[PATCHv5,0/3] QCOM smmu-500 wait-for-safe handling for sdm845
mbox series

Message ID cover.1568549745.git.saiprakash.ranjan@codeaurora.org
Headers show
Series
  • QCOM smmu-500 wait-for-safe handling for sdm845
Related show

Message

Sai Prakash Ranjan Sept. 15, 2019, 12:35 p.m. UTC
Previous version of the patches are at [1]:

QCOM's implementation of smmu-500 on sdm845 adds a hardware logic called
wait-for-safe. This logic helps in meeting the invalidation requirements
from 'real-time clients', such as display and camera. This wait-for-safe
logic ensures that the invalidations happen after getting an ack from these
devices.
In this patch-series we are disabling this wait-for-safe logic from the
arm-smmu driver's probe as with this enabled the hardware tries to
throttle invalidations from 'non-real-time clients', such as USB and UFS.

For detailed information please refer to patch [3/4] in this series.
I have included the device tree patch too in this series for someone who
would like to test out this. Here's a branch [2] that gets display on MTP
SDM845 device.

This patch series is inspired from downstream work to handle under-performance
issues on real-time clients on sdm845. In downstream we add separate page table
ops to handle TLB maintenance and toggle wait-for-safe in tlb_sync call so that
achieve required performance for display and camera [3, 4].

Changes since v4:
 * Addressed Stephen's comments.
 * Moved QCOM specific implementation to arm-smmu-qcom.c as per Robin's suggestion.

Changes since v3:
 * Based on arm-smmu implementation cleanup series [5] by Robin Murphy which is
   already merged in Will's tree [6].
 * Implemented the sdm845 specific reset hook which does arm_smmu_device_reset()
   followed by making SCM call to disable the wait-for-safe logic.
 * Removed depedency for SCM call on any dt flag. We invariably try to disable
   the wait-for-safe logic on sdm845. The platforms such as mtp845, and db845
   that implement handlers for this particular SCM call should be able disable
   wait-for-safe logic.
   Other platforms such as cheza don't enable the wait-for-safe logic at all
   from their bootloaders. So there's no need to disable the same.
 * No change in SCM call patches 1 & 2.

Changes since v2:
 * Dropped the patch to add atomic io_read/write scm API.
 * Removed support for any separate page table ops to handle wait-for-safe.
   Currently just disabling this wait-for-safe logic from arm_smmu_device_probe()
   to achieve performance on USB/UFS on sdm845.
 * Added a device tree patch to add smmu option for fw-implemented support
   for SCM call to take care of SAFE toggling.

Changes since v1:
 * Addressed Will and Robin's comments:
    - Dropped the patch[4] that forked out __arm_smmu_tlb_inv_range_nosync(),
      and __arm_smmu_tlb_sync().
    - Cleaned up the errata patch further to use downstream polling mechanism
      for tlb sync.
 * No change in SCM call patches - patches 1 to 3.

[1] https://patchwork.kernel.org/cover/11110643/
[2] https://github.com/vivekgautam1/linux/tree/v5.2-rc4/sdm845-display-working
[3] https://source.codeaurora.org/quic/la/kernel/msm-4.9/commit/drivers/iommu/arm-smmu.c?h=CogSystems-msm-49/msm-4.9&id=da765c6c75266b38191b38ef086274943f353ea7
[4] https://source.codeaurora.org/quic/la/kernel/msm-4.9/commit/drivers/iommu/arm-smmu.c?h=CogSystems-msm-49/msm-4.9&id=8696005aaaf745de68f57793c1a534a34345c30a
[5] https://patchwork.kernel.org/patch/11096265/
[6] https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/

Vivek Gautam (3):
  firmware: qcom_scm-64: Add atomic version of qcom_scm_call
  firmware/qcom_scm: Add scm call to handle smmu errata
  iommu: arm-smmu-impl: Add sdm845 implementation hook

 drivers/firmware/qcom_scm-32.c |   5 ++
 drivers/firmware/qcom_scm-64.c | 152 +++++++++++++++++++++++----------
 drivers/firmware/qcom_scm.c    |   6 ++
 drivers/firmware/qcom_scm.h    |   5 ++
 drivers/iommu/Makefile         |   2 +-
 drivers/iommu/arm-smmu-impl.c  |   7 +-
 drivers/iommu/arm-smmu-qcom.c  |  32 +++++++
 drivers/iommu/arm-smmu-qcom.h  |  11 +++
 drivers/iommu/arm-smmu.h       |   2 +
 include/linux/qcom_scm.h       |   2 +
 10 files changed, 177 insertions(+), 47 deletions(-)
 create mode 100644 drivers/iommu/arm-smmu-qcom.c
 create mode 100644 drivers/iommu/arm-smmu-qcom.h