[0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw
mbox series

Message ID 20200904233830.11370-1-grygorii.strashko@ti.com
Headers show
Series
  • arm64: dts: ti: k3-j7200: add dma and mcu cpsw
Related show

Message

Grygorii Strashko Sept. 4, 2020, 11:38 p.m. UTC
Hi All,

arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes

This series adds DT nodes for TI J7200 SoC
- INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible
  with J721E Soc, to enable DMA support
- MCU CPSW2g DT nodes to enable networking

This series depends on:
 - [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1]
   from: Lokesh Vutla <lokeshvutla@ti.com>
 - [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2]
   from: Peter Ujfalusi <peter.ujfalusi@ti.com>

[1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@ti.com/T/#m141ae4d0dd818518c00c81806d689983d6e832e6
[2] https://lore.kernel.org/patchwork/patch/1283230/

Grygorii Strashko (3):
  arm64: dts: ti: k3-j7200-main: add main navss cpts node
  arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
  arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux
    and phy defs

Peter Ujfalusi (1):
  arm64: dts: ti: k3-j7200: add DMA support

 .../dts/ti/k3-j7200-common-proc-board.dts     |  45 +++++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  73 +++++++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 118 ++++++++++++++++++
 3 files changed, 236 insertions(+)

Comments

Peter Ujfalusi Sept. 7, 2020, 9:21 a.m. UTC | #1
Hi Grygorii,

On 05/09/2020 2.38, Grygorii Strashko wrote:
> Hi All,
> 
> arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes
> 
> This series adds DT nodes for TI J7200 SoC
> - INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible
>   with J721E Soc, to enable DMA support
> - MCU CPSW2g DT nodes to enable networking
> 
> This series depends on:
>  - [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1]
>    from: Lokesh Vutla <lokeshvutla@ti.com>
>  - [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2]
>    from: Peter Ujfalusi <peter.ujfalusi@ti.com>

you also need to pick:
[PATCH] dmaengine: ti: k3-udma: Use soc_device_match() for SoC dependent parameters [3]

> 
> [1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@ti.com/T/#m141ae4d0dd818518c00c81806d689983d6e832e6
> [2] https://lore.kernel.org/patchwork/patch/1283230/

[3] https://lore.kernel.org/lkml/20200904120009.30941-1-peter.ujfalusi@ti.com/

> 
> Grygorii Strashko (3):
>   arm64: dts: ti: k3-j7200-main: add main navss cpts node
>   arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
>   arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux
>     and phy defs
> 
> Peter Ujfalusi (1):
>   arm64: dts: ti: k3-j7200: add DMA support
> 
>  .../dts/ti/k3-j7200-common-proc-board.dts     |  45 +++++++
>  arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  73 +++++++++++
>  .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 118 ++++++++++++++++++
>  3 files changed, 236 insertions(+)
> 

- P├ęter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki