Openbmc archive at
 help / color / Atom feed
* Service auto start issue in the phosphor-gpio-monitor
@ 2020-10-09 16:23 Manikandan Elumalai
  0 siblings, 0 replies; only message in thread
From: Manikandan Elumalai @ 2020-10-09 16:23 UTC (permalink / raw)
  To: openbmc; +Cc: bradleyb, velumanit, Vijay Khemka

[-- Attachment #1: Type: text/plain, Size: 725 bytes --]

Hi All,

I have added the one line configuration("virtual/obmc-gpio-monitor")
in the package group to add the phosphor-gpio-monitor.

phosphor-multi-gpio-monitor.service not getting started automatically
at boot-up.But can able start this service in the command line.

Is there anything I need to add to start service at boot-up.

Log :
root@yosemitev2:~# systemctl status phosphor-multi-gpio-monitor.service
* phosphor-multi-gpio-monitor.service - Phosphor Multi GPIO monitor
     Loaded: loaded (
    systemd/system/phosphor-multi-gpio-monitor.service ]8;;; static; vendor
preset: enabled)
     Active: inactive (dead)


[-- Attachment #2: Type: text/html, Size: 848 bytes --]

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-09 16:23 Service auto start issue in the phosphor-gpio-monitor Manikandan Elumalai

Openbmc archive at

Archives are clonable:
	git clone --mirror openbmc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 openbmc openbmc/ \
	public-inbox-index openbmc

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone