Openbmc archive at lore.kernel.org
 help / color / Atom feed
* Update to the xyz.openbmc_project.Dump.Create
@ 2020-10-13  9:47 dhruvaraj S
  0 siblings, 0 replies; only message in thread
From: dhruvaraj S @ 2020-10-13  9:47 UTC (permalink / raw)
  To: openbmc

Hi,

The existing method CreateDump in xyz.openbmc_project.Dump.Create
doesn't accept any parameters. A type of IBM host-specific dump
requires additional parameters to create user-initiated dumps. To
solve this problem extending the existing createDump method to accept
additional parameters in Key, Value pair format. Details available in
the review link

https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-dbus-interfaces/+/37355

Please provide the feedback in case of any impact after changing this method.
---------
Dhruvaraj S

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-13  9:47 Update to the xyz.openbmc_project.Dump.Create dhruvaraj S

Openbmc archive at lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/openbmc/0 openbmc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 openbmc openbmc/ https://lore.kernel.org/openbmc \
		openbmc@lists.ozlabs.org openbmc@ozlabs.org
	public-inbox-index openbmc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.openbmc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git