openbmc.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Joel Stanley <joel@jms.id.au>
To: Ping Guo <guopingjn@gmail.com>
Cc: Andrew Jeffery <andrew@aj.id.au>,
	OpenBMC Maillist <openbmc@lists.ozlabs.org>,
	guoping@inspur.com, banht@inspur.com, liuxiwei@inspur.com,
	wangxinglong@inspur.com
Subject: Re: [PATCH v4 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine
Date: Fri, 16 Jul 2021 06:40:31 +0000	[thread overview]
Message-ID: <CACPK8XdG0gJs4wNn5RkDZVKj6TqGv75fSsj9Kk1RYYyAov_UEw@mail.gmail.com> (raw)
In-Reply-To: <0d8faa93-cab3-97a2-bc6d-b1359879f744@gmail.com>

On Tue, 13 Jul 2021 at 11:48, Ping Guo <guopingjn@gmail.com> wrote:
>
> Hi Joel,
>
> Thanks for your reviews before.
>
> I want to konw wherther this patch could be merged or there are still
> problems to fix before that.
>
> Please help review this patch again.Thank you!

Reviewed-by: Joel Stanley <joel@jms.id.au>

It looks good now. It will be merged into v5.15. I have also put it in
the openbmc dev-5.10 tree.

>
> On 5/26/21 5:22 PM, guopingjn@gmail.com wrote:
> > From: Ping Guo <guoping@inspur.com>
> >
> > The Inspur NF5280M6 is an x86 platform server with an AST2500-based BMC.
> > This dts file provides a basic configuration for its OpenBMC
> > development.
> >
> > Signed-off-by: George Liu <liuxiwei@inspur.com>
> > Signed-off-by: Ping Guo <guoping@inspur.com>
> > ---
> > changelog:
> > v4:
> > -Remove invalid gpios_property
> > -Remove unused GFX device node
> > -Update KCS binding to the newer style
> > v3:
> > -Remove unnecessary lpc_ctrl node
> > -Remove unnecessary gfx_memory,flash_memory
> > v2:
> > -Remove unavailable uart-clock-high-speed property
> >
> >   arch/arm/boot/dts/Makefile                    |   1 +
> >   .../boot/dts/aspeed-bmc-inspur-nf5280m6.dts   | 691 ++++++++++++++++++
> >   2 files changed, 692 insertions(+)
> >   create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 03b5424bafa8..cc2580f1e99b 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -1405,6 +1405,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> >       aspeed-bmc-ibm-rainier-4u.dtb \
> >       aspeed-bmc-intel-s2600wf.dtb \
> >       aspeed-bmc-inspur-fp5280g2.dtb \
> > +     aspeed-bmc-inspur-nf5280m6.dtb \
> >       aspeed-bmc-lenovo-hr630.dtb \
> >       aspeed-bmc-lenovo-hr855xg2.dtb \
> >       aspeed-bmc-microsoft-olympus.dtb \
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> > new file mode 100644
> > index 000000000000..43eb3f476914
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
> > @@ -0,0 +1,691 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +// Copyright (c) 2021 Inspur Corporation
> > +/dts-v1/;
> > +
> > +#include "aspeed-g5.dtsi"
> > +#include <dt-bindings/gpio/aspeed-gpio.h>
> > +#include <dt-bindings/i2c/i2c.h>
> > +#include <dt-bindings/leds/leds-pca955x.h>
> > +
> > +/ {
> > +     model = "NF5280M6 BMC";
> > +     compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
> > +
> > +     chosen {
> > +             stdout-path = &uart5;
> > +             bootargs = "console=ttyS4,115200 earlyprintk";
> > +     };
> > +
> > +     memory@80000000 {
> > +             reg = <0x80000000 0x40000000>;
> > +     };
> > +
> > +     reserved-memory {
> > +             #address-cells = <1>;
> > +             #size-cells = <1>;
> > +             ranges;
> > +
> > +             vga_memory: framebuffer@9f000000 {
> > +                     no-map;
> > +                     reg = <0x9f000000 0x01000000>; /* 16M */
> > +             };
> > +
> > +             video_engine_memory: jpegbuffer {
> > +                     size = <0x02000000>;    /* 32M */
> > +                     alignment = <0x01000000>;
> > +                     compatible = "shared-dma-pool";
> > +                     reusable;
> > +             };
> > +     };
> > +
> > +     leds {
> > +         compatible = "gpio-leds";
> > +
> > +             bmc_alive {
> > +                     label = "bmc_alive";
> > +                     gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
> > +                     linux,default-trigger = "timer";
> > +                     led-pattern = <1000 1000>;
> > +             };
> > +
> > +             front-fan {
> > +                     label = "front-fan";
> > +                     gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
> > +             };
> > +
> > +         front-psu {
> > +                     label = "front-psu";
> > +                     gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
> > +             };
> > +
> > +         front-syshot {
> > +                     label = "front-syshot";
> > +                     gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
> > +             };
> > +
> > +             front-memory {
> > +                     label = "front-memory";
> > +                     gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
> > +             };
> > +
> > +             identify {
> > +                     label = "identify";
> > +                     gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
> > +             };
> > +     };
> > +
> > +     iio-hwmon {
> > +             compatible = "iio-hwmon";
> > +             io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> > +                     <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> > +                     <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> > +                     <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
> > +     };
> > +};
> > +
> > +&fmc {
> > +     status = "okay";
> > +     flash@0 {
> > +             status = "okay";
> > +             m25p,fast-read;
> > +             label = "bmc";
> > +             spi-max-frequency = <50000000>;
> > +#include "openbmc-flash-layout.dtsi"
> > +     };
> > +};
> > +
> > +&spi1 {
> > +     status = "okay";
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_spi1_default>;
> > +     flash@0 {
> > +             status = "okay";
> > +             m25p,fast-read;
> > +             label = "bios";
> > +             spi-max-frequency = <100000000>;
> > +     };
> > +};
> > +
> > +&uart1 {
> > +     status = "okay";
> > +};
> > +
> > +&uart5 {
> > +     status = "okay";
> > +};
> > +
> > +&mac0 {
> > +     status = "okay";
> > +
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_rmii1_default>;
> > +     clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
> > +             <&syscon ASPEED_CLK_MAC1RCLK>;
> > +     clock-names = "MACCLK", "RCLK";
> > +     use-ncsi;
> > +};
> > +
> > +&mac1 {
> > +     status = "okay";
> > +
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> > +};
> > +
> > +&gpio {
> > +     status = "okay";
> > +     /* Enable GPIOE0 and GPIOE2 pass-through by default */
> > +     pinctrl-names = "pass-through";
> > +     pinctrl-0 = <&pinctrl_gpie0_default
> > +                     &pinctrl_gpie2_default>;
> > +     gpio-line-names =
> > +     /*A0-A7*/       "","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
> > +     /*B0-B7*/       "BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
> > +                             "FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
> > +                             "FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
> > +     /*C0-C7*/       "","","","","","","","",
> > +     /*D0-D7*/       "","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
> > +                             "BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
> > +     /*E0-E7*/       "FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
> > +                             "FM_BOARD_ID4","FM_BOARD_ID5","","",
> > +     /*F0-F7*/       "PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
> > +                             "BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
> > +                             "RST_GLB_RST_WARN_N",
> > +     /*G0-G7*/       "IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
> > +                             "BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
> > +     /*H0-H7*/       "JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
> > +                             "FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
> > +     /*I0-I7*/       "FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
> > +                             "FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
> > +     /*J0-J7*/       "FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
> > +                             "VGA_HSYNC","VGA_VSYNC","","",
> > +     /*K0-K7*/       "","","","","","","","",
> > +     /*L0-L7*/       "","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
> > +     /*M0-M7*/       "","","","","","","","",
> > +     /*N0-N7*/       "","","","","","","","",
> > +     /*O0-O7*/       "","","","","","","","",
> > +     /*P0-P7*/       "","","","","","","","",
> > +     /*Q0-Q7*/       "","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
> > +     /*R0-R7*/       "SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
> > +                             "DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
> > +                             "RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
> > +     /*S0-S7*/       "BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
> > +                             "GPIOS5_BMC","","GPIOS7_BMC",
> > +     /*T0-T7*/       "","","","","","","","",
> > +     /*U0-U7*/       "","","","","","","","",
> > +     /*V0-V7*/       "","","","","","","","",
> > +     /*W0-W7*/       "","","","","","","","",
> > +     /*X0-X7*/       "","","","","","","","",
> > +     /*Y0-Y7*/       "","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
> > +     /*Z0-Z7*/       "XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
> > +                             "GPIOZ5","","",
> > +     /*AA0-AA7*/     "FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
> > +                             "FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
> > +     /*AB0-AB7*/     "RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
> > +     /*AC0-AC7*/     "","","","","","","","";
> > +};
> > +
> > +&i2c0 {
> > +     /* FP_LCD */
> > +     status = "okay";
> > +};
> > +
> > +&i2c1 {
> > +     status = "okay";
> > +
> > +     eeprom@50 {
> > +             compatible = "atmel,24c256";
> > +             reg = <0x50>;
> > +             label = "fru";
> > +     };
> > +};
> > +
> > +&i2c2 {
> > +     status = "okay";
> > +
> > +     tmp112@48 {
> > +             compatible = "ti,tmp112";
> > +             reg = <0x48>;
> > +             label = "inlet";
> > +     };
> > +
> > +     tmp112@49 {
> > +             compatible = "ti,tmp112";
> > +             reg = <0x49>;
> > +             label = "outlet";
> > +     };
> > +
> > +     pca9548@70 {
> > +             compatible = "nxp,pca9548";
> > +             reg = <0x70>;
> > +     };
> > +};
> > +
> > +&i2c3 {
> > +     status = "okay";
> > +
> > +     pca9548@70 {
> > +             compatible = "nxp,pca9548";
> > +             reg = <0x70>;
> > +     };
> > +
> > +     pca9548@71 {
> > +             compatible = "nxp,pca9548";
> > +             reg = <0x71>;
> > +     };
> > +
> > +     pca9548@72 {
> > +             compatible = "nxp,pca9548";
> > +             reg = <0x72>;
> > +     };
> > +};
> > +
> > +&i2c4 {
> > +     /* IPMB */
> > +     status = "okay";
> > +};
> > +
> > +&i2c5 {
> > +     status = "okay";
> > +
> > +     pca9548@70 {
> > +             compatible = "nxp,pca9548";
> > +             reg = <0x70>;
> > +     };
> > +};
> > +
> > +&i2c6 {
> > +     status = "okay";
> > +
> > +     pca9548@70 {
> > +             compatible = "nxp,pca9548";
> > +             reg = <0x70>;
> > +     };
> > +};
> > +
> > +&i2c7 {
> > +     status = "okay";
> > +
> > +     adm1278@33 {
> > +             compatible = "adi,adm1293";
> > +             reg = <0x33>;
> > +     };
> > +
> > +     adm1278@32 {
> > +             compatible = "adi,adm1293";
> > +             reg = <0x32>;
> > +     };
> > +
> > +     adm1278@20 {
> > +             compatible = "adi,adm1293";
> > +             reg = <0x20>;
> > +     };
> > +};
> > +
> > +&i2c8 {
> > +     status = "okay";
> > +
> > +     pca0: pca9555@23 {
> > +             compatible = "nxp,pca9555";
> > +             reg = <0x23>;
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +
> > +             gpio-controller;
> > +             #gpio-cells = <2>;
> > +
> > +             gpio@0 {
> > +                     reg = <0>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@1 {
> > +                     reg = <1>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@2 {
> > +                     reg = <2>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@3 {
> > +                     reg = <3>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@4 {
> > +                     reg = <4>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@5 {
> > +                     reg = <5>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@6 {
> > +                     reg = <6>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +     };
> > +
> > +     pca1: pca9555@22 {
> > +             compatible = "nxp,pca9555";
> > +             reg = <0x22>;
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +
> > +             gpio-controller;
> > +             #gpio-cells = <2>;
> > +
> > +             gpio@0 {
> > +                     reg = <0>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@1 {
> > +                     reg = <1>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@2 {
> > +                     reg = <2>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@3 {
> > +                     reg = <3>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@4 {
> > +                     reg = <4>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@5 {
> > +                     reg = <5>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@6 {
> > +                     reg = <6>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@7 {
> > +                     reg = <7>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +     };
> > +
> > +     pca2: pca9555@20 {
> > +             compatible = "nxp,pca9555";
> > +             reg = <0x20>;
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +
> > +             gpio-controller;
> > +             #gpio-cells = <2>;
> > +
> > +             gpio@0 {
> > +                     reg = <0>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@1 {
> > +                     reg = <1>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@2 {
> > +                     reg = <2>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@3 {
> > +                     reg = <3>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@4 {
> > +                     reg = <4>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@5 {
> > +                     reg = <5>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@6 {
> > +                     reg = <6>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@7 {
> > +                     reg = <7>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +     };
> > +
> > +     pca3: pca9555@21 {
> > +             compatible = "nxp,pca9555";
> > +             reg = <0x21>;
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +
> > +             gpio-controller;
> > +             #gpio-cells = <2>;
> > +
> > +             gpio@0 {
> > +                     reg = <0>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@1 {
> > +                     reg = <1>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@2 {
> > +                     reg = <2>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@3 {
> > +                     reg = <3>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@4 {
> > +                     reg = <4>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@5 {
> > +                     reg = <5>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@6 {
> > +                     reg = <6>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@7 {
> > +                     reg = <7>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +     };
> > +};
> > +
> > +&i2c9 {
> > +     /* cpld */
> > +     status = "okay";
> > +};
> > +
> > +&i2c10 {
> > +     status = "okay";
> > +
> > +     pca4: pca9555@24 {
> > +             compatible = "nxp,pca9555";
> > +             reg = <0x24>;
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +
> > +             gpio-controller;
> > +             #gpio-cells = <2>;
> > +
> > +             gpio@0 {
> > +                     reg = <0>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@1 {
> > +                     reg = <1>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@2 {
> > +                     reg = <2>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@3 {
> > +                     reg = <3>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@4 {
> > +                     reg = <4>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@5 {
> > +                     reg = <5>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@6 {
> > +                     reg = <6>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@7 {
> > +                     reg = <7>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +     };
> > +
> > +     pca5: pca9555@25 {
> > +             compatible = "nxp,pca9555";
> > +             reg = <0x25>;
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +
> > +             gpio-controller;
> > +             #gpio-cells = <2>;
> > +
> > +             gpio@0 {
> > +                     reg = <0>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@1 {
> > +                     reg = <1>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@2 {
> > +                     reg = <2>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@3 {
> > +                     reg = <3>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@4 {
> > +                     reg = <4>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@5 {
> > +                     reg = <5>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +
> > +             gpio@6 {
> > +                     reg = <6>;
> > +                     type = <PCA955X_TYPE_GPIO>;
> > +             };
> > +     };
> > +};
> > +
> > +&i2c11 {
> > +     status = "okay";
> > +
> > +     power-supply@58 {
> > +             compatible = "inspur,ipsps1";
> > +             reg = <0x58>;
> > +     };
> > +
> > +     power-supply@59 {
> > +             compatible = "inspur,ipsps1";
> > +             reg = <0x59>;
> > +     };
> > +};
> > +
> > +&i2c12 {
> > +     status = "okay";
> > +};
> > +
> > +&i2c13 {
> > +     status = "okay";
> > +};
> > +
> > +&pwm_tacho {
> > +     status = "okay";
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> > +             &pinctrl_pwm2_default &pinctrl_pwm3_default
> > +             &pinctrl_pwm4_default &pinctrl_pwm5_default
> > +             &pinctrl_pwm6_default &pinctrl_pwm7_default>;
> > +
> > +     fan@0 {
> > +             reg = <0x00>;
> > +             aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
> > +     };
> > +
> > +     fan@1 {
> > +             reg = <0x01>;
> > +             aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
> > +     };
> > +
> > +     fan@2 {
> > +             reg = <0x02>;
> > +             aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
> > +     };
> > +
> > +     fan@3 {
> > +             reg = <0x03>;
> > +             aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
> > +     };
> > +
> > +     fan@4 {
> > +             reg = <0x04>;
> > +             aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
> > +     };
> > +
> > +     fan@5 {
> > +             reg = <0x05>;
> > +             aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
> > +     };
> > +
> > +     fan@6 {
> > +             reg = <0x06>;
> > +             aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
> > +     };
> > +
> > +     fan@7 {
> > +             reg = <0x07>;
> > +             aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
> > +     };
> > +};
> > +
> > +&kcs3 {
> > +     status = "okay";
> > +     aspeed,lpc-io-reg = <0xca2>;
> > +};
> > +
> > +&kcs4 {
> > +     status = "okay";
> > +     aspeed,lpc-io-reg = <0xca4>;
> > +};
> > +
> > +&adc {
> > +     status = "okay";
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> > +      &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
> > +      &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
> > +      &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
> > +      &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
> > +      &pinctrl_adc14_default &pinctrl_adc15_default>;
> > +};
> > +
> > +&vhub {
> > +     status = "okay";
> > +};
> > +
> > +&video {
> > +     status = "okay";
> > +     memory-region = <&video_engine_memory>;
> > +};
> > +
> > +&vuart {
> > +     status = "okay";
> > +};

      reply	other threads:[~2021-07-16  6:41 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-26  9:22 [PATCH v4 1/1] ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine guopingjn
2021-07-13 11:47 ` Ping Guo
2021-07-16  6:40   ` Joel Stanley [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CACPK8XdG0gJs4wNn5RkDZVKj6TqGv75fSsj9Kk1RYYyAov_UEw@mail.gmail.com \
    --to=joel@jms.id.au \
    --cc=andrew@aj.id.au \
    --cc=banht@inspur.com \
    --cc=guoping@inspur.com \
    --cc=guopingjn@gmail.com \
    --cc=liuxiwei@inspur.com \
    --cc=openbmc@lists.ozlabs.org \
    --cc=wangxinglong@inspur.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).