* [PATCH] ARM: dts: aspeed: Add device tree for Liwu2 BMC
@ 2021-01-07 3:41 Willie Thai
2021-01-08 3:12 ` Joel Stanley
0 siblings, 1 reply; 8+ messages in thread
From: Willie Thai @ 2021-01-07 3:41 UTC (permalink / raw)
To: openbmc, joel; +Cc: willie
From: willie <willie_thai@compal.com>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts | 605 ++++++++++++++++++++++++++
2 files changed, 607 insertions(+), 1 deletion(-)
create mode 100755 arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5a14adc..8ccb5d3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1381,4 +1381,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-zaius.dtb \
aspeed-bmc-portwell-neptune.dtb \
aspeed-bmc-quanta-q71l.dtb \
- aspeed-bmc-supermicro-x11spi.dtb
+ aspeed-bmc-supermicro-x11spi.dtb \
+ aspeed-bmc-compal-liwu2.dtb
diff --git a/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
new file mode 100755
index 0000000..5882b42
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
@@ -0,0 +1,605 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "AST2500 liwu2";
+ compatible = "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ LED_FAN0_FAULT {
+ label = "LED_FAN0_FAULT";
+ gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+ };
+
+ LED_FAN1_FAULT {
+ label = "LED_FAN1_FAULT";
+ gpios = <&gpio ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ LED_FAN2_FAULT {
+ label = "LED_FAN2_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ LED_FAN3_FAULT {
+ label = "LED_FAN3_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ LED_FAN4_FAULT {
+ label = "LED_FAN4_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ };
+
+ LED_FAN5_FAULT {
+ label = "LED_FAN5_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ FP_LED_STATUS_AMBER_N {
+ label = "FP_LED_STATUS_AMBER_N";
+ gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ REAR_ID_LED_N {
+ label = "REAR_ID_LED_N";
+ gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ FM_SYS_FAN0_PRSNT_D_N {
+ label = "FM_SYS_FAN0_PRSNT_D_N";
+ gpios = <&gpio ASPEED_GPIO(M, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(M, 0)>;
+ };
+
+ FM_SYS_FAN1_PRSNT_D_N {
+ label = "FM_SYS_FAN1_PRSNT_D_N";
+ gpios = <&gpio ASPEED_GPIO(M, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(M, 1)>;
+ };
+
+ FM_SYS_FAN2_PRSNT_D_N {
+ label = "FM_SYS_FAN2_PRSNT_D_N";
+ gpios = <&gpio ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(M, 2)>;
+ };
+
+ FM_SYS_FAN3_PRSNT_D_N {
+ label = "FM_SYS_FAN3_PRSNT_D_N";
+ gpios = <&gpio ASPEED_GPIO(M, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(M, 3)>;
+ };
+
+ FM_SYS_FAN4_PRSNT_D_N {
+ label = "FM_SYS_FAN4_PRSNT_D_N";
+ gpios = <&gpio ASPEED_GPIO(M, 4) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(M, 4)>;
+ };
+
+ FM_SYS_FAN5_PRSNT_D_N {
+ label = "FM_SYS_FAN5_PRSNT_D_N";
+ gpios = <&gpio ASPEED_GPIO(M, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(M, 5)>;
+ };
+
+ FM_SYS_FAN6_PRSNT_D_N {
+ label = "FM_SYS_FAN6_PRSNT_D_N";
+ gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(S, 7)>;
+ };
+
+ FM_SYS_FAN7_PRSNT_D_N {
+ label = "FM_SYS_FAN7_PRSNT_D_N";
+ gpios = <&gpio ASPEED_GPIO(AB, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(AB, 1)>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ // A0-A7
+ BMC_SEL_M2_SATA_PCIE {
+ label = "BMC_SEL_M2_SATA_PCIE";
+ gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(A, 0)>;
+ };
+
+ PD_RMII_BMC_MDC {
+ label = "PD_RMII_BMC_MDC";
+ gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(A, 6)>;
+ };
+
+ PD_RMII_BMC_MDIO {
+ label = "PD_RMII_BMC_MDIO";
+ gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(A, 7)>;
+ };
+ // B0-B7
+ VR_PVCCIN_PVCCSA_CPU1_FAULT_N {
+ label = "VR_PVCCIN_PVCCSA_CPU1_FAULT_N";
+ gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(B, 0)>;
+ };
+
+ VR_PVCCIN_PVCCSA_CPU2_FAULT_N {
+ label = "VR_PVCCIN_PVCCSA_CPU2_FAULT_N";
+ gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(B, 1)>;
+ };
+
+ VR_PVCCIO_CPU1_FAULT_N {
+ label = "VR_PVCCIO_CPU1_FAULT_N";
+ gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(B, 2)>;
+ };
+
+ VR_PVCCIO_CPU2_FAULT_N {
+ label = "VR_PVCCIO_CPU2_FAULT_N";
+ gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(B, 3)>;
+ };
+
+ NC_CLK_48M_USB_NMC_R2 {
+ label = "NC_CLK_48M_USB_NMC_R2";
+ gpios = <&gpio ASPEED_GPIO(B, 4) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(B, 4)>;
+ };
+
+ PU_BMC_GPIOB6 {
+ label = "PU_BMC_GPIOB6";
+ gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(B, 6)>;
+ };
+
+ NC_BMC_GPIOB7 {
+ label = "NC_BMC_GPIOB7";
+ gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(B, 7)>;
+ };
+ // C0-C7
+ PROJECT_REV_ID0 {
+ label = "PROJECT_REV_ID0";
+ gpios = <&gpio ASPEED_GPIO(C, 0) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(C, 0)>;
+ };
+
+ PROJECT_REV_ID1 {
+ label = "PROJECT_REV_ID1";
+ gpios = <&gpio ASPEED_GPIO(C, 1) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(C, 1)>;
+ };
+
+ PROJECT_REV_ID2 {
+ label = "PROJECT_REV_ID2";
+ gpios = <&gpio ASPEED_GPIO(C, 2) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(C, 2)>;
+ };
+
+ PCB_REV_ID0 {
+ label = "PCB_REV_ID0";
+ gpios = <&gpio ASPEED_GPIO(C, 3) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(C, 3)>;
+ };
+
+ PCB_REV_ID1 {
+ label = "PCB_REV_ID1";
+ gpios = <&gpio ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(C, 4)>;
+ };
+
+ PCB_REV_ID2 {
+ label = "PCB_REV_ID2";
+ gpios = <&gpio ASPEED_GPIO(C, 5) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(C, 5)>;
+ };
+
+ NC_BMC_GPIOC6 {
+ label = "NC_BMC_GPIOC6";
+ gpios = <&gpio ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(C, 6)>;
+ };
+
+ NC_BMC_GPIOC7 {
+ label = "NC_BMC_GPIOC7";
+ gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(C, 7)>;
+ };
+ // D0-D7
+ FM_FORCE_BMC_UPDATE_N {
+ label = "FM_FORCE_BMC_UPDATE_N";
+ gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(D, 0)>;
+ };
+
+ RST_RSTB_BMC_R_N {
+ label = "RST_RSTB_BMC_R_N";
+ gpios = <&gpio ASPEED_GPIO(D, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(D, 1)>;
+ };
+
+ NC_BMC_GPIOD2 {
+ label = "NC_BMC_GPIOD2";
+ gpios = <&gpio ASPEED_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(D, 2)>;
+ };
+
+ NC_BMC_GPIOD3 {
+ label = "NC_BMC_GPIOD3";
+ gpios = <&gpio ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(D, 3)>;
+ };
+
+ NC_BMC_GPIOD4 {
+ label = "NC_BMC_GPIOD4";
+ gpios = <&gpio ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(D, 4)>;
+ };
+
+ NC_BMC_GPIOD5 {
+ label = "NC_BMC_GPIOD5";
+ gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(D, 5)>;
+ };
+ };
+
+};
+
+
+&gpio {
+ // A0-A7
+ fm_spd_ddrcpu_lvlshft_en_r {
+ gpio-hog;
+ label = "FM_SPD_DDRCPU_LVLSHFT_EN_R";
+ gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(A, 1)>;
+ output-high;
+ };
+
+ mb_bmc_hbsp_reset_n {
+ gpio-hog;
+ label = "MB_BMC_HBSP_RESET_N";
+ gpios = <ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(A, 2)>;
+ output-high;
+ };
+
+ mb_bmc_hbsp_isp_n {
+ gpio-hog;
+ label = "MB_BMC_HBSP_ISP_N";
+ gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(A, 3)>;
+ output-high;
+ };
+ // D0-D7
+ jtag_pld_en {
+ gpio-hog;
+ label = "JTAG_PLD_EN";
+ gpios = <ASPEED_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(D, 6)>;
+ output-low;
+ };
+ FM_BMC_DBP_PRESENT_R_N {
+ gpio-hog;
+ label = "FM_BMC_DBP_PRESENT_R_N";
+ gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(E, 5)>;
+ output-high;
+ };
+
+ // F0-F7
+ IRQ_BMC_PCH_NMI_R {
+ gpio-hog;
+ label = "IRQ_BMC_PCH_NMI_R";
+ gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(F, 0)>;
+ output-low;
+ };
+
+ FM_CPU2_DISABLE_COD_N {
+ gpio-hog;
+ label = "FM_CPU2_DISABLE_COD_N";
+ gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 1)>;
+ output-high;
+ };
+
+ SPI_SYSBIOS_BMC_SEL {
+ gpio-hog;
+ label = "SPI_SYSBIOS_BMC_SEL";
+ gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 2)>;
+ output-high;
+ };
+ // Q0-Q7
+ FM_BMC_CPU_PWR_DEBUG_R_N {
+ gpio-hog;
+ label = "FM_BMC_CPU_PWR_DEBUG_R_N";
+ gpios = <ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Q, 7)>;
+ output-high;
+ };
+};
+
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&spi2 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ pagesize = <32>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ tmp75@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ tmp75@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ tmp75@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+
+ tmp75@4d {
+ compatible = "ti,tmp75";
+ reg = <0x4d>;
+ };
+
+ vr-controller@5a {
+ compatible = "ti,tps53679";
+ reg = <0x5a>;
+ };
+
+ vr-controller@5d {
+ compatible = "ti,tps53679";
+ reg = <0x5d>;
+ };
+
+ vr-controller@68 {
+ compatible = "ti,tps53679";
+ reg = <0x68>;
+ };
+
+ vr-controller@6a {
+ compatible = "ti,tps53679";
+ reg = <0x6a>;
+ };
+
+ vr-controller@6c {
+ compatible = "ti,tps53679";
+ reg = <0x6c>;
+ };
+
+ vr-controller@6e {
+ compatible = "ti,tps53679";
+ reg = <0x6e>;
+ };
+
+};
+
+&i2c4 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+
+ power-supply@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
+
+ power-supply@59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
+};
+
+
+&sdmmc {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+/*
+ * Enable port A as device (via the virtual hub) and port B as
+ * host by default on the eval board. This can be easily changed
+ * by replacing the override below with &ehci0 { ... } to enable
+ * host on both ports.
+ */
+&vhub {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default
+ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+ };
+
+ fan@6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+ };
+
+ fan@7 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+ };
+
+};
+
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH] ARM: dts: aspeed: Add device tree for Liwu2 BMC
2021-01-07 3:41 [PATCH] ARM: dts: aspeed: Add device tree for Liwu2 BMC Willie Thai
@ 2021-01-08 3:12 ` Joel Stanley
2021-01-11 9:42 ` Willie Thai
0 siblings, 1 reply; 8+ messages in thread
From: Joel Stanley @ 2021-01-08 3:12 UTC (permalink / raw)
To: Willie Thai; +Cc: willie, OpenBMC Maillist
On Thu, 7 Jan 2021 at 03:42, Willie Thai <williethaitu@gmail.com> wrote:
>
> From: willie <willie_thai@compal.com>
Please add a short description of the machine you're adding. Take a
look at the git history for other BMC machines to see what I mean.
>
> ---
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts | 605 ++++++++++++++++++++++++++
> 2 files changed, 607 insertions(+), 1 deletion(-)
> create mode 100755 arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5a14adc..8ccb5d3 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1381,4 +1381,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-opp-zaius.dtb \
> aspeed-bmc-portwell-neptune.dtb \
> aspeed-bmc-quanta-q71l.dtb \
> - aspeed-bmc-supermicro-x11spi.dtb
> + aspeed-bmc-supermicro-x11spi.dtb \
> + aspeed-bmc-compal-liwu2.dtb
This should be sorted alphabetically.
> diff --git a/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> new file mode 100755
> index 0000000..5882b42
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> @@ -0,0 +1,605 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "AST2500 liwu2";
> + compatible = "aspeed,ast2500";
> +
> + aliases {
> + serial4 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gfx_memory: framebuffer {
Are you sure you're using this device? This is the BMC's internal
graphics device, not the one that is attached to the host over PCI. If
you're only using host graphics then you don't need this node.
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + LED_FAN0_FAULT {
> + label = "LED_FAN0_FAULT";
> + gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
> + };
> +
> + LED_FAN1_FAULT {
> + label = "LED_FAN1_FAULT";
> + gpios = <&gpio ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + LED_FAN2_FAULT {
> + label = "LED_FAN2_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + LED_FAN3_FAULT {
> + label = "LED_FAN3_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + LED_FAN4_FAULT {
> + label = "LED_FAN4_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
> + };
> +
> + LED_FAN5_FAULT {
> + label = "LED_FAN5_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
> + };
> +
> + FP_LED_STATUS_AMBER_N {
> + label = "FP_LED_STATUS_AMBER_N";
> + gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + REAR_ID_LED_N {
> + label = "REAR_ID_LED_N";
> + gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + poll-interval = <1000>;
> +
> + FM_SYS_FAN0_PRSNT_D_N {
> + label = "FM_SYS_FAN0_PRSNT_D_N";
> + gpios = <&gpio ASPEED_GPIO(M, 0) GPIO_ACTIVE_LOW>;
The internal GPIO device can generate interrupts, so you don't need to
use gpio-keys-polled, you should be able to use gpio-keys. This should
be fixed before merging your device tree.
Secondly, you shouldn't need to use gpio-keys at all, as you can use
the gpio chardev interface to be notified in userspace when a pin
changes level. This is a mistake that many openbmc systems have made,
so while I recommend you fix your userspace, it will not block the
merging of this patch.
> + linux,code = <ASPEED_GPIO(M, 0)>;
> + };
> +
> + FM_SYS_FAN1_PRSNT_D_N {
> + label = "FM_SYS_FAN1_PRSNT_D_N";
> + gpios = <&gpio ASPEED_GPIO(M, 1) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(M, 1)>;
> + };
> +
> + FM_SYS_FAN2_PRSNT_D_N {
> + label = "FM_SYS_FAN2_PRSNT_D_N";
> + gpios = <&gpio ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(M, 2)>;
> + };
> +
> + FM_SYS_FAN3_PRSNT_D_N {
> + label = "FM_SYS_FAN3_PRSNT_D_N";
> + gpios = <&gpio ASPEED_GPIO(M, 3) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(M, 3)>;
> + };
> +
> + FM_SYS_FAN4_PRSNT_D_N {
> + label = "FM_SYS_FAN4_PRSNT_D_N";
> + gpios = <&gpio ASPEED_GPIO(M, 4) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(M, 4)>;
> + };
> +
> + FM_SYS_FAN5_PRSNT_D_N {
> + label = "FM_SYS_FAN5_PRSNT_D_N";
> + gpios = <&gpio ASPEED_GPIO(M, 5) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(M, 5)>;
> + };
> +
> + FM_SYS_FAN6_PRSNT_D_N {
> + label = "FM_SYS_FAN6_PRSNT_D_N";
> + gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(S, 7)>;
> + };
> +
> + FM_SYS_FAN7_PRSNT_D_N {
> + label = "FM_SYS_FAN7_PRSNT_D_N";
> + gpios = <&gpio ASPEED_GPIO(AB, 1) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(AB, 1)>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + // A0-A7
> + BMC_SEL_M2_SATA_PCIE {
> + label = "BMC_SEL_M2_SATA_PCIE";
> + gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(A, 0)>;
> + };
> +
> + PD_RMII_BMC_MDC {
> + label = "PD_RMII_BMC_MDC";
> + gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(A, 6)>;
> + };
> +
> + PD_RMII_BMC_MDIO {
> + label = "PD_RMII_BMC_MDIO";
> + gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(A, 7)>;
> + };
> + // B0-B7
> + VR_PVCCIN_PVCCSA_CPU1_FAULT_N {
> + label = "VR_PVCCIN_PVCCSA_CPU1_FAULT_N";
> + gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(B, 0)>;
> + };
> +
> + VR_PVCCIN_PVCCSA_CPU2_FAULT_N {
> + label = "VR_PVCCIN_PVCCSA_CPU2_FAULT_N";
> + gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(B, 1)>;
> + };
> +
> + VR_PVCCIO_CPU1_FAULT_N {
> + label = "VR_PVCCIO_CPU1_FAULT_N";
> + gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(B, 2)>;
> + };
> +
> + VR_PVCCIO_CPU2_FAULT_N {
> + label = "VR_PVCCIO_CPU2_FAULT_N";
> + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(B, 3)>;
> + };
> +
> + NC_CLK_48M_USB_NMC_R2 {
> + label = "NC_CLK_48M_USB_NMC_R2";
> + gpios = <&gpio ASPEED_GPIO(B, 4) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(B, 4)>;
> + };
> +
> + PU_BMC_GPIOB6 {
> + label = "PU_BMC_GPIOB6";
> + gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(B, 6)>;
> + };
> +
> + NC_BMC_GPIOB7 {
> + label = "NC_BMC_GPIOB7";
> + gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(B, 7)>;
> + };
> + // C0-C7
> + PROJECT_REV_ID0 {
> + label = "PROJECT_REV_ID0";
> + gpios = <&gpio ASPEED_GPIO(C, 0) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(C, 0)>;
> + };
> +
> + PROJECT_REV_ID1 {
> + label = "PROJECT_REV_ID1";
I'm reading this and wondering why you need to expose the ID pins as a
input event. Are you aware that you can and should read GPIO state
without exposing them as gpio-keys?
> + gpios = <&gpio ASPEED_GPIO(C, 1) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(C, 1)>;
> + };
> +
> + PROJECT_REV_ID2 {
> + label = "PROJECT_REV_ID2";
> + gpios = <&gpio ASPEED_GPIO(C, 2) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(C, 2)>;
> + };
> +
> + PCB_REV_ID0 {
> + label = "PCB_REV_ID0";
> + gpios = <&gpio ASPEED_GPIO(C, 3) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(C, 3)>;
> + };
> +
> + PCB_REV_ID1 {
> + label = "PCB_REV_ID1";
> + gpios = <&gpio ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(C, 4)>;
> + };
> +
> + PCB_REV_ID2 {
> + label = "PCB_REV_ID2";
> + gpios = <&gpio ASPEED_GPIO(C, 5) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(C, 5)>;
> + };
> +
> + NC_BMC_GPIOC6 {
> + label = "NC_BMC_GPIOC6";
> + gpios = <&gpio ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(C, 6)>;
> + };
> +
> + NC_BMC_GPIOC7 {
> + label = "NC_BMC_GPIOC7";
> + gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(C, 7)>;
> + };
> + // D0-D7
> + FM_FORCE_BMC_UPDATE_N {
> + label = "FM_FORCE_BMC_UPDATE_N";
> + gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(D, 0)>;
> + };
> +
> + RST_RSTB_BMC_R_N {
> + label = "RST_RSTB_BMC_R_N";
> + gpios = <&gpio ASPEED_GPIO(D, 1) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(D, 1)>;
> + };
> +
> + NC_BMC_GPIOD2 {
> + label = "NC_BMC_GPIOD2";
> + gpios = <&gpio ASPEED_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(D, 2)>;
> + };
> +
> + NC_BMC_GPIOD3 {
> + label = "NC_BMC_GPIOD3";
> + gpios = <&gpio ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(D, 3)>;
> + };
> +
> + NC_BMC_GPIOD4 {
> + label = "NC_BMC_GPIOD4";
> + gpios = <&gpio ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(D, 4)>;
> + };
> +
> + NC_BMC_GPIOD5 {
> + label = "NC_BMC_GPIOD5";
> + gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(D, 5)>;
> + };
> + };
> +
> +};
> +
> +
> +&gpio {
> + // A0-A7
> + fm_spd_ddrcpu_lvlshft_en_r {
> + gpio-hog;
> + label = "FM_SPD_DDRCPU_LVLSHFT_EN_R";
> + gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(A, 1)>;
I do not think the input code makes any sense for a hog.
> + output-high;
> + };
> +
> + mb_bmc_hbsp_reset_n {
> + gpio-hog;
> + label = "MB_BMC_HBSP_RESET_N";
> + gpios = <ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(A, 2)>;
> + output-high;
> + };
> +
> + mb_bmc_hbsp_isp_n {
> + gpio-hog;
> + label = "MB_BMC_HBSP_ISP_N";
> + gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(A, 3)>;
> + output-high;
> + };
> + // D0-D7
> + jtag_pld_en {
> + gpio-hog;
> + label = "JTAG_PLD_EN";
> + gpios = <ASPEED_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(D, 6)>;
> + output-low;
> + };
> + FM_BMC_DBP_PRESENT_R_N {
> + gpio-hog;
> + label = "FM_BMC_DBP_PRESENT_R_N";
> + gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(E, 5)>;
> + output-high;
> + };
> +
> + // F0-F7
> + IRQ_BMC_PCH_NMI_R {
> + gpio-hog;
> + label = "IRQ_BMC_PCH_NMI_R";
> + gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
> + linux,code = <ASPEED_GPIO(F, 0)>;
> + output-low;
> + };
> +
> + FM_CPU2_DISABLE_COD_N {
> + gpio-hog;
> + label = "FM_CPU2_DISABLE_COD_N";
> + gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 1)>;
> + output-high;
> + };
> +
> + SPI_SYSBIOS_BMC_SEL {
> + gpio-hog;
> + label = "SPI_SYSBIOS_BMC_SEL";
> + gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(F, 2)>;
> + output-high;
> + };
> + // Q0-Q7
> + FM_BMC_CPU_PWR_DEBUG_R_N {
> + gpio-hog;
> + label = "FM_BMC_CPU_PWR_DEBUG_R_N";
> + gpios = <ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(Q, 7)>;
> + output-high;
> + };
> +};
> +
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "pnor";
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&spi2 {
> + status = "okay";
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
> +};
> +
> +&mac1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&adc {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + eeprom@54 {
> + compatible = "atmel,24c64";
> + reg = <0x54>;
> + pagesize = <32>;
The whitespace seems off here.
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + tmp75@48 {
> + compatible = "ti,tmp75";
> + reg = <0x48>;
> + };
> +
> + tmp75@4b {
> + compatible = "ti,tmp75";
> + reg = <0x4b>;
> + };
> +
> + tmp75@4c {
> + compatible = "ti,tmp75";
> + reg = <0x4c>;
> + };
> +
> + tmp75@4d {
> + compatible = "ti,tmp75";
> + reg = <0x4d>;
> + };
> +
> + vr-controller@5a {
> + compatible = "ti,tps53679";
> + reg = <0x5a>;
> + };
> +
> + vr-controller@5d {
> + compatible = "ti,tps53679";
> + reg = <0x5d>;
> + };
> +
> + vr-controller@68 {
> + compatible = "ti,tps53679";
> + reg = <0x68>;
> + };
> +
> + vr-controller@6a {
> + compatible = "ti,tps53679";
> + reg = <0x6a>;
> + };
> +
> + vr-controller@6c {
> + compatible = "ti,tps53679";
> + reg = <0x6c>;
> + };
> +
> + vr-controller@6e {
> + compatible = "ti,tps53679";
> + reg = <0x6e>;
> + };
> +
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + eeprom@51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&i2c6 {
> + status = "okay";
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + power-supply@58 {
> + compatible = "pmbus";
> + reg = <0x58>;
> + };
> +
> + power-supply@59 {
> + compatible = "pmbus";
> + reg = <0x59>;
> + };
> +};
> +
> +
> +&sdmmc {
> + status = "okay";
> +};
> +
> +&sdhci0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sd1_default>;
> +};
> +
> +/*
> + * Enable port A as device (via the virtual hub) and port B as
> + * host by default on the eval board. This can be easily changed
> + * by replacing the override below with &ehci0 { ... } to enable
> + * host on both ports.
This comment is for the eval board, you should remove it.
> + */
> +&vhub {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&uhci {
> + status = "okay";
> +};
> +
> +&gfx {
> + status = "okay";
> + memory-region = <&gfx_memory>;
See my comment about the display device above. You probably don't need
this node.
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> + &pinctrl_pwm2_default &pinctrl_pwm3_default
> + &pinctrl_pwm4_default &pinctrl_pwm5_default
> + &pinctrl_pwm6_default &pinctrl_pwm7_default>;
> +
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
> + };
> +
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
> + };
> +
> + fan@2 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
> + };
> +
> + fan@4 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
> + };
> +
> + fan@5 {
> + reg = <0x05>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
> + };
> +
> + fan@6 {
> + reg = <0x06>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
> + };
> +
> + fan@7 {
> + reg = <0x07>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
> + };
> +
> +};
> +
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH] ARM: dts: aspeed: Add device tree for Liwu2 BMC
2021-01-08 3:12 ` Joel Stanley
@ 2021-01-11 9:42 ` Willie Thai
2021-02-09 12:25 ` Joel Stanley
0 siblings, 1 reply; 8+ messages in thread
From: Willie Thai @ 2021-01-11 9:42 UTC (permalink / raw)
To: joel, openbmc; +Cc: Willie Thai
The Liwu2 is a server platform with an ASPEED AST2500 based BMC.
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts | 320 ++++++++++++++++++++++++++
2 files changed, 321 insertions(+)
create mode 100755 arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5a14adc..16fc64d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1354,6 +1354,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-bytedance-g220a.dtb \
+ aspeed-bmc-compal-liwu2.dts \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
new file mode 100755
index 0000000..a93af32
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "AST2500 liwu2";
+ compatible = "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ LED_FAN0_FAULT {
+ label = "LED_FAN0_FAULT";
+ gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+ };
+
+ LED_FAN1_FAULT {
+ label = "LED_FAN1_FAULT";
+ gpios = <&gpio ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ LED_FAN2_FAULT {
+ label = "LED_FAN2_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ LED_FAN3_FAULT {
+ label = "LED_FAN3_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ LED_FAN4_FAULT {
+ label = "LED_FAN4_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ };
+
+ LED_FAN5_FAULT {
+ label = "LED_FAN5_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ FP_LED_STATUS_AMBER_N {
+ label = "FP_LED_STATUS_AMBER_N";
+ gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ REAR_ID_LED_N {
+ label = "REAR_ID_LED_N";
+ gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&spi2 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ pagesize = <32>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ tmp75@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ tmp75@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ tmp75@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+
+ tmp75@4d {
+ compatible = "ti,tmp75";
+ reg = <0x4d>;
+ };
+
+ vr-controller@5a {
+ compatible = "ti,tps53679";
+ reg = <0x5a>;
+ };
+
+ vr-controller@5d {
+ compatible = "ti,tps53679";
+ reg = <0x5d>;
+ };
+
+ vr-controller@68 {
+ compatible = "ti,tps53679";
+ reg = <0x68>;
+ };
+
+ vr-controller@6a {
+ compatible = "ti,tps53679";
+ reg = <0x6a>;
+ };
+
+ vr-controller@6c {
+ compatible = "ti,tps53679";
+ reg = <0x6c>;
+ };
+
+ vr-controller@6e {
+ compatible = "ti,tps53679";
+ reg = <0x6e>;
+ };
+
+};
+
+&i2c4 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+
+ power-supply@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
+
+ power-supply@59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
+};
+
+
+&sdmmc {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default
+ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+ };
+
+ fan@6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+ };
+
+ fan@7 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+ };
+
+};
+
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH] ARM: dts: aspeed: Add device tree for Liwu2 BMC
2021-01-11 9:42 ` Willie Thai
@ 2021-02-09 12:25 ` Joel Stanley
2021-02-19 7:11 ` [[PATCH linux dev-5.8] ARM: dts: Aspeed: Add Compal's Liwu2 BMC machine] ARM: dts: aspeed: Add device tree for Compal's " Willie Thai
0 siblings, 1 reply; 8+ messages in thread
From: Joel Stanley @ 2021-02-09 12:25 UTC (permalink / raw)
To: Willie Thai; +Cc: Willie Thai, OpenBMC Maillist
On Mon, 11 Jan 2021 at 09:45, Willie Thai <williethaitu@gmail.com> wrote:
>
> The Liwu2 is a server platform with an ASPEED AST2500 based BMC.
You need to have a signed-off-by in your commit message.
Please make sure you run ./scripts/checkpatch.pl on your patch before
sending it.
The patch looks okay; there are some minor issues to fix that I have
mentioned below. Apologies for the delay in reviewing it.
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts | 320 ++++++++++++++++++++++++++
> 2 files changed, 321 insertions(+)
> create mode 100755 arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5a14adc..16fc64d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1354,6 +1354,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-arm-centriq2400-rep.dtb \
> aspeed-bmc-arm-stardragon4800-rep2.dtb \
> aspeed-bmc-bytedance-g220a.dtb \
> + aspeed-bmc-compal-liwu2.dts \
> aspeed-bmc-facebook-cmm.dtb \
> aspeed-bmc-facebook-minipack.dtb \
> aspeed-bmc-facebook-tiogapass.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> new file mode 100755
> index 0000000..a93af32
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> @@ -0,0 +1,320 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "AST2500 liwu2";
> + compatible = "aspeed,ast2500";
> +
> + aliases {
> + serial4 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + LED_FAN0_FAULT {
Node names have lower case.
> + label = "LED_FAN0_FAULT";
> + gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
> + };
> +
> + LED_FAN1_FAULT {
> + label = "LED_FAN1_FAULT";
> + gpios = <&gpio ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + LED_FAN2_FAULT {
> + label = "LED_FAN2_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + LED_FAN3_FAULT {
> + label = "LED_FAN3_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + LED_FAN4_FAULT {
> + label = "LED_FAN4_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
> + };
> +
> + LED_FAN5_FAULT {
> + label = "LED_FAN5_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
> + };
> +
> + FP_LED_STATUS_AMBER_N {
> + label = "FP_LED_STATUS_AMBER_N";
> + gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + REAR_ID_LED_N {
> + label = "REAR_ID_LED_N";
> + gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "pnor";
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&spi2 {
> + status = "okay";
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
> +};
> +
> +&mac1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&adc {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + eeprom@54 {
> + compatible = "atmel,24c64";
> + reg = <0x54>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + tmp75@48 {
> + compatible = "ti,tmp75";
> + reg = <0x48>;
> + };
> +
> + tmp75@4b {
> + compatible = "ti,tmp75";
> + reg = <0x4b>;
> + };
> +
> + tmp75@4c {
> + compatible = "ti,tmp75";
> + reg = <0x4c>;
> + };
> +
> + tmp75@4d {
> + compatible = "ti,tmp75";
> + reg = <0x4d>;
> + };
> +
> + vr-controller@5a {
> + compatible = "ti,tps53679";
> + reg = <0x5a>;
> + };
> +
> + vr-controller@5d {
> + compatible = "ti,tps53679";
> + reg = <0x5d>;
> + };
> +
> + vr-controller@68 {
> + compatible = "ti,tps53679";
> + reg = <0x68>;
> + };
> +
> + vr-controller@6a {
> + compatible = "ti,tps53679";
> + reg = <0x6a>;
> + };
> +
> + vr-controller@6c {
> + compatible = "ti,tps53679";
> + reg = <0x6c>;
> + };
> +
> + vr-controller@6e {
> + compatible = "ti,tps53679";
> + reg = <0x6e>;
> + };
> +
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + eeprom@51 {
> + compatible = "atmel,24c64";
The whitespace looks wrong here.
> + reg = <0x51>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&i2c6 {
> + status = "okay";
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + power-supply@58 {
> + compatible = "pmbus";
> + reg = <0x58>;
> + };
> +
> + power-supply@59 {
> + compatible = "pmbus";
> + reg = <0x59>;
> + };
> +};
> +
> +
> +&sdmmc {
> + status = "okay";
> +};
> +
> +&sdhci0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sd1_default>;
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&uhci {
> + status = "okay";
> +};
> +
> +&gfx {
> + status = "okay";
> + memory-region = <&gfx_memory>;
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> + &pinctrl_pwm2_default &pinctrl_pwm3_default
> + &pinctrl_pwm4_default &pinctrl_pwm5_default
> + &pinctrl_pwm6_default &pinctrl_pwm7_default>;
> +
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
> + };
> +
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
> + };
> +
> + fan@2 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
> + };
> +
> + fan@4 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
> + };
> +
> + fan@5 {
> + reg = <0x05>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
> + };
> +
> + fan@6 {
> + reg = <0x06>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
> + };
> +
> + fan@7 {
> + reg = <0x07>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
> + };
> +
> +};
> +
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 8+ messages in thread* [[PATCH linux dev-5.8] ARM: dts: Aspeed: Add Compal's Liwu2 BMC machine] ARM: dts: aspeed: Add device tree for Compal's Liwu2 BMC
2021-02-09 12:25 ` Joel Stanley
@ 2021-02-19 7:11 ` Willie Thai
2021-03-31 6:33 ` Joel Stanley
2021-04-01 0:31 ` Andrew Jeffery
0 siblings, 2 replies; 8+ messages in thread
From: Willie Thai @ 2021-02-19 7:11 UTC (permalink / raw)
To: joel, openbmc, andrew; +Cc: Willie Thai
The Liwu2 is a server platform with an ASPEED AST2500 based BMC.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: willie_thai@compal.com
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts | 325 ++++++++++++++++++++++++++
2 files changed, 326 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6320124..a67576d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1354,6 +1354,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-bytedance-g220a.dtb \
+ aspeed-bmc-compal-liwu2.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
new file mode 100644
index 0000000..68faf3d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "AST2500 liwu2";
+ compatible = "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_fan0_fault {
+ label = "LED_FAN0_FAULT";
+ gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+ };
+
+ led_fan1_fault {
+ label = "LED_FAN1_FAULT";
+ gpios = <&gpio ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ led_fan2_fault {
+ label = "LED_FAN2_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ led_fan3_fault {
+ label = "LED_FAN3_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ led_fan4_fault {
+ label = "LED_FAN4_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ };
+
+ led_fan5_fault {
+ label = "LED_FAN5_FAULT";
+ gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ fp_led_status_amber_n {
+ label = "FP_LED_STATUS_AMBER_N";
+ gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ rear_id_led_n {
+ label = "REAR_ID_LED_N";
+ gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&spi2 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ pagesize = <32>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ tmp75@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ tmp75@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ tmp75@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+
+ tmp75@4d {
+ compatible = "ti,tmp75";
+ reg = <0x4d>;
+ };
+
+ vr-controller@5a {
+ compatible = "ti,tps53679";
+ reg = <0x5a>;
+ };
+
+ vr-controller@5d {
+ compatible = "ti,tps53679";
+ reg = <0x5d>;
+ };
+
+ vr-controller@68 {
+ compatible = "ti,tps53679";
+ reg = <0x68>;
+ };
+
+ vr-controller@6a {
+ compatible = "ti,tps53679";
+ reg = <0x6a>;
+ };
+
+ vr-controller@6c {
+ compatible = "ti,tps53679";
+ reg = <0x6c>;
+ };
+
+ vr-controller@6e {
+ compatible = "ti,tps53679";
+ reg = <0x6e>;
+ };
+
+};
+
+&i2c4 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+
+ power-supply@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
+
+ power-supply@59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
+};
+
+
+&sdmmc {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+/*
+ * Enable port A as device (via the virtual hub) and port B as
+ * host by default on the eval board. This can be easily changed
+ * by replacing the override below with &ehci0 { ... } to enable
+ * host on both ports.
+ */
+&vhub {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default
+ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+ };
+
+ fan@6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+ };
+
+ fan@7 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+ };
+
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [[PATCH linux dev-5.8] ARM: dts: Aspeed: Add Compal's Liwu2 BMC machine] ARM: dts: aspeed: Add device tree for Compal's Liwu2 BMC
2021-02-19 7:11 ` [[PATCH linux dev-5.8] ARM: dts: Aspeed: Add Compal's Liwu2 BMC machine] ARM: dts: aspeed: Add device tree for Compal's " Willie Thai
@ 2021-03-31 6:33 ` Joel Stanley
2021-04-01 0:31 ` Andrew Jeffery
1 sibling, 0 replies; 8+ messages in thread
From: Joel Stanley @ 2021-03-31 6:33 UTC (permalink / raw)
To: Willie Thai; +Cc: Andrew Jeffery, Willie Thai, OpenBMC Maillist
On Fri, 19 Feb 2021 at 07:11, Willie Thai <williethaitu@gmail.com> wrote:
>
> The Liwu2 is a server platform with an ASPEED AST2500 based BMC.
>
> Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
> Reviewed-by: Joel Stanley <joel@jms.id.au>
I do not recall adding reviewed-by tags. Please don't add them unless
a reviewer has sent them.
> Signed-off-by: willie_thai@compal.com
The format is: Signed-off-by: User Name <user@domain.com>
You can use '-s' when running git commit to add it automatically.
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts | 325 ++++++++++++++++++++++++++
> 2 files changed, 326 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 6320124..a67576d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1354,6 +1354,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-arm-centriq2400-rep.dtb \
> aspeed-bmc-arm-stardragon4800-rep2.dtb \
> aspeed-bmc-bytedance-g220a.dtb \
> + aspeed-bmc-compal-liwu2.dtb \
> aspeed-bmc-facebook-cmm.dtb \
> aspeed-bmc-facebook-minipack.dtb \
> aspeed-bmc-facebook-tiogapass.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> new file mode 100644
> index 0000000..68faf3d
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> @@ -0,0 +1,325 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "AST2500 liwu2";
> + compatible = "aspeed,ast2500";
Add a compatible string for your machine, eg.
compatible = "compal,liwu2-bmc", "aspeed,ast2500";'
> +
> + aliases {
> + serial4 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led_fan0_fault {
> + label = "LED_FAN0_FAULT";
> + gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan1_fault {
> + label = "LED_FAN1_FAULT";
> + gpios = <&gpio ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan2_fault {
> + label = "LED_FAN2_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan3_fault {
> + label = "LED_FAN3_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan4_fault {
> + label = "LED_FAN4_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan5_fault {
> + label = "LED_FAN5_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
> + };
> +
> + fp_led_status_amber_n {
> + label = "FP_LED_STATUS_AMBER_N";
> + gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear_id_led_n {
> + label = "REAR_ID_LED_N";
> + gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "pnor";
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&spi2 {
> + status = "okay";
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
> +};
> +
> +&mac1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&adc {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + eeprom@54 {
> + compatible = "atmel,24c64";
> + reg = <0x54>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + tmp75@48 {
> + compatible = "ti,tmp75";
> + reg = <0x48>;
> + };
> +
> + tmp75@4b {
> + compatible = "ti,tmp75";
> + reg = <0x4b>;
> + };
> +
> + tmp75@4c {
> + compatible = "ti,tmp75";
> + reg = <0x4c>;
> + };
> +
> + tmp75@4d {
> + compatible = "ti,tmp75";
> + reg = <0x4d>;
> + };
> +
> + vr-controller@5a {
> + compatible = "ti,tps53679";
> + reg = <0x5a>;
> + };
> +
> + vr-controller@5d {
> + compatible = "ti,tps53679";
> + reg = <0x5d>;
> + };
> +
> + vr-controller@68 {
> + compatible = "ti,tps53679";
> + reg = <0x68>;
> + };
> +
> + vr-controller@6a {
> + compatible = "ti,tps53679";
> + reg = <0x6a>;
> + };
> +
> + vr-controller@6c {
> + compatible = "ti,tps53679";
> + reg = <0x6c>;
> + };
> +
> + vr-controller@6e {
> + compatible = "ti,tps53679";
> + reg = <0x6e>;
> + };
> +
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + eeprom@51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&i2c6 {
> + status = "okay";
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + power-supply@58 {
> + compatible = "pmbus";
> + reg = <0x58>;
> + };
> +
> + power-supply@59 {
> + compatible = "pmbus";
> + reg = <0x59>;
> + };
> +};
> +
> +
> +&sdmmc {
> + status = "okay";
> +};
> +
> +&sdhci0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sd1_default>;
> +};
> +
> +/*
> + * Enable port A as device (via the virtual hub) and port B as
> + * host by default on the eval board. This can be easily changed
> + * by replacing the override below with &ehci0 { ... } to enable
> + * host on both ports.
This looks like it's cut and pasted from the EVB. Please update or
remove the comment as it applies to your machine.
> + */
> +&vhub {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&uhci {
> + status = "okay";
> +};
> +
> +&gfx {
> + status = "okay";
> + memory-region = <&gfx_memory>;
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> + &pinctrl_pwm2_default &pinctrl_pwm3_default
> + &pinctrl_pwm4_default &pinctrl_pwm5_default
> + &pinctrl_pwm6_default &pinctrl_pwm7_default>;
> +
> + fan@0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
> + };
> +
> + fan@1 {
> + reg = <0x01>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
> + };
> +
> + fan@2 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
> + };
> +
> + fan@3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
> + };
> +
> + fan@4 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
> + };
> +
> + fan@5 {
> + reg = <0x05>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
> + };
> +
> + fan@6 {
> + reg = <0x06>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
> + };
> +
> + fan@7 {
> + reg = <0x07>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
> + };
> +
> +};
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [[PATCH linux dev-5.8] ARM: dts: Aspeed: Add Compal's Liwu2 BMC machine] ARM: dts: aspeed: Add device tree for Compal's Liwu2 BMC
2021-02-19 7:11 ` [[PATCH linux dev-5.8] ARM: dts: Aspeed: Add Compal's Liwu2 BMC machine] ARM: dts: aspeed: Add device tree for Compal's " Willie Thai
2021-03-31 6:33 ` Joel Stanley
@ 2021-04-01 0:31 ` Andrew Jeffery
2021-08-20 2:36 ` [External Mail] Willie_Thai
1 sibling, 1 reply; 8+ messages in thread
From: Andrew Jeffery @ 2021-04-01 0:31 UTC (permalink / raw)
To: Willie Thai, Joel Stanley, openbmc; +Cc: Willie Thai
On Fri, 19 Feb 2021, at 17:41, Willie Thai wrote:
> The Liwu2 is a server platform with an ASPEED AST2500 based BMC.
>
> Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
I don't recall providing my r-b tag.
I have comments below.
> Reviewed-by: Joel Stanley <joel@jms.id.au>
> Signed-off-by: willie_thai@compal.com
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts | 325 ++++++++++++++++++++++++++
> 2 files changed, 326 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 6320124..a67576d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1354,6 +1354,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-arm-centriq2400-rep.dtb \
> aspeed-bmc-arm-stardragon4800-rep2.dtb \
> aspeed-bmc-bytedance-g220a.dtb \
> + aspeed-bmc-compal-liwu2.dtb \
> aspeed-bmc-facebook-cmm.dtb \
> aspeed-bmc-facebook-minipack.dtb \
> aspeed-bmc-facebook-tiogapass.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> new file mode 100644
> index 0000000..68faf3d
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> @@ -0,0 +1,325 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "AST2500 liwu2";
> + compatible = "aspeed,ast2500";
> +
> + aliases {
> + serial4 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led_fan0_fault {
> + label = "LED_FAN0_FAULT";
> + gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan1_fault {
> + label = "LED_FAN1_FAULT";
> + gpios = <&gpio ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan2_fault {
> + label = "LED_FAN2_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan3_fault {
> + label = "LED_FAN3_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan4_fault {
> + label = "LED_FAN4_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan5_fault {
> + label = "LED_FAN5_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
> + };
> +
> + fp_led_status_amber_n {
> + label = "FP_LED_STATUS_AMBER_N";
> + gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear_id_led_n {
> + label = "REAR_ID_LED_N";
> + gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
Should have at least:
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
And then if you need additional chip selects, you should add them too.
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "pnor";
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&spi2 {
> + status = "okay";
Is this necessary given no flash device is defined?
If it is, you also need pinctrl properties.
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
> +};
> +
> +&mac1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&adc {
> + status = "okay";
Given you're using the ADC lines in the iio-hwmon bridge, you need to
request the ADC pins from pinmux here. ADC is the default mux
configuration for the pins, so this will happen to work as is, but
pinmux will not prevent something else from requesting the pins out
from underneath the ADC.
Andrew
^ permalink raw reply [flat|nested] 8+ messages in thread* RE: [External Mail] Re:_[[PATCH_linux_dev-5.8]_ARM:_dts:_Aspeed:_Add_Compal's_Liwu2_BMC_machine]__ARM:_dts:_aspeed:_Add_device_tree_for_Compal's_Liwu2_BMC
2021-04-01 0:31 ` Andrew Jeffery
@ 2021-08-20 2:36 ` Willie_Thai
0 siblings, 0 replies; 8+ messages in thread
From: Willie_Thai @ 2021-08-20 2:36 UTC (permalink / raw)
To: andrew, williethaitu, joel, openbmc
[-- Attachment #1.1: Type: text/html, Size: 9450 bytes --]
[-- Attachment #1.2: Type: text/plain, Size: 5347 bytes --]
Thanks Andrew and Joel,
Our Liwu2 project has stopped, so I will not try committing it any more.
Thank you very much !
-----Original Message-----
From: Andrew Jeffery [mailto:andrew@aj.id.au]
Sent: Thursday, April 1, 2021 8:32 AM
To: Willie Thai; Joel Stanley; openbmc@lists.ozlabs.org
Cc: Thai. Willie (TPE)
Subject: [External Mail] Re:_[[PATCH_linux_dev-5.8]_ARM:_dts:_Aspeed:_Add_Compal's_Liwu2_BMC_machine]__ARM:_dts:_aspeed:_Add_device_tree_for_Compal's_Liwu2_BMC
On Fri, 19 Feb 2021, at 17:41, Willie Thai wrote:
> The Liwu2 is a server platform with an ASPEED AST2500 based BMC.
>
> Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
I don't recall providing my r-b tag.
I have comments below.
> Reviewed-by: Joel Stanley <joel@jms.id.au>
> Signed-off-by: willie_thai@compal.com
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts | 325
++++++++++++++++++++++++++
> 2 files changed, 326 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 6320124..a67576d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1354,6 +1354,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-arm-centriq2400-rep.dtb \
> aspeed-bmc-arm-stardragon4800-rep2.dtb \
> aspeed-bmc-bytedance-g220a.dtb \
> + aspeed-bmc-compal-liwu2.dtb \
> aspeed-bmc-facebook-cmm.dtb \
> aspeed-bmc-facebook-minipack.dtb \
> aspeed-bmc-facebook-tiogapass.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> new file mode 100644
> index 0000000..68faf3d
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-compal-liwu2.dts
> @@ -0,0 +1,325 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "AST2500 liwu2";
> + compatible = "aspeed,ast2500";
> +
> + aliases {
> + serial4 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory@80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led_fan0_fault {
> + label = "LED_FAN0_FAULT";
> + gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan1_fault {
> + label = "LED_FAN1_FAULT";
> + gpios = <&gpio ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan2_fault {
> + label = "LED_FAN2_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan3_fault {
> + label = "LED_FAN3_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan4_fault {
> + label = "LED_FAN4_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
> + };
> +
> + led_fan5_fault {
> + label = "LED_FAN5_FAULT";
> + gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
> + };
> +
> + fp_led_status_amber_n {
> + label = "FP_LED_STATUS_AMBER_N";
> + gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear_id_led_n {
> + label = "REAR_ID_LED_N";
> + gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
Should have at least:
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
And then if you need additional chip selects, you should add them too.
> + flash@0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "pnor";
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&spi2 {
> + status = "okay";
Is this necessary given no flash device is defined?
If it is, you also need pinctrl properties.
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
> +};
> +
> +&mac1 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&adc {
> + status = "okay";
Given you're using the ADC lines in the iio-hwmon bridge, you need to
request the ADC pins from pinmux here. ADC is the default mux
configuration for the pins, so this will happen to work as is, but
pinmux will not prevent something else from requesting the pins out
from underneath the ADC.
Andrew
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-08-20 4:33 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-07 3:41 [PATCH] ARM: dts: aspeed: Add device tree for Liwu2 BMC Willie Thai
2021-01-08 3:12 ` Joel Stanley
2021-01-11 9:42 ` Willie Thai
2021-02-09 12:25 ` Joel Stanley
2021-02-19 7:11 ` [[PATCH linux dev-5.8] ARM: dts: Aspeed: Add Compal's Liwu2 BMC machine] ARM: dts: aspeed: Add device tree for Compal's " Willie Thai
2021-03-31 6:33 ` Joel Stanley
2021-04-01 0:31 ` Andrew Jeffery
2021-08-20 2:36 ` [External Mail] Willie_Thai
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).