[v3,0/2] SPI bus multiplexing
mbox series

Message ID 20200127210415.5708-1-chris.packham@alliedtelesis.co.nz
Headers show
  • SPI bus multiplexing
Related show


Chris Packham Jan. 27, 2020, 9:04 p.m. UTC
This is a revisit of two earlier efforts to add more complex mutliplexing to
SPI busses.


This version makes use of the general purpose mux controller which simplifies
things greatly.

One outstanding problem is the need for the spi-max-frequency on the mux
device. This is not used for anything and is just needed to satisfy the spi
driver infrastructure which expects all spi devices to have this property.

Chris Packham (2):
  dt-bindings: spi: Document binding for generic SPI multiplexer
  spi: Add generic SPI multiplexer

 .../devicetree/bindings/spi/spi-mux.yaml      |  89 +++++++++
 drivers/spi/Kconfig                           |  12 ++
 drivers/spi/Makefile                          |   1 +
 drivers/spi/spi-mux.c                         | 189 ++++++++++++++++++
 4 files changed, 291 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-mux.yaml
 create mode 100644 drivers/spi/spi-mux.c