* IPMI SEL logs from phosphor-logging
@ 2021-06-24 5:20 George Hung (洪忠敬)
2021-06-24 8:50 ` Lei YU
0 siblings, 1 reply; 3+ messages in thread
From: George Hung (洪忠敬) @ 2021-06-24 5:20 UTC (permalink / raw)
To: yulei.sh; +Cc: openbmc, Fran Hsu (徐誌謙), Brandon Kim
Hi Lei,
I enable SEL_LOGGER_SEND_TO_LOGGING_SERVICE option for phosphor-sel-logger and then would generate IPMI SEL logs from phosphor-logging successfully.
But the phosphor-logging still has other events issued from elog function and also put them in the "/var/lib/phosphor-logging/errors" directory.
For example:
00000000 03 00 00 00 03 00 00 00 03 00 00 00 67 ff e6 38 |............g..8|
00000010 7a 01 00 00 32 00 00 00 00 00 00 00 78 79 7a 2e |z...2.......xyz.|
00000020 6f 70 65 6e 62 6d 63 5f 70 72 6f 6a 65 63 74 2e |openbmc_project.|
00000030 43 65 72 74 73 2e 45 72 72 6f 72 2e 49 6e 76 61 |Certs.Error.Inva|
00000040 6c 69 64 43 65 72 74 69 66 69 63 61 74 65 01 00 |lidCertificate..|
00000050 00 00 00 00 00 00 09 00 00 00 00 00 00 00 5f 50 |.............._P|
00000060 49 44 3d 38 37 35 34 00 00 00 00 00 00 00 00 00 |ID=8754.........|
00000070 19 00 00 00 00 00 00 00 76 33 2e 37 2e 30 2d 34 |........v3.7.0-4|
00000080 2d 67 66 32 36 39 36 39 66 64 34 2d 64 69 72 74 |-gf26969fd4-dirt|
00000090 79 67 ff e6 38 7a 01 00 00 |yg..8z...|
00000099
This event type is not IPMI System/OEM SEL, so "ipmitool sel elist" would result in the unspecified error:
# ipmitool sel elist
Get SEL Entry 0 command failed: Unspecified error
Get SEL Entry 0 command failed: Unspecified error
How do you deal with these events that not belong to IPMI SEL logs ?
Thanks.
Best Regards
George Hung
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: IPMI SEL logs from phosphor-logging
2021-06-24 5:20 IPMI SEL logs from phosphor-logging George Hung (洪忠敬)
@ 2021-06-24 8:50 ` Lei YU
2021-06-24 10:32 ` George Hung (洪忠敬)
0 siblings, 1 reply; 3+ messages in thread
From: Lei YU @ 2021-06-24 8:50 UTC (permalink / raw)
To: George Hung (洪忠敬)
Cc: openbmc, yulei.sh, Fran Hsu (徐誌謙), Brandon Kim
On Thu, Jun 24, 2021 at 1:21 PM George Hung (洪忠敬)
<George.Hung@quantatw.com> wrote:
>
> Hi Lei,
>
> I enable SEL_LOGGER_SEND_TO_LOGGING_SERVICE option for phosphor-sel-logger and then would generate IPMI SEL logs from phosphor-logging successfully.
>
> But the phosphor-logging still has other events issued from elog function and also put them in the "/var/lib/phosphor-logging/errors" directory.
>
> For example:
>
> 00000000 03 00 00 00 03 00 00 00 03 00 00 00 67 ff e6 38 |............g..8|
> 00000010 7a 01 00 00 32 00 00 00 00 00 00 00 78 79 7a 2e |z...2.......xyz.|
> 00000020 6f 70 65 6e 62 6d 63 5f 70 72 6f 6a 65 63 74 2e |openbmc_project.|
> 00000030 43 65 72 74 73 2e 45 72 72 6f 72 2e 49 6e 76 61 |Certs.Error.Inva|
> 00000040 6c 69 64 43 65 72 74 69 66 69 63 61 74 65 01 00 |lidCertificate..|
> 00000050 00 00 00 00 00 00 09 00 00 00 00 00 00 00 5f 50 |.............._P|
> 00000060 49 44 3d 38 37 35 34 00 00 00 00 00 00 00 00 00 |ID=8754.........|
> 00000070 19 00 00 00 00 00 00 00 76 33 2e 37 2e 30 2d 34 |........v3.7.0-4|
> 00000080 2d 67 66 32 36 39 36 39 66 64 34 2d 64 69 72 74 |-gf26969fd4-dirt|
> 00000090 79 67 ff e6 38 7a 01 00 00 |yg..8z...|
> 00000099
>
> This event type is not IPMI System/OEM SEL, so "ipmitool sel elist" would result in the unspecified error:
>
> # ipmitool sel elist
> Get SEL Entry 0 command failed: Unspecified error
> Get SEL Entry 0 command failed: Unspecified error
>
> How do you deal with these events that not belong to IPMI SEL logs ?
Such logs are mapped to the system sensor as "Undetermined system
hardware failure".
e.g.
23 | 06/21/2021 | 06:26:35 | System Event #0xf0 | Undetermined
system hardware failure | Asserted
See https://github.com/openbmc/phosphor-host-ipmid/blob/master/selutility.cpp#L365
for details.
So you need to define the inventory sensor of
"/xyz/openbmc_project/inventory/system" in the system's
ipmi-inventory-sensors.yaml, then such events could be mapped to this
inventory if there is no CALLOUT or no SEL metadata in the logging
entry.
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: IPMI SEL logs from phosphor-logging
2021-06-24 8:50 ` Lei YU
@ 2021-06-24 10:32 ` George Hung (洪忠敬)
0 siblings, 0 replies; 3+ messages in thread
From: George Hung (洪忠敬) @ 2021-06-24 10:32 UTC (permalink / raw)
To: Lei YU
Cc: openbmc, yulei.sh, Fran Hsu (徐誌謙), Brandon Kim
Hi Lei,
It can work now.
# ipmitool sel list
1 | 06/24/21 | 10:28:13 UTC | Watchdog2 #0xfb | Hard reset | Asserted
2 | 06/24/21 | 10:29:01 UTC | System Event #0xfe | Undetermined system hardware failure | Asserted
Thanks a lot for your suggestion.
Best Regards
George Hung
>-----Original Message-----
>From: openbmc
><openbmc-bounces+george.hung=quantatw.com@lists.ozlabs.org> On Behalf
>Of Lei YU
>Sent: Thursday, June 24, 2021 4:51 PM
>To: George Hung (洪忠敬) <George.Hung@quantatw.com>
>Cc: openbmc@lists.ozlabs.org; yulei.sh@bytedance.com; Fran Hsu (徐誌謙)
><Fran.Hsu@quantatw.com>; Brandon Kim <brandonkim@google.com>
>Subject: Re: IPMI SEL logs from phosphor-logging
>
>On Thu, Jun 24, 2021 at 1:21 PM George Hung (洪忠敬)
><George.Hung@quantatw.com> wrote:
>>
>> Hi Lei,
>>
>> I enable SEL_LOGGER_SEND_TO_LOGGING_SERVICE option for
>phosphor-sel-logger and then would generate IPMI SEL logs from
>phosphor-logging successfully.
>>
>> But the phosphor-logging still has other events issued from elog function
>and also put them in the "/var/lib/phosphor-logging/errors" directory.
>>
>> For example:
>>
>> 00000000 03 00 00 00 03 00 00 00 03 00 00 00 67 ff e6 38
>|............g..8|
>> 00000010 7a 01 00 00 32 00 00 00 00 00 00 00 78 79 7a 2e
>|z...2.......xyz.|
>> 00000020 6f 70 65 6e 62 6d 63 5f 70 72 6f 6a 65 63 74 2e
>|openbmc_project.|
>> 00000030 43 65 72 74 73 2e 45 72 72 6f 72 2e 49 6e 76 61
>> |Certs.Error.Inva|
>> 00000040 6c 69 64 43 65 72 74 69 66 69 63 61 74 65 01 00
>> |lidCertificate..|
>> 00000050 00 00 00 00 00 00 09 00 00 00 00 00 00 00 5f 50
>> |.............._P|
>> 00000060 49 44 3d 38 37 35 34 00 00 00 00 00 00 00 00 00
>> |ID=8754.........|
>> 00000070 19 00 00 00 00 00 00 00 76 33 2e 37 2e 30 2d 34
>> |........v3.7.0-4|
>> 00000080 2d 67 66 32 36 39 36 39 66 64 34 2d 64 69 72 74
>|-gf26969fd4-dirt|
>> 00000090 79 67 ff e6 38 7a 01 00 00 |yg..8z...|
>> 00000099
>>
>> This event type is not IPMI System/OEM SEL, so "ipmitool sel elist" would
>result in the unspecified error:
>>
>> # ipmitool sel elist
>> Get SEL Entry 0 command failed: Unspecified error Get SEL Entry 0
>> command failed: Unspecified error
>>
>> How do you deal with these events that not belong to IPMI SEL logs ?
>
>Such logs are mapped to the system sensor as "Undetermined system
>hardware failure".
>e.g.
>
> 23 | 06/21/2021 | 06:26:35 | System Event #0xf0 | Undetermined system
>hardware failure | Asserted
>
>See
>https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.c
>om%2Fopenbmc%2Fphosphor-host-ipmid%2Fblob%2Fmaster%2Fselutility.cpp
>%23L365&data=04%7C01%7Cgeorge.hung%40quantatw.com%7Cf68ba01
>df9e346e8e30608d936ed2fa3%7C179b032707fc4973ac738de7313561b2%7C1
>%7C0%7C637601215194095440%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4
>wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&am
>p;sdata=phOO0fROGy4ibYIxmmzeXcE5tNnBKy5oyKft2E4PJAQ%3D&reserv
>ed=0
>for details.
>
>So you need to define the inventory sensor of
>"/xyz/openbmc_project/inventory/system" in the system's
>ipmi-inventory-sensors.yaml, then such events could be mapped to this
>inventory if there is no CALLOUT or no SEL metadata in the logging entry.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-06-24 10:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-24 5:20 IPMI SEL logs from phosphor-logging George Hung (洪忠敬)
2021-06-24 8:50 ` Lei YU
2021-06-24 10:32 ` George Hung (洪忠敬)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).