Openbmc Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/3] Enable pstore for Rainier
@ 2020-10-02  6:34 Andrew Jeffery
  2020-10-02  6:34 ` [PATCH 1/3] ARM: dts: rainier: Add reserved memory for ramoops Andrew Jeffery
                   ` (4 more replies)
  0 siblings, 5 replies; 14+ messages in thread
From: Andrew Jeffery @ 2020-10-02  6:34 UTC (permalink / raw)
  To: joel; +Cc: openbmc

Hello,

This series adds pstore support to the Rainier platform for recovery of oopses
and panics.

Patch 3/3 is a minor cleanup. Only patch 1/3 is a requirement as 2/3 is handled
by the config snippet in the bitbake metadata.

Please review!

Andrew

Andrew Jeffery (3):
  ARM: dts: rainier: Add reserved memory for ramoops
  ARM: config: Enable PSTORE in aspeed_g5_defconfig
  ARM: dts: rainier: Don't shout addresses

 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 12 ++++++++++--
 arch/arm/configs/aspeed_g5_defconfig         |  4 ++++
 2 files changed, 14 insertions(+), 2 deletions(-)

-- 
2.25.1


^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, back to index

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-02  6:34 [PATCH 0/3] Enable pstore for Rainier Andrew Jeffery
2020-10-02  6:34 ` [PATCH 1/3] ARM: dts: rainier: Add reserved memory for ramoops Andrew Jeffery
2020-10-06  3:22   ` Joel Stanley
2020-10-16  3:38     ` Andrew Jeffery
2020-10-06  4:25   ` Milton Miller II
2020-10-06  4:29     ` Andrew Jeffery
2020-10-06  4:44     ` Milton Miller II
2020-10-02  6:34 ` [PATCH 2/3] ARM: config: Enable PSTORE in aspeed_g5_defconfig Andrew Jeffery
2020-10-06  3:51   ` Joel Stanley
2020-10-02  6:34 ` [PATCH 3/3] ARM: dts: rainier: Don't shout addresses Andrew Jeffery
2020-10-06  3:51   ` Joel Stanley
2020-10-02  6:38 ` [PATCH 0/3] Enable pstore for Rainier Andrew Jeffery
2020-10-07  7:21 ` Joel Stanley
2020-10-10  2:50   ` Andrew Jeffery

Openbmc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/openbmc/0 openbmc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 openbmc openbmc/ https://lore.kernel.org/openbmc \
		openbmc@lists.ozlabs.org openbmc@ozlabs.org
	public-inbox-index openbmc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.openbmc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git