From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Zev Weiss <zev@bewilderbeest.net>
Cc: linux-aspeed@lists.ozlabs.org,
Konstantin Aladyshev <aladyshev22@gmail.com>,
Andrew Jeffery <andrew@aj.id.au>,
openbmc@lists.ozlabs.org, linux-kernel@vger.kernel.org,
Oskar Senft <osk@google.com>,
linux-serial@vger.kernel.org,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Jiri Slaby <jirislaby@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
Date: Thu, 10 Feb 2022 08:40:42 +0100 [thread overview]
Message-ID: <YgTBennInxX3fE3X@kroah.com> (raw)
In-Reply-To: <20220209203414.23491-1-zev@bewilderbeest.net>
On Wed, Feb 09, 2022 at 12:34:14PM -0800, Zev Weiss wrote:
> Commit 54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to
> set up register mapping") fixed a bug that had, as a side-effect,
> prevented the 8250_aspeed_vuart driver from enabling the VUART's
> FIFOs. However, fixing that (and hence enabling the FIFOs) has in
> turn revealed what appears to be a hardware bug in the ASPEED VUART in
> which the host-side THRE bit doesn't get if the BMC-side receive FIFO
> trigger level is set to anything but one byte. This causes problems
> for polled-mode writes from the host -- for example, Linux kernel
> console writes proceed at a glacial pace (less than 100 bytes per
> second) because the write path waits for a 10ms timeout to expire
> after every character instead of being able to continue on to the next
> character upon seeing THRE asserted. (GRUB behaves similarly.)
>
> As a workaround, introduce a new port type for the ASPEED VUART that's
> identical to PORT_16550A as it had previously been using, but with
> UART_FCR_R_TRIG_00 instead to set the receive FIFO trigger level to
> one byte, which (experimentally) seems to avoid the problematic THRE
> behavior.
>
> Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
> Tested-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Do we need a "Fixes:" tag here as well?
> ---
> drivers/tty/serial/8250/8250_aspeed_vuart.c | 2 +-
> drivers/tty/serial/8250/8250_port.c | 8 ++++++++
> include/uapi/linux/serial_core.h | 3 +++
> 3 files changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
> index 2350fb3bb5e4..c2cecc6f47db 100644
> --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
> +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
> @@ -487,7 +487,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
> port.port.irq = irq_of_parse_and_map(np, 0);
> port.port.handle_irq = aspeed_vuart_handle_irq;
> port.port.iotype = UPIO_MEM;
> - port.port.type = PORT_16550A;
> + port.port.type = PORT_ASPEED_VUART;
> port.port.uartclk = clk;
> port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
> | UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST;
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> index 3b12bfc1ed67..973870ebff69 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -307,6 +307,14 @@ static const struct serial8250_config uart_config[] = {
> .rxtrig_bytes = {1, 32, 64, 112},
> .flags = UART_CAP_FIFO | UART_CAP_SLEEP,
> },
> + [PORT_ASPEED_VUART] = {
> + .name = "ASPEED VUART",
> + .fifo_size = 16,
> + .tx_loadsz = 16,
> + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
> + .rxtrig_bytes = {1, 4, 8, 14},
> + .flags = UART_CAP_FIFO,
> + },
> };
>
> /* Uart divisor latch read */
> diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
> index c4042dcfdc0c..cd11748833e6 100644
> --- a/include/uapi/linux/serial_core.h
> +++ b/include/uapi/linux/serial_core.h
> @@ -274,4 +274,7 @@
> /* Freescale LINFlexD UART */
> #define PORT_LINFLEXUART 122
>
> +/* ASPEED AST2x00 virtual UART */
> +#define PORT_ASPEED_VUART 123
Why does this value have to be in a uapi header file? What userspace
tool is going to need this?
thanks,
greg k-h
next prev parent reply other threads:[~2022-02-10 7:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-09 20:34 [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type Zev Weiss
2022-02-10 7:40 ` Greg Kroah-Hartman [this message]
2022-02-10 7:49 ` Zev Weiss
2022-02-10 8:20 ` Greg Kroah-Hartman
2022-02-10 9:22 ` Zev Weiss
2022-02-10 10:46 ` Greg Kroah-Hartman
2022-02-10 11:11 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YgTBennInxX3fE3X@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=aladyshev22@gmail.com \
--cc=andrew@aj.id.au \
--cc=andriy.shevchenko@linux.intel.com \
--cc=jirislaby@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=osk@google.com \
--cc=zev@bewilderbeest.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).