openbmc.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Winiarska, Iwona" <iwona.winiarska@intel.com>
To: "linux@roeck-us.net" <linux@roeck-us.net>
Cc: "linux-aspeed@lists.ozlabs.org" <linux-aspeed@lists.ozlabs.org>,
	"linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
	"Williams, Dan J" <dan.j.williams@intel.com>,
	"zweiss@equinix.com" <zweiss@equinix.com>,
	"jae.hyun.yoo@linux.intel.com" <jae.hyun.yoo@linux.intel.com>,
	"andriy.shevchenko@linux.intel.com"
	<andriy.shevchenko@linux.intel.com>,
	"corbet@lwn.net" <corbet@lwn.net>,
	"openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>,
	"x86@kernel.org" <x86@kernel.org>,
	"pierre-louis.bossart@linux.intel.com"
	<pierre-louis.bossart@linux.intel.com>,
	"mingo@redhat.com" <mingo@redhat.com>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"jdelvare@suse.com" <jdelvare@suse.com>,
	"arnd@arndb.de" <arnd@arndb.de>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"bp@alien8.de" <bp@alien8.de>,
	"Lutomirski, Andy" <luto@kernel.org>,
	"tglx@linutronix.de" <tglx@linutronix.de>,
	"mchehab@kernel.org" <mchehab@kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"linux-hwmon@vger.kernel.org" <linux-hwmon@vger.kernel.org>,
	"Luck,  Tony" <tony.luck@intel.com>,
	"andrew@aj.id.au" <andrew@aj.id.au>,
	"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
	"rdunlap@infradead.org" <rdunlap@infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"yazen.ghannam@amd.com" <yazen.ghannam@amd.com>,
	"olof@lixom.net" <olof@lixom.net>
Subject: Re: [PATCH v2 13/15] hwmon: peci: Add dimmtemp driver
Date: Thu, 5 Aug 2021 21:48:31 +0000	[thread overview]
Message-ID: <941c59624b65c727f828b2b30a8b64c3067ff7c9.camel@intel.com> (raw)
In-Reply-To: <ff8f8b20-33af-08a0-6036-03429bf69730@roeck-us.net>

On Wed, 2021-08-04 at 10:33 -0700, Guenter Roeck wrote:
> On 8/4/21 3:46 AM, Winiarska, Iwona wrote:
> > On Tue, 2021-08-03 at 08:39 -0700, Guenter Roeck wrote:
> > > On Tue, Aug 03, 2021 at 01:31:32PM +0200, Iwona Winiarska wrote:
> > > > Add peci-dimmtemp driver for Temperature Sensor on DIMM readings that
> > > > are accessible via the processor PECI interface.
> > > > 
> > > > The main use case for the driver (and PECI interface) is out-of-band
> > > > management, where we're able to obtain thermal readings from an external
> > > > entity connected with PECI, e.g. BMC on server platforms.
> > > > 
> > > > Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> > > > Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> > > > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
> > > > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> > > > ---
> > > > Note that the timeout was completely removed - we're going to probe
> > > > for detected DIMMs every 5 seconds until we reach "stable" state of
> > > > either getting correct DIMM data or getting all -EINVAL (which
> > > > suggest that the CPU doesn't have any DIMMs).
> > > > 
> > > >   drivers/hwmon/peci/Kconfig    |  13 +
> > > >   drivers/hwmon/peci/Makefile   |   2 +
> > > >   drivers/hwmon/peci/dimmtemp.c | 614 ++++++++++++++++++++++++++++++++++
> > > >   3 files changed, 629 insertions(+)
> > > >   create mode 100644 drivers/hwmon/peci/dimmtemp.c
> > > > 
> > > > diff --git a/drivers/hwmon/peci/Kconfig b/drivers/hwmon/peci/Kconfig
> > > > index e10eed68d70a..9d32a57badfe 100644
> > > > --- a/drivers/hwmon/peci/Kconfig
> > > > +++ b/drivers/hwmon/peci/Kconfig
> > > > @@ -14,5 +14,18 @@ config SENSORS_PECI_CPUTEMP
> > > >            This driver can also be built as a module. If so, the module
> > > >            will be called peci-cputemp.
> > > >   
> > > > +config SENSORS_PECI_DIMMTEMP
> > > > +       tristate "PECI DIMM temperature monitoring client"
> > > > +       depends on PECI
> > > > +       select SENSORS_PECI
> > > > +       select PECI_CPU
> > > > +       help
> > > > +         If you say yes here you get support for the generic Intel PECI
> > > > hwmon
> > > > +         driver which provides Temperature Sensor on DIMM readings that
> > > > are
> > > > +         accessible via the processor PECI interface.
> > > > +
> > > > +         This driver can also be built as a module. If so, the module
> > > > +         will be called peci-dimmtemp.
> > > > +
> > > >   config SENSORS_PECI
> > > >          tristate
> > > > diff --git a/drivers/hwmon/peci/Makefile b/drivers/hwmon/peci/Makefile
> > > > index e8a0ada5ab1f..191cfa0227f3 100644
> > > > --- a/drivers/hwmon/peci/Makefile
> > > > +++ b/drivers/hwmon/peci/Makefile
> > > > @@ -1,5 +1,7 @@
> > > >   # SPDX-License-Identifier: GPL-2.0-only
> > > >   
> > > >   peci-cputemp-y := cputemp.o
> > > > +peci-dimmtemp-y := dimmtemp.o
> > > >   
> > > >   obj-$(CONFIG_SENSORS_PECI_CPUTEMP)     += peci-cputemp.o
> > > > +obj-$(CONFIG_SENSORS_PECI_DIMMTEMP)    += peci-dimmtemp.o
> > > > diff --git a/drivers/hwmon/peci/dimmtemp.c
> > > > b/drivers/hwmon/peci/dimmtemp.c
> > > > new file mode 100644
> > > > index 000000000000..6264c29bb6c0
> > > > --- /dev/null
> > > > +++ b/drivers/hwmon/peci/dimmtemp.c
> > > > @@ -0,0 +1,614 @@
> > > > +// SPDX-License-Identifier: GPL-2.0-only
> > > > +// Copyright (c) 2018-2021 Intel Corporation
> > > > +
> > > > +#include <linux/auxiliary_bus.h>
> > > > +#include <linux/bitfield.h>
> > > > +#include <linux/bitops.h>
> > > > +#include <linux/hwmon.h>
> > > > +#include <linux/jiffies.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/peci.h>
> > > > +#include <linux/peci-cpu.h>
> > > > +#include <linux/units.h>
> > > > +#include <linux/workqueue.h>
> > > > +#include <linux/x86/intel-family.h>
> > > > +
> > > > +#include "common.h"
> > > > +
> > > > +#define DIMM_MASK_CHECK_DELAY_JIFFIES  msecs_to_jiffies(5000)
> > > > +
> > > > +/* Max number of channel ranks and DIMM index per channel */
> > > > +#define CHAN_RANK_MAX_ON_HSX   8
> > > > +#define DIMM_IDX_MAX_ON_HSX    3
> > > > +#define CHAN_RANK_MAX_ON_BDX   4
> > > > +#define DIMM_IDX_MAX_ON_BDX    3
> > > > +#define CHAN_RANK_MAX_ON_BDXD  2
> > > > +#define DIMM_IDX_MAX_ON_BDXD   2
> > > > +#define CHAN_RANK_MAX_ON_SKX   6
> > > > +#define DIMM_IDX_MAX_ON_SKX    2
> > > > +#define CHAN_RANK_MAX_ON_ICX   8
> > > > +#define DIMM_IDX_MAX_ON_ICX    2
> > > > +#define CHAN_RANK_MAX_ON_ICXD  4
> > > > +#define DIMM_IDX_MAX_ON_ICXD   2
> > > > +
> > > > +#define CHAN_RANK_MAX          CHAN_RANK_MAX_ON_HSX
> > > > +#define DIMM_IDX_MAX           DIMM_IDX_MAX_ON_HSX
> > > > +#define DIMM_NUMS_MAX          (CHAN_RANK_MAX * DIMM_IDX_MAX)
> > > > +
> > > > +#define CPU_SEG_MASK           GENMASK(23, 16)
> > > > +#define GET_CPU_SEG(x)         (((x) & CPU_SEG_MASK) >> 16)
> > > > +#define CPU_BUS_MASK           GENMASK(7, 0)
> > > > +#define GET_CPU_BUS(x)         ((x) & CPU_BUS_MASK)
> > > > +
> > > > +#define DIMM_TEMP_MAX          GENMASK(15, 8)
> > > > +#define DIMM_TEMP_CRIT         GENMASK(23, 16)
> > > > +#define GET_TEMP_MAX(x)                (((x) & DIMM_TEMP_MAX) >> 8)
> > > > +#define GET_TEMP_CRIT(x)       (((x) & DIMM_TEMP_CRIT) >> 16)
> > > > +
> > > > +struct peci_dimmtemp;
> > > > +
> > > > +struct dimm_info {
> > > > +       int chan_rank_max;
> > > > +       int dimm_idx_max;
> > > > +       u8 min_peci_revision;
> > > > +       int (*read_thresholds)(struct peci_dimmtemp *priv, int
> > > > dimm_order,
> > > > +                              int chan_rank, u32 *data);
> > > > +};
> > > > +
> > > > +struct peci_dimm_thresholds {
> > > > +       long temp_max;
> > > > +       long temp_crit;
> > > > +       struct peci_sensor_state state;
> > > > +};
> > > > +
> > > > +enum peci_dimm_threshold_type {
> > > > +       temp_max_type,
> > > > +       temp_crit_type,
> > > > +};
> > > > +
> > > > +struct peci_dimmtemp {
> > > > +       struct peci_device *peci_dev;
> > > > +       struct device *dev;
> > > > +       const char *name;
> > > > +       const struct dimm_info *gen_info;
> > > > +       struct delayed_work detect_work;
> > > > +       struct {
> > > > +               struct peci_sensor_data temp;
> > > > +               struct peci_dimm_thresholds thresholds;
> > > > +       } dimm[DIMM_NUMS_MAX];
> > > > +       char **dimmtemp_label;
> > > > +       DECLARE_BITMAP(dimm_mask, DIMM_NUMS_MAX);
> > > > +};
> > > > +
> > > > +static u8 __dimm_temp(u32 reg, int dimm_order)
> > > > +{
> > > > +       return (reg >> (dimm_order * 8)) & 0xff;
> > > > +}
> > > > +
> > > > +static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no, long
> > > > *val)
> > > > +{
> > > > +       int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
> > > > +       int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
> > > > +       u32 data;
> > > > +       int ret;
> > > 
> > >          int ret = 0;
> > > 
> > > > +
> > > > +       mutex_lock(&priv->dimm[dimm_no].temp.state.lock);
> > > > +       if (!peci_sensor_need_update(&priv->dimm[dimm_no].temp.state))
> > > > +               goto skip_update;
> > > > +
> > > > +       ret = peci_pcs_read(priv->peci_dev, PECI_PCS_DDR_DIMM_TEMP,
> > > > chan_rank, &data);
> > > > +       if (ret) {
> > > > +               mutex_unlock(&priv->dimm[dimm_no].temp.state.lock);
> > > > +               return ret;
> > > > +       }
> > > 
> > >          if (ret)
> > >                  goto unlock;
> > > 
> > > > +
> > > > +       priv->dimm[dimm_no].temp.value = __dimm_temp(data, dimm_order) *
> > > > MILLIDEGREE_PER_DEGREE;
> > > > +
> > > > +       peci_sensor_mark_updated(&priv->dimm[dimm_no].temp.state);
> > > > +
> > > > +skip_update:
> > > > +       *val = priv->dimm[dimm_no].temp.value;
> > > 
> > > unlock:
> > > > +       mutex_unlock(&priv->dimm[dimm_no].temp.state.lock);
> > > > +       return 0;
> > > 
> > >          return ret;
> > 
> > Ack.
> > 
> > > 
> > > > +}
> > > > +
> > > > +static int update_thresholds(struct peci_dimmtemp *priv, int dimm_no)
> > > > +{
> > > > +       int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
> > > > +       int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
> > > > +       u32 data;
> > > > +       int ret;
> > > > +
> > > > +       if (!peci_sensor_need_update(&priv-
> > > > >dimm[dimm_no].thresholds.state))
> > > > +               return 0;
> > > > +
> > > > +       ret = priv->gen_info->read_thresholds(priv, dimm_order,
> > > > chan_rank,
> > > > &data);
> > > > +       if (ret == -ENODATA) /* Use default or previous value */
> > > > +               return 0;
> > > > +       if (ret)
> > > > +               return ret;
> > > > +
> > > > +       priv->dimm[dimm_no].thresholds.temp_max = GET_TEMP_MAX(data) *
> > > > MILLIDEGREE_PER_DEGREE;
> > > > +       priv->dimm[dimm_no].thresholds.temp_crit = GET_TEMP_CRIT(data) *
> > > > MILLIDEGREE_PER_DEGREE;
> > > > +
> > > > +       peci_sensor_mark_updated(&priv->dimm[dimm_no].thresholds.state);
> > > > +
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +static int get_dimm_thresholds(struct peci_dimmtemp *priv, enum
> > > > peci_dimm_threshold_type type,
> > > > +                              int dimm_no, long *val)
> > > > +{
> > > > +       int ret;
> > > > +
> > > > +       mutex_lock(&priv->dimm[dimm_no].thresholds.state.lock);
> > > > +       ret = update_thresholds(priv, dimm_no);
> > > > +       if (ret)
> > > > +               goto unlock;
> > > > +
> > > > +       switch (type) {
> > > > +       case temp_max_type:
> > > > +               *val = priv->dimm[dimm_no].thresholds.temp_max;
> > > > +               break;
> > > > +       case temp_crit_type:
> > > > +               *val = priv->dimm[dimm_no].thresholds.temp_crit;
> > > > +               break;
> > > > +       default:
> > > > +               ret = -EOPNOTSUPP;
> > > > +               break;
> > > > +       }
> > > > +unlock:
> > > > +       mutex_unlock(&priv->dimm[dimm_no].thresholds.state.lock);
> > > > +
> > > > +       return ret;
> > > > +}
> > > > +
> > > > +static int dimmtemp_read_string(struct device *dev,
> > > > +                               enum hwmon_sensor_types type,
> > > > +                               u32 attr, int channel, const char **str)
> > > > +{
> > > > +       struct peci_dimmtemp *priv = dev_get_drvdata(dev);
> > > > +
> > > > +       if (attr != hwmon_temp_label)
> > > > +               return -EOPNOTSUPP;
> > > > +
> > > > +       *str = (const char *)priv->dimmtemp_label[channel];
> > > > +
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +static int dimmtemp_read(struct device *dev, enum hwmon_sensor_types
> > > > type,
> > > > +                        u32 attr, int channel, long *val)
> > > > +{
> > > > +       struct peci_dimmtemp *priv = dev_get_drvdata(dev);
> > > > +
> > > > +       switch (attr) {
> > > > +       case hwmon_temp_input:
> > > > +               return get_dimm_temp(priv, channel, val);
> > > > +       case hwmon_temp_max:
> > > > +               return get_dimm_thresholds(priv, temp_max_type, channel,
> > > > val);
> > > > +       case hwmon_temp_crit:
> > > > +               return get_dimm_thresholds(priv, temp_crit_type,
> > > > channel,
> > > > val);
> > > > +       default:
> > > > +               break;
> > > > +       }
> > > > +
> > > > +       return -EOPNOTSUPP;
> > > > +}
> > > > +
> > > > +static umode_t dimmtemp_is_visible(const void *data, enum
> > > > hwmon_sensor_types type,
> > > > +                                  u32 attr, int channel)
> > > > +{
> > > > +       const struct peci_dimmtemp *priv = data;
> > > > +
> > > > +       if (test_bit(channel, priv->dimm_mask))
> > > > +               return 0444;
> > > > +
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +static const struct hwmon_ops peci_dimmtemp_ops = {
> > > > +       .is_visible = dimmtemp_is_visible,
> > > > +       .read_string = dimmtemp_read_string,
> > > > +       .read = dimmtemp_read,
> > > > +};
> > > > +
> > > > +static int check_populated_dimms(struct peci_dimmtemp *priv)
> > > > +{
> > > > +       int chan_rank_max = priv->gen_info->chan_rank_max;
> > > > +       int dimm_idx_max = priv->gen_info->dimm_idx_max;
> > > > +       u32 chan_rank_empty = 0;
> > > > +       u64 dimm_mask = 0;
> > > > +       int chan_rank, dimm_idx, ret;
> > > > +       u32 pcs;
> > > > +
> > > > +       BUILD_BUG_ON(CHAN_RANK_MAX > 32);
> > > > +       BUILD_BUG_ON(DIMM_NUMS_MAX > 64);
> > > 
> > > I don't immediately see the value of those build bugs. What happens if
> > > CHAN_RANK_MAX > 32 or DIMM_NUMS_MAX > 64 ? Where do those limits come
> > > from ?
> > 
> > Supported HW doesn't come near the limit for now - it's just an "artificial"
> > limit imposed by variables we're using (u64 for dimm_mask and u32 for
> > chan_rank_empty).
> > 
> 
> Please use a value derived from the size of those variables for the check
> to clarify and explain the constraints.

Sure, I'll use BITS_PER_TYPE.

Thanks
-Iwona

> 
> Thanks,
> Guenter


  reply	other threads:[~2021-08-05 23:11 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-03 11:31 [PATCH v2 00/15] Introduce PECI subsystem Iwona Winiarska
2021-08-03 11:31 ` [PATCH v2 01/15] x86/cpu: Move intel-family to arch-independent headers Iwona Winiarska
2021-10-04 19:03   ` Borislav Petkov
2021-10-11 19:21     ` Winiarska, Iwona
2021-10-11 19:40       ` Dave Hansen
2021-10-11 20:53         ` Winiarska, Iwona
2021-10-11 23:12           ` Dave Hansen
2021-10-11 20:06       ` Borislav Petkov
2021-10-11 20:38         ` Winiarska, Iwona
2021-10-11 21:31           ` Borislav Petkov
2021-10-12 23:15             ` Winiarska, Iwona
2021-10-13  6:42               ` Borislav Petkov
2021-08-03 11:31 ` [PATCH v2 02/15] x86/cpu: Extract cpuid helpers to arch-independent Iwona Winiarska
2021-10-04 19:08   ` Borislav Petkov
2021-10-11 19:32     ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 03/15] dt-bindings: Add generic bindings for PECI Iwona Winiarska
2021-08-11 18:11   ` Rob Herring
2021-08-03 11:31 ` [PATCH v2 04/15] dt-bindings: Add bindings for peci-aspeed Iwona Winiarska
2021-08-11 18:11   ` Rob Herring
2021-08-03 11:31 ` [PATCH v2 05/15] ARM: dts: aspeed: Add PECI controller nodes Iwona Winiarska
2021-08-03 11:31 ` [PATCH v2 06/15] peci: Add core infrastructure Iwona Winiarska
2021-08-25 22:58   ` Dan Williams
2021-08-26 22:40     ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 07/15] peci: Add peci-aspeed controller driver Iwona Winiarska
2021-08-26  1:35   ` Dan Williams
2021-08-26 23:54     ` Winiarska, Iwona
2021-08-27 16:24       ` Dan Williams
2021-08-29 19:42         ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 08/15] peci: Add device detection Iwona Winiarska
2021-08-27 19:01   ` Dan Williams
2021-11-15 22:18     ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 09/15] peci: Add sysfs interface for PECI bus Iwona Winiarska
2021-08-27 19:11   ` Dan Williams
2021-11-15 22:19     ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 10/15] peci: Add support for PECI device drivers Iwona Winiarska
2021-08-27 21:19   ` Dan Williams
2021-11-15 22:20     ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 11/15] peci: Add peci-cpu driver Iwona Winiarska
2021-08-03 11:31 ` [PATCH v2 12/15] hwmon: peci: Add cputemp driver Iwona Winiarska
2021-08-03 15:24   ` Guenter Roeck
2021-08-04 10:43     ` Winiarska, Iwona
2021-08-03 11:31 ` [PATCH v2 13/15] hwmon: peci: Add dimmtemp driver Iwona Winiarska
2021-08-03 15:39   ` Guenter Roeck
2021-08-04 10:46     ` Winiarska, Iwona
2021-08-04 17:33       ` Guenter Roeck
2021-08-05 21:48         ` Winiarska, Iwona [this message]
2021-08-03 11:31 ` [PATCH v2 14/15] docs: hwmon: Document PECI drivers Iwona Winiarska
2021-08-03 11:31 ` [PATCH v2 15/15] docs: Add PECI documentation Iwona Winiarska
2021-08-05 12:17 ` [PATCH v2 00/15] Introduce PECI subsystem Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=941c59624b65c727f828b2b30a8b64c3067ff7c9.camel@intel.com \
    --to=iwona.winiarska@intel.com \
    --cc=andrew@aj.id.au \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=bp@alien8.de \
    --cc=corbet@lwn.net \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jae.hyun.yoo@linux.intel.com \
    --cc=jdelvare@suse.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=luto@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mingo@redhat.com \
    --cc=olof@lixom.net \
    --cc=openbmc@lists.ozlabs.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=rdunlap@infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=tony.luck@intel.com \
    --cc=x86@kernel.org \
    --cc=yazen.ghannam@amd.com \
    --cc=zweiss@equinix.com \
    --subject='Re: [PATCH v2 13/15] hwmon: peci: Add dimmtemp driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).