From: Oskar Senft <osk@google.com>
To: openbmc@lists.ozlabs.org, joel@jms.id.au
Cc: Ed Tanous <ed@tanous.net>,
Vijay Khemka <vijaykhemkalinux@gmail.com>,
Jason Hargis <jason.hargis@equuscs.com>
Subject: Re: [PATCH linux dev-5.10] ARM: dts: aspeed: Add TYAN S7106 BMC machine
Date: Tue, 7 Sep 2021 19:44:55 -0400 [thread overview]
Message-ID: <CABoTLcTTk_wfGbFHrwKrLcKdtpMKqUnt2KijNPvYhpEo_+7M6w@mail.gmail.com> (raw)
In-Reply-To: <20210907205200.1193552-1-osk@google.com>
I'm working with Joel Stanley <joel@jms.id.au> on the review of the
upstream change, so this commit can be ignored for now. I'll re-send
as V2 as soon as the upstream change is complete.
Oskar.
On Tue, Sep 7, 2021 at 4:52 PM Oskar Senft <osk@google.com> wrote:
>
> The TYAN S7106 is a server platform with an ASPEED AST2500 BMC.
>
> Submitted to upstream in
> https://lists.ozlabs.org/pipermail/linux-aspeed/2021-September/006326.html
>
> Signed-off-by: Oskar Senft <osk@google.com>
> ---
> arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 415 ++++++++++++++++++++
> 1 file changed, 415 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
> new file mode 100644
> index 000000000000..292bfb1a4bb2
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
> @@ -0,0 +1,415 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "Tyan S7106 BMC";
> + compatible = "tyan,s7106-bmc", "aspeed,ast2500";
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + p2a_memory: region@987F0000 {
> + no-map;
> + reg = <0x987F0000 0x00010000>; /* 64KB */
> + };
> +
> + vga_memory: framebuffer@9f000000 {
> + no-map;
> + reg = <0x9f000000 0x01000000>; /* 16M */
> + };
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>; /* 16M */
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + identify {
> + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + heartbeat {
> + gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> + <&adc 12>, <&adc 13>, <&adc 14>;
> + };
> +
> + iio-hwmon-battery {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 15>;
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + label = "bmc";
> + status = "okay";
> + m25p,fast-read;
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash@0 {
> + status = "okay";
> + label = "pnor";
> + m25p,fast-read;
> + };
> +};
> +
> +&uart1 {
> + /* Rear RS-232 connector */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd1_default
> + &pinctrl_rxd1_default>;
> +};
> +
> +&uart2 {
> + /* RS-232 connector on header */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd2_default
> + &pinctrl_rxd2_default>;
> +};
> +
> +&uart3 {
> + /* Alternative to vuart to internally connect (route) to uart1
> + * when vuart cannot be used due to BIOS limitations.
> + */
> + status = "okay";
> +};
> +
> +&uart4 {
> + /* Alternative to vuart to internally connect (route) to the
> + * external port usually used by uart1 when vuart cannot be
> + * used due to BIOS limitations.
> + */
> + status = "okay";
> +};
> +
> +&uart5 {
> + /* BMC "debug" (console) UART; connected to RS-232 connector
> + * on header; selectable via jumpers as alternative to uart2
> + */
> + status = "okay";
> +};
> +
> +&vuart {
> + status = "okay";
> +};
> +
> +&lpc_ctrl {
> + status = "okay";
> +};
> +
> +&p2a {
> + status = "okay";
> + memory-region = <&p2a_memory>;
> +};
> +
> +&lpc_snoop {
> + status = "okay";
> + snoop-ports = <0x80>;
> +};
> +
> +&adc {
> + status = "okay";
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default
> + &pinctrl_pwm1_default
> + &pinctrl_pwm3_default
> + &pinctrl_pwm4_default>;
> +
> + /* CPU fan #0 */
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> + };
> +
> + /* CPU fan #1 */
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x01>;
> + };
> +
> + /* PWM group for chassis fans #1, #2, #3 and #4 */
> + fan@2 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x03>;
> + };
> +
> + fan@4 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04>;
> + };
> +
> + fan@5 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x05>;
> + };
> +
> + /* PWM group for chassis fans #5 and #6 */
> + fan@6 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06>;
> + };
> +
> + fan@7 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x07>;
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + /* Hardware monitor with temperature sensors */
> + nct7802@28 {
> + compatible = "nuvoton,nct7802";
> + reg = <0x28>;
> + };
> +
> + /* Also connected to:
> + * - IPMB pin header
> + * - CPU #0 memory error LED @ 0x3A
> + * - CPU #1 memory error LED @ 0x3C
> + */
> +};
> +
> +&i2c1 {
> + /* Directly connected to PCH SMBUS #0 */
> + status = "okay";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + /* BMC EEPROM, incl. mainboard FRU */
> + eeprom@50 {
> + compatible = "atmel,24c256";
> + reg = <0x50>;
> + };
> +
> + /* Also connected to:
> + * - fan header
> + * - mini-SAS HD connector
> + * - SSATA SGPIO
> + * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low) to PCH SMBUS #3
> + */
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + /* PSU1 FRU @ 0xA0 */
> + eeprom@50 {
> + compatible = "atmel,24c02";
> + reg = <0x50>;
> + };
> +
> + /* PSU2 FRU @ 0xA2 */
> + eeprom@51 {
> + compatible = "atmel,24c02";
> + reg = <0x51>;
> + };
> +
> + /* PSU1 @ 0xB0 */
> + power-supply@58 {
> + compatible = "pmbus";
> + reg = <0x58>;
> + };
> +
> + /* PSU2 @ 0xB2 */
> + power-supply@59 {
> + compatible = "pmbus";
> + reg = <0x59>;
> + };
> +
> + /* Also connected to:
> + * - PCH SMBUS #1
> + */
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + /* Connected to:
> + * - PCH SMBUS #2
> + */
> +
> + /* Connected via switch to:
> + * - CPU #0 channels ABC VDDQ @ 0x80
> + * - CPU #0 channels DEF VDDQ @ 0x81
> + * - CPU #1 channels ABC VDDQ @ 0x82
> + * - CPU #1 channels DEF VDDQ @ 0x83
> + * - CPU #0 VCCIO & VMCP @ 0x52
> + * - CPU #1 VCCIO & VMCP @ 0x53
> + * - CPU #0 VCCIN @ 0xC0
> + * - CPU #0 VSA @ 0xC2
> + * - CPU #1 VCCIN @ 0xC4
> + * - CPU #1 VSA @ 0xC6
> + * - J110
> + */
> +};
> +
> +&i2c5 {
> + status = "okay";
> +
> + /* Connected via switch (PCH_BMC_SMB_SW_P) to:
> + * - mainboard FRU @ 0xAE
> + * - XDP connector
> + * - ME debug header
> + * - clock buffer @ 0xD8
> + * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
> + * - PCH SMBUS
> + */
> +};
> +
> +&i2c6 {
> + status = "okay";
> +
> + /* Connected via switch (BMC_PE_SMB_EN_1_N) to
> + * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
> + * - 0,0: PCIE slot 1, SMB #1
> + * - 0,1: PCIE slot 1, SMB #2
> + * - 1,0: PCIE slot 2, SMB #1
> + * - 1,1: PCIE slot 2, SMB #2
> + */
> +
> + /* Connected via switch (BMC_PE_SMB_EN_2_N) to
> + * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
> + * - 0,0: OCP0 (A) SMB
> + * - 0,1: OCP0 (C) SMB
> + * - 1,0: OCP1 (A) SMB
> + * - 1,1: NC
> + */
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + /* Connected to:
> + * - PCH SMBUS #4
> + */
> +};
> +
> +&i2c8 {
> + status = "okay";
> +
> + /* Not connected */
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + use-ncsi;
> + no-hw-checksum;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> +};
> +
> +&mac1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&ibt {
> + status = "okay";
> +};
> +
> +&kcs1 {
> + status = "okay";
> + kcs_addr = <0xca8>;
> +};
> +
> +&kcs3 {
> + status = "okay";
> + kcs_addr = <0xca2>;
> +};
> +
> +&gfx {
> + status = "okay";
> + memory-region = <&gfx_memory>;
> +};
> +
> +&gpio {
> + status = "okay";
> + gpio-line-names =
> + /*A0-A7*/ "","","IDLED_N","","","","","",
> + /*B0-B7*/ "","","","","","","","",
> + /*C0-C7*/ "","","","","ID_BUTTON","POST_COMPLETE","","",
> + /*D0-D7*/ "","","PS_PWROK","PLTRST_N","","","","",
> + /*E0-E7*/ "POWER_BUTTON","POWER_OUT","RESET_BUTTON","RESET_OUT",
> + "NMI_BUTTON","NMI_OUT","","HEARTBEAT_LED_N",
> + /*F0-F7*/ "","CLEAR_CMOS_N","","","IPMI_ALERT_LED_N","","","",
> + /*G0-G7*/ "BMC_PE_SMB_EN_1_N","BMC_PE_SMB_EN_2_N","","","","","","",
> + /*H0-H7*/ "","","","","","","","",
> + /*I0-I7*/ "","","","","","","","",
> + /*J0-J7*/ "","","","","","","","",
> + /*K0-K7*/ "","","","","","","","",
> + /*L0-L7*/ "","","","","","","","",
> + /*M0-M7*/ "","","","","","","","",
> + /*N0-N7*/ "","","","","","","","",
> + /*O0-O7*/ "","","","","","","","",
> + /*P0-P7*/ "","","","","","","","",
> + /*Q0-Q7*/ "","","","","BMC_PE_SMB_SW_BIT0","BMC_PE_SMB_SW_BIT1","","",
> + /*R0-R7*/ "","","","","","","","",
> + /*S0-S7*/ "","","","","","","","",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","",
> + /*V0-V7*/ "","","","","","","","",
> + /*W0-W7*/ "","","","","","","","",
> + /*X0-X7*/ "","","","","","","","",
> + /*Y0-Y7*/ "","","","","","","","",
> + /*Z0-Z7*/ "","","","","","","","",
> + /*AA0-AA7*/ "","","","BMC_SMB3_PCH_IE_SML3_EN","","","","",
> + /*AB0-AB7*/ "","","","","","","","";
> +};
> --
> 2.33.0.309.g3052b89438-goog
>
next prev parent reply other threads:[~2021-09-07 23:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-07 20:52 [PATCH linux dev-5.10] ARM: dts: aspeed: Add TYAN S7106 BMC machine Oskar Senft
2021-09-07 23:44 ` Oskar Senft [this message]
2021-09-08 1:14 ` Jeremy Kerr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CABoTLcTTk_wfGbFHrwKrLcKdtpMKqUnt2KijNPvYhpEo_+7M6w@mail.gmail.com \
--to=osk@google.com \
--cc=ed@tanous.net \
--cc=jason.hargis@equuscs.com \
--cc=joel@jms.id.au \
--cc=openbmc@lists.ozlabs.org \
--cc=vijaykhemkalinux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).