From: AKASH G J <akashgj91@gmail.com>
To: openbmc@lists.ozlabs.org
Subject: Serial Over Lan (SOL) no login prompt on Linux IRQ mode
Date: Fri, 27 Dec 2019 12:24:28 +0530 [thread overview]
Message-ID: <CAE33tLEsCJtr9VPYj57ZcOe5iWD6282WmrMTr-Hp96Y3rkBzAA@mail.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 752 bytes --]
Hi all,
We are using BMC Aspeed AST-2500 in our motherboard with OpenBMC firmware.
'obmc-console' is used to get host messages over BMC. obmc-console.conf
looks like
*lpc-address = 0x3f8sirq = 4local-tty = ttyS4local-tty-baud = 115200*
BIOS serial redirection is enabled over COM port 0 (*0x3f8, sirq=4,
baudrate=115200*) for super-IO.
we set */dev/ttyS0* in CentOS to work in polling mode by making its *irq=0*
using the following command
$ setserial /dev/ttyS0 uart 16550a irq 0
Now we are getting CentOS login prompt on SOL.
When we change /dev/ttyS0 back to interrupt mode with irq=4, we are not
getting login prompt on SOL.
Whether anything is required to be done in OpenBMC firmware/BIOS to enable
irq mode for SOL ?
Thanks,
Akash
[-- Attachment #2: Type: text/html, Size: 2654 bytes --]
next reply other threads:[~2019-12-27 6:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-27 6:54 AKASH G J [this message]
2019-12-27 7:33 ` Serial Over Lan (SOL) no login prompt on Linux IRQ mode Yong Li
2019-12-30 0:02 ` AKASH G J
2021-07-26 14:36 ` Konstantin Klubnichkin
2021-07-26 14:52 ` Paul Fertser
2021-07-26 16:42 ` Konstantin Klubnichkin
2021-07-26 16:51 ` Paul Fertser
2021-07-27 8:53 ` Konstantin Klubnichkin
2021-07-27 9:30 ` Paul Fertser
2021-11-24 20:33 ` Oskar Senft
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAE33tLEsCJtr9VPYj57ZcOe5iWD6282WmrMTr-Hp96Y3rkBzAA@mail.gmail.com \
--to=akashgj91@gmail.com \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).