From: Bruce Ashfield <bruce.ashfield@gmail.com>
To: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>
Subject: Re: [OE-core] [PATCH 7/7] reproducible: Drop BUILD_REPRODUCIBLE_BINARIES variable
Date: Thu, 14 Oct 2021 08:28:53 -0400 [thread overview]
Message-ID: <CADkTA4MccXdOvzaEoHOX-wVj-iFsLRb7OsDpO+myowr3f0gT=w@mail.gmail.com> (raw)
In-Reply-To: <20211014121025.2913401-7-richard.purdie@linuxfoundation.org>
On Thu, Oct 14, 2021 at 8:10 AM Richard Purdie
<richard.purdie@linuxfoundation.org> wrote:
>
> We want things to be reproduicble and the variable doesn't really change
> much any more. Drop the remaining uses and make those code paths always
> active.
It wasn't clear to me from reading the patch. What is the way that
someone would now get the current timestamp into a kernel build, if
that's the behaviour that they want ?
Bruce
>
> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
> ---
> meta/classes/image-prelink.bbclass | 13 ++-----
> meta/classes/image.bbclass | 14 +++----
> meta/classes/kernel.bbclass | 54 +++++++++++++--------------
> meta/conf/bitbake.conf | 1 -
> meta/lib/oe/sstatesig.py | 2 +-
> meta/recipes-core/busybox/busybox.inc | 10 ++---
> 6 files changed, 41 insertions(+), 53 deletions(-)
>
> diff --git a/meta/classes/image-prelink.bbclass b/meta/classes/image-prelink.bbclass
> index 0da094a5518..8158eeaf4ca 100644
> --- a/meta/classes/image-prelink.bbclass
> +++ b/meta/classes/image-prelink.bbclass
> @@ -46,17 +46,12 @@ prelink_image () {
> dynamic_loader=${@get_linuxloader(d)}
>
> # prelink!
> - if [ "${BUILD_REPRODUCIBLE_BINARIES}" = "1" ]; then
> - bbnote " prelink: BUILD_REPRODUCIBLE_BINARIES..."
> - if [ "$REPRODUCIBLE_TIMESTAMP_ROOTFS" = "" ]; then
> - export PRELINK_TIMESTAMP=`git log -1 --pretty=%ct `
> - else
> - export PRELINK_TIMESTAMP=$REPRODUCIBLE_TIMESTAMP_ROOTFS
> - fi
> - ${STAGING_SBINDIR_NATIVE}/prelink --root ${IMAGE_ROOTFS} -am -N -c ${sysconfdir}/prelink.conf --dynamic-linker $dynamic_loader
> + if [ "$REPRODUCIBLE_TIMESTAMP_ROOTFS" = "" ]; then
> + export PRELINK_TIMESTAMP=`git log -1 --pretty=%ct `
> else
> - ${STAGING_SBINDIR_NATIVE}/prelink --root ${IMAGE_ROOTFS} -amR -N -c ${sysconfdir}/prelink.conf --dynamic-linker $dynamic_loader
> + export PRELINK_TIMESTAMP=$REPRODUCIBLE_TIMESTAMP_ROOTFS
> fi
> + ${STAGING_SBINDIR_NATIVE}/prelink --root ${IMAGE_ROOTFS} -am -N -c ${sysconfdir}/prelink.conf --dynamic-linker $dynamic_loader
>
> # Remove the prelink.conf if we had to add it.
> if [ "$dummy_prelink_conf" = "true" ]; then
> diff --git a/meta/classes/image.bbclass b/meta/classes/image.bbclass
> index c2f32320278..2fa69a40d10 100644
> --- a/meta/classes/image.bbclass
> +++ b/meta/classes/image.bbclass
> @@ -651,17 +651,15 @@ ROOTFS_PREPROCESS_COMMAND += "${@bb.utils.contains('DISTRO_FEATURES', 'usrmerge'
> POPULATE_SDK_PRE_TARGET_COMMAND += "${@bb.utils.contains('DISTRO_FEATURES', 'usrmerge', 'create_merged_usr_symlinks_sdk; ', '',d)}"
>
> reproducible_final_image_task () {
> - if [ "${BUILD_REPRODUCIBLE_BINARIES}" = "1" ]; then
> + if [ "$REPRODUCIBLE_TIMESTAMP_ROOTFS" = "" ]; then
> + REPRODUCIBLE_TIMESTAMP_ROOTFS=`git -C "${COREBASE}" log -1 --pretty=%ct 2>/dev/null` || true
> if [ "$REPRODUCIBLE_TIMESTAMP_ROOTFS" = "" ]; then
> - REPRODUCIBLE_TIMESTAMP_ROOTFS=`git -C "${COREBASE}" log -1 --pretty=%ct 2>/dev/null` || true
> - if [ "$REPRODUCIBLE_TIMESTAMP_ROOTFS" = "" ]; then
> - REPRODUCIBLE_TIMESTAMP_ROOTFS=`stat -c%Y ${@bb.utils.which(d.getVar("BBPATH"), "conf/bitbake.conf")}`
> - fi
> + REPRODUCIBLE_TIMESTAMP_ROOTFS=`stat -c%Y ${@bb.utils.which(d.getVar("BBPATH"), "conf/bitbake.conf")}`
> fi
> - # Set mtime of all files to a reproducible value
> - bbnote "reproducible_final_image_task: mtime set to $REPRODUCIBLE_TIMESTAMP_ROOTFS"
> - find ${IMAGE_ROOTFS} -print0 | xargs -0 touch -h --date=@$REPRODUCIBLE_TIMESTAMP_ROOTFS
> fi
> + # Set mtime of all files to a reproducible value
> + bbnote "reproducible_final_image_task: mtime set to $REPRODUCIBLE_TIMESTAMP_ROOTFS"
> + find ${IMAGE_ROOTFS} -print0 | xargs -0 touch -h --date=@$REPRODUCIBLE_TIMESTAMP_ROOTFS
> }
>
> systemd_preset_all () {
> diff --git a/meta/classes/kernel.bbclass b/meta/classes/kernel.bbclass
> index 4acec1877e0..3dd9b4446db 100644
> --- a/meta/classes/kernel.bbclass
> +++ b/meta/classes/kernel.bbclass
> @@ -324,21 +324,20 @@ addtask bundle_initramfs after do_install before do_deploy
>
> kernel_do_compile() {
> unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
> - if [ "${BUILD_REPRODUCIBLE_BINARIES}" = "1" ]; then
> - # kernel sources do not use do_unpack, so SOURCE_DATE_EPOCH may not
> - # be set....
> - if [ "${SOURCE_DATE_EPOCH}" = "" -o "${SOURCE_DATE_EPOCH}" = "0" ]; then
> - # The source directory is not necessarily a git repository, so we
> - # specify the git-dir to ensure that git does not query a
> - # repository in any parent directory.
> - SOURCE_DATE_EPOCH=`git --git-dir="${S}/.git" log -1 --pretty=%ct 2>/dev/null || echo "${REPRODUCIBLE_TIMESTAMP_ROOTFS}"`
> - fi
> -
> - ts=`LC_ALL=C date -d @$SOURCE_DATE_EPOCH`
> - export KBUILD_BUILD_TIMESTAMP="$ts"
> - export KCONFIG_NOTIMESTAMP=1
> - bbnote "KBUILD_BUILD_TIMESTAMP: $ts"
> + # kernel sources do not use do_unpack, so SOURCE_DATE_EPOCH may not
> + # be set....
> + if [ "${SOURCE_DATE_EPOCH}" = "" -o "${SOURCE_DATE_EPOCH}" = "0" ]; then
> + # The source directory is not necessarily a git repository, so we
> + # specify the git-dir to ensure that git does not query a
> + # repository in any parent directory.
> + SOURCE_DATE_EPOCH=`git --git-dir="${S}/.git" log -1 --pretty=%ct 2>/dev/null || echo "${REPRODUCIBLE_TIMESTAMP_ROOTFS}"`
> fi
> +
> + ts=`LC_ALL=C date -d @$SOURCE_DATE_EPOCH`
> + export KBUILD_BUILD_TIMESTAMP="$ts"
> + export KCONFIG_NOTIMESTAMP=1
> + bbnote "KBUILD_BUILD_TIMESTAMP: $ts"
> +
> # The $use_alternate_initrd is only set from
> # do_bundle_initramfs() This variable is specifically for the
> # case where we are making a second pass at the kernel
> @@ -364,21 +363,20 @@ kernel_do_compile() {
>
> do_compile_kernelmodules() {
> unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
> - if [ "${BUILD_REPRODUCIBLE_BINARIES}" = "1" ]; then
> - # kernel sources do not use do_unpack, so SOURCE_DATE_EPOCH may not
> - # be set....
> - if [ "${SOURCE_DATE_EPOCH}" = "" -o "${SOURCE_DATE_EPOCH}" = "0" ]; then
> - # The source directory is not necessarily a git repository, so we
> - # specify the git-dir to ensure that git does not query a
> - # repository in any parent directory.
> - SOURCE_DATE_EPOCH=`git --git-dir="${S}/.git" log -1 --pretty=%ct 2>/dev/null || echo "${REPRODUCIBLE_TIMESTAMP_ROOTFS}"`
> - fi
> -
> - ts=`LC_ALL=C date -d @$SOURCE_DATE_EPOCH`
> - export KBUILD_BUILD_TIMESTAMP="$ts"
> - export KCONFIG_NOTIMESTAMP=1
> - bbnote "KBUILD_BUILD_TIMESTAMP: $ts"
> + # kernel sources do not use do_unpack, so SOURCE_DATE_EPOCH may not
> + # be set....
> + if [ "${SOURCE_DATE_EPOCH}" = "" -o "${SOURCE_DATE_EPOCH}" = "0" ]; then
> + # The source directory is not necessarily a git repository, so we
> + # specify the git-dir to ensure that git does not query a
> + # repository in any parent directory.
> + SOURCE_DATE_EPOCH=`git --git-dir="${S}/.git" log -1 --pretty=%ct 2>/dev/null || echo "${REPRODUCIBLE_TIMESTAMP_ROOTFS}"`
> fi
> +
> + ts=`LC_ALL=C date -d @$SOURCE_DATE_EPOCH`
> + export KBUILD_BUILD_TIMESTAMP="$ts"
> + export KCONFIG_NOTIMESTAMP=1
> + bbnote "KBUILD_BUILD_TIMESTAMP: $ts"
> +
> if (grep -q -i -e '^CONFIG_MODULES=y$' ${B}/.config); then
> oe_runmake -C ${B} ${PARALLEL_MAKE} modules CC="${KERNEL_CC}" LD="${KERNEL_LD}" ${KERNEL_EXTRA_ARGS}
>
> diff --git a/meta/conf/bitbake.conf b/meta/conf/bitbake.conf
> index 1db9b3fc051..790f2f7a8c4 100644
> --- a/meta/conf/bitbake.conf
> +++ b/meta/conf/bitbake.conf
> @@ -636,7 +636,6 @@ SDE_DIR = "${WORKDIR}/source-date-epoch"
> SDE_FILE = "${SDE_DIR}/__source_date_epoch.txt"
> SDE_DEPLOYDIR = "${WORKDIR}/deploy-source-date-epoch"
>
> -BUILD_REPRODUCIBLE_BINARIES = "1"
> export PYTHONHASHSEED = "0"
> export PERL_HASH_SEED = "0"
> export SOURCE_DATE_EPOCH ?= "${@get_source_date_epoch_value(d)}"
> diff --git a/meta/lib/oe/sstatesig.py b/meta/lib/oe/sstatesig.py
> index c2e3e2f4f58..038404e377a 100644
> --- a/meta/lib/oe/sstatesig.py
> +++ b/meta/lib/oe/sstatesig.py
> @@ -489,7 +489,7 @@ def OEOuthashBasic(path, sigfile, task, d):
> include_timestamps = False
> include_root = True
> if task == "package":
> - include_timestamps = d.getVar('BUILD_REPRODUCIBLE_BINARIES') == '1'
> + include_timestamps = True
> include_root = False
> extra_content = d.getVar('HASHEQUIV_HASH_VERSION')
>
> diff --git a/meta/recipes-core/busybox/busybox.inc b/meta/recipes-core/busybox/busybox.inc
> index 808c3dc7009..622325aabb3 100644
> --- a/meta/recipes-core/busybox/busybox.inc
> +++ b/meta/recipes-core/busybox/busybox.inc
> @@ -110,9 +110,8 @@ python () {
> }
>
> do_prepare_config () {
> - if [ "${BUILD_REPRODUCIBLE_BINARIES}" = "1" ]; then
> - export KCONFIG_NOTIMESTAMP=1
> - fi
> + export KCONFIG_NOTIMESTAMP=1
> +
> sed -e '/CONFIG_STATIC/d' \
> < ${WORKDIR}/defconfig > ${S}/.config
> echo "# CONFIG_STATIC is not set" >> .config
> @@ -143,9 +142,8 @@ do_configure () {
>
> do_compile() {
> unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
> - if [ "${BUILD_REPRODUCIBLE_BINARIES}" = "1" ]; then
> - export KCONFIG_NOTIMESTAMP=1
> - fi
> + export KCONFIG_NOTIMESTAMP=1
> +
> if [ "${BUSYBOX_SPLIT_SUID}" = "1" -a x`grep "CONFIG_FEATURE_INDIVIDUAL=y" .config` = x ]; then
> # split the .config into two parts, and make two busybox binaries
> if [ -e .config.orig ]; then
> --
> 2.32.0
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#156943): https://lists.openembedded.org/g/openembedded-core/message/156943
> Mute This Topic: https://lists.openembedded.org/mt/86310659/1050810
> Group Owner: openembedded-core+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [bruce.ashfield@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
--
- Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end
- "Use the force Harry" - Gandalf, Star Trek II
next prev parent reply other threads:[~2021-10-14 12:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-14 12:10 [PATCH 1/7] reproducible_build: Drop now unneeded compiler warning Richard Purdie
2021-10-14 12:10 ` [PATCH 2/7] reproducible_build: Drop obsolete sstate workaround Richard Purdie
2021-10-14 12:10 ` [PATCH 3/7] reproducible: Move class function code into library Richard Purdie
2021-10-14 12:10 ` [PATCH 4/7] reproducible: Move variable definitions to bitbake.conf Richard Purdie
2021-10-14 12:10 ` [PATCH 5/7] reproducible: Merge code into base.bbclass Richard Purdie
2021-10-14 12:10 ` [PATCH 6/7] python: Update now reproducibile builds are the default Richard Purdie
2021-10-14 12:10 ` [PATCH 7/7] reproducible: Drop BUILD_REPRODUCIBLE_BINARIES variable Richard Purdie
2021-10-14 12:28 ` Bruce Ashfield [this message]
2021-10-14 12:31 ` [OE-core] " Richard Purdie
2021-10-14 12:38 ` Bruce Ashfield
2021-10-14 13:45 ` Alexandre Belloni
2021-10-14 13:46 ` Bruce Ashfield
2021-10-14 15:26 ` Richard Purdie
2021-10-14 16:36 ` [OE-core] [PATCH 1/7] reproducible_build: Drop now unneeded compiler warning Khem Raj
2021-10-14 21:48 ` Richard Purdie
2021-10-14 23:22 ` Khem Raj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CADkTA4MccXdOvzaEoHOX-wVj-iFsLRb7OsDpO+myowr3f0gT=w@mail.gmail.com' \
--to=bruce.ashfield@gmail.com \
--cc=openembedded-core@lists.openembedded.org \
--cc=richard.purdie@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).