Hi, I have a question and need your help. The time of bmc has always been UTC time. I set the time zone through the operating system and then reboot bmc. Although the time is no longer 1970, the time is still UTC time. The following steps: 1. From SUT Linux OS # timedatectl set-timezone Asia/Shanghai # hwclock -w # hwclock -r 2021-08-12 23:47:04.936372+08:00 2. Reboot BMC, the BMC will sync the clock with RTC 3. HTTP GET /redfish/v1/Managers/bmc, check DateTime field, "DateTime" = "2021-08-12 15:47:04.936372+00:00" I think it should be when the os time is synced to the bmc, the time zone is not passed, if I want to get the time zone time, do I need to add one under the xyz.openbmc_project.Time.EpochTime interface of the xyz.openbmc_project.Time.Manager service Properties, or are there other ways? root@intel-obmc:~# busctl introspect xyz.openbmc_project.Time.Manager /xyz/openbmc_project/time/bmc NAME TYPE SIGNATURE RESULT/VALUE FLAGS org.freedesktop.DBus.Introspectable interface - - - .Introspect method - s - org.freedesktop.DBus.ObjectManager interface - - - .GetManagedObjects method - a{oa{sa{sv}}} - .InterfacesAdded signal oa{sa{sv}} - - .InterfacesRemoved signal oas - - org.freedesktop.DBus.Peer interface - - - .GetMachineId method - s - .Ping method - - - org.freedesktop.DBus.Properties interface - - - .Get method ss v - .GetAll method s a{sv} - .Set method ssv - - .PropertiesChanged signal sa{sv}as - - xyz.openbmc_project.Time.EpochTime interface - - - .Elapsed property t 1617931946881395 emits-change writable