[v2,0/2] PCI: Add new UniPhier PCIe endpoint driver
mbox series

Message ID 1584604449-13461-1-git-send-email-hayashi.kunihiko@socionext.com
Headers show
Series
  • PCI: Add new UniPhier PCIe endpoint driver
Related show

Message

Kunihiko Hayashi March 19, 2020, 7:54 a.m. UTC
This series adds PCIe endpoint controller driver for Socionext UniPhier
SoCs. This controller is based on the DesignWare PCIe core. This driver
supports Pro5 SoC.

Changes since v1:
- dt-bindings: Add Reviewed-by line
- Fix register value to set EP mode
- Add error message when failed to get phy
- Replace INTX assertion time with macro

Kunihiko Hayashi (2):
  dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
  PCI: uniphier: Add UniPhier PCIe endpoint controller support

 .../devicetree/bindings/pci/uniphier-pcie-ep.txt   |  47 +++
 MAINTAINERS                                        |   4 +-
 drivers/pci/controller/dwc/Kconfig                 |  13 +-
 drivers/pci/controller/dwc/Makefile                |   1 +
 drivers/pci/controller/dwc/pcie-uniphier-ep.c      | 405 +++++++++++++++++++++
 5 files changed, 466 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/uniphier-pcie-ep.txt
 create mode 100644 drivers/pci/controller/dwc/pcie-uniphier-ep.c