",  INFO(0x016017,      0,  64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "s25fl128l",  INFO(0x016018,      0,  64 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "s25fl256l",  INFO(0x016019,      0,  64 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
+	{ "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1)
+		FLAGS(SPI_NOR_NO_ERASE) },
+	{ "s28hs512t",   INFO(0x345b1a,      0, 256 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_DTR_READ |
 			      SPI_NOR_OCTAL_DTR_PP)
-	  .fixups = &s28hs512t_fixups,
+		.fixups = &s28hs512t_fixups,
 	},
 };
 
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 8f1ebb8fd05f..30183e9189b9 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -60,55 +60,60 @@ static const struct spi_nor_fixups sst26vf_fixups = {
 
 static const struct flash_info sst_parts[] = {
 	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
-	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8,
-			      SECT_4K | SPI_NOR_HAS_LOCK |
-			      SPI_NOR_SWP_IS_VOLATILE)
+	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
 		MFR_FLAGS(SST_WRITE) },
-	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
-			      SECT_4K | SPI_NOR_HAS_LOCK |
-			      SPI_NOR_SWP_IS_VOLATILE)
+	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
 		MFR_FLAGS(SST_WRITE) },
-	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
-			      SECT_4K | SPI_NOR_HAS_LOCK |
-			      SPI_NOR_SWP_IS_VOLATILE)
+	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
 		MFR_FLAGS(SST_WRITE) },
-	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
-			      SECT_4K | SPI_NOR_HAS_LOCK |
-			      SPI_NOR_SWP_IS_VOLATILE)
+	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
 		MFR_FLAGS(SST_WRITE) },
-	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128,
-			      SECT_4K | SPI_NOR_4BIT_BP | SPI_NOR_HAS_LOCK |
-			      SPI_NOR_SWP_IS_VOLATILE) },
-	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1,
-			      SECT_4K | SPI_NOR_HAS_LOCK |
-			      SPI_NOR_SWP_IS_VOLATILE)
+	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP |
+		      SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
 		MFR_FLAGS(SST_WRITE) },
-	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2,
-			      SECT_4K | SPI_NOR_HAS_LOCK |
-			      SPI_NOR_SWP_IS_VOLATILE)
+	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
 		MFR_FLAGS(SST_WRITE) },
-	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4,
-			      SECT_4K | SPI_NOR_HAS_LOCK |
-			      SPI_NOR_SWP_IS_VOLATILE)
+	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
 		MFR_FLAGS(SST_WRITE) },
-	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4, SECT_4K | SPI_NOR_HAS_LOCK) },
-	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8, SECT_4K | SPI_NOR_HAS_LOCK) },
-	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8,
-			      SECT_4K | SPI_NOR_HAS_LOCK |
-			      SPI_NOR_SWP_IS_VOLATILE)
+	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8)
+		FLAGS(SPI_NOR_HAS_LOCK)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
 		MFR_FLAGS(SST_WRITE) },
-	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16,
-			      SECT_4K | SPI_NOR_HAS_LOCK |
-			      SPI_NOR_SWP_IS_VOLATILE)
+	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K)
 		MFR_FLAGS(SST_WRITE) },
-	{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
-			      SECT_4K | SPI_NOR_DUAL_READ |
+	{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-	{ "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32,
-			      SECT_4K | SPI_NOR_DUAL_READ) },
-	{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128,
-			      SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			      SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+	{ "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
 		.fixups = &sst26vf_fixups },
 };
 
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index f0f73e1cc403..f5e723c2d482 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -34,76 +34,104 @@ static struct spi_nor_fixups w25q256_fixups = {
 
 static const struct flash_info winbond_parts[] = {
 	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
-	{ "w25x05", INFO(0xef3010, 0, 64 * 1024,  1,  SECT_4K) },
-	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
-	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4,  SECT_4K) },
-	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
-	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
-	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
-	{ "w25q16dw", INFO(0xef6015, 0, 64 * 1024,  32,
-			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
-	{ "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024,  32,
-				 SECT_4K | SPI_NOR_DUAL_READ |
-				 SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK |
-				 SPI_NOR_HAS_TB) },
-	{ "w25q20cl", INFO(0xef4012, 0, 64 * 1024,  4, SECT_4K) },
-	{ "w25q20bw", INFO(0xef5012, 0, 64 * 1024,  4, SECT_4K) },
-	{ "w25q20ew", INFO(0xef6012, 0, 64 * 1024,  4, SECT_4K) },
-	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
-	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64,
-			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-			   OTP_INFO(256, 3, 0x1000, 0x1000)
-	},
-
-	{ "w25q32jv", INFO(0xef7016, 0, 64 * 1024,  64,
-			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-	},
-	{ "w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64,
-			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-			    OTP_INFO(256, 3, 0x1000, 0x1000) },
-	{ "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128,
-			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "w25q128jwm", INFO(0xef8018, 0, 64 * 1024, 256,
-			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "w25q256jwm", INFO(0xef8019, 0, 64 * 1024, 512,
-			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
-	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128,
-			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
-			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "w25q64jvm", INFO(0xef7017, 0, 64 * 1024, 128, SECT_4K) },
-	{ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
-			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
-			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
-	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
-	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
-	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
-			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
-	  .fixups = &w25q256_fixups },
-	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "w25q512jv", INFO(0xef4020, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
-	{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
-			    SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
-	{ "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "w25x05", INFO(0xef3010, 0, 64 * 1024,  1)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q16dw", INFO(0xef6015, 0, 64 * 1024,  32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024,  32)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q20cl", INFO(0xef4012, 0, 64 * 1024,  4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q20bw", INFO(0xef5012, 0, 64 * 1024,  4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q20ew", INFO(0xef6012, 0, 64 * 1024,  4)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		OTP_INFO(256, 3, 0x1000, 0x1000) },
+	{ "w25q32jv", INFO(0xef7016, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		OTP_INFO(256, 3, 0x1000, 0x1000) },
+	{ "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q128jwm", INFO(0xef8018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q256jwm", INFO(0xef8019, 0, 64 * 1024, 512)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q64jvm", INFO(0xef7017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K) },
+	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		.fixups = &w25q256_fixups },
+	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "w25q512jv", INFO(0xef4020, 0, 64 * 1024, 1024)
+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ)},
+	{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ |
+			      SPI_NOR_DUAL_READ) },
+	{ "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
 };
 
 /**
diff --git a/drivers/mtd/spi-nor/xmc.c b/drivers/mtd/spi-nor/xmc.c
index 2c7773b68993..2992af03cb0a 100644
--- a/drivers/mtd/spi-nor/xmc.c
+++ b/drivers/mtd/spi-nor/xmc.c
@@ -10,10 +10,12 @@
 
 static const struct flash_info xmc_parts[] = {
 	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
-	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128,
-			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256,
-			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256)
+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
 };
 
 const struct spi_nor_manufacturer spi_nor_xmc = {
-- 
2.17.1

[PATCH linux dev-5.15 18/26] mtd: spi-nor: Introduce spi_nor_init_flags()

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Used to initialize the NOR flags for settings that are not defined
in the JESD216 SFDP standard, thus can not be retrieved when parsing
SFDP.
This moves the setting of SNOR_F_READY_XSR_RDY and SNOR_F_HAS_LOCK
late in the init call, without any functional change expected.
The rest of the flags were already set after the spi_nor_init_params().

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211207140254.87681-8-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.c | 89 ++++++++++++++++++++++----------------
 1 file changed, 51 insertions(+), 38 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 25e2b4889093..1ac7e8de4b8e 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2643,6 +2643,55 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
 	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
 }
 
+/**
+ * spi_nor_init_flags() - Initialize NOR flags for settings that are not defined
+ * in the JESD216 SFDP standard, thus can not be retrieved when parsing SFDP.
+ * @nor:	pointer to a 'struct spi_nor'
+ */
+static void spi_nor_init_flags(struct spi_nor *nor)
+{
+	struct device_node *np = spi_nor_get_flash_node(nor);
+	const u16 flags = nor->info->flags;
+
+	if (of_property_read_bool(np, "broken-flash-reset"))
+		nor->flags |= SNOR_F_BROKEN_RESET;
+
+	if (flags & SPI_NOR_SWP_IS_VOLATILE)
+		nor->flags |= SNOR_F_SWP_IS_VOLATILE;
+
+	if (flags & SPI_NOR_HAS_LOCK)
+		nor->flags |= SNOR_F_HAS_LOCK;
+
+	if (flags & SPI_NOR_HAS_TB) {
+		nor->flags |= SNOR_F_HAS_SR_TB;
+		if (flags & SPI_NOR_TB_SR_BIT6)
+			nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
+	}
+
+	if (flags & SPI_NOR_4BIT_BP) {
+		nor->flags |= SNOR_F_HAS_4BIT_BP;
+		if (flags & SPI_NOR_BP3_SR_BIT6)
+			nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
+	}
+
+	if (flags & NO_CHIP_ERASE)
+		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
+
+	if (flags & USE_CLSR)
+		nor->flags |= SNOR_F_USE_CLSR;
+
+	if (flags & USE_FSR)
+		nor->flags |= SNOR_F_USE_FSR;
+
+	/*
+	 * Make sure the XSR_RDY flag is set before calling
+	 * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
+	 * with Atmel SPI NOR.
+	 */
+	if (flags & SPI_NOR_XSR_RDY)
+		nor->flags |=  SNOR_F_READY_XSR_RDY;
+}
+
 /**
  * spi_nor_late_init_params() - Late initialization of default flash parameters.
  * @nor:	pointer to a 'struct spi_nor'
@@ -2660,6 +2709,8 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
 	if (nor->info->fixups && nor->info->fixups->late_init)
 		nor->info->fixups->late_init(nor);
 
+	spi_nor_init_flags(nor);
+
 	/*
 	 * NOR protection support. When locking_ops are not provided, we pick
 	 * the default ones.
@@ -3094,10 +3145,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	const struct flash_info *info;
 	struct device *dev = nor->dev;
 	struct mtd_info *mtd = &nor->mtd;
-	struct device_node *np = spi_nor_get_flash_node(nor);
 	int ret;
 	int i;
-	u16 flags;
 	u8 fixup_flags;
 
 	ret = spi_nor_check(nor);
@@ -3128,52 +3177,16 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 		return PTR_ERR(info);
 
 	nor->info = info;
-	flags = info->flags;
 
 	spi_nor_debugfs_init(nor, info);
 
 	mutex_init(&nor->lock);
 
-	/*
-	 * Make sure the XSR_RDY flag is set before calling
-	 * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
-	 * with Atmel SPI NOR.
-	 */
-	if (flags & SPI_NOR_XSR_RDY)
-		nor->flags |=  SNOR_F_READY_XSR_RDY;
-
-	if (flags & SPI_NOR_HAS_LOCK)
-		nor->flags |= SNOR_F_HAS_LOCK;
-
 	/* Init flash parameters based on flash_info struct and SFDP */
 	ret = spi_nor_init_params(nor);
 	if (ret)
 		return ret;
 
-	if (flags & USE_FSR)
-		nor->flags |= SNOR_F_USE_FSR;
-	if (flags & SPI_NOR_HAS_TB) {
-		nor->flags |= SNOR_F_HAS_SR_TB;
-		if (flags & SPI_NOR_TB_SR_BIT6)
-			nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
-	}
-
-	if (flags & NO_CHIP_ERASE)
-		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
-	if (flags & USE_CLSR)
-		nor->flags |= SNOR_F_USE_CLSR;
-	if (flags & SPI_NOR_SWP_IS_VOLATILE)
-		nor->flags |= SNOR_F_SWP_IS_VOLATILE;
-
-	if (flags & SPI_NOR_4BIT_BP) {
-		nor->flags |= SNOR_F_HAS_4BIT_BP;
-		if (flags & SPI_NOR_BP3_SR_BIT6)
-			nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
-	}
-
-	if (of_property_read_bool(np, "broken-flash-reset"))
-		nor->flags |= SNOR_F_BROKEN_RESET;
-
 	/*
 	 * Configure the SPI memory:
 	 * - select op codes for (Fast) Read, Page Program and Sector Erase.
-- 
2.17.1

[PATCH linux dev-5.15 19/26] mtd: spi-nor: Introduce spi_nor_init_fixup_flags()

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Group NOR flags initialization. Introduce a dedicated function for
setting the fixup_flags and emphasise when those flash_info flags
should be set: when the SNOR_F_4B_OPCODES/SNOR_F_IO_MODE_EN_VOLATILE
setttings can not be discovered by SFDP for this particular flash
because the SFDP table that indicates this support is not defined
in the flash.
In case the table for his support is defined but has wrong values,
one should instead use a post_sfdp() hook to set the SNOR_F equivalent
flag.

No functional change intended in this patch.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211207140254.87681-9-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 1ac7e8de4b8e..86bbd1ca22fc 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2692,6 +2692,25 @@ static void spi_nor_init_flags(struct spi_nor *nor)
 		nor->flags |=  SNOR_F_READY_XSR_RDY;
 }
 
+/**
+ * spi_nor_init_fixup_flags() - Initialize NOR flags for settings that can not
+ * be discovered by SFDP for this particular flash because the SFDP table that
+ * indicates this support is not defined in the flash. In case the table for
+ * this support is defined but has wrong values, one should instead use a
+ * post_sfdp() hook to set the SNOR_F equivalent flag.
+ * @nor:       pointer to a 'struct spi_nor'
+ */
+static void spi_nor_init_fixup_flags(struct spi_nor *nor)
+{
+	const u8 fixup_flags = nor->info->fixup_flags;
+
+	if (fixup_flags & SPI_NOR_4B_OPCODES)
+		nor->flags |= SNOR_F_4B_OPCODES;
+
+	if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
+		nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+}
+
 /**
  * spi_nor_late_init_params() - Late initialization of default flash parameters.
  * @nor:	pointer to a 'struct spi_nor'
@@ -2710,6 +2729,7 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
 		nor->info->fixups->late_init(nor);
 
 	spi_nor_init_flags(nor);
+	spi_nor_init_fixup_flags(nor);
 
 	/*
 	 * NOR protection support. When locking_ops are not provided, we pick
@@ -3147,7 +3167,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	struct mtd_info *mtd = &nor->mtd;
 	int ret;
 	int i;
-	u8 fixup_flags;
 
 	ret = spi_nor_check(nor);
 	if (ret)
@@ -3197,13 +3216,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	if (ret)
 		return ret;
 
-	fixup_flags = info->fixup_flags;
-	if (fixup_flags & SPI_NOR_4B_OPCODES)
-		nor->flags |= SNOR_F_4B_OPCODES;
-
-	if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
-		nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
-
 	ret = spi_nor_set_addr_width(nor);
 	if (ret)
 		return ret;
-- 
2.17.1

[PATCH linux dev-5.15 20/26] mtd: spi-nor: core: Init all flash parameters based on SFDP where possible

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

New flash additions that support SFDP should be declared with
PARSE_SFDP and with all the other flags that are not SFDP
discoverable.

Keep the old way of initializing the flash, until all the flashes
are converted to use either PARSE_SFDP or SPI_NOR_SKIP_SFDP.

Flashes that declare PARSE_SFDP do not have a roll-back mechanism
because if spi_nor_parse_sfdp() returns an error it means that either
BFPT is not supported, thus SFDP is not supported and the user didn't
correctly declared the flash_info entry, or some memalloc failed.
Either way we should return an error. The rest of the SFDP tables are
optional, if one of the optional SFDP tables fails, we just continue.
We would like to get rid of the default_init() hook, so the
spi_nor_manufacturer_init_params() is not called in the new sequnce
of flash initialization.

Split spi_nor_info_init_params() in spi_nor_init_default_params()
and spi_nor_no_sfdp_init_params(). spi_nor_init_default_params() is
called for all the flashes regardless if they support SFDP or not.
spi_nor_no_sfdp_init_params() is called just for the flashes that
do not define SFDP and initializes parameters and setting solely
based on flash_info data.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211207140254.87681-10-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.c | 197 ++++++++++++++++++++++---------------
 1 file changed, 119 insertions(+), 78 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 86bbd1ca22fc..c5a5844e98c5 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2509,74 +2509,21 @@ static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
 }
 
 /**
- * spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings
- * based on JESD216 SFDP standard.
- * @nor:	pointer to a 'struct spi_nor'.
- *
- * The method has a roll-back mechanism: in case the SFDP parsing fails, the
- * legacy flash parameters and settings will be restored.
- */
-static void spi_nor_sfdp_init_params(struct spi_nor *nor)
-{
-	struct spi_nor_flash_parameter sfdp_params;
-
-	memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
-
-	if (spi_nor_parse_sfdp(nor)) {
-		memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
-		nor->addr_width = 0;
-		nor->flags &= ~SNOR_F_4B_OPCODES;
-	}
-}
-
-/**
- * spi_nor_info_init_params() - Initialize the flash's parameters and settings
- * based on nor->info data.
+ * spi_nor_no_sfdp_init_params() - Initialize the flash's parameters and
+ * settings based on nor->info->sfdp_flags. This method should be called only by
+ * flashes that do not define SFDP tables. If the flash supports SFDP but the
+ * information is wrong and the settings from this function can not be retrieved
+ * by parsing SFDP, one should instead use the fixup hooks and update the wrong
+ * bits.
  * @nor:	pointer to a 'struct spi_nor'.
  */
-static void spi_nor_info_init_params(struct spi_nor *nor)
+static void spi_nor_no_sfdp_init_params(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter *params = nor->params;
 	struct spi_nor_erase_map *map = &params->erase_map;
-	const struct flash_info *info = nor->info;
-	struct device_node *np = spi_nor_get_flash_node(nor);
-	const u8 no_sfdp_flags = info->no_sfdp_flags;
+	const u8 no_sfdp_flags = nor->info->no_sfdp_flags;
 	u8 i, erase_mask;
 
-	/* Initialize default flash parameters and settings. */
-	params->quad_enable = spi_nor_sr2_bit1_quad_enable;
-	params->set_4byte_addr_mode = spansion_set_4byte_addr_mode;
-	params->setup = spi_nor_default_setup;
-	params->otp.org = &info->otp_org;
-
-	/* Default to 16-bit Write Status (01h) Command */
-	nor->flags |= SNOR_F_HAS_16BIT_SR;
-
-	/* Set SPI NOR sizes. */
-	params->writesize = 1;
-	params->size = (u64)info->sector_size * info->n_sectors;
-	params->page_size = info->page_size;
-
-	if (!(info->flags & SPI_NOR_NO_FR)) {
-		/* Default to Fast Read for DT and non-DT platform devices. */
-		params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
-
-		/* Mask out Fast Read if not requested at DT instantiation. */
-		if (np && !of_property_read_bool(np, "m25p,fast-read"))
-			params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
-	}
-
-	/* (Fast) Read settings. */
-	params->hwcaps.mask |= SNOR_HWCAPS_READ;
-	spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ],
-				  0, 0, SPINOR_OP_READ,
-				  SNOR_PROTO_1_1_1);
-
-	if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
-		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_FAST],
-					  0, 8, SPINOR_OP_READ_FAST,
-					  SNOR_PROTO_1_1_1);
-
 	if (no_sfdp_flags & SPI_NOR_DUAL_READ) {
 		params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
 		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_2],
@@ -2605,11 +2552,6 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
 					  SNOR_PROTO_8_8_8_DTR);
 	}
 
-	/* Page Program settings. */
-	params->hwcaps.mask |= SNOR_HWCAPS_PP;
-	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
-				SPINOR_OP_PP, SNOR_PROTO_1_1_1);
-
 	if (no_sfdp_flags & SPI_NOR_OCTAL_DTR_PP) {
 		params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8_DTR;
 		/*
@@ -2638,7 +2580,7 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
 		i++;
 	}
 	erase_mask |= BIT(i);
-	spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
+	spi_nor_set_erase_type(&map->erase_type[i], nor->info->sector_size,
 			       SPINOR_OP_SE);
 	spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
 }
@@ -2739,6 +2681,99 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
 		spi_nor_init_default_locking_ops(nor);
 }
 
+/**
+ * spi_nor_sfdp_init_params_deprecated() - Deprecated way of initializing flash
+ * parameters and settings based on JESD216 SFDP standard.
+ * @nor:	pointer to a 'struct spi_nor'.
+ *
+ * The method has a roll-back mechanism: in case the SFDP parsing fails, the
+ * legacy flash parameters and settings will be restored.
+ */
+static void spi_nor_sfdp_init_params_deprecated(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter sfdp_params;
+
+	memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
+
+	if (spi_nor_parse_sfdp(nor)) {
+		memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
+		nor->addr_width = 0;
+		nor->flags &= ~SNOR_F_4B_OPCODES;
+	}
+}
+
+/**
+ * spi_nor_init_params_deprecated() - Deprecated way of initializing flash
+ * parameters and settings.
+ * @nor:	pointer to a 'struct spi_nor'.
+ *
+ * The method assumes that flash doesn't support SFDP so it initializes flash
+ * parameters in spi_nor_no_sfdp_init_params() which later on can be overwritten
+ * when parsing SFDP, if supported.
+ */
+static void spi_nor_init_params_deprecated(struct spi_nor *nor)
+{
+	spi_nor_no_sfdp_init_params(nor);
+
+	spi_nor_manufacturer_init_params(nor);
+
+	if (nor->info->no_sfdp_flags & (SPI_NOR_DUAL_READ |
+					SPI_NOR_QUAD_READ |
+					SPI_NOR_OCTAL_READ |
+					SPI_NOR_OCTAL_DTR_READ))
+		spi_nor_sfdp_init_params_deprecated(nor);
+}
+
+/**
+ * spi_nor_init_default_params() - Default initialization of flash parameters
+ * and settings. Done for all flashes, regardless is they define SFDP tables
+ * or not.
+ * @nor:	pointer to a 'struct spi_nor'.
+ */
+static void spi_nor_init_default_params(struct spi_nor *nor)
+{
+	struct spi_nor_flash_parameter *params = nor->params;
+	const struct flash_info *info = nor->info;
+	struct device_node *np = spi_nor_get_flash_node(nor);
+
+	params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+	params->set_4byte_addr_mode = spansion_set_4byte_addr_mode;
+	params->setup = spi_nor_default_setup;
+	params->otp.org = &info->otp_org;
+
+	/* Default to 16-bit Write Status (01h) Command */
+	nor->flags |= SNOR_F_HAS_16BIT_SR;
+
+	/* Set SPI NOR sizes. */
+	params->writesize = 1;
+	params->size = (u64)info->sector_size * info->n_sectors;
+	params->page_size = info->page_size;
+
+	if (!(info->flags & SPI_NOR_NO_FR)) {
+		/* Default to Fast Read for DT and non-DT platform devices. */
+		params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
+
+		/* Mask out Fast Read if not requested at DT instantiation. */
+		if (np && !of_property_read_bool(np, "m25p,fast-read"))
+			params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
+	}
+
+	/* (Fast) Read settings. */
+	params->hwcaps.mask |= SNOR_HWCAPS_READ;
+	spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ],
+				  0, 0, SPINOR_OP_READ,
+				  SNOR_PROTO_1_1_1);
+
+	if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
+		spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_FAST],
+					  0, 8, SPINOR_OP_READ_FAST,
+					  SNOR_PROTO_1_1_1);
+	/* Page Program settings. */
+	params->hwcaps.mask |= SNOR_HWCAPS_PP;
+	spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
+				SPINOR_OP_PP, SNOR_PROTO_1_1_1);
+}
+
 /**
  * spi_nor_init_params() - Initialize the flash's parameters and settings.
  * @nor:	pointer to a 'struct spi_nor'.
@@ -2759,7 +2794,7 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
  * which can be overwritten by:
  * 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and
  *    should be more accurate that the above.
- *		spi_nor_sfdp_init_params()
+ *		spi_nor_parse_sfdp() or spi_nor_no_sfdp_init_params()
  *
  *    Please note that there is a ->post_bfpt() fixup hook that can overwrite
  *    the flash parameters and settings immediately after parsing the Basic
@@ -2773,24 +2808,30 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
  * parameters that are not declared in the JESD216 SFDP standard, or where SFDP
  * tables are not defined at all.
  *		spi_nor_late_init_params()
+ *
+ * Return: 0 on success, -errno otherwise.
  */
 static int spi_nor_init_params(struct spi_nor *nor)
 {
+	int ret;
+
 	nor->params = devm_kzalloc(nor->dev, sizeof(*nor->params), GFP_KERNEL);
 	if (!nor->params)
 		return -ENOMEM;
 
-	spi_nor_info_init_params(nor);
-
-	spi_nor_manufacturer_init_params(nor);
+	spi_nor_init_default_params(nor);
 
-	if ((nor->info->parse_sfdp ||
-	     (nor->info->no_sfdp_flags & (SPI_NOR_DUAL_READ |
-					  SPI_NOR_QUAD_READ |
-					  SPI_NOR_OCTAL_READ |
-					  SPI_NOR_OCTAL_DTR_READ))) &&
-	    !(nor->info->no_sfdp_flags & SPI_NOR_SKIP_SFDP))
-		spi_nor_sfdp_init_params(nor);
+	if (nor->info->parse_sfdp) {
+		ret = spi_nor_parse_sfdp(nor);
+		if (ret) {
+			dev_err(nor->dev, "BFPT parsing failed. Please consider using SPI_NOR_SKIP_SFDP when declaring the flash\n");
+			return ret;
+		}
+	} else if (nor->info->no_sfdp_flags & SPI_NOR_SKIP_SFDP) {
+		spi_nor_no_sfdp_init_params(nor);
+	} else {
+		spi_nor_init_params_deprecated(nor);
+	}
 
 	spi_nor_late_init_params(nor);
 
-- 
2.17.1

[PATCH linux dev-5.15 21/26] mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup()

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

spi_nor_setup() configures the SPI NOR memory. Setting the addr width
is too a configuration, hence we can move the spi_nor_set_addr_width()
in spi_nor_setup().

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20211207140254.87681-11-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/core.c | 102 +++++++++++++++++++------------------
 1 file changed, 52 insertions(+), 50 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index c5a5844e98c5..2e21d5ac0e2d 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2484,13 +2484,61 @@ static int spi_nor_default_setup(struct spi_nor *nor,
 	return 0;
 }
 
+static int spi_nor_set_addr_width(struct spi_nor *nor)
+{
+	if (nor->addr_width) {
+		/* already configured from SFDP */
+	} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
+		/*
+		 * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
+		 * in this protocol an odd address width cannot be used because
+		 * then the address phase would only span a cycle and a half.
+		 * Half a cycle would be left over. We would then have to start
+		 * the dummy phase in the middle of a cycle and so too the data
+		 * phase, and we will end the transaction with half a cycle left
+		 * over.
+		 *
+		 * Force all 8D-8D-8D flashes to use an address width of 4 to
+		 * avoid this situation.
+		 */
+		nor->addr_width = 4;
+	} else if (nor->info->addr_width) {
+		nor->addr_width = nor->info->addr_width;
+	} else {
+		nor->addr_width = 3;
+	}
+
+	if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
+		/* enable 4-byte addressing if the device exceeds 16MiB */
+		nor->addr_width = 4;
+	}
+
+	if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
+		dev_dbg(nor->dev, "address width is too large: %u\n",
+			nor->addr_width);
+		return -EINVAL;
+	}
+
+	/* Set 4byte opcodes when possible. */
+	if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
+	    !(nor->flags & SNOR_F_HAS_4BAIT))
+		spi_nor_set_4byte_opcodes(nor);
+
+	return 0;
+}
+
 static int spi_nor_setup(struct spi_nor *nor,
 			 const struct spi_nor_hwcaps *hwcaps)
 {
-	if (!nor->params->setup)
-		return 0;
+	int ret;
 
-	return nor->params->setup(nor, hwcaps);
+	if (nor->params->setup) {
+		ret = nor->params->setup(nor, hwcaps);
+		if (ret)
+			return ret;
+	}
+
+	return spi_nor_set_addr_width(nor);
 }
 
 /**
@@ -3078,49 +3126,6 @@ static const struct flash_info *spi_nor_match_id(struct spi_nor *nor,
 	return NULL;
 }
 
-static int spi_nor_set_addr_width(struct spi_nor *nor)
-{
-	if (nor->addr_width) {
-		/* already configured from SFDP */
-	} else if (nor->read_proto == SNOR_PROTO_8_8_8_DTR) {
-		/*
-		 * In 8D-8D-8D mode, one byte takes half a cycle to transfer. So
-		 * in this protocol an odd address width cannot be used because
-		 * then the address phase would only span a cycle and a half.
-		 * Half a cycle would be left over. We would then have to start
-		 * the dummy phase in the middle of a cycle and so too the data
-		 * phase, and we will end the transaction with half a cycle left
-		 * over.
-		 *
-		 * Force all 8D-8D-8D flashes to use an address width of 4 to
-		 * avoid this situation.
-		 */
-		nor->addr_width = 4;
-	} else if (nor->info->addr_width) {
-		nor->addr_width = nor->info->addr_width;
-	} else {
-		nor->addr_width = 3;
-	}
-
-	if (nor->addr_width == 3 && nor->params->size > 0x1000000) {
-		/* enable 4-byte addressing if the device exceeds 16MiB */
-		nor->addr_width = 4;
-	}
-
-	if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
-		dev_dbg(nor->dev, "address width is too large: %u\n",
-			nor->addr_width);
-		return -EINVAL;
-	}
-
-	/* Set 4byte opcodes when possible. */
-	if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
-	    !(nor->flags & SNOR_F_HAS_4BAIT))
-		spi_nor_set_4byte_opcodes(nor);
-
-	return 0;
-}
-
 static void spi_nor_debugfs_init(struct spi_nor *nor,
 				 const struct flash_info *info)
 {
@@ -3252,15 +3257,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	 * - select op codes for (Fast) Read, Page Program and Sector Erase.
 	 * - set the number of dummy cycles (mode cycles + wait states).
 	 * - set the SPI protocols for register and memory accesses.
+	 * - set the address width.
 	 */
 	ret = spi_nor_setup(nor, hwcaps);
 	if (ret)
 		return ret;
 
-	ret = spi_nor_set_addr_width(nor);
-	if (ret)
-		return ret;
-
 	/* Send all the required SPI flash commands to initialize device */
 	ret = spi_nor_init(nor);
 	if (ret)
-- 
2.17.1

[PATCH linux dev-5.15 22/26] mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Get rid of the static initialization of the flash parameters and
init them when parsing SFDP.
Generated a 256 Kbyte random data and did an erase, write, read back
and compare test. The flash uses for reads SPINOR_OP_READ_1_4_4 0xeb,
for erases SPINOR_OP_BE_4K 0x20, and for writes SPINOR_OP_PP 0x02.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211207140254.87681-12-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/winbond.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index f5e723c2d482..59d53b4c39c8 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -117,8 +117,7 @@ static const struct flash_info winbond_parts[] = {
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
 		.fixups = &w25q256_fixups },
 	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-			      SPI_NOR_QUAD_READ) },
+		PARSE_SFDP },
 	{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-- 
2.17.1

[PATCH linux dev-5.15 23/26] mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

s25fl256s0 does not define the SFDP tables nor implements the
RDSFDP 0x5a command. Skip the SFDP parsing in order to avoid
issuing an unsupported command to the flash.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211207140254.87681-13-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/spansion.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index f2a2995a7718..f44401287811 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -210,7 +210,8 @@ static const struct flash_info spansion_parts[] = {
 		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128)
 		FLAGS(USE_CLSR)
-		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+		NO_SFDP_FLAGS(SPI_NOR_SKIP_SFDP | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
 	{ "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512)
 		FLAGS(USE_CLSR)
 		NO_SFDP_FLAGS(SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-- 
2.17.1

[PATCH linux dev-5.15 24/26] mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Get rid of the static initialization of the flash parameters and
init them when parsing SFDP.
Generated a 256 Kbyte random data and did an erase, write, read back
and compare test. The flash uses for reads SPINOR_OP_READ_1_4_4_4B 0xec,
for erases SPINOR_OP_BE_4K_4B 0x21, and for writes SPINOR_OP_PP_1_1_4_4B
0x34.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211207140254.87681-14-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/gigadevice.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c
index 0c32e029b975..e9817233c51f 100644
--- a/drivers/mtd/spi-nor/gigadevice.c
+++ b/drivers/mtd/spi-nor/gigadevice.c
@@ -53,8 +53,8 @@ static const struct flash_info gigadevice_parts[] = {
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
 	{ "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512)
+		PARSE_SFDP
 		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
 		.fixups = &gd25q256_fixups },
 };
-- 
2.17.1

[PATCH linux dev-5.15 25/26] mtd: spi-nor: issi: is25lp256: Init flash based on SFDP

[Potin Lai]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Get rid of the static initialization of the flash parameters and
init them when parsing SFDP.
Generated a 256 Kbyte random data and did an erase, write, read back
and compare test. The flash uses for reads SPINOR_OP_READ_1_4_4_4B 0xec,
for erases SPINOR_OP_BE_4K_4B 0x21, and for writes SPINOR_OP_PP_4B 0x12.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211207140254.87681-15-tudor.ambarus@microchip.com
---
 drivers/mtd/spi-nor/issi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/issi.c b/drivers/mtd/spi-nor/issi.c
index 6707fcfda055..c4fff3c36356 100644
--- a/drivers/mtd/spi-nor/issi.c
+++ b/drivers/mtd/spi-nor/issi.c
@@ -46,7 +46,7 @@ static const struct flash_info issi_parts[] = {
 	{ "is25lp128",  INFO(0x9d6018, 0, 64 * 1024, 256)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
 	{ "is25lp256",  INFO(0x9d6019, 0, 64 * 1024, 512)
-		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+		PARSE_SFDP
 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
 		.fixups = &is25lp256_fixups },
 	{ "is25wp032",  INFO(0x9d7016, 0, 64 * 1024,  64)
-- 
2.17.1

[PATCH linux dev-5.15 26/26] mtd: spi-nor: winbond: Add support for w25q01jvq

[Potin Lai]

Add support for winbond w25q01jvq chip

Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Michael Walle <michael@walle.cc>

---

v4: https://lore.kernel.org/all/20220222092222.23108-1-potin.lai@quantatw.com/
v3: https://lore.kernel.org/all/20220222085148.21594-1-potin.lai@quantatw.com/
v2: https://lore.kernel.org/all/20220222064227.16724-1-potin.lai@quantatw.com/
v1: https://lore.kernel.org/all/20211224104522.24615-1-potin.lai@quantatw.com/

---
 drivers/mtd/spi-nor/winbond.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 59d53b4c39c8..960ce04ab381 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -131,6 +131,8 @@ static const struct flash_info winbond_parts[] = {
 	{ "w25q512jvq", INFO(0xef4020, 0, 64 * 1024, 1024)
 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
+	{ "w25q01jvq", INFO(0xef4021, 0, 64 * 1024, 2048)
+		PARSE_SFDP },
 };
 
 /**
-- 
2.17.1

Re: [PATCH linux dev-5.15 00/26] Add w25q01jvq and convert flash_info format

[Joel Stanley]

Hi Potin,

On Fri, 25 Feb 2022 at 02:42, Potin Lai <potin.lai@quantatw.com> wrote:
>
> This patch series add winbond w25q01jvq flash info and convert flash_info
> flags in new format to align with upstream (v5.17).
>
> The patchs from 01 to 25 are cherry-picked from kernel 5.17, and patch 26
> is new patch for adding w25q01jvq flash info.
>
> LINK: https://lore.kernel.org/all/20220222092222.23108-1-potin.lai@quantatw.com/

I think there was a misunderstanding. Patrick suggested that we simply
apply the v1 of your patch to support the w25q01jvq to dev-5.15:

 https://lore.kernel.org/all/20211224104522.24615-1-potin.lai@quantatw.com/

This avoids the need to backport the new style flash support from
mainline to v5.15. We avoid large backports where possible as it
complicates getting fixes: as the patches aren't in mainline v5.15,
when fixes are selected for backporting, they will not target v5.15 as
the code the fixes want to fix does not exist in that revision.
Additionally, large backports carry the risk of regressions, and
making our bmc kernel less stable.

We still want to do the work to upstream support before adding it to
the openbmc tree. That means next time we rebase on a future release,
the proper patches will be present. Thanks for doing this.

Another tip when submitting upstream: make sure you use
--suppress-cc=all, so you don't send the backport emails to the author
of patches you're backporting.

I applied v1 of your patch with correction to the chip name.

Cheers,

Joel

>
> Jonathan Lemon (1):
>   mtd: spi-nor: Enable locking for n25q128a13
>
> Potin Lai (1):
>   mtd: spi-nor: winbond: Add support for w25q01jvq
>
> Tudor Ambarus (24):
>   mtd: spi-nor: core: Fix spi_nor_flash_parameter otp description
>   mtd: spi-nor: core: Use container_of to get the pointer to struct
>     spi_nor
>   mtd: spi-nor: Get rid of nor->page_size
>   mtd: spi-nor: core: Introduce the late_init() hook
>   mtd: spi-nor: atmel: Use flash late_init() for locking
>   mtd: spi-nor: sst: Use flash late_init() for locking
>   mtd: spi-nor: winbond: Use manufacturer late_init() for OTP ops
>   mtd: spi-nor: xilinx: Use manufacturer late_init() to set setup method
>   mtd: spi-nor: sst: Use manufacturer late_init() to set _write()
>   mtd: spi-nor: spansion: Use manufacturer late_init()
>   mtd: spi-nor: Fix mtd size for s3an flashes
>   mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of
>     calls
>   mtd: spi-nor: Introduce spi_nor_set_mtd_info()
>   mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is
>     defined
>   mtd: spi-nor: core: Introduce flash_info mfr_flags
>   mtd: spi-nor: Rework the flash_info flags
>   mtd: spi-nor: Introduce spi_nor_init_flags()
>   mtd: spi-nor: Introduce spi_nor_init_fixup_flags()
>   mtd: spi-nor: core: Init all flash parameters based on SFDP where
>     possible
>   mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup()
>   mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP
>   mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing
>   mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP
>   mtd: spi-nor: issi: is25lp256: Init flash based on SFDP
>
>  drivers/mtd/spi-nor/atmel.c      |  79 +++--
>  drivers/mtd/spi-nor/catalyst.c   |  15 +-
>  drivers/mtd/spi-nor/core.c       | 536 +++++++++++++++++--------------
>  drivers/mtd/spi-nor/core.h       | 217 ++++++++-----
>  drivers/mtd/spi-nor/eon.c        |  33 +-
>  drivers/mtd/spi-nor/esmt.c       |  15 +-
>  drivers/mtd/spi-nor/everspin.c   |  12 +-
>  drivers/mtd/spi-nor/fujitsu.c    |   3 +-
>  drivers/mtd/spi-nor/gigadevice.c |  57 ++--
>  drivers/mtd/spi-nor/intel.c      |  12 +-
>  drivers/mtd/spi-nor/issi.c       |  60 ++--
>  drivers/mtd/spi-nor/macronix.c   | 105 +++---
>  drivers/mtd/spi-nor/micron-st.c  | 208 ++++++------
>  drivers/mtd/spi-nor/otp.c        |   2 +-
>  drivers/mtd/spi-nor/sfdp.c       |  20 ++
>  drivers/mtd/spi-nor/spansion.c   | 162 +++++-----
>  drivers/mtd/spi-nor/sst.c        |  96 ++++--
>  drivers/mtd/spi-nor/swp.c        |   2 +-
>  drivers/mtd/spi-nor/winbond.c    | 174 ++++++----
>  drivers/mtd/spi-nor/xilinx.c     |  21 +-
>  drivers/mtd/spi-nor/xmc.c        |  10 +-
>  include/linux/mtd/spi-nor.h      |   2 -
>  22 files changed, 1045 insertions(+), 796 deletions(-)
>
> --
> 2.17.1
>

Re: [PATCH linux dev-5.15 00/26] Add w25q01jvq and convert flash_info format

[Potin Lai (賴柏廷)]

Joel Stanley 於 2022/2/25 下午 12:01 寫道:
> Hi Potin,
>
> On Fri, 25 Feb 2022 at 02:42, Potin Lai <potin.lai@quantatw.com> wrote:
>> This patch series add winbond w25q01jvq flash info and convert flash_info
>> flags in new format to align with upstream (v5.17).
>>
>> The patchs from 01 to 25 are cherry-picked from kernel 5.17, and patch 26
>> is new patch for adding w25q01jvq flash info.
>>
>> LINK: https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fall%2F20220222092222.23108-1-potin.lai%40quantatw.com%2F&amp;data=04%7C01%7Cpotin.lai%40quantatw.com%7C6d400fa8312642184de708d9f8139752%7C179b032707fc4973ac738de7313561b2%7C1%7C0%7C637813585320965043%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&amp;sdata=EiinHg%2B1slS1%2BHe14dooydxIDiYPzX%2BLo5ZcoXvZuqA%3D&amp;reserved=0
> I think there was a misunderstanding. Patrick suggested that we simply
> apply the v1 of your patch to support the w25q01jvq to dev-5.15:
>
>  https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore.kernel.org%2Fall%2F20211224104522.24615-1-potin.lai%40quantatw.com%2F&amp;data=04%7C01%7Cpotin.lai%40quantatw.com%7C6d400fa8312642184de708d9f8139752%7C179b032707fc4973ac738de7313561b2%7C1%7C0%7C637813585320965043%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&amp;sdata=ofd7qkIFG7%2F9%2Bmu53XA%2F4fXidxFn5TvGiE4BNzH5KqE%3D&amp;reserved=0
>
> This avoids the need to backport the new style flash support from
> mainline to v5.15. We avoid large backports where possible as it
> complicates getting fixes: as the patches aren't in mainline v5.15,
> when fixes are selected for backporting, they will not target v5.15 as
> the code the fixes want to fix does not exist in that revision.
> Additionally, large backports carry the risk of regressions, and
> making our bmc kernel less stable.

I just notice that I missed the reply from Patrick of my question (not sure why it was mark as junk mail...), sorry about sending this patch series.

>
> We still want to do the work to upstream support before adding it to
> the openbmc tree. That means next time we rebase on a future release,
> the proper patches will be present. Thanks for doing this.
>
> Another tip when submitting upstream: make sure you use
> --suppress-cc=all, so you don't send the backport emails to the author
> of patches you're backporting.

Got it, thanks a lot for your tip, will add this in future.

>
> I applied v1 of your patch with correction to the chip name.

Thank you for apply v1 patch.

Potin

>
> Cheers,
>
> Joel
>
>> Jonathan Lemon (1):
>>   mtd: spi-nor: Enable locking for n25q128a13
>>
>> Potin Lai (1):
>>   mtd: spi-nor: winbond: Add support for w25q01jvq
>>
>> Tudor Ambarus (24):
>>   mtd: spi-nor: core: Fix spi_nor_flash_parameter otp description
>>   mtd: spi-nor: core: Use container_of to get the pointer to struct
>>     spi_nor
>>   mtd: spi-nor: Get rid of nor->page_size
>>   mtd: spi-nor: core: Introduce the late_init() hook
>>   mtd: spi-nor: atmel: Use flash late_init() for locking
>>   mtd: spi-nor: sst: Use flash late_init() for locking
>>   mtd: spi-nor: winbond: Use manufacturer late_init() for OTP ops
>>   mtd: spi-nor: xilinx: Use manufacturer late_init() to set setup method
>>   mtd: spi-nor: sst: Use manufacturer late_init() to set _write()
>>   mtd: spi-nor: spansion: Use manufacturer late_init()
>>   mtd: spi-nor: Fix mtd size for s3an flashes
>>   mtd: spi-nor: core: Don't use mtd_info in the NOR's probe sequence of
>>     calls
>>   mtd: spi-nor: Introduce spi_nor_set_mtd_info()
>>   mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is
>>     defined
>>   mtd: spi-nor: core: Introduce flash_info mfr_flags
>>   mtd: spi-nor: Rework the flash_info flags
>>   mtd: spi-nor: Introduce spi_nor_init_flags()
>>   mtd: spi-nor: Introduce spi_nor_init_fixup_flags()
>>   mtd: spi-nor: core: Init all flash parameters based on SFDP where
>>     possible
>>   mtd: spi-nor: core: Move spi_nor_set_addr_width() in spi_nor_setup()
>>   mtd: spi-nor: winbond: w25q256jvm: Init flash based on SFDP
>>   mtd: spi-nor: spansion: s25fl256s0: Skip SFDP parsing
>>   mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP
>>   mtd: spi-nor: issi: is25lp256: Init flash based on SFDP
>>
>>  drivers/mtd/spi-nor/atmel.c      |  79 +++--
>>  drivers/mtd/spi-nor/catalyst.c   |  15 +-
>>  drivers/mtd/spi-nor/core.c       | 536 +++++++++++++++++--------------
>>  drivers/mtd/spi-nor/core.h       | 217 ++++++++-----
>>  drivers/mtd/spi-nor/eon.c        |  33 +-
>>  drivers/mtd/spi-nor/esmt.c       |  15 +-
>>  drivers/mtd/spi-nor/everspin.c   |  12 +-
>>  drivers/mtd/spi-nor/fujitsu.c    |   3 +-
>>  drivers/mtd/spi-nor/gigadevice.c |  57 ++--
>>  drivers/mtd/spi-nor/intel.c      |  12 +-
>>  drivers/mtd/spi-nor/issi.c       |  60 ++--
>>  drivers/mtd/spi-nor/macronix.c   | 105 +++---
>>  drivers/mtd/spi-nor/micron-st.c  | 208 ++++++------
>>  drivers/mtd/spi-nor/otp.c        |   2 +-
>>  drivers/mtd/spi-nor/sfdp.c       |  20 ++
>>  drivers/mtd/spi-nor/spansion.c   | 162 +++++-----
>>  drivers/mtd/spi-nor/sst.c        |  96 ++++--
>>  drivers/mtd/spi-nor/swp.c        |   2 +-
>>  drivers/mtd/spi-nor/winbond.c    | 174 ++++++----
>>  drivers/mtd/spi-nor/xilinx.c     |  21 +-
>>  drivers/mtd/spi-nor/xmc.c        |  10 +-
>>  include/linux/mtd/spi-nor.h      |   2 -
>>  22 files changed, 1045 insertions(+), 796 deletions(-)
>>
>> --
>> 2.17.1
>>

Re: [PATCH linux dev-5.15 00/26] Add w25q01jvq and convert flash_info format

[Joel Stanley]

On Fri, 25 Feb 2022 at 04:19, Potin Lai (賴柏廷) <Potin.Lai@quantatw.com> wrote:
>
> Joel Stanley 於 2022/2/25 下午 12:01 寫道:

> > This avoids the need to backport the new style flash support from
> > mainline to v5.15. We avoid large backports where possible as it
> > complicates getting fixes: as the patches aren't in mainline v5.15,
> > when fixes are selected for backporting, they will not target v5.15 as
> > the code the fixes want to fix does not exist in that revision.
> > Additionally, large backports carry the risk of regressions, and
> > making our bmc kernel less stable.
>
> I just notice that I missed the reply from Patrick of my question (not sure why it was mark as junk mail...), sorry about sending this patch series.

No worries.

> > We still want to do the work to upstream support before adding it to
> > the openbmc tree. That means next time we rebase on a future release,
> > the proper patches will be present. Thanks for doing this.
> >
> > Another tip when submitting upstream: make sure you use
> > --suppress-cc=all, so you don't send the backport emails to the author
> > of patches you're backporting.

I meant: when submitting backports of upstream patches.

Cheers,

Joel