[v5,00/13] Add device tree support for sc7180
mbox series

Message ID 20191108092824.9773-1-rnayak@codeaurora.org
Headers show
Series
  • Add device tree support for sc7180
Related show

Message

Rajendra Nayak Nov. 8, 2019, 9:28 a.m. UTC
Bjorn/Andy, this patch series is now fairly reviewed and ack'ed,
and given the dependent gcc patches (dt bindings header dependency
for dts) have now landed in clk-next, can we pull these in as part
of your second PR for 5.5?

Changes in v5:
* Dropped the arm-smmu binding update patch, pulled in by Rob H
* Updated 1/13 to also sort SoC and board names
* Dropped clock-output-names for sleep_clk
* Dropped the label for rsc node

Changes in v4:
* Rebased on top of Rob;s for-next
* reorderd patches to take care of pdc dependency
* Updated pdc binding to use a soc specific and soc independent compatible
* Other updates based on v3 feedback, changes listed in each patch

Changes in v3:
* PATCH 2/11: Updated the qup and uart lables to be consistent
with the naming convention followed in sdm845 as suggested
by Matthias
* Dropped 2 patches from v2 which added the new compatible and
binding updates for sc7180 pdc and reused sdm845 compatible instead
as suggested by Marc Z

This series adds DT support for basic peripherals on qualcomm's sc7180 SoC,
drivers for which are already upstream.

Kiran Gunda (3):
  arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device
  arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
  arm64: dts: qcom: sc7180-idp: Add RPMh regulators

Maulik Shah (3):
  arm64: dts: qcom: sc7180: Add cmd_db reserved area
  arm64: dts: qcom: sc7180: Add rpmh-rsc node
  arm64: dts: qcom: sc7180: Add pdc interrupt controller

Rajendra Nayak (4):
  dt-bindings: qcom: Add SC7180 bindings
  arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc
  drivers: irqchip: qcom-pdc: Move to an SoC independent compatible
  dt-bindings: qcom,pdc: Add compatible for sc7180

Roja Rani Yarubandi (1):
  arm64: dts: sc7180: Add qupv3_0 and qupv3_1

Taniya Das (1):
  arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver

Vivek Gautam (1):
  arm64: dts: sc7180: Add device node for apps_smmu

 .../devicetree/bindings/arm/qcom.yaml         |   44 +-
 .../interrupt-controller/qcom,pdc.txt         |    3 +-
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 arch/arm64/boot/dts/qcom/pm6150.dtsi          |   72 ++
 arch/arm64/boot/dts/qcom/pm6150l.dtsi         |   31 +
 arch/arm64/boot/dts/qcom/sc7180-idp.dts       |  402 ++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi          | 1131 +++++++++++++++++
 drivers/irqchip/qcom-pdc.c                    |    2 +-
 8 files changed, 1665 insertions(+), 21 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180.dtsi