[v6,0/3] Stingray thermal driver support
mbox series

Message ID 1546505734-24527-1-git-send-email-srinath.mannam@broadcom.com
Headers show
Series
  • Stingray thermal driver support
Related show

Message

Srinath Mannam Jan. 3, 2019, 8:55 a.m. UTC 
These patches adds the stingray thermal driver and its
corresponding DT nodes with documentation.

Changes from v5
  - Addressed Eduardo Valentin comments.

Changes from v4
  - Addressed Rob Herring comments on DT parameters and
    thermal driver architecture.
  - Removed brcm,max-crit-temp DT parameter
  - Changed driver to thermal sensor registration model.
  - Added trip DT properties.

Changes from v3
  - Addressed Daniel lezcano comments.
  - Elaborated commit description of thermal driver patch.
  - Added brcm,max-crit-temp DT parameter.

Changes from v2:
  - All stingray TMON DT nodes are combine together into single.
    Temperature registers are combined into one mem resource.
    brcm,tmon-mask parameter has available TMONs mask value.
  - All available TMONs are initialized together in single
    instance of driver probe call.

Changes from v1:
  - Fixed auto build sparce warning.

Pramod Kumar (3):
  dt-bindings: thermal: Add binding document for SR thermal
  thermal: broadcom: Add Stingray thermal driver
  arm64: dts: stingray: Add Stingray Thermal DT support.

 .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
 drivers/thermal/Kconfig                            |   3 +-
 drivers/thermal/broadcom/Kconfig                   |   9 ++
 drivers/thermal/broadcom/Makefile                  |   1 +
 drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
 6 files changed, 328 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
 create mode 100644 drivers/thermal/broadcom/sr-thermal.c

Comments

Ray Jui Feb. 5, 2019, 12:16 a.m. UTC | #1 
Hi Zhang/Eduardo,

Can this patch series be merged? It looks like Srinath has addressed all
review comments?

The following tag should be added to the binding document patch:

Reviewed-by: Rob Herring <robh@kernel.org>

Thanks,

Ray

On 1/3/2019 12:55 AM, Srinath Mannam wrote:
> These patches adds the stingray thermal driver and its
> corresponding DT nodes with documentation.
> 
> Changes from v5
>   - Addressed Eduardo Valentin comments.
> 
> Changes from v4
>   - Addressed Rob Herring comments on DT parameters and
>     thermal driver architecture.
>   - Removed brcm,max-crit-temp DT parameter
>   - Changed driver to thermal sensor registration model.
>   - Added trip DT properties.
> 
> Changes from v3
>   - Addressed Daniel lezcano comments.
>   - Elaborated commit description of thermal driver patch.
>   - Added brcm,max-crit-temp DT parameter.
> 
> Changes from v2:
>   - All stingray TMON DT nodes are combine together into single.
>     Temperature registers are combined into one mem resource.
>     brcm,tmon-mask parameter has available TMONs mask value.
>   - All available TMONs are initialized together in single
>     instance of driver probe call.
> 
> Changes from v1:
>   - Fixed auto build sparce warning.
> 
> Pramod Kumar (3):
>   dt-bindings: thermal: Add binding document for SR thermal
>   thermal: broadcom: Add Stingray thermal driver
>   arm64: dts: stingray: Add Stingray Thermal DT support.
> 
>  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
>  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
>  drivers/thermal/Kconfig                            |   3 +-
>  drivers/thermal/broadcom/Kconfig                   |   9 ++
>  drivers/thermal/broadcom/Makefile                  |   1 +
>  drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
>  6 files changed, 328 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
>
Eduardo Valentin Feb. 5, 2019, 11:58 p.m. UTC | #2 
Hello,

On Mon, Feb 04, 2019 at 04:16:19PM -0800, Ray Jui wrote:
> Hi Zhang/Eduardo,
> 
> Can this patch series be merged? It looks like Srinath has addressed all
> review comments?

I will take a look. Side note, thermal patches are reviewed on
linux-pm@vger.kernel.org. Copying that list it does help because that
is how the patches get assigned in patchwork.kernel.org.

> 
> The following tag should be added to the binding document patch:
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> 
> Thanks,
> 
> Ray
> 
> On 1/3/2019 12:55 AM, Srinath Mannam wrote:
> > These patches adds the stingray thermal driver and its
> > corresponding DT nodes with documentation.
> > 
> > Changes from v5
> >   - Addressed Eduardo Valentin comments.
> > 
> > Changes from v4
> >   - Addressed Rob Herring comments on DT parameters and
> >     thermal driver architecture.
> >   - Removed brcm,max-crit-temp DT parameter
> >   - Changed driver to thermal sensor registration model.
> >   - Added trip DT properties.
> > 
> > Changes from v3
> >   - Addressed Daniel lezcano comments.
> >   - Elaborated commit description of thermal driver patch.
> >   - Added brcm,max-crit-temp DT parameter.
> > 
> > Changes from v2:
> >   - All stingray TMON DT nodes are combine together into single.
> >     Temperature registers are combined into one mem resource.
> >     brcm,tmon-mask parameter has available TMONs mask value.
> >   - All available TMONs are initialized together in single
> >     instance of driver probe call.
> > 
> > Changes from v1:
> >   - Fixed auto build sparce warning.
> > 
> > Pramod Kumar (3):
> >   dt-bindings: thermal: Add binding document for SR thermal
> >   thermal: broadcom: Add Stingray thermal driver
> >   arm64: dts: stingray: Add Stingray Thermal DT support.
> > 
> >  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
> >  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
> >  drivers/thermal/Kconfig                            |   3 +-
> >  drivers/thermal/broadcom/Kconfig                   |   9 ++
> >  drivers/thermal/broadcom/Makefile                  |   1 +
> >  drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
> >  6 files changed, 328 insertions(+), 1 deletion(-)
> >  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
> >  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
> >
Srinath Mannam Feb. 15, 2019, 4:20 a.m. UTC | #3 
Hi Eduardo,

Could you please provide your review comments?

Regards,
Srinath.

On Wed, Feb 6, 2019 at 5:28 AM Eduardo Valentin <edubezval@gmail.com> wrote:
>
> Hello,
>
> On Mon, Feb 04, 2019 at 04:16:19PM -0800, Ray Jui wrote:
> > Hi Zhang/Eduardo,
> >
> > Can this patch series be merged? It looks like Srinath has addressed all
> > review comments?
>
> I will take a look. Side note, thermal patches are reviewed on
> linux-pm@vger.kernel.org. Copying that list it does help because that
> is how the patches get assigned in patchwork.kernel.org.
>
> >
> > The following tag should be added to the binding document patch:
> >
> > Reviewed-by: Rob Herring <robh@kernel.org>
> >
> > Thanks,
> >
> > Ray
> >
> > On 1/3/2019 12:55 AM, Srinath Mannam wrote:
> > > These patches adds the stingray thermal driver and its
> > > corresponding DT nodes with documentation.
> > >
> > > Changes from v5
> > >   - Addressed Eduardo Valentin comments.
> > >
> > > Changes from v4
> > >   - Addressed Rob Herring comments on DT parameters and
> > >     thermal driver architecture.
> > >   - Removed brcm,max-crit-temp DT parameter
> > >   - Changed driver to thermal sensor registration model.
> > >   - Added trip DT properties.
> > >
> > > Changes from v3
> > >   - Addressed Daniel lezcano comments.
> > >   - Elaborated commit description of thermal driver patch.
> > >   - Added brcm,max-crit-temp DT parameter.
> > >
> > > Changes from v2:
> > >   - All stingray TMON DT nodes are combine together into single.
> > >     Temperature registers are combined into one mem resource.
> > >     brcm,tmon-mask parameter has available TMONs mask value.
> > >   - All available TMONs are initialized together in single
> > >     instance of driver probe call.
> > >
> > > Changes from v1:
> > >   - Fixed auto build sparce warning.
> > >
> > > Pramod Kumar (3):
> > >   dt-bindings: thermal: Add binding document for SR thermal
> > >   thermal: broadcom: Add Stingray thermal driver
> > >   arm64: dts: stingray: Add Stingray Thermal DT support.
> > >
> > >  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
> > >  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
> > >  drivers/thermal/Kconfig                            |   3 +-
> > >  drivers/thermal/broadcom/Kconfig                   |   9 ++
> > >  drivers/thermal/broadcom/Makefile                  |   1 +
> > >  drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
> > >  6 files changed, 328 insertions(+), 1 deletion(-)
> > >  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
> > >  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
> > >
Florian Fainelli March 8, 2019, 6:44 p.m. UTC | #4 
On 2/14/19 8:20 PM, Srinath Mannam wrote:
> Hi Eduardo,
> 
> Could you please provide your review comments?

So it sounds like this driver was included in a pull request to Linus
for 5.1 [1], although I did not see a response to that patch series,
which would have helped synchronize the Device Tree changes and send
them to Linus as well... I will see if the ARM SoC folks will accept a
late request, most likely they would not.

Eduardo, can you include replies to patches when you applies those to
your tree that way we know whether/when to take the corresponding DTS
changes? Thank you.

[1]:
https://git.kernel.org/torvalds/c/9f24a81e2e5daf8820c8654afcd8512e797c41f2

> 
> Regards,
> Srinath.
> 
> On Wed, Feb 6, 2019 at 5:28 AM Eduardo Valentin <edubezval@gmail.com> wrote:
>>
>> Hello,
>>
>> On Mon, Feb 04, 2019 at 04:16:19PM -0800, Ray Jui wrote:
>>> Hi Zhang/Eduardo,
>>>
>>> Can this patch series be merged? It looks like Srinath has addressed all
>>> review comments?
>>
>> I will take a look. Side note, thermal patches are reviewed on
>> linux-pm@vger.kernel.org. Copying that list it does help because that
>> is how the patches get assigned in patchwork.kernel.org.
>>
>>>
>>> The following tag should be added to the binding document patch:
>>>
>>> Reviewed-by: Rob Herring <robh@kernel.org>
>>>
>>> Thanks,
>>>
>>> Ray
>>>
>>> On 1/3/2019 12:55 AM, Srinath Mannam wrote:
>>>> These patches adds the stingray thermal driver and its
>>>> corresponding DT nodes with documentation.
>>>>
>>>> Changes from v5
>>>>   - Addressed Eduardo Valentin comments.
>>>>
>>>> Changes from v4
>>>>   - Addressed Rob Herring comments on DT parameters and
>>>>     thermal driver architecture.
>>>>   - Removed brcm,max-crit-temp DT parameter
>>>>   - Changed driver to thermal sensor registration model.
>>>>   - Added trip DT properties.
>>>>
>>>> Changes from v3
>>>>   - Addressed Daniel lezcano comments.
>>>>   - Elaborated commit description of thermal driver patch.
>>>>   - Added brcm,max-crit-temp DT parameter.
>>>>
>>>> Changes from v2:
>>>>   - All stingray TMON DT nodes are combine together into single.
>>>>     Temperature registers are combined into one mem resource.
>>>>     brcm,tmon-mask parameter has available TMONs mask value.
>>>>   - All available TMONs are initialized together in single
>>>>     instance of driver probe call.
>>>>
>>>> Changes from v1:
>>>>   - Fixed auto build sparce warning.
>>>>
>>>> Pramod Kumar (3):
>>>>   dt-bindings: thermal: Add binding document for SR thermal
>>>>   thermal: broadcom: Add Stingray thermal driver
>>>>   arm64: dts: stingray: Add Stingray Thermal DT support.
>>>>
>>>>  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
>>>>  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
>>>>  drivers/thermal/Kconfig                            |   3 +-
>>>>  drivers/thermal/broadcom/Kconfig                   |   9 ++
>>>>  drivers/thermal/broadcom/Makefile                  |   1 +
>>>>  drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
>>>>  6 files changed, 328 insertions(+), 1 deletion(-)
>>>>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>>>>  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
>>>>